When I stumbled upon the Taurus G series, I was actually looking for a Glock. That was during the plandemic, I found the G3 which in my opinion was an inexpensive G17. After falling in love with it, I bought the G2c and when the G3c was announced I pre-ordered it. My lgs was so impressed they sold me one at their cost. After almost 2000rds and 0 malfunctions I trust it with my life daily.
Well it’s a gun that will shoot and the trigger is better. I had a G3. But to all out say that a G3c is better than Glock is insane hate to say about a gun that has proven itself to be reliable.
Well it’s a gun that will shoot and the trigger is better. I had a G3. But to all out say that a G3c is better than Glock is insane hate to say about a gun that has proven itself to be reliable.
@@KuyangJ3h absolutely 👍 very similar to the Glock 👍 Ive only got probably 1k through mine and honestly not one single malfunction 😉 the coating is not even touched on the feed ramp👍
A Glock is like a Honda. A Taurus is like a Hyundai. Glock has a better repuation of reliability but Taurus has gotten better over time and they have a lifetime warranty along with more features for the money.
This is exactly what I did sir, bought 2 of these brand new G3Cs instead of one Glock. Out of the box I cleaned them twice, polished the feed ramps with Flitz, QTips, and Dremel, and cleaned and oiled once again. Shot for the first time yesterday, 50 rounds of 124gr FMJ and 19 rounds of 124 JHP (per gun) -- ran flawlessly.
Love my Taurus G3C and I'm with you regarding a manual safety. I love a gun with one. It just gives you that added sense of security. Thanks much for the review.
GREATEST VIDEO OF ALL TIME!!!! I myself am I Taurus G3C owner (just got it yesterday) and it blows comparable glocks out of the water! Fresh out the box!
I have both taurus and glock 26 definitely doesn’t do anything better than the glock or is better. But it is a good gun especially since you can get them for $230 at most places. I wouldn’t hesitate to bet my life on a g3c or g2c but its not better than a glock. I would say its the best affordable ccw pistol
@Lake_City_Defensive_Training I have one (G3c). The only reason I keep it is because it goes “bang” every time. I hate the trigger. Not at all fun to shoot.
Ummm... did you fire it before your comment? Just curious. I put 1,000 plus through it asap. 2 light primer strikes. But that was about 200 rds. in. I love mine. No issues once broken in. Its e.d.c. for me.
RE: your getting only two of the expected three magazines with your G3C. Check the box that it came in more throughly. I seem to recall that either Honest Outlaw or Mr. Guns and Gear thought the same thing and later found it under the cardboard in the bottom of the box. I hope that you do also. A great review by-the-way. First time viewer. I re-upped for more. Thank you. Very humorous, by the way. 😂
ALWAYS check under the cardboard with Taurus! They like to hide magazines, extra sights and maybe another grip under there. Always a nice surprise! {!-{>
Great Video! Love the comments! I wanted one back when it was G2C but investigated and waited on the 3’s to come out because of triggers and sights. Have a G3 with light for my wife’s house gun and G3C and now a G3X which is my carry
The Taurus wins. The trigger is better, the sights are better, and the ergonomics are better. FOR LESS MONEY😂😂AND 3 12 ROUND MAGS OUT THE BOX??? Too easy if you ask me 😂 I have a g19gen 4 and a glock 17 Gen 4 btw so dont go saying i dont have a glock i do agree the finish is better on the glock tho but i dont really care too much about finishes.
Bingo, on every point you made. I too have both guns, but my Glock is the gen 5 G19 (mos). My g3c is better for every reason you mentioned and was half the price. The grip is grippier, recoil impulse is smoother, slide racks easier, I personally think the trigger is better, and let's not forget the sights are metal. All this for half the price of the g19.
Man I've said the exact same thing several times. I'd take the grip, accuracy, looks and recoil Impulse of my G3 and G3C over my Glock all day long! I can shoot groups with my G3 that are insane, and at distances well beyond the norm for self defense training. My Glock is accurate and reliable of course but I've also put tons of ammo through all of my Taurus pistols and I've had zero issues ever.
I’ve never had a Bad Guy say. You sure have a PRETTY GUN. If your Taurus is scuffed up that gives it character. It’s not a show gun. It’s a reliable tool.
The cost is great, but I recommend going to Lakeline LLC and changing out the plastic parts. I have a G2C and full-size G3, and it's pretty easy to do. I swap the recoil springs and steel striker guides as well...
Mine has 6,850 rounds through a completely stock without a single malfunction. The guide rod is fine you can upgrade it if you want. But you don't need to..
I would like to shoot one of these. I would like to try several. The G3C, I have heard of a GX4. I like "Micro"-smaller pistols as I print very easy. I would love a Sig P376 that felt like a medium or full size. I have serious weakness due to post traumatic & surgical injuries. I think size, the ability to manage the pistol-I do not want to shoot something I can not handle with confidence or is uncomfortable. You mentioned external safety`s. On certain pistols I would like one. I like the safety that is slightly recessed into the pistol. I have an external safety on my Taurus TX-22. They are made with or without. I simply ignore it as I only use my (2) 22lr pistols for range time. My 9 mm pistols do not have them. I would like a small / compact 9 mm with an external safety. This would allow me to feel more confident, in the event I were to carry it in a bag, pocket, ankle holster-or even a belly band. Sometimes I am not comfortable with my 9mm not having a safety for several reasons. Great video, Thank you, God bless.
You are absolutely correct! G3c over Glock, especially the price after upgrades! Price wise, I paid $220 for the g3c and after upgrades to the sights,guide rod,striker and slide plate cover. I'm at $400!! The g3c cycles hollow points flawlessly for all the haters after upgrades and the trigger pull is also way better after upgrades. So many more reasons why g3c is better. Don't knock it till you experience for yourself
IVE BEEN TELLING ALL THE GLOCK FANBOYS ON TH-cam THAT THEY REALLY NEED TO QUIT DOGGING tAURUS AND GO SHOOT THE g2 OR g3C AND THEY WILL CGHANGE THEIR MNDS. Its nice to see some of yall are mature and honest enough to admit it
I like stock Glocks and cannot lie. 🎵 You other clones should not try.🎵🎵 Love my G43X MOS. Shoots like a laser. Appreciate the review and your opinion. Guns are like ice cream - choose the flavor you enjoy best.
I am sure you figured this out, but the third mag is under that triangular box thing in the box - the only place it fits.... I have Glocks and G3's - and I like them all. The G3C does feel really nice in my hand and shoots and operates great. I would say that it's easier to shoot well than my Glocks.
