Hi Alex, after watching many videos here and elsewhere I decided the prime-cut 50 which I purchased already was not the machine I needed. I called Gene at Prime weld and he offered to trade my prime-cut 50 (FULL REFUND) for a Prime-cut 60, I couldn't believe it... and he paid shipping both ways. I have always favored Lincoln welders now when I purchase any other type of welders it will be prime weld all the way EXELENT customer support.
I bought a prime weld 180 mig a couple months ago, and I absolutely love it!! I can't wait to get a plasma cutter next!! I got my supplies from Fowlers in Windsor CT, great service!!
OMG. I'm so mad at you... because of your excellent videos, I'm getting the Cut-60, TIG225, and the MIG180. I curse you!!! Just kidding of course. I have watched all your videos several times. It was the up to the Primeweld line and the YesWelder line, but because of you, Primeweld won! I know the time it takes to make these videos, but thousands of us appreciate it. Just want you to know that
great video...right to the point, no bs, no “um’s” or “ah’s”....sorry to hear you were laid off, but now you have time to concentrate on your own business. Best wishes and thanks for the informative review (I’m sold 👍👍)
Sorry to hear about your end comment that you got laid off your job when this video was made. Keep up the content. You have the skills to get wherever you want. Hope the few months since then positive things have come along.
Well, I was just kinda thinking about upgrading my plasma cutter but I made the mistake of watching another one of your reviews. Dammit, I already bought the mig 180 because of you!!
Hey buddy great job. Just to let you know...I got messed out of co ownership of a multi-million dollar company where I would weld and fabricate gates. I'm starting a channel soon about starting a company from nothing and turning it into something starting off by using primeweld machines. I've already planned on mentioning/recommending viewers to watch your videos... If that's ok? I feel you deserve more views than what you have and I pray you do very well on your new full time job.
Mine is having issues where i pull the trigger and nothing.. worked great until recently. Figure ill try customer support tomorrow, they were super helpful last time and swapped out my bad unit.. i have the mig and tig welders from them as well and they are excellent machines too
Did your swirl ring fall out when you change the consumables the last time that's the most common symptom of that if not call customer support and they will definitely get you taken care of 😎
@@amcustomfab actually i just got done tearing it apart, noticed one of the spring pins was way back that consumables press against! Fixed the pin and back to normal! Figured it had to be the torch after i jumpered pin 1&2 in the back and it fired. Thanks for the help!
Awesome video on your primeweld cut 60 video. question the link you have for your drag tip consumables is that the only two places you need to make it work for the drag tip or do you need other components besides to make it work. Or is it the only two pieces you need to make it work from the description you posted for the drag tip thank you God bless
Looks like it does but wanted to check.. is the connection to the torch allow it to swivel and is loose wobbles at a 360? I just received my cut 60 and trying to determine f that's normal or a problem. Thanks in advance
Any chance of some long term updates to this setup? I'm looking at the exact setup you have outlined here. Prime weld has worked great for me with my 225X and was looking to pair it with the Crossfire Pro.
Hi Adam, You answered a question I had before and I really appreciate your help. I have the Cut60 on a Crossfire Pro and I was wondering what your settings were for cutting 5/16" steel? Thanks!
I would run whatever the book settings are on the cut 60 they're pretty spot on if you don't still have the manual you can look up on the primeweld website
@@amcustomfab I have the manual, but I was doing work from home and the Primeweld website actually does not have the manual lol. But I did follow their parameters and the cut was not great. I ended up changing the electrode, decreasing IPM to 30, and increasing air by 10 PSI. The cut wasn't perfect but it helped. Thanks!
I love my Primeweld cutter 60 Primeweld is doing a great job in everything for me have the 225 and waiting for the new mig to come out... !! Head good things in the making like 220 mig ?
I have the new mig right now and I am testing and reviewing it . I will post the review video as soon as they lonch on the website . It is a 200 amp machine with a digital interface 🙂 in the same body as the mig 180 .and with Lost more features.
@@amcustomfab I had to return the BestArc cutter I had (air leak inside) but FYI, I made up a hose with 2, count 'm, 2 dryers in line, just for cutter use. The ones I use have a dump valve for getting rid of the water they catch. Might be using them with my, uh, Primeweld cutter after watching this review.
great video........ I bought the machine today from Chile through Amazon, according to what I read in the manual on the manufacturer's page, it is 110/220 volt one phase.........could you tell me how do you connect it? Thank you
has anyone tried these consumables ? I heard a comment that the threads of this machine are different than the standard IPT-60 threads ? also the consumables in the link are only rated up to 40 amps? anyone have other experiences ?
