I think it's a nice design and looks good. But $380 for a Chinese made production line knife. I don't think so. The prices are getting ridiculous . Sorry, but it's easy to rave about how great something is when you didn't come out of pocket for it.
No offense, Beez, but I agree $380 for a Chinese made knife…ahhh NO!…Give me my Cold Steel SR1 Lite (Tanto or Clip) and I can buy two of each for that price and they are nearly indestructible!
Y’all are blinded by “USA pride” and I respect it, but Chinese oems are fantastic. Not all of them, but your remettes, kunwus, reates, etc offer more value than is possible in the US. I challenge yall to open your kinds and just enjoy KNIVES
I've had my Magnum for several years! 8:07 fit's in my closed fist can open easily with a light press of my thumb! Stays sharp time after time! Full automatic and a lot less cost!!
I don’t know who the designer of this knife is but this is one well thought out knife. The lines are great and flow perfectly between the scales and the blade. It’s hard to spend the kind of money this knife costs in this economy but this one is really worth it. They really seem to have nailed everything from aesthetics to functionality. I’m sold.
Definitely a very awesome looking knife for sure. Love the clean design and construction. The blade is simple, beautiful and flows well with the handle. I have to agree with the other comments, $380 is a bit much for a Chinese production run knife. They did do a fine job though.
It should be noted that when you take off the back section, the blade is exposed to your fingers when working on pivot, etc. Just be careful as you could slice your finger open. This is a very streamline cool looking design and I love the ingenuity. Feels different than the rest. Love the constant innovation.
Since I have more money than I know what to do with, I purchased 10 of each model to give to my biggest new client prospects as deal makers. Each and every one of them are now my clients. Now i am about purchase 10 more of each! They are worth every penny!
Magnifique couteau, travail soigné, une finition parfaite, pas de visserie apparente. C'est du magnifique travail même si c'est chinois !! N'en déplaise à d'autres personnes !! Après je ne mettrais pas autant d'argent dans un couteau que j'utilise tous les jours mais pour un collectionneur c'est intéressant 👍
Remette is innovating all day and night. Good thing it's got the WE fit and finish because they are asking WE pricing. There is no doubt that these will sell.
It depends on what state you are in... but the states that have the "stand your ground law" don't require you to retreat. He told the guy to get away from him first and he kept coming so the guy now can consider him to be a threat and stand his ground and pepper spray the guy for not stopping chasing after him...
Certainly looks really nice, but I won't pay that much for a knife that is made in china. I'd also prefer k390 over m390, especially if a dlc coating is involved. Would be interesting to put that blade on a hardness tester. For that kind of money the heat treatment had better be flawless, regardless of where it was made.
I have the sub $300 ZT 0462 and is very smooth but if you want ABSOLUTE hydrolic action try the Beyond EDC NIGHTHORSE. The $29 version which I have, 14c28n G10 or the premium S35 titanium $150 which SMKW still has, the budget version is sold out and probably discontinued but still have the premium, NOTHING BEATS them, the budget version is the ABSOLUTE BANG FOR YOUR buck knife. It's sad they're discontinuing them. Get it before it's gone.
The sharpness of a blade is determined by the geometry of the blade (thickness, grind, cutting edge, etc.) and by the structure of the steel; the finer the better. Melt steels are generally inferior to powder steels in terms of the fineness and distribution of the particles in the structure; larger carbides occur and this is more likely to lead to breakouts on a fine cutting edge, for example. There are melt steels that have a fine structure, such as Sandvic 14C28N, which was developed as blade steel, e.g. for razor blades. The edge retention depends on the blade geometry, as well as the steel and the hardening. Super steels have high proportions of components such as vanadium, which form very hard carbides that enormously increase wear resistance and thus also edge retention. No carbon steel can hold a candle to a good chrome steel or tool steel, let alone super steels.