G3C is my carry for the past 9 months- I have put around 600 rounds through it and not one malfunction. I actually more accurate with it than the Hellcat
I have the Taurus G3 model without the external safety, which is exactly what I wanted. An external safety for me is only good if it’s ambidextrous set up. Well for the price point it’s a good pistol, the trigger has so much slack take up in it that it makes the breakpoint almost all the way back to the rear of the trigger guard. I replaced the factory front sight with a night sight. I think they feel better in the hand than a Glock, but I don’t know in terms of long-term reliability which one is better. However, I’m guessing the vast majority of pistol owners never shoot their guns enough to wear out a pistol.
I have purchased my first 9mm guns this Spring (only had a Ruger 1911 .45 before). First was a S&W Shield Plus, then a G3C, then a Glock 26 Gen 5. In order of preference I say it is the Glock, the Shield, then the Taurus from best to worst. They all have their good points; the Glock feels the best and shoots the smoothest. The Shield is the best for concealed carry due to the thin profile and has the grip texture I like best. The Taurus also fits great in my hand, and came in at the best price by far. ($539 Glock, $449 Shield, $209 on sale for the G3C.) I hate the trigger on the G3C; I plan on changing that out. The other two will stay stock. Overall I am very happy with all three purchases, love them all for what each is, and would trust each of them 100% in a self defense shooting situation. Figure out what you like, and go with your gut feeling is what I found to work for me. Thanks for a thought provoking video!
I bought a Glock 17 security 380 ruger. Sheild 40 compact. Tarus 605 357 a g3c and a g2c. I like them all each one has its own applications. But my G3c survived a car crash did not go off when it went flying against the dash board. So yeah they are definitely worth grabbing for the price.
As both a Taurus and glock owner the Taurus doesn’t even touch my Glocks they are far better in every single way than my Taurus which is the reason I own multiple Glocks and won’t even consider a second Taurus.
With a glock you buy once and you cry once, with the cheaper guns you don't really know how they can hold up. Like canik for example, the mc9 isn't the only model that has a problem. Lots of people are experiencing problems with their other models after putting 1000 rounds through, even hears people putting 400 rounds through and are now having problems with them. Guns aren't operating systems that need to be updated all the time... Glocks have been proven over the years to be reliable, so for a 1st gun a glock would be the best choice. For 2nd guns or guns for the range you should try other brands but for a do it all with years of testing... Glocks should be a 1st and not just for beginners... Everyone should have one in their collection. Lots of people bad mouth glock but every brand tries their best to compete with it and for a reason... Everyone wants to be king...
I own quite a few guns and 3 of those are Taurus. 1911, GX4 and G2c. I don't carry the G2c because of the garbage trigger that likes to hang up if you don't pull it perfectly straight back. I plan on trading it in towards the G3c for that reason.
I bought a taurus because it was cheaper and had a manual safety and loaded chamber indicator. Its a great gun with thr exception of the finish. It scratches really easy. But functionally its a great gun. The ergonomics are good as well.
I loved my g3c. Bought a smith n wesson mnp sheild 40 compact. So my G3C went to my son. I did not want to sell it. So my son got an early christmas present the tarus. So it still lives here in the house. I have a G17 gen 3 to and a ruger security 380 and a tarus 305 357. Love em all. I like to have various brands. Each one has a diffetent aplication.
I own a G3c and have shot Glock. I agree. Glocks are very good guns and Glock has been the "inspiration" for similar guns by countless competitors. However, I believe they are overpriced. That is my main issue. Nothing is exceptional about Glocks and definitely they are not "perfection" out of the box. The G3C will serve just as well for much lesss money and I think it feels much better in hand. The finish is pretty bad on the Taurus though, and should be better.
Grew up shooting a Taurus. Now I own a G26. Both are great. Just depends on what you wanna do with you money. I like the G26 because you can add an extended mag like a G19 15 round mag and the pinky grip extension to it. Make it comfortable to conceal and shoot. However this videos makes me wanna go buy a Taurus again. Haha
I put about 300 bucks into my G3c maybe a little more with steel lakeline parts and a black nitride threaded barrel. Love it, with a grip from hogue is awsome as well.
Have had 5 Glocks and never changed anything on them. They are great guns. I am going to buy a Taurus G3X simply because it is chaaper and smaller than buying another Glock 19.
I pick my Taurus G series pistols over my Glock all the time. Better grip, accuracy, recoil Impulse and looks. They've been every bit as reliable and I've put more rounds through each one than most people would shoot probably ever and have had zero issues. I e left them completely stock on the inside and nothing has worn out or broke. How can anyone knock that unless they're just trying to feel better about spending 6-700 hundred dollars for a pistol thats no better than a Taurus.
I have owned a Taurus , a 24/7 pro in 45 acp . I never had a malfunction but the one thing i did not like about it was the fact that the stippling was inadequate . It would slip in my hand even with a firm grip. Even with this issue, i would still choose the Taurus over a glock any day. Guys who want an accessory buy glocks. Men who want reliability and accuracy choose a Sig .
Love it bc of the thumb safety don't know how many people I've seen "cheddar bob" themselves with Glocks n other pistols that doesn't have a manual safety I feel safer with 1 in th pipe knowing it won't just go off and blow the twins off 😭😭 LMAO
The frame pins walk out even on a new G3C. The slide slams forward when you aggressively tap in a mag. Not all but some of these need the ramp polished to accept hollow points. The plastic internals degrade the trigger pull but Lakeline LLC sells stainless steel recoil springs and firing pin retainers (great upgrade). The finish wears out very quickly. It’s prob not going 50,000+ rounds like a Glock. That said I love the G3C. I carry it because it’s stone cold reliable. I’m not worried about it if it gets sweaty, or in the rain or salty conditions on the beach. It’s definitely a Hyundai but it works. It’s hard to get past the reputation of Taurus but it’s hard to argue against the G3C.
i have the taurus g3 (not C) and a 43x. i love both of them. but the trigger, while better than most glocks, is not as light as the g3. i also have had 1 malfunction every 50 or so rounds on the 43x, after about 700 rounds its beginning to break in, become more accurate, and i havent had any malfunctions in a while. i have about a thousand rounds through the g3 with not a single malfunction, but i can tell its WELL broken in. as if its wearing out faster than the glock does. the sights on both arent great. ive upgraded the glock to tru glo sights and the taurus i eventually wll upgrade to a red dot slide. i regularly shoot them side by side and the accuracy between the 2 is identical. some of the things you mentioned i was shaking my head so hard at. such as the safety. to be fair ive seen people complain that the g3 HAS a safety but its such an innocuous issue you can just never use it if you dont like it. i pocket carry the 43x EVERY day and i take it to the range every friday. i handle it loaded often and i just know to never mess with the trigger. not having a safety is a total non-issue.
i bought a 43x for 540 for my first gun, but had i done a bit more research and knew of the g3c i would of gotten the g3c for sure. its half the price but comes with way more.
