Vapor Blasting Cabinet for Under $350

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 33

  • @robbidi123
    @robbidi123 หลายเดือนก่อน +2

    Super helpful. Great intro for newbies. Ty!

    • @garagemcmatt
      @garagemcmatt  หลายเดือนก่อน +1

      Thanks for watching

  • @EdgeofEternityBillCameron
    @EdgeofEternityBillCameron หลายเดือนก่อน +1

    First great video I’ve seen on this. Thanks!!

    • @garagemcmatt
      @garagemcmatt  หลายเดือนก่อน +1

      Thanks for watching

  • @ronaldnoorman7755
    @ronaldnoorman7755 2 หลายเดือนก่อน +1

    Thanks for the video very nice setup. I want to build my own one

    • @garagemcmatt
      @garagemcmatt  2 หลายเดือนก่อน +2

      Best tool I have now

    • @ronaldnoorman7755
      @ronaldnoorman7755 2 หลายเดือนก่อน +1

      @@garagemcmatt thanks for video and good explanation 👍🏻 it helped me a lot

    • @garagemcmatt
      @garagemcmatt  2 หลายเดือนก่อน +2

      @@ronaldnoorman7755 thanks for watching

  • @OffRoadRidr
    @OffRoadRidr 8 หลายเดือนก่อน +1

    Pretty cool, will be building my own soon. Thank You

    • @garagemcmatt
      @garagemcmatt  8 หลายเดือนก่อน +1

      Works pretty good bro. Definitely comes in handy

  • @grantguy8933
    @grantguy8933 4 หลายเดือนก่อน +1

    nice work bro. thanks for sharing.

    • @garagemcmatt
      @garagemcmatt  4 หลายเดือนก่อน +1

      @@grantguy8933 thanks bro np

  • @paulbudford
    @paulbudford 8 หลายเดือนก่อน +1

    The results speak for themselves.
    Doing as many builds as you do. It makes sense to do as much coating and prep as you can.

    • @garagemcmatt
      @garagemcmatt  8 หลายเดือนก่อน +2

      Yeah that stuff adds up

  • @nanoblasting
    @nanoblasting 4 หลายเดือนก่อน +1

    good finishing 👍

    • @garagemcmatt
      @garagemcmatt  4 หลายเดือนก่อน +1

      @@nanoblasting ty

  • @ronaldnoorman7755
    @ronaldnoorman7755 2 หลายเดือนก่อน +1

    The waste water is it going back into the water drum mix recycling or going out the drain?

    • @garagemcmatt
      @garagemcmatt  2 หลายเดือนก่อน +2

      It goes out the bottom back into the bucket

  • @Shadowz_660R
    @Shadowz_660R 8 หลายเดือนก่อน +1

    Bro that works surprisingly well great job, I need to build one so I appreciate all the info bro. Just so you know for when you start cerakoteing you need to use 100grit aluminum oxide, that gives the perfect profile for the cerakote to adhere and fill in. Aluminum oxide is definitely expensive so my trick is to use fine coal slag from tractor supply to clean all the parts then I acatone all the parts and swap the media so your only using the AO to give the part the right etch and not to actually clean the parts. Makes the AO last significantly longer. Iv noticed the fine coal slag leaves a very similar etch on softer parts to the AO but cerakote recommends 100grit AO so that's what I use.

    • @garagemcmatt
      @garagemcmatt  8 หลายเดือนก่อน +1

      I'm going to check out Cera coat on my next build I think. I'm have fun with powder coat still but I do plan on trying it out soon

  • @tjhemrick
    @tjhemrick 3 หลายเดือนก่อน +1

    Nice. Don't worry about the comments from the unhappy. Things like Air Compressor etc. are used for other things too so not really an issue when it comes to cost. Way to fab one up DIY style. Which pump did you score from Scamazon? I'd like to compare it to the ones I was looking at.

    • @garagemcmatt
      @garagemcmatt  3 หลายเดือนก่อน +1

      3300 gph on ebay I think it was like $80 of the top of my head. And yeah people like that I just block them and help them move on in life

  • @867diesel
    @867diesel 8 หลายเดือนก่อน +2

    thats perfect dude , cant ask for better . it is as good as it can get . like you said " im a parts hoarder " . im bulding my 2nd 250r basically from all left over parts with the exception of a few things 🤣 . im same on space maybe less or better 🤔🤷‍♂🤣

    • @garagemcmatt
      @garagemcmatt  8 หลายเดือนก่อน +4

      What parts are u missing to build the second one? Send me an email garagemc549@gmail.com
      I probably have what your missing

    • @867diesel
      @867diesel 8 หลายเดือนก่อน +2

      @@garagemcmatt right on , thanks dude

  • @Jesiah-Rod88
    @Jesiah-Rod88 7 หลายเดือนก่อน +1

    I seriously was like, all the idiots that need a diagram, pssssssh. Then you did the diagram and I was like oooh that’s how that works! 😂😂

  • @ALDA2479
    @ALDA2479 8 หลายเดือนก่อน +1

    I was really hoping we could be Pictionary teammates

    • @garagemcmatt
      @garagemcmatt  8 หลายเดือนก่อน +2

      I'm more of a connect 4 guy but I'm down

  • @RejectReality97
    @RejectReality97 7 หลายเดือนก่อน +1

    So really your total cost to get the results you are getting is far more than 350. Got it. Clickbait garbage

    • @garagemcmatt
      @garagemcmatt  7 หลายเดือนก่อน +3

      If you're going to build a vapor blasting cabinet, you should already have an air compressor. Go ahead and buy one for $4000.

    • @garagemcmatt
      @garagemcmatt  7 หลายเดือนก่อน +2

      If your talking about sand blasting, you do not need to do that first. Just clean the part by hand or with a wire wheel.

    • @CRF_RM_XS_CR
      @CRF_RM_XS_CR 4 หลายเดือนก่อน +3

      @@garagemcmatt theres always one! 🤣