"DUEL" is a contest with deadly weapons arranged between two people in order to settle a point of honor. "twice he had seriously wounded men in duels" You probably meant DUAL, as in two.
My late mom the English pedagogue would completely freak out at the horrendous spelling and grammar found in YT comments. Yikes! is all I can say. Siri makes it hard with "her" crazy pigeon droppings , but folks, we could do a little proofreading.
What is your opinion on the razor weld 45, is it a good quality tool. And if you had to pick just one the razor weld or the prime weld for your crossfire which one would you pick ? Thanks in advance
Working on a video with the prime weld on the crossfire now. The razor weld has a factory defect that makes it so sometimes it does not fire consistently that has been an issue in the past the only thing different with the prime weld that I found so far is that it does not fire as soon as it is initiated it has like a half a second delay so you just have to account for that in your pure delay settings besides that the prime world has been really good so far really good so far I think any end I would recommend the prime weld for two reasons one it has never misfired on me yet and two their customer service is spectacular so if you ever did have a problem they would take care of you
For the most part yes it depends on what type of CNC you have if you just have an x and a y-axis all you have to do is wire the signal wire there's a little more wiring if you have a torch height controller. But it does come with the port already installed in the back so you do not have to disassemble the machine which is very nice
Depends on how long a sustained cuts you're doing. I run mine off of a little oilless 30 gallon that does about 5 and 1/2 CHF at 90. But if I'm cutting for more than 10 minutes straight, I have to pause it and let the compressor keep up
@@amcustomfab Thanks, found it. I'm considering getting the primeweld cut 60 plasma cutter to cut open compressors for copper. Would it work for that? What size air compressor do you recommend?
It is kind of an unfortunate name, all the cheap ebay plasma cutters are 'Cut-50' How would this work with a cnc, would it drag the stand-off all over the piece does it have a pilot arc?
I run this on my Langmuir, just remove the stand off bracket and mount the torch, works perfectly. The tip never touches the cut steel on CNC. The original Langmuir table uses 1/16” and 1/8” shims to set tip distance to workpiece.
Hi Alex, after watching many videos here and elsewhere I decided the prime-cut 50 which I purchased already was not the machine I needed. I called Gene at Prime weld and he offered to trade my prime-cut 50 (FULL REFUND) for a Prime-cut 60, I couldn't believe it... and he paid shipping both ways. I have always favored Lincoln welders now when I purchase any other type of welders it will be prime weld all the way EXELENT customer support.
I bought a prime weld 180 mig a couple months ago, and I absolutely love it!! I can't wait to get a plasma cutter next!!
I got my supplies from Fowlers in Windsor CT, great service!!
OMG. I'm so mad at you... because of your excellent videos, I'm getting the Cut-60, TIG225, and the MIG180. I curse you!!! Just kidding of course. I have watched all your videos several times. It was the up to the Primeweld line and the YesWelder line, but because of you, Primeweld won! I know the time it takes to make these videos, but thousands of us appreciate it. Just want you to know that
Haha Same Here.
I’m pretty sure I’m sold on PrimeWeld.
I saw reviews for the Everlast Plasma and that’s how I ended up here.
Thanks guys.
I think his spouse wrote that.
great video...right to the point, no bs, no “um’s” or “ah’s”....sorry to hear you were laid off, but now you have time to concentrate on your own business. Best wishes and thanks for the informative review (I’m sold 👍👍)
Very good video. Please show us about connecting with your CNC. I'm very interesting how to join wire and setting mach 3.
Sorry to hear about your end comment that you got laid off your job when this video was made. Keep up the content. You have the skills to get wherever you want. Hope the few months since then positive things have come along.
🤔It seems like everybody testing this machines only test them with clean metal, what about galvanized steel? Or dirty steel? will it cut through❓
Great video. Having a torch with a drag tip available and that uses standard contacts and nozzles is a nice plus.
I learned some things and purchased a cut-50 d, I look forward to learning more about this machine here.
Thanks
Great video. Looking forward to see what you accomplish on your channel 👍🏼
Good clean presentation. One of the better products review vids.
Well, I was just kinda thinking about upgrading my plasma cutter but I made the mistake of watching another one of your reviews. Dammit, I already bought the mig 180 because of you!!
Lol 😂
Very informative video. Thanks also for the links of the consumables.
Great job, excellent presentation.