Shoot a taurus 15,000 rounds and shoot a glock 15,000 rounds. You'll find out quick which one is killed! Glock is from a era when pistols were built to last a life time. Now a days manufactures only care about a gun that makes it through the first few hundred to thousand rounds. That's how many rounds most guns will be shot through their lifetime. A quick seach of extreme high round count pistols (50,000+) will show you a pattern. It's almost all glocks. After shooting 15,000 dollars + in ammo from a pistol without issues the extra 250 bucks you paid goes out the window.
@@Flaco817they're cheap because they're not ridiculously marking them up mine has 6,850 rounds through it without a single malfunction. My friend just bought a Glock 26 and he can't get through a single magazine without a malfunction. The Taurus is better all day long especially better than the Glock 26
@@speedygonzales8144 tuares has allways been a cheap gun/ company no matter what it’s budget friendly for a reason I have a g2c. There great but shtf id grab a Glock 17 or 19 not a g2c or g3 that Glock 26 your friend has is malfunctioning because of the magazine most likely.
@@speedygonzales8144 I’m not hating on tuares but for someone to make a video start 💩 by saying taures is better then Glock that’s like saying a hi point is better then sig sauer cmon bro it’s common sense if you no about firearms you should no by know. Glocks are used all of the world by law enforcement military contractors. Not taures it’s for good reasons you said it yourself in your own words no taures is gonna withstand torture like Glocks do and they still fire yes tuares did get better by copying Glock like other gun manufacturers.
@Flaco817 Glock has been around longer then the current Taurus company. But that gun is better than a Glock 26 by far hands down. And Taurus is used buy police and military all over the world. Spain Brazil Saudi Arabia are just some of the countries that use Taurus. Taurus started off as a small Gun Company making crappy revolvers. But now they make high-grade weapons for militaries all over the world. They even make rockets and Rocket guidance systems. They make a machine gun and rifles we just can't get them here. The problem is that Glock Fanboys like yourself can't fathom anything other than a Glock. When it's literally the most outdated polymer frame Striker fire there is.. my Taurus has 6,850 rounds through it without a single malfunction. My 1100 Sig was malfunctioning straight out of the box I was getting jams it worked itself out but the Taurus has never jammed. My high-end 1911s wood jam from time to time but the Taurus never jams I have a nice Beretta and once in awhile I'll get them malfunctioned. But the Taurus keeps running. Don't worry you can still masturbate with your Glock but there is better stuff out there
I picked mine up for $215 in an online deal. It is a well-engineered but simple and trustworthy design...literally a Glock for half of the price. It's not my EDC, but after 300+ rounds and no misfires, I trust it with my life. Lastly, it shoots like hot butter on stiff toast. If you're on the fence, just buy one and thank us later.
I've fed all kinds of ammo through my G3C and it hasn't had any problems. I was concerned about reports that it had trouble cycling hollow-points, so the first thing I did was take it straight to the range right after buying it (did not clean it, did not lubricate it) and fired a couple mags of HP through it (two different brands), and it had no trouble at all.
All you need to do to make your Glock better is a handle it grip and a red permanent marker to color in the white dot on the front sight honestly it really helps and I call it my hillbilly Red Dot😂😂 hollows over balls 24/7 funny you talk about glocks no manual safety. My first gun( even though i was a glock hater) was a glock 43. Next to the m&p it fit my hand the best. I was nervous to carry one in the chamber appendix. So the first day i carried a empty gun. Just to see if i would even like it. The next day i loaded the mag carried it. Then the 3rd day i put one in the chamber and proceeded to drop it because glocks stippling sucks.(handle it grips are amazing) but it didn't go off so i stuck it in my holster jumped up and down like a fool. That satisfied me enough that the jewels would be safe!!!
@DaGunGuy yeah I kind of wish, I would have used an orange permanent marker after I did it, but the red worked really well. Also, with the handle it grips, they have the skateboard grip sandpaper like tape. and then they have a softer cushiony grip cover as well, but I trust sandpaper more than cushion grip, so I went with the sandpaper. Kind of want to try the other one as well.
Glocks are excellent firearms (a bit pricey though), but if your budget won’t allow you to get a Glock, the G3C is an excellent firearm, and there is absolutely nothing wrong with it. Having both, I shoot them both very well, and the G3C uses Glock sights, so you can replace them if you want.
I don't think anything will ever kill the glock line! I'm not a fan! But they work just have a awkward grip for my hand! But great pistols if you get used to it!
Yes, a few upgrade parts make the G3c even better. The recoil guide/spring and striker guide upgrade parts for my G3c are stainless steel. I believe those original parts on a Glock are polymer and plastic (same as the original Taurus parts). All in, I'm very happy with the price and performance of the G3c.
If u hate glock so much why are u comparing everything to glock🤔 that says a lot about Glock...also it's not optic ready is why it's so cheap no thanks
They hate and people like the one posting the video for attention and views hate on Glocks there’s tons of people that take a cheap gun and compare or say it’s better never that u never see them comparing it with a Canik or sig sauer
The g3c was the first pistol I owned when I moved to a free state I was pretty broke wanted something I could defend family home right away. It’s a perfectly serviceable firearm. Fast forward a few years I carry the 43x. Much much better pistol. Again if the Taurus is all you can afford it’ll work but the fit and finish is laughable compared to the glock. Mine also was very picky with hollow points. I had to polish the feed ramp and chamber it helped but didn’t fix the issue. Love them or hate them glocks will fire just about everything every time. I also think the trigger on the 43x is much better it’s shorter and crisper it’s heavier but I think overall it’s a less vague trigger. Sights are preference I don’t mind the glock sights personally I know many people do. I’m not a fan boy i carry the 43x but I don’t really own a bunch of glocks there not my favorite or anything.
Nice reasonable gun which i do have and my daughters carry, now I have other brands CZ love ruger been solid for me for over 25 years Glock A1 trust in them but you have to customize them to your liking the reliability is amazing far as looks the same chic just one bigger than the others G3 cool but Glock killer good for clicks if they don’t know anything I knew it was more about the price which you should have just said, now that GX4 carry is a game changer but we all like what we like I’m not into to downing other brands or anything others like because my guns are for me to like.
Any resolve to your problem or question? It's a common occurrence. Try x1 or x2 less rounds in the mag and see how it cycles. Polish the crap out of your feed ramp. Something about the full mag and tension make the first two rounds nose dive into the feed ramp. A
Taurus continues to improve greatly. The G3 and G3c are simply amazing imo. The G4 may be closer to a Glock “killer”, but I prefer the G3 line… it is very fairly priced, offers a manual safety and the double strike capability is first class. Those features are why I have not considered the G4. Just my preference. Glock still rules though. Variety and almost unlimited upgrades.