Man! You were making me very nervous when you had the back off of the knife. I saw that edge, and your fingers were all around it. 😬 Good review Beez. Thanks
It's a great looking knife. It reminds me of how you remove the top cover off of an ak-47. It's nice but out of my price range unfortunately 😔I Like REMETTE but I hope they don't start overpricing themselves out of the market. Most people can't afford 300-400 knives. Thanks for sharing Beez. Have a great week 😊
Intersting video. We learned how to flip a knife open a couple dozen times but didn't learn anything that pertained to the quality of the blade, cutting efficiency, blade material, holding an edge, etc, Nice looking but nothing of real value for someone to consider purchasing.
Its a very nice knife and the no hardware look is cool. $350 for the non coated? Meh. $50 more can get an integral, made by a more reputable Chinese company, designed by by a popular YT knife guy. Id much rather pay the extra 50 personally. Shoot I've been seeing the MT anax going for around 400 a few times. Just my opinion.
If remette is kicking so much ass, tell them to fix the slightly crooked remette lettering on their knife pouches. Just looks kind of janky! I paid 200 bucks for a remette, the least they could do is take the time to center and straighten their branding. I thought it was just mine but I saw more crooked lettering on metal complex reviews and now Beez Blades! Sorry, just a tiny annoying nit pick!😂
There is no way this knife is worth this much excitement. The design doesnt do it for me. I like old school looking stuff. This stuff all looks like it belongs in movie Judge Dredd.
A Chinese company producing knives in China. I hate that my phone is produced in China but at least most of my dollars go to an American company that has freedom of speech and basic human rights.
Are they hiring influencers & TikTokers to design knives now!? This looks like a cheap Chinese gas station knife, but in order to properly service it you've got to figure out some impossible puzzle! Decent $40 beater blade, but only if it comes with a lifetime warranty & was domestically produced...🤙
For the cost, I want a knife that will save my butt in all situations...in the city and in the woods. This knife does not inspire that level of confidence. There are tool knives and there are art knives. To me, this is an art knife. I have seen some gentlemens knives that would likely make a better tool than this, while still having some degree of style.
Knife collectors have some serious life balance issues and need to spend their time, money, and energy on something which is beneficial to their emotional and personality growth.
Would you look at that thing? Would you just look at it? Just look at it. It's sitting right there in you're hands looking at you while I just look at it. Ohhhhhh. Ooooooooh ohhhh it's so beautiful would you just look at it shimmering off of the light would you look at that? Ooooooooh ooh oh ohhhhhhh would you just look at it? Somebody told me there is much prettier and I said pshhht would you just look at that? 😂😂😂
If you can’t use a knife day to day what’s the point!!! Collections are one thing but unless you are wealthy forget it The cost of knives will not feed your family 😏
REMETTE KNIFE RT-WK1 5% Code BEEZWK1 shrsl.com/4nv1x
NEW WALMART EXCLUSIVE KNIVES bit.ly/3X8IhsX
BLADE HQ New Arrivals shrsl.com/458r8
BLADE HQ Coming Soon shrsl.com/458rd
New Kizer Knives (A good pocket knife brand) shrsl.com/4nv0x
Kizer Deckhand Only on Amazon amzn.to/4e5mOHX
* Discount Codes, Knives In Recent Videos, Sharpening, EDC Gear & More Below.
