It’s good to see someone actually do all the old school tricks and little extras that us builders and fabricators across auto and moto do in one video. Kudos to you guys.
This video helped a ton! Did this conversion on my 2016 Dyna Streetbob, can finally put my bags on now! I'd recommend folks what this video first, there was a redo or too in the video, so watch it through, note when he had to undo a butt connector or two, so you dont' have to redo it too. ;)
I’m really glad I came across this video. I have the same set up on my FXDB but when I bought it, the seller said the wires got rubbed by the tire. Only the right sides working, I’ll have to look into bringing it in. Sick video 🤘🏽
So I followed the video (I’m a fabricator not an electrician) lol can someone tell me why that little red light on the Speedo came on and won’t go off? It’s a 2013 dyna fxdb. Everything seems to be working like it should but I noticed the blinker indicators on the dash are blinking faster than the blinkers are and that red light is on. Any help would be appreciated! And thank you to the guys at IMZZ for putting out a super thorough video!! I’m a tig welder/fabricator and build bikes every day but I can’t wire shit to save my life lol this video helped a fuck ton
Sounds like you might need a load equalizer for the fast blinking. The red key light on the dash is maybe because the light has been changed to led and the computer doesn't register it. You need to check what code it is related to.
Quick question. What was the purpose of cutting the taillights so short if you planned to cut the wires again @26:30? I wish I would have seen this prior to making my cuts the same haha
Guess I missed that part haha. I just want to say thank you for this video. Followed this step by step and completed my first electrical job on my Dyna. Any tips on how to reset the computer? Every connection was done correctly. First test ran great but then it started acting up i.e hazards not turning off or the blinker lights were stuck on.
It’s good to see someone actually do all the old school tricks and little extras that us builders and fabricators across auto and moto do in one video. Kudos to you guys.
Thanks Mike!
This video helped a ton! Did this conversion on my 2016 Dyna Streetbob, can finally put my bags on now! I'd recommend folks what this video first, there was a redo or too in the video, so watch it through, note when he had to undo a butt connector or two, so you dont' have to redo it too. ;)
I’m really glad I came across this video. I have the same set up on my FXDB but when I bought it, the seller said the wires got rubbed by the tire. Only the right sides working, I’ll have to look into bringing it in. Sick video 🤘🏽
2021 883s have cable routing already in them. I'm doing this. Thanks for the excellent video man!
Dude love the vids. Please crank out more!
Thanks Joshua!
GENIUS INSTALL THANX BROTHER / Ride Safe💪🏻💨🚀‼
Outstanding
So I followed the video (I’m a fabricator not an electrician) lol can someone tell me why that little red light on the Speedo came on and won’t go off? It’s a 2013 dyna fxdb. Everything seems to be working like it should but I noticed the blinker indicators on the dash are blinking faster than the blinkers are and that red light is on. Any help would be appreciated! And thank you to the guys at IMZZ for putting out a super thorough video!! I’m a tig welder/fabricator and build bikes every day but I can’t wire shit to save my life lol this video helped a fuck ton
Sounds like you might need a load equalizer for the fast blinking. The red key light on the dash is maybe because the light has been changed to led and the computer doesn't register it. You need to check what code it is related to.
Very good
I need license plate RG ST 2022
Quick question. What was the purpose of cutting the taillights so short if you planned to cut the wires again @26:30? I wish I would have seen this prior to making my cuts the same haha
Hey, we cut them again so they are staggered. He explained that about a minute after.
Guess I missed that part haha. I just want to say thank you for this video. Followed this step by step and completed my first electrical job on my Dyna.
Any tips on how to reset the computer? Every connection was done correctly. First test ran great but then it started acting up i.e hazards not turning off or the blinker lights were stuck on.
Do these plate frames come built the exact same? Like I just received one, is the brown on mine going to be the right blinker as it was for you?
Yes, they are all identical!
Should’ve used a shrink on top of all the wires
How good does this work at night?
Your amber lights are turning on with your brake lights when you brake, how can you just leave the amber lights to turn on with the signals only?
Custom Dynamics tells you how, they have several wiring diagrams in the instructions to show you how to do multiple different options.
How did you remove the pin out of that plug?
We plan on making a new video to show how to de-pin all the Harley plugs including this one. Stay tuned...
The video on how to de pin the plugs is up now
Here you go...th-cam.com/video/zArs-Td7Emo/w-d-xo.html
I need that
What size license plate does it take? Just brought one for my low ride st and can't find plate size anywhere
Standard US plate size...
@@imzzelitevehicleconcepts9267 which is? Im from UK
Oh sorry! 7 x 4
@@DUSTY88 did you fit it? Was it any good. Fancy one for my St. Bob
@coco 123 size was correct, used a flexi plate, no issues at all :)
NOOOOOOO not crush crimps!
hahaha this is an employees bike and we were kind of in a rush to get to Born Free. It has since been done a little more proper!