I highly prize my Glock and have done a lot to it over the years. I also highly prize my M&P with all of its accessories and extra features. But I will always love my humble little Taurus G3c for simply being a creat gun that I was able to pick up for just $220. It sits amongst kings. I don’t waste my money on garbage.
Yeah, it's so wonderful that after a couple hundred rounds, I got rid of it as fast as I could! All this glowing feedback sounds like paid promotion to me.
Yeah, that must be it... It's not that Taurus makes good guns, it's that EVERYBODY WHO OWNS ONE is getting paid by Taurus to say nice things about them! 😂
Pick one of these up they're under 300 bucks and I guarantee you you'll like it.. I like it better than the Glock 26 by far. I do like the Glock 48, . But I'll still pick the Taurus
I wouldn’t call it the Glock killer but I got my g3c for a good price. It is probably one of the best affordable pistols for a couple hundred bucks. Even if you own HKs, Glocks, and other high end guns, it’s hard to overlook the g3c.
From a functionality standpoint I'd agree that the G3C is just as good as a Glock. I'm not a Glock fanboi, I'm a Sig fanboi. BUTT, and this is a biiig hairy butt, Glock finishes are better than what Taurus uses. The metallurgy is probably better, The polymer quality is probably better. I have three Taurus hanguns. A TCP, GX4, and a 856UL. I recently sold my 692 to buy a P239. I've owned a G2C and a G3C and liked them both, sold/traded them for things I wanted more. If someone offered a 357Sig barrel for the G3C (hint, hint, Lakeline), I would dither around about selling one of my guns to get one.
@@jdrussell8916 My G2c is in my rotation along with a Bersa TPR9C. I like the TPR9C the best and its my favorite sub compact. When I got the G2c, I got it as a backup to the TPR9C. But even sub compacts can be on the large size for summer carry in hot weather with light clothing so for summer carry I go with the SIG P365 micro compact. All three of these pistols are accurate and still flawless past 600 rounds. BTW, I don't own a Glock but then again I won't own any striker fired pistol without a manual safety.
I’ve owned a few Taurus and a few Glocks. Yes the Taurus does have better ergos and it’s cheaper. They are good guns for the money. Are they a Glock killer?, absolutely not. Glock is a more heavy duty ready for war gun. They use a thicker steel and has a more premium feel. Taurus are great lil guns too tho, but just remember, there are reasons that it’s cheaper. Cheaper metals, parts etc. it’s just facts. They both are really good guns, but comparing a Taurus to a Glock is unfair in my opinion. 2 different classes of firearms. Buy once, cry once. Live by it baby!!! 😂
You put Taurus an absolute crap company in the same sentence as the most relied upon sidearm in history. Apparently you need more firearms experience mate
I own a G3C AND I really don't think Glock's are all that great. However, I also know Taurus is NOT better than Glock. People that say otherwise are delusional...
Taurus is an OK gun but will never kill glock, glock has something over taurus anyday and that is Reliability, my friend owns a G3C and it doesn't like hollow points, FMJs are ok, but once you go to selfdefense, get ready to practice malfunctions...
@Luthiart actually sample size were 3 they are just picky with ammo bro, that's why you can get them sub 200 guns... they are hot trash... the revolvers are good to go, not the pistols
When I stumbled upon the Taurus G series, I was actually looking for a Glock. That was during the plandemic, I found the G3 which in my opinion was an inexpensive G17. After falling in love with it, I bought the G2c and when the G3c was announced I pre-ordered it. My lgs was so impressed they sold me one at their cost. After almost 2000rds and 0 malfunctions I trust it with my life daily.
@@jimthegatekeeper59 g3 is the same size as a g19... Not g17
Well it’s a gun that will shoot and the trigger is better. I had a G3. But to all out say that a G3c is better than Glock is insane hate to say about a gun that has proven itself to be reliable.
Well it’s a gun that will shoot and the trigger is better. I had a G3. But to all out say that a G3c is better than Glock is insane hate to say about a gun that has proven itself to be reliable.
@@hozaeward4640 send me your address...... I'll forward you a box of Kleenex
@@hozaeward4640LOL ok well mine was better than the 2 glocks I shot against
The Taurus G3C is a good pistol, plain and simple.
Just bought a g3c and a Glock 19 gen 5. Sold my Glock 36.
I've had my (G3) for 4 years now and love it !!!!!
@@bruno8241 i'm planning to buy one soon. are the internal part durable? just curious
@@KuyangJ3h absolutely 👍 very similar to the Glock 👍 Ive only got probably 1k through mine and honestly not one single malfunction 😉 the coating is not even touched on the feed ramp👍
A Glock is like a Honda. A Taurus is like a Hyundai. Glock has a better repuation of reliability but Taurus has gotten better over time and they have a lifetime warranty along with more features for the money.
This is exactly what I did sir, bought 2 of these brand new G3Cs instead of one Glock. Out of the box I cleaned them twice, polished the feed ramps with Flitz, QTips, and Dremel, and cleaned and oiled once again. Shot for the first time yesterday, 50 rounds of 124gr FMJ and 19 rounds of 124 JHP (per gun) -- ran flawlessly.
Love my Taurus G3C and I'm with you regarding a manual safety. I love a gun with one. It just gives you that added sense of security. Thanks much for the review.
GREATEST VIDEO OF ALL TIME!!!! I myself am I Taurus G3C owner (just got it yesterday) and it blows comparable glocks out of the water! Fresh out the box!
TYVM
I have both taurus and glock 26 definitely doesn’t do anything better than the glock or is better. But it is a good gun especially since you can get them for $230 at most places. I wouldn’t hesitate to bet my life on a g3c or g2c but its not better than a glock. I would say its the best affordable ccw pistol
@Lake_City_Defensive_Training I have one (G3c). The only reason I keep it is because it goes “bang” every time. I hate the trigger. Not at all fun to shoot.
Ummm... did you fire it before your comment? Just curious. I put 1,000 plus through it asap. 2 light primer strikes. But that was about 200 rds. in. I love mine. No issues once broken in. Its e.d.c. for me.
All my Glocks are right out the box and I shoot them very well. I am not a Glock “fan boy” but I do like them
Thanks Sir for this video, I got my Taurus G3 last year, I've fired more than 1000 rounds and never fails or jammed, best gun Taurus G3!❤
Solid gun, you can't beat it
RE: your getting only two of the expected three magazines with your G3C. Check the box that it came in more throughly. I seem to recall that either Honest Outlaw or Mr. Guns and Gear thought the same thing and later found it under the cardboard in the bottom of the box. I hope that you do also.