NEW KIZER KNIVES on Amazon amzn.to/4e8d53L
KNIVES ON AMAZON IV'E REVIEWED www.amazon.com/shop/beezblades
QSP Penguin shrsl.com/4lbvj
QSP Penguin on Amazon amzn.to/3XLtYMS
CIVIVI Elementum II 15% off code Bee15 shrsl.com/4ks8y
Kizer Militaw at BladeHQ shrsl.com/4mdom
CJRB PYRITE shrsl.com/4lbvn
SWISS TECH KNIVES & GEAR bit.ly/3Wz5yFj
VOSTEED RACCOON amzn.to/3LAq6a4
TENABLE KNIVES on KANSEPT SITE 10% Code Beez10 shrsl.com/4lbb1
KANSEPT KNIVES 10% Code Beez10 shrsl.com/458q7
OLIGHT 10% Code BEEZ10 Flashlights/Gear www.olightstore.com/s/X6GFON
REMETTE KNIVES! shrsl.com/4jan7
WE KNIVES 15% Off Code Bee15 and Free Shipping shrsl.com/4gdpw
CIVIVI KNIVES 15% OFF code Bee15 (Free shipping) shrsl.com/4gdpw
BLADEBINGE SHOP 10% Code BEEZ10 shrsl.com/4g60z
REFYNE PENS 10% CODE Beez10 refyne.com/?rfsn=7584942.335e4c
EKSTER WALLETS/CARDHOLDERS (Code BEEZ FOR DISCOUNT) partner.ekster.com/BeezBlades
SMOKY MOUNTAIN KNIFE WORKS - bit.ly/3YVnkSw
Spyderco Knives shrsl.com/4eode
GP KNIVES shrsl.com/3vol1
NEW KIZER KNIVES bit.ly/45W5SQd
VOSTEED KNIVES shrsl.com/44519
WUBEN FLASHLIGHTS 10% Code BEEZBLADES bit.ly/3EgQlPj
CJRB KNIVES (FREE Shipping) shrsl.com/40yd2
URBAN EDC SUPPLY - bit.ly/370mDAV
ROARING FIRE GEAR POUCHES/BACKPAKS/KNIFE ROLLS 10% Code Beez10
shrsl.com/3vol6
*Knife Maintenance
QSP Knife VAULT and QSP Unicorn bit.ly/3wM3IXt .
QSP Vault at BladeHQ shrsl.com/4jhx1
QSP Unicorn at BladeHQ shrsl.com/4jhx3
CRKT BIT DRIVER with bits amzn.to/3LeT6BN
CIVIVI Keychain Bit Driver amzn.to/40uTljK
BRASS BIT DRIVER shrsl.com/3vthp
Wiha Torx Bit Set amzn.to/3jOvXMb
Wiha ¼” Bit Stubby amzn.to/3dRuS2o
Doo Dads (Mirofiber Swabs) amzn.to/3kaTy94
Loctite Stick amzn.to/3AkCNl3
Loctite Threadlocker amzn.to/3OHDSHW
KPL Knife Pivot Lube amzn.to/3qQbrwn
KPL Knife Pivot Lube Combo pack amzn.to/2Uw03K0
KPL Bundle Kit - amzn.to/3qZ2Rvd
* KNIVES IN RECENT VIDEOS:
CIVIVI KNIVES AT WALMART bit.ly/4cMoCEY
SWISSTECH INSULATED TUMBLER & WATER BOTTLES AT WALMART bit.ly/3Xu1oz6
QSP Ripley Glyde, Kali, and Turtle Punk bit.ly/3wM3IXt
QSP Kali at BladeHQ shrsl.com/4nj1i
QSP Ripley Glyde at BladeHQ shrsl.com/4nj1k
QSP Turtle Punk at BladeHQ shrsl.com/4nj1l
QSP Knives on Amazon amzn.to/3AD1jQF
KANSEPT KNIVES MISTAKEN (10% Code Beez10 All Kansept Knives) shrsl.com/4n97z
SENCUT HYRAX on Amazon amzn.to/3Alpkvd
SENCUT HYRAX At BladeHQ shrsl.com/4n09a
REMETTE RT BEE 8% OFF Code BeezBlades shrsl.com/4mzog
REMETTE RT BEE On Amazon amzn.to/4fBGSmV
KANSEPT CASSOWARY 10% OFF CODE Beez10 shrsl.com/4mgm7
Hinterland on BladeHQ (free shipping) shrsl.com/4mgm4
Hinterland on Amazon amzn.to/4fnMl0t
WE KNIFE ATTOR and SWIFTFIN 15% Code Bee15 and free shipping shrsl.com/4m87f
CIVIVI INCINDIE 15% Code for all is Bee15 shrsl.com/4m6ed
VOSTEED Raccoon Cub (4 variants) amzn.to/3RPNCTV
VOSTEED HEDGEHOG Black Aluminum shrsl.com/4ks8v
QSP Penguin (70 versions) shrsl.com/4ks8t
CJRB Pyrite shrsl.com/4ks90
*KNIFE SHARPENING
Code BEEZBLADES5 For 5% off TSPROF Sharpeners + free shipping
TSPROF Pioneer KNIFE SHARPENER tsprof.us/products/tsprof-pioneer-sharpening-kit-erp?ref=0UEzPErk
TSPROF KADET PRO SHARPENER tsprof.us/?ref=0UEzPErk
TSPROF BLITZ PRO SHARPENER bit.ly/40HpvZm
TSPROF K03 PRO SHARPENER - bit.ly/3MMZTGQ
WORK SHARP SHARPENERS bit.ly/3NoHsJi