Hey buddy great job. Just to let you know...I got messed out of co ownership of a multi-million dollar company where I would weld and fabricate gates. I'm starting a channel soon about starting a company from nothing and turning it into something starting off by using primeweld machines. I've already planned on mentioning/recommending viewers to watch your videos... If that's ok? I feel you deserve more views than what you have and I pray you do very well on your new full time job.
Absolutely I appreciate it brother will be praying your channel succeeds as well.
@@amcustomfab thank you very very much!
Mine is having issues where i pull the trigger and nothing.. worked great until recently. Figure ill try customer support tomorrow, they were super helpful last time and swapped out my bad unit.. i have the mig and tig welders from them as well and they are excellent machines too
Did your swirl ring fall out when you change the consumables the last time that's the most common symptom of that if not call customer support and they will definitely get you taken care of 😎
@@amcustomfab actually i just got done tearing it apart, noticed one of the spring pins was way back that consumables press against! Fixed the pin and back to normal! Figured it had to be the torch after i jumpered pin 1&2 in the back and it fired. Thanks for the help!
Check you're air pressure! I've have had this issue. If you're air-pressure drops too low it will not arc.
Awesome video. You have me sold on this unit as in just ordered one.
Manual specs for 1Max and 1Eff and NEC 630 will inform.
Cool .. I like finding your videos ... you do great reviews and always for what I want to know about ..!!!🤘
Thanks 😎 If you hit that little bell 🔔 you won't have to find them you will get notifications 😉
According to Primeweld, they say this has a built-in air drier, didn't think to ask how to access to empty, any idea?
Awesome video on your primeweld cut 60 video. question the link you have for your drag tip consumables is that the only two places you need to make it work for the drag tip or do you need other components besides to make it work. Or is it the only two pieces you need to make it work from the description you posted for the drag tip thank you God bless
That should be it . Some people run a different contact tip with it but the factory style should also work with the drag sheald
Looks like it does but wanted to check.. is the connection to the torch allow it to swivel and is loose wobbles at a 360? I just received my cut 60 and trying to determine f that's normal or a problem. Thanks in advance
Any chance of some long term updates to this setup? I'm looking at the exact setup you have outlined here. Prime weld has worked great for me with my 225X and was looking to pair it with the Crossfire Pro.
Still running strong
Just Awesome
Hi Adam, You answered a question I had before and I really appreciate your help. I have the Cut60 on a Crossfire Pro and I was wondering what your settings were for cutting 5/16" steel? Thanks!
I would run whatever the book settings are on the cut 60 they're pretty spot on if you don't still have the manual you can look up on the primeweld website
@@amcustomfab I have the manual, but I was doing work from home and the Primeweld website actually does not have the manual lol. But I did follow their parameters and the cut was not great. I ended up changing the electrode, decreasing IPM to 30, and increasing air by 10 PSI. The cut wasn't perfect but it helped. Thanks!
Something that I found helps with thicker stuff also is upping your Pierce delay by a half a second
Solid Review. Thanks!
Plz make a video of u running it on your cnc table 👍👍👍👍👍👍👍🤟👌
In process of making that video now will probably be out in a couple weeks
My 220 line is 30 amp, will that work on this machine? Will rarely need to cut more than 3/8 " thick
I love my Primeweld cutter 60 Primeweld is doing a great job in everything for me have the 225 and waiting for the new mig to come out... !! Head good things in the making like 220 mig ?
I have the new mig right now and I am testing and reviewing it . I will post the review video as soon as they lonch on the website . It is a 200 amp machine with a digital interface 🙂 in the same body as the mig 180 .and with Lost more features.
Thanks gracias to explicate good 👍 I goo buying one
Are you able to find consumables locally or do you always have to order them as you need?
I honestly haven't looked locally I have always just bought on line.
Looking at buying this after watching your video. Do you have a code so you get credit? Also subbed to your channel!
I don't have a code for this I really appreciate the thought though 😎👍and thanks for the sub.!!!
Hello, I believe this machine comes with air filter built inside unit so you don’t have to add one on the outside greetings.
No such thing as too much air filtration when it comes to plasma cutting unless it restricts volume. 😎 Thanks for watching 🙏👊
@@amcustomfab I had to return the BestArc cutter I had (air leak inside) but FYI, I made up a hose with 2, count 'm, 2 dryers in line, just for cutter use. The ones I use have a dump valve for getting rid of the water they catch. Might be using them with my, uh, Primeweld cutter after watching this review.
great video........ I bought the machine today from Chile through Amazon, according to what I read in the manual on the manufacturer's page, it is 110/220 volt one phase.........could you tell me how do you connect it?