A great review by-the-way. First time viewer. I re-upped for more. Thank you. Very humorous, by the way. 😂
ALWAYS check under the cardboard with Taurus! They like to hide magazines, extra sights and maybe another grip under there. Always a nice surprise! {!-{>
Great Video! Love the comments! I wanted one back when it was G2C but investigated and waited on the 3’s to come out because of triggers and sights. Have a G3 with light for my wife’s house gun and G3C and now a G3X which is my carry
Maybe not a Glock killer, but it is a darn good gun for the money. It is the gun for the people. Almost anyone with a job can afford one.
The Taurus wins. The trigger is better, the sights are better, and the ergonomics are better. FOR LESS MONEY😂😂AND 3 12 ROUND MAGS OUT THE BOX??? Too easy if you ask me 😂 I have a g19gen 4 and a glock 17 Gen 4 btw so dont go saying i dont have a glock i do agree the finish is better on the glock tho but i dont really care too much about finishes.
Bingo, on every point you made. I too have both guns, but my Glock is the gen 5 G19 (mos). My g3c is better for every reason you mentioned and was half the price. The grip is grippier, recoil impulse is smoother, slide racks easier, I personally think the trigger is better, and let's not forget the sights are metal. All this for half the price of the g19.
Man I've said the exact same thing several times. I'd take the grip, accuracy, looks and recoil Impulse of my G3 and G3C over my Glock all day long! I can shoot groups with my G3 that are insane, and at distances well beyond the norm for self defense training. My Glock is accurate and reliable of course but I've also put tons of ammo through all of my Taurus pistols and I've had zero issues ever.
I’ve never had a Bad Guy say. You sure have a PRETTY GUN. If your Taurus is scuffed up that gives it character. It’s not a show gun. It’s a reliable tool.
Get a Taurus n a 1000 rds to practice, the Glock owner hasn't even bought ammo yet
Hahahahahaha
The cost is great, but I recommend going to Lakeline LLC and changing out the plastic parts. I have a G2C and full-size G3, and it's pretty easy to do. I swap the recoil springs and steel striker guides as well...
Mine has 6,850 rounds through a completely stock without a single malfunction. The guide rod is fine you can upgrade it if you want. But you don't need to..
Lakelines awsome, got a bunch of parts from them. Good customer service too.
I would like to shoot one of these. I would like to try several. The G3C, I have heard of a GX4. I like "Micro"-smaller pistols as I print very easy. I would love a Sig P376 that felt like a medium or full size. I have serious weakness due to post traumatic & surgical injuries. I think size, the ability to manage the pistol-I do not want to shoot something I can not handle with confidence or is uncomfortable. You mentioned external safety`s. On certain pistols I would like one. I like the safety that is slightly recessed into the pistol. I have an external safety on my Taurus TX-22. They are made with or without. I simply ignore it as I only use my (2) 22lr pistols for range time. My 9 mm pistols do not have them. I would like a small / compact 9 mm with an external safety. This would allow me to feel more confident, in the event I were to carry it in a bag, pocket, ankle holster-or even a belly band. Sometimes I am not comfortable with my 9mm not having a safety for several reasons. Great video, Thank you, God bless.
I would say that the entire Taurus G3 line is Glock-killers.
Sometimes they put the extra magazine under the cardboard of the box. It should lift up
“Keep Tinkering” Trigger upgrade makes it a whole new fun toy!!!
They would get a lot more business if they put better slide finish on. They run good
You are absolutely correct! G3c over Glock, especially the price after upgrades! Price wise, I paid $220 for the g3c and after upgrades to the sights,guide rod,striker and slide plate cover. I'm at $400!! The g3c cycles hollow points flawlessly for all the haters after upgrades and the trigger pull is also way better after upgrades. So many more reasons why g3c is better. Don't knock it till you experience for yourself
I own both a Glock 19 and the g3c, after about 1000 rds through each handgun, I can honestly say I prefer the g3c for edc and homenprotection
IVE BEEN TELLING ALL THE GLOCK FANBOYS ON TH-cam THAT THEY REALLY NEED TO QUIT DOGGING tAURUS AND GO SHOOT THE g2 OR g3C AND THEY WILL CGHANGE THEIR MNDS. Its nice to see some of yall are mature and honest enough to admit it
I like stock Glocks and cannot lie. 🎵 You other clones should not try.🎵🎵 Love my G43X MOS. Shoots like a laser. Appreciate the review and your opinion. Guns are like ice cream - choose the flavor you enjoy best.
I have the G2C my self I have put over 1000 rounds through it no problems whatsoever. I love my taurus G2C paid 223.00 for the gun tax and shipping
I am sure you figured this out, but the third mag is under that triangular box thing in the box - the only place it fits.... I have Glocks and G3's - and I like them all. The G3C does feel really nice in my hand and shoots and operates great. I would say that it's easier to shoot well than my Glocks.
G3C is my carry for the past 9 months- I have put around 600 rounds through it and not one malfunction. I actually more accurate with it than the Hellcat
I have the Taurus G3 model without the external safety, which is exactly what I wanted. An external safety for me is only good if it’s ambidextrous set up. Well for the price point it’s a good pistol, the trigger has so much slack take up in it that it makes the breakpoint almost all the way back to the rear of the trigger guard. I replaced the factory front sight with a night sight. I think they feel better in the hand than a Glock, but I don’t know in terms of long-term reliability which one is better. However, I’m guessing the vast majority of pistol owners never shoot their guns enough to wear out a pistol.
I have purchased my first 9mm guns this Spring (only had a Ruger 1911 .45 before). First was a S&W Shield Plus, then a G3C, then a Glock 26 Gen 5. In order of preference I say it is the Glock, the Shield, then the Taurus from best to worst. They all have their good points; the Glock feels the best and shoots the smoothest. The Shield is the best for concealed carry due to the thin profile and has the grip texture I like best. The Taurus also fits great in my hand, and came in at the best price by far. ($539 Glock, $449 Shield, $209 on sale for the G3C.) I hate the trigger on the G3C; I plan on changing that out. The other two will stay stock. Overall I am very happy with all three purchases, love them all for what each is, and would trust each of them 100% in a self defense shooting situation. Figure out what you like, and go with your gut feeling is what I found to work for me. Thanks for a thought provoking video!
I bought a Glock 17 security 380 ruger. Sheild 40 compact. Tarus 605 357 a g3c and a g2c. I like them all each one has its own applications. But my G3c survived a car crash did not go off when it went flying against the dash board. So yeah they are definitely worth grabbing for the price.