Sharpening Stone Holder - amzn.to/3ytig9C
ATOMA 140 DIAMOND STONE amzn.to/3H96IQ2
ATOMA 400 DIAMOND STONE amzn.to/3D8xR2C
ATOMA 600 DIAMOND STONE amzn.to/3Oam0Y9
ATOMA 1200 DIAMOND STONE amzn.to/3w7SdWi
Strops amzn.to/3lsuRFP
Spyderco Knife Roll Large - amzn.to/36gFKTk
As an Amazon affiliate, I profit from qualifying purchases
BEEZ Instagram - instagram.com/beezblades/
Patreon - www.patreon.com/BeezBlades
Beez Blades
3541 DAYTON XENIA RD.
Unit 341062
Dayton, OH. 45432
Email - beezblades@gmail.com
DISCLAIMER This channel's content is meant for educational purposes only, and encourages the proper/safe use, handling, and understanding of tools.
#beezblades #knifeunboxing #knifereview #knives #knife #pocketknife
Swiss knife
Looks like a $15 schrade with a gold thumb stud.
I think it's a nice design and looks good. But $380 for a Chinese made production line knife. I don't think so. The prices are getting ridiculous . Sorry, but it's easy to rave about how great something is when you didn't come out of pocket for it.
It's sad it's heading that way. I love high end chinese oems but not for $400+
No offense, Beez, but I agree $380 for a Chinese made knife…ahhh NO!…Give me my Cold Steel SR1 Lite (Tanto or Clip) and I can buy two of each for that price and they are nearly indestructible!
Y’all are blinded by “USA pride” and I respect it, but Chinese oems are fantastic. Not all of them, but your remettes, kunwus, reates, etc offer more value than is possible in the US. I challenge yall to open your kinds and just enjoy KNIVES
Racism and ignorance run rife through this community 🙄
I can buy a gun cheaper
Absolutely beautiful knife but $380? I don’t think so.
And no sharpening coil to
I’ve got more expensive Microtech OTF’s and Chavez knives. You get what you pay for.
and the ok steel they use.... maybe $120.
You're so excited at the end of the day the knife will end up in your drawer or on a shelf until next one. You guys really killed the market.
AMEN! So much cringe in one video!
More than I paid for my CZ P07. I'd rather carry that than one of these.
Just say you can’t afford a good gun or a good knife. I mean who tf carries anything that’s less than 600 gun wise.
I've had my Magnum for several years! 8:07 fit's in my closed fist can open easily with a light press of my thumb! Stays sharp time after time! Full automatic and a lot less cost!!
I don’t know who the designer of this knife is but this is one well thought out knife. The lines are great and flow perfectly between the scales and the blade. It’s hard to spend the kind of money this knife costs in this economy but this one is really worth it. They really seem to have nailed everything from aesthetics to functionality. I’m sold.
Except for non removable thumb studs so you can't sharpen it and none existent sharpening choil. Two big flaws.
Definitely a very awesome looking knife for sure. Love the clean design and construction. The blade is simple, beautiful and flows well with the handle. I have to agree with the other comments, $380 is a bit much for a Chinese production run knife. They did do a fine job though.
Wow! So much better looking design!
They're getting good at it now!
All that's needed is a deep hollow grind on the blade!