Thank you
I'm not an electrician I can't advise on that I'm sorry.
Brilliant video thank
Nice video.
has anyone tried these consumables ? I heard a comment that the threads of this machine are different than the standard IPT-60 threads ? also the consumables in the link are only rated up to 40 amps? anyone have other experiences ?
Pilot ark is the best way...
What is the amperage of the breaker on your 110V "standard wall outlet" circuit?
20
@@amcustomfab Great, thanks for the response.
Does it need a 15A or 20A outlet for 120v?
Factory recommends 30 but I was running it off of a 20
"DUEL" is a contest with deadly weapons arranged between two people in order to settle a point of honor. "twice he had seriously wounded men in duels"
You probably meant DUAL, as in two.
You would be correct thank you for pointing that out
My late mom the English pedagogue would completely freak out at the horrendous spelling and grammar found in YT comments. Yikes! is all I can say. Siri makes it hard with "her" crazy pigeon droppings , but folks, we could do a little proofreading.
Can you flux mig weld gasless. With this particular machine, along with plasma cutter
Not with this machine but they do have a machine that will flux core weld check out primewelds website
What Air dryer do you recommend??
amzn.to/3LqQYtL
Here's a link to what I recommend
What is your opinion on the razor weld 45, is it a good quality tool. And if you had to pick just one the razor weld or the prime weld for your crossfire which one would you pick ? Thanks in advance
Working on a video with the prime weld on the crossfire now. The razor weld has a factory defect that makes it so sometimes it does not fire consistently that has been an issue in the past the only thing different with the prime weld that I found so far is that it does not fire as soon as it is initiated it has like a half a second delay so you just have to account for that in your pure delay settings besides that the prime world has been really good so far really good so far I think any end I would recommend the prime weld for two reasons one it has never misfired on me yet and two their customer service is spectacular so if you ever did have a problem they would take care of you
@@amcustomfab is the prime weld plug and play with the cnc table? Thanks in advance.
For the most part yes it depends on what type of CNC you have if you just have an x and a y-axis all you have to do is wire the signal wire there's a little more wiring if you have a torch height controller. But it does come with the port already installed in the back so you do not have to disassemble the machine which is very nice
@@amcustomfab I plan to get the crossfire pro with thc. And thank you once again.
I have a pro coming next month so I will be doing a set up video with the prime weld on it
How does it stand against the Miller 7/8" thickness cut machines (2-3K$)?
Honestly have not tried that thick I've cut half inch with it on the CNC machine and it works great
Can you gouge with this machine?
Not really
How big I need a compressor to run this decent
Depends on how long a sustained cuts you're doing. I run mine off of a little oilless 30 gallon that does about 5 and 1/2 CHF at 90. But if I'm cutting for more than 10 minutes straight, I have to pause it and let the compressor keep up
But if you're just doing shortcuts you could run it off of pretty much anything
What torch would you recommend for this?
Factory one works pretty good
What gauge is the power cable, seems small for a 48 amp+/- load
See NEC section 630. I thought the same thing, but welders & plasma cutters get a bit of tolerance.
Have you use the primeweld cut60 with crossfire system?
Yes I have I haven't got a video out yet of it hoping to do that
@@amcustomfab Thanks
Can it cut stainless steel?
Yes
How well does it cut aluminum
Yes
Which drag tips are compatible?
Link should be in th discription
Or Google ITP 60 drag tips 😎
@@amcustomfab Thanks, found it. I'm considering getting the primeweld cut 60 plasma cutter to cut open compressors for copper. Would it work for that? What size air compressor do you recommend?
I run I off a 30 gallon 6chf compressor
@@amcustomfab Thanks! Great videos.
It is kind of an unfortunate name, all the cheap ebay plasma cutters are 'Cut-50'
How would this work with a cnc, would it drag the stand-off all over the piece does it have a pilot arc?
Will be hooking it up to a CNC machine in a couple of weeks and doing a full review on that as well.
This is a pilot arc machine. Swapping out the consumables for a drag tip will let you set it up for CNC.
I run this on my Langmuir, just remove the stand off bracket and mount the torch, works perfectly. The tip never touches the cut steel on CNC. The original Langmuir table uses 1/16” and 1/8” shims to set tip distance to workpiece.
at ~10:38 "T-2 T-4"... Here about the guy who had dyslexia so bad he tried to kill himself?...
He jumped behind a bus.
Haha 😃
I get rights and lefts mixed up.
What CFM air compressor is recommended for this cutter?
If I remember correctly it's 5.5 ch f at 90 PSI