As both a Taurus and glock owner the Taurus doesn’t even touch my Glocks they are far better in every single way than my Taurus which is the reason I own multiple Glocks and won’t even consider a second Taurus.
With a glock you buy once and you cry once, with the cheaper guns you don't really know how they can hold up. Like canik for example, the mc9 isn't the only model that has a problem. Lots of people are experiencing problems with their other models after putting 1000 rounds through, even hears people putting 400 rounds through and are now having problems with them. Guns aren't operating systems that need to be updated all the time... Glocks have been proven over the years to be reliable, so for a 1st gun a glock would be the best choice. For 2nd guns or guns for the range you should try other brands but for a do it all with years of testing... Glocks should be a 1st and not just for beginners... Everyone should have one in their collection. Lots of people bad mouth glock but every brand tries their best to compete with it and for a reason... Everyone wants to be king...
Hey yes the Glock always goes bang
You’ll appreciate the grip on a full size G3. 15 and 17 round mags
Taurus has 17 rd. mags for the G3c, now. 👍🏽💪🏾
Not a Glock fan big into Smith and Wesson and Ruger
Have u shot any Ruger American pistols in 45acp if so what are your thoughts
I own quite a few guns and 3 of those are Taurus. 1911, GX4 and G2c. I don't carry the G2c because of the garbage trigger that likes to hang up if you don't pull it perfectly straight back. I plan on trading it in towards the G3c for that reason.
trim the little paddle on the trigger safety...... problem solved
Thanks for the video! I'm deciding between the g3c and the g3x. I'm leaning towards the second one.
I’m honestly a Ruger, smith, Taurus and Springfield fan.
I bought a taurus because it was cheaper and had a manual safety and loaded chamber indicator. Its a great gun with thr exception of the finish. It scratches really easy. But functionally its a great gun. The ergonomics are good as well.
Glock is over rated ughhh I love my G2C
I loved my g3c. Bought a smith n wesson mnp sheild 40 compact. So my G3C went to my son. I did not want to sell it. So my son got an early christmas present the tarus. So it still lives here in the house. I have a G17 gen 3 to and a ruger security 380 and a tarus 305 357. Love em all. I like to have various brands. Each one has a diffetent aplication.
The overall impression about the g3c is great. though i am still worried about its durability of internal parts.
I own a G3c and have shot Glock. I agree. Glocks are very good guns and Glock has been the "inspiration" for similar guns by countless competitors. However, I believe they are overpriced. That is my main issue. Nothing is exceptional about Glocks and definitely they are not "perfection" out of the box. The G3C will serve just as well for much lesss money and I think it feels much better in hand. The finish is pretty bad on the Taurus though, and should be better.
Grew up shooting a Taurus. Now I own a G26. Both are great. Just depends on what you wanna do with you money. I like the G26 because you can add an extended mag like a G19 15 round mag and the pinky grip extension to it. Make it comfortable to conceal and shoot. However this videos makes me wanna go buy a Taurus again. Haha
I put about 300 bucks into my G3c maybe a little more with steel lakeline parts and a black nitride threaded barrel. Love it, with a grip from hogue is awsome as well.
Have had 5 Glocks and never changed anything on them. They are great guns. I am going to buy a Taurus G3X simply because it is chaaper and smaller than buying another Glock 19.
I pick my Taurus G series pistols over my Glock all the time. Better grip, accuracy, recoil Impulse and looks. They've been every bit as reliable and I've put more rounds through each one than most people would shoot probably ever and have had zero issues. I e left them completely stock on the inside and nothing has worn out or broke. How can anyone knock that unless they're just trying to feel better about spending 6-700 hundred dollars for a pistol thats no better than a Taurus.
Is this Taurus compatible with a switch
I have owned a Taurus , a 24/7 pro in 45 acp . I never had a malfunction but the one thing i did not like about it was the fact that the stippling was inadequate . It would slip in my hand even with a firm grip. Even with this issue, i would still choose the Taurus over a glock any day. Guys who want an accessory buy glocks. Men who want reliability and accuracy choose a Sig .
The Taurus G3C is a great firearm. It was my edc for over a year until I got the GX4, which in my opinion is better than a P365 every day of the week.
Love it bc of the thumb safety don't know how many people I've seen "cheddar bob" themselves with Glocks n other pistols that doesn't have a manual safety I feel safer with 1 in th pipe knowing it won't just go off and blow the twins off 😭😭 LMAO
Love my Taurus G3C very reliable no malfunction as yet blown all the rounds I feed it with
What do you think of the new Taurus 10mm
Just got a G3C. First hollow point it jammed. It had 5 failure to feeds with HP in 50 rounds. FMJ was great
The frame pins walk out even on a new G3C. The slide slams forward when you aggressively tap in a mag. Not all but some of these need the ramp polished to accept hollow points. The plastic internals degrade the trigger pull but Lakeline LLC sells stainless steel recoil springs and firing pin retainers (great upgrade). The finish wears out very quickly. It’s prob not going 50,000+ rounds like a Glock.
That said I love the G3C. I carry it because it’s stone cold reliable. I’m not worried about it if it gets sweaty, or in the rain or salty conditions on the beach.
It’s definitely a Hyundai but it works. It’s hard to get past the reputation of Taurus but it’s hard to argue against the G3C.
i have the taurus g3 (not C) and a 43x. i love both of them. but the trigger, while better than most glocks, is not as light as the g3.
i also have had 1 malfunction every 50 or so rounds on the 43x, after about 700 rounds its beginning to break in, become more accurate, and i havent had any malfunctions in a while. i have about a thousand rounds through the g3 with not a single malfunction, but i can tell its WELL broken in. as if its wearing out faster than the glock does. the sights on both arent great. ive upgraded the glock to tru glo sights and the taurus i eventually wll upgrade to a red dot slide. i regularly shoot them side by side and the accuracy between the 2 is identical. some of the things you mentioned i was shaking my head so hard at. such as the safety. to be fair ive seen people complain that the g3 HAS a safety but its such an innocuous issue you can just never use it if you dont like it. i pocket carry the 43x EVERY day and i take it to the range every friday. i handle it loaded often and i just know to never mess with the trigger. not having a safety is a total non-issue.
I wouldn’t go that far. But I love my G3C, as well as the Glocks I’ve carried for 25 years.
i bought a 43x for 540 for my first gun, but had i done a bit more research and knew of the g3c i would of gotten the g3c for sure. its half the price but comes with way more.
Low key you are hilarious and your editing reminds me of RLM, perfect timing.
I appreciate that!
I don’t even like glock so much, but even though, I can say that is one of the best handguns in the world
Shoot a taurus 15,000 rounds and shoot a glock 15,000 rounds. You'll find out quick which one is killed!