It should be noted that when you take off the back section, the blade is exposed to your fingers when working on pivot, etc. Just be careful as you could slice your finger open. This is a very streamline cool looking design and I love the ingenuity. Feels different than the rest. Love the constant innovation.
Since I have more money than I know what to do with, I purchased 10 of each model to give to my biggest new client prospects as deal makers. Each and every one of them are now my clients. Now i am about purchase 10 more of each! They are worth every penny!
$380 is a little steep but if it was a hollow grind I'd have a hard time not buying it!
Cheap Chinese over priced crap!
I’ll stick with my Buck 110, it’s never failed me in 48 years of every day carry!
Magnifique couteau, travail soigné, une finition parfaite, pas de visserie apparente. C'est du magnifique travail même si c'est chinois !! N'en déplaise à d'autres personnes !!
Après je ne mettrais pas autant d'argent dans un couteau que j'utilise tous les jours mais pour un collectionneur c'est intéressant 👍
Sandrin knifes are the most inovativ knifes....
Remette is innovating all day and night. Good thing it's got the WE fit and finish because they are asking WE pricing. There is no doubt that these will sell.
REMETTE is just kicking butt with the new designs.
It depends on what state you are in... but the states that have the "stand your ground law" don't require you to retreat. He told the guy to get away from him first and he kept coming so the guy now can consider him to be a threat and stand his ground and pepper spray the guy for not stopping chasing after him...
German law says "no"
Certainly looks really nice, but I won't pay that much for a knife that is made in china. I'd also prefer k390 over m390, especially if a dlc coating is involved.
Would be interesting to put that blade on a hardness tester. For that kind of money the heat treatment had better be flawless, regardless of where it was made.
For that kind of money, I'll stick with my Chris Reeve Large Sabenza.
Where you getting Sebenzas for $380?
@@BloodyRim That was a while back - like early 2000s. I'm sure that they've gone up a bit since.
I have the sub $300 ZT 0462 and is very smooth but if you want ABSOLUTE hydrolic action try the Beyond EDC NIGHTHORSE. The $29 version which I have, 14c28n G10 or the premium S35 titanium $150 which SMKW still has, the budget version is sold out and probably discontinued but still have the premium, NOTHING BEATS them, the budget version is the ABSOLUTE BANG FOR YOUR buck knife. It's sad they're discontinuing them. Get it before it's gone.
The best razor-sharp knife blades are made out of very high carbon steel and they hold an edge like nobody's business.
The sharpness of a blade is determined by the geometry of the blade (thickness, grind, cutting edge, etc.) and by the structure of the steel; the finer the better. Melt steels are generally inferior to powder steels in terms of the fineness and distribution of the particles in the structure; larger carbides occur and this is more likely to lead to breakouts on a fine cutting edge, for example. There are melt steels that have a fine structure, such as Sandvic 14C28N, which was developed as blade steel, e.g. for razor blades. The edge retention depends on the blade geometry, as well as the steel and the hardening. Super steels have high proportions of components such as vanadium, which form very hard carbides that enormously increase wear resistance and thus also edge retention. No carbon steel can hold a candle to a good chrome steel or tool steel, let alone super steels.
Get on with it ✝️🇺🇸😡
Needs a proper plunge grind
Yeah that's a deal breaker!
Man! You were making me very nervous when you had the back off of the knife. I saw that edge, and your fingers were all around it. 😬 Good review Beez. Thanks
That’s a beauty but wow, a pretty hefty price tag
It's a great looking knife. It reminds me of how you remove the top cover off of an ak-47. It's nice but out of my price range unfortunately 😔I Like REMETTE but I hope they don't start overpricing themselves out of the market. Most people can't afford 300-400 knives. Thanks for sharing Beez. Have a great week 😊
Amazing engineering….liner lock…
🤣👏 my favorite!
Pocket clip is on the wrong end so that's an instant hard no. Not to mention if that thing costs anything more than 3 digits, that's another hard no.
You must pass up most knives if they have to be tip down..
