omg i’m dealing with this problem at this exact moment (2010 camry) THANK YOU SO MUCH! my car ALWAYS sounds like that clicking but has been louder with p012 code. my VVT had plastic parts stuck in it for some reason clogging it? sprayed it out but it gets clogged every now and then so there’s still plastic in there i’m just going to replace the solenoid. thank you guys so much!! timing couldn’t be any bit better
An OCV solenoid failed on my 2016 2grfe. Oil level was full and I change it myself every 5,000 miles with quality oil. The oil in the engine at that time only had 800 miles on it. Engine doesn't burn oil. Solenoid was clean as a whistle. In my case, my solenoid simply failed. Bought a new one and the car is back to normal.
Thank you for this info! My ‘06 Honda Element went into “limp mode” yesterday after I accelerated getting on the highway 😱 I was panicked. Was able to get over to the shoulder and after recovering from shaking, called AAA. Got towed to my mechanic who did the error check. Sure enough, it was the VVT Solenoid. Even tho I was 1K from needing an oil chg, he said my oil was on the low side. He explained what happens with low oil and the VVT. Of course it sounded like Greek 😂. I left my car with him and Googled VVT Solenoid. Watching this video explaining how it all works - Okay I get it now! 💡
Just to inform everyone. Even if that part does click when you put power to it, it does not mean its any good. I found that out on my honda. Was having a gas cap light. I changed the vent solenoid. Tested the old part it did click but didn't turn off the light. The new part worked immediately.
Our car can’t get past 4000rpm while driving but parked it revs all the way no problem. Could the vvt solenoid be bad and is there greater oil pressure in the motor while under load from the transmission vs being parked Edit: it’s a Murano with CVT transmission
+@Wicced2700 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Sorry, but oil burning in an engine gives a bluish smoke. Black smoke is a rich mixture... it used to happen a lot on the old cars pre catalytic convertors.
Thumbs down on this one. Love your videos 1A Auto! But when I see one like this with the instructor shown speaking on a side view, it's just weird! What's the purpose of it? It's not that he is not cool but it's not about him otherwise I'd be watching on the facebook where all the cool people are. LoL
+Laverne We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Great video. Should also mention vvt filter cleaning. Both go together.
omg i’m dealing with this problem at this exact moment (2010 camry) THANK YOU SO MUCH! my car ALWAYS sounds like that clicking but has been louder with p012 code. my VVT had plastic parts stuck in it for some reason clogging it? sprayed it out but it gets clogged every now and then so there’s still plastic in there i’m just going to replace the solenoid. thank you guys so much!! timing couldn’t be any bit better
Great vid dude, love you guys at A1 Auto you always explain things in great detail .👍
Great information presented professionally
Lots of good information, very helpful 👍
Excellent video presentation.....
An OCV solenoid failed on my 2016 2grfe. Oil level was full and I change it myself every 5,000 miles with quality oil. The oil in the engine at that time only had 800 miles on it. Engine doesn't burn oil. Solenoid was clean as a whistle. In my case, my solenoid simply failed. Bought a new one and the car is back to normal.
I just did mines. mines was dirty oil. Thanks to 1auto videos was simple.
+Cesar Sandoval Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent video! Thanks for helping me teach my dad about the VVT solenoids!
Thank you for this info! My ‘06 Honda Element went into “limp mode” yesterday after I accelerated getting on the highway 😱 I was panicked. Was able to get over to the shoulder and after recovering from shaking, called AAA. Got towed to my mechanic who did the error check. Sure enough, it was the VVT Solenoid. Even tho I was 1K from needing an oil chg, he said my oil was on the low side. He explained what happens with low oil and the VVT. Of course it sounded like Greek 😂. I left my car with him and Googled VVT Solenoid. Watching this video explaining how it all works - Okay I get it now! 💡
+@samidluxe Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I love the video thank you..
Very nice information boss...
Just to inform everyone. Even if that part does click when you put power to it, it does not mean its any good. I found that out on my honda. Was having a gas cap light. I changed the vent solenoid. Tested the old part it did click but didn't turn off the light. The new part worked immediately.
I replaced both vvt solonoids on my Hyundai Elantra still having same problem what else do I check
What about the ticking noise what caused the solenoid to make the ticking noise did the noise went away after putting the new solenoid?
Just solved this with my 2007 g35, code p0021 ! Replaced the vvt solenoid and now it’s all hunky dory!
How may oil control valves are in a 2018 Subaru Impreza? I'm on the 3rd valve change in 8 months!?!?
Thumbs up. Does the Tcc solenoid circuit make it go into limp mode?
Our car can’t get past 4000rpm while driving but parked it revs all the way no problem. Could the vvt solenoid be bad and is there greater oil pressure in the motor while under load from the transmission vs being parked
Edit: it’s a Murano with CVT transmission
FIRE VIDEO 🔥🔥🔥🔥🔥🔥
i would HIGHLY recommend uploading all of your videos to rumble,brandnewtube,brighteon,andbitchute they’re missing how to content there.
Does a 1995 Chevy Tahoe 4x4 have them
What's limp mode
I wish i'd have seen this video 8 years ago when working on a Camry
Can it cause P0300 P0301 through p0308. 2006 lexus gs430 i can only start the car by pumping the gas and misfire on all cylinders while running
+@Wicced2700 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Hello.
Thanks for all explaner.
I have one question, please answer.
Where position crank sensor ford focus mk 1,,2.0,,ztic?
Thank you again.
It should be at the lower part of the engine, where the crank shaft would be.
I wonder if the Toyota rva4 2010 got a fuel filter
In line fuel filter
Sorry, but oil burning in an engine gives a bluish smoke. Black smoke is a rich mixture... it used to happen a lot on the old cars pre catalytic convertors.
Thumbs down on this one. Love your videos 1A Auto! But when I see one like this with the instructor shown speaking on a side view, it's just weird! What's the purpose of it? It's not that he is not cool but it's not about him otherwise I'd be watching on the facebook where all the cool people are. LoL
I like how they give amazing information but they need to stop with this horrible acting. Kinda makes me not trust them. Just be real.
I replaced both vvt solonoid on my Hyundai Elantra still having same problem stalling condition.What else could problem be
+Laverne We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c