Glock is from a era when pistols were built to last a life time. Now a days manufactures only care about a gun that makes it through the first few hundred to thousand rounds. That's how many rounds most guns will be shot through their lifetime.
A quick seach of extreme high round count pistols (50,000+) will show you a pattern. It's almost all glocks.
After shooting 15,000 dollars + in ammo from a pistol without issues the extra 250 bucks you paid goes out the window.
Thank you for the people saying that a cheap tuares is better there’s reasons why there cheap
@@Flaco817they're cheap because they're not ridiculously marking them up mine has 6,850 rounds through it without a single malfunction. My friend just bought a Glock 26 and he can't get through a single magazine without a malfunction. The Taurus is better all day long especially better than the Glock 26
@@speedygonzales8144 tuares has allways been a cheap gun/ company no matter what it’s budget friendly for a reason I have a g2c. There great but shtf id grab a Glock 17 or 19 not a g2c or g3 that Glock 26 your friend has is malfunctioning because of the magazine most likely.
@@speedygonzales8144 I’m not hating on tuares but for someone to make a video start 💩 by saying taures is better then Glock that’s like saying a hi point is better then sig sauer cmon bro it’s common sense if you no about firearms you should no by know. Glocks are used all of the world by law enforcement military contractors. Not taures it’s for good reasons you said it yourself in your own words no taures is gonna withstand torture like Glocks do and they still fire yes tuares did get better by copying Glock like other gun manufacturers.
@Flaco817 Glock has been around longer then the current Taurus company. But that gun is better than a Glock 26 by far hands down. And Taurus is used buy police and military all over the world. Spain Brazil Saudi Arabia are just some of the countries that use Taurus. Taurus started off as a small Gun Company making crappy revolvers. But now they make high-grade weapons for militaries all over the world. They even make rockets and Rocket guidance systems. They make a machine gun and rifles we just can't get them here. The problem is that Glock Fanboys like yourself can't fathom anything other than a Glock. When it's literally the most outdated polymer frame Striker fire there is.. my Taurus has 6,850 rounds through it without a single malfunction. My 1100 Sig was malfunctioning straight out of the box I was getting jams it worked itself out but the Taurus has never jammed. My high-end 1911s wood jam from time to time but the Taurus never jams I have a nice Beretta and once in awhile I'll get them malfunctioned. But the Taurus keeps running. Don't worry you can still masturbate with your Glock but there is better stuff out there
There are some great upgrades for the g3c
In time of need, brands don't mean anything if you don't masters what you strap.
true dat
I own two g3c and just recently bought a glock 19 so far the g3c has been real awesome firearm
You said just like the Glock a few times. Just pay the extra money and get the better gun. GLOCK!
I picked mine up for $215 in an online deal. It is a well-engineered but simple and trustworthy design...literally a Glock for half of the price. It's not my EDC, but after 300+ rounds and no misfires, I trust it with my life. Lastly, it shoots like hot butter on stiff toast. If you're on the fence, just buy one and thank us later.
No, so many G3c’s will not feed most hollow points. Glocks (which I’m not a fan of) will at least work out of the box.
I've fed all kinds of ammo through my G3C and it hasn't had any problems. I was concerned about reports that it had trouble cycling hollow-points, so the first thing I did was take it straight to the range right after buying it (did not clean it, did not lubricate it) and fired a couple mags of HP through it (two different brands), and it had no trouble at all.
Mine liked hydro shocks. It did jam on sierra outdoor extreme hollows.
All you need to do to make your Glock better is a handle it grip and a red permanent marker to color in the white dot on the front sight honestly it really helps and I call it my hillbilly Red Dot😂😂 hollows over balls 24/7 funny you talk about glocks no manual safety. My first gun( even though i was a glock hater) was a glock 43. Next to the m&p it fit my hand the best. I was nervous to carry one in the chamber appendix. So the first day i carried a empty gun. Just to see if i would even like it. The next day i loaded the mag carried it. Then the 3rd day i put one in the chamber and proceeded to drop it because glocks stippling sucks.(handle it grips are amazing) but it didn't go off so i stuck it in my holster jumped up and down like a fool. That satisfied me enough that the jewels would be safe!!!
I may try that. I have been told: I'm being very unfair to Glocks - so I might break down and get one to give it a try.
@DaGunGuy yeah I kind of wish, I would have used an orange permanent marker after I did it, but the red worked really well. Also, with the handle it grips, they have the skateboard grip sandpaper like tape. and then they have a softer cushiony grip cover as well, but I trust sandpaper more than cushion grip, so I went with the sandpaper. Kind of want to try the other one as well.
Glocks are excellent firearms (a bit pricey though), but if your budget won’t allow you to get a Glock, the G3C is an excellent firearm, and there is absolutely nothing wrong with it. Having both, I shoot them both very well, and the G3C uses Glock sights, so you can replace them if you want.
Hey If I was on a budget I would continue saving up and buy that Glock LOL
@@josephpuchel6497 used glock.
I don't think anything will ever kill the glock line! I'm not a fan! But they work just have a awkward grip for my hand! But great pistols if you get used to it!
Same size as a glock 26, but with 100x better ergonomics and less recoil
Some people used to say you get what you pay for. Not a Glock fan boi, I do own a 43, in addition to a OG Hellcat and 365.
I like the HC, LOVE the 365 but really found the 43 a very jumpy little gun.
@@DaGunGuyAgreed, have the 365 on me as I head to work. All 100% reliable, all a bit flippy by nature.
Technically speaking you need about $115 in upgrade parts to make it a perfect a gun
Yes, a few upgrade parts make the G3c even better. The recoil guide/spring and striker guide upgrade parts for my G3c are stainless steel. I believe those original parts on a Glock are polymer and plastic (same as the original Taurus parts). All in, I'm very happy with the price and performance of the G3c.
I have the G3C and it's a pretty good pistol for the price. I wouldn't compare it to a Glock though.
Why? The trigger is better than a glock for less money😂
@@TxOutlawTanker All depends on who you ask.
It beats the glock at everything. 100x better ergonomics, less recoil, better sights, and for half the price..
I understand... some people judge guns with their wallet.