Maybe I missed it, who makes the Kingfisher & the Paraquin Falcon ??? Don't see them listed
Rike has done this on a few knives.
I can't believe it! It's sold out. I want one so badly
He sounds like a knife infomercial. Gonna make a prediction that there's a link to buy where he gets a kickback.
Great review. SOLD OUT. The design looks like a pistol slide.
My Laguiole of 15 years is still kicking in my pocket
Ill stick to a good ol crkt
It's a very nice fancy pants knife. You gotta like the screwless look and the way it comes apart. Thanks for showing. 👖😎👍
Didn't tear into the box wrapper!
Like MC did 😂
No way im buying a $360 knive made in china, only USA or Japanese for that price.
Intersting video. We learned how to flip a knife open a couple dozen times but didn't learn anything that pertained to the quality of the blade, cutting efficiency, blade material, holding an edge, etc, Nice looking but nothing of real value for someone to consider purchasing.
Sorry, I haven’t got $350 lying around, even for a beautiful pocket knife. Thanks for showing it to us.
LOVE the thumb stop !!!
can I get it in CPM Magnacut ! !! That knife is BAD ASS
Its a very nice knife and the no hardware look is cool. $350 for the non coated? Meh. $50 more can get an integral, made by a more reputable Chinese company, designed by by a popular YT knife guy. Id much rather pay the extra 50 personally. Shoot I've been seeing the MT anax going for around 400 a few times. Just my opinion.
That’s a lot of $ for a Dark Knight poker.😂
Nice almost standard knife.
Whoa thanks for those remette comparisons.
It more fun to speed it up like the yellow one
You should work for QVC .
Very nice looking. Reminds me of one of those cyber trucks. Remette 👍🏻
Except cybertrucks don't look nice.
I do like the styling, great knife. Thanks
Love seeing cool knives, then never having interest again once I see the $300+ price tags.
How much to manufacture in China?
If remette is kicking so much ass, tell them to fix the slightly crooked remette lettering on their knife pouches. Just looks kind of janky! I paid 200 bucks for a remette, the least they could do is take the time to center and straighten their branding. I thought it was just mine but I saw more crooked lettering on metal complex reviews and now Beez Blades! Sorry, just a tiny annoying nit pick!😂
There is no way this knife is worth this much excitement. The design doesnt do it for me. I like old school looking stuff. This stuff all looks like it belongs in movie Judge Dredd.
This is the longest ad read ive ever experienced.
Dude. That's actually really cool, but not $250 cool much less it's actual price.
A Chinese company producing knives in China. I hate that my phone is produced in China but at least most of my dollars go to an American company that has freedom of speech and basic human rights.
howz it all
Are they hiring influencers & TikTokers to design knives now!? This looks like a cheap Chinese gas station knife, but in order to properly service it you've got to figure out some impossible puzzle! Decent $40 beater blade, but only if it comes with a lifetime warranty & was domestically produced...🤙
Steel?
if it was 60 bucks id get one...
For the cost, I want a knife that will save my butt in all situations...in the city and in the woods. This knife does not inspire that level of confidence. There are tool knives and there are art knives. To me, this is an art knife. I have seen some gentlemens knives that would likely make a better tool than this, while still having some degree of style.
PFAEFFF AND THE KNIFE OPENS ☝
Did I just watch an infomercial?
BOTH TYPES OF DEPLOY !!! wow ...
Remette…got to love ‘em!!!
American workmanship put this knife to shame.
Could you tell us how you really feel??
That is a good looking blade great video beez 👍
im getting Olight arkfeld ultra in OAL vibes!
Yeah that’s nice.
DLC is cool until the 1st scratch. 😂
That was absolutely awesome
Breaks down like an AK47
Hope you’re never wet, sweaty, muddy or bloody…or that thing’s gonna slip-launch away from you.
Knife collectors have some serious life balance issues and need to spend their time, money, and energy on something which is beneficial to their emotional and personality growth.
But wait! There's more! Ginsu salesman.
I like the knife, but where is the innovation? For example, Rike has had the Lamella for a while now, with the same construction