If u hate glock so much why are u comparing everything to glock🤔 that says a lot about Glock...also it's not optic ready is why it's so cheap no thanks
I own glocks and Taurus. Not a Glock killer but I love my Taurus. I also love my Glock more 😂
I dont understand why other brands want to kill glock
@@subarusti4839 Cos glock is king, the other brands need to give extra mags and just add extra cosmetics to their guns for people to consider them
They hate and people like the one posting the video for attention and views hate on Glocks there’s tons of people that take a cheap gun and compare or say it’s better never that u never see them comparing it with a Canik or sig sauer
The g3c was the first pistol I owned when I moved to a free state I was pretty broke wanted something I could defend family home right away. It’s a perfectly serviceable firearm. Fast forward a few years I carry the 43x. Much much better pistol. Again if the Taurus is all you can afford it’ll work but the fit and finish is laughable compared to the glock. Mine also was very picky with hollow points. I had to polish the feed ramp and chamber it helped but didn’t fix the issue. Love them or hate them glocks will fire just about everything every time. I also think the trigger on the 43x is much better it’s shorter and crisper it’s heavier but I think overall it’s a less vague trigger. Sights are preference I don’t mind the glock sights personally I know many people do. I’m not a fan boy i carry the 43x but I don’t really own a bunch of glocks there not my favorite or anything.
I'm not a fan of the 43xx but well articulated position!
Nice reasonable gun which i do have and my daughters carry, now I have other brands CZ love ruger been solid for me for over 25 years Glock A1 trust in them but you have to customize them to your liking the reliability is amazing far as looks the same chic just one bigger than the others G3 cool but Glock killer good for clicks if they don’t know anything I knew it was more about the price which you should have just said, now that GX4 carry is a game changer but we all like what we like I’m not into to downing other brands or anything others like because my guns are for me to like.
Just saw these comments. 10/25/24, my g3c won’t handle flat nose hollow pts, only range ammo. Any thoughts
Any resolve to your problem or question? It's a common occurrence. Try x1 or x2 less rounds in the mag and see how it cycles. Polish the crap out of your feed ramp. Something about the full mag and tension make the first two rounds nose dive into the feed ramp. A
Taurus improved over Glock I have had Glocks.
I just got my G3c 3 days ago I love mine
I installed a keep tinkering trigger and all it did is improve my pt140, if you are a taurus fan in my opinion it makes a great gun even better.
My first gun I bought Taurus g3c I love it💯
Taurus continues to improve greatly. The G3 and G3c are simply amazing imo. The G4 may be closer to a Glock “killer”, but I prefer the G3 line… it is very fairly priced, offers a manual safety and the double strike capability is first class. Those features are why I have not considered the G4. Just my preference. Glock still rules though. Variety and almost unlimited upgrades.
I highly prize my Glock and have done a lot to it over the years. I also highly prize my M&P with all of its accessories and extra features. But I will always love my humble little Taurus G3c for simply being a creat gun that I was able to pick up for just $220. It sits amongst kings. I don’t waste my money on garbage.
Maybe I shouldn’t have sold mine 😅 I replaced it with a TX22 compact so my dad could go shooting with me. I’ll probably get a GX4 carry next 😁
I sold my 26 and bought two G2C’s
I m Glock fan .. but the G2C was better and now my G3X is better again
Should be another mag inside the white part of the box. They come with 3 mags.
Yeah, it's so wonderful that after a couple hundred rounds, I got rid of it as fast as I could! All this glowing feedback sounds like paid promotion to me.
Yeah, that must be it... It's not that Taurus makes good guns, it's that EVERYBODY WHO OWNS ONE is getting paid by Taurus to say nice things about them! 😂
Individuals opinion I love my Glocks !
Pick one of these up they're under 300 bucks and I guarantee you you'll like it.. I like it better than the Glock 26 by far. I do like the Glock 48, . But I'll still pick the Taurus
I wouldn’t call it the Glock killer but I got my g3c for a good price. It is probably one of the best affordable pistols for a couple hundred bucks. Even if you own HKs, Glocks, and other high end guns, it’s hard to overlook the g3c.
From a functionality standpoint I'd agree that the G3C is just as good as a Glock. I'm not a Glock fanboi, I'm a Sig fanboi. BUTT, and this is a biiig hairy butt, Glock finishes are better than what Taurus uses. The metallurgy is probably better, The polymer quality is probably better. I have three Taurus hanguns. A TCP, GX4, and a 856UL. I recently sold my 692 to buy a P239. I've owned a G2C and a G3C and liked them both, sold/traded them for things I wanted more. If someone offered a 357Sig barrel for the G3C (hint, hint, Lakeline), I would dither around about selling one of my guns to get one.
The only thing that Glock has over the Taurus is , aftermarket support
Awesome video
Thank you!
Carry my g2c everyday
@@jdrussell8916 My G2c is in my rotation along with a Bersa TPR9C. I like the TPR9C the best and its my favorite sub compact. When I got the G2c, I got it as a backup to the TPR9C. But even sub compacts can be on the large size for summer carry in hot weather with light clothing so for summer carry I go with the SIG P365 micro compact. All three of these pistols are accurate and still flawless past 600 rounds. BTW, I don't own a Glock but then again I won't own any striker fired pistol without a manual safety.
@dexternorman6283 Yes good video.
Literally just picked up the Bersa so we could review it. The video will be coming up soon. How to you like it compared to the Taurus?
I like my Glocks but I do carry a G2C Taurus with sleeves on sig 17rd. Mags it's lighter than my Glocks.
I’ve owned a few Taurus and a few Glocks.
Yes the Taurus does have better ergos and it’s cheaper. They are good guns for the money. Are they a Glock killer?, absolutely not.
Glock is a more heavy duty ready for war gun. They use a thicker steel and has a more premium feel. Taurus are great lil guns too tho, but just remember, there are reasons that it’s cheaper. Cheaper metals, parts etc. it’s just facts. They both are really good guns, but comparing a Taurus to a Glock is unfair in my opinion. 2 different classes of firearms. Buy once, cry once. Live by it baby!!! 😂
How much did they pay you?
I own numerous pistols (24), none jams more than my G3c
Mine only came with 2 magazines as well. I was told that it comes with 3
You put Taurus an absolute crap company in the same sentence as the most relied upon sidearm in history. Apparently you need more firearms experience mate
Did I mention Colt in the video?
@@DaGunGuy Haha.... Yeah, 42 years encompasses ALL of "sidearm history".
Your problem is when you shoot your left hand grip loosen your fingers so you pull mostly to the left...
I own a G3C AND I really don't think Glock's are all that great. However, I also know Taurus is NOT better than Glock. People that say otherwise are delusional...
Taurus is an OK gun but will never kill glock, glock has something over taurus anyday and that is Reliability, my friend owns a G3C and it doesn't like hollow points, FMJs are ok, but once you go to selfdefense, get ready to practice malfunctions...
Your sample size of ONE is soooooo compelling. Absolutely NOBODY has suffered chronic jamming with a Glock 🤣
@Luthiart actually sample size were 3 they are just picky with ammo bro, that's why you can get them sub 200 guns... they are hot trash... the revolvers are good to go, not the pistols
P226 18 round mag clicks into place and drops free when released have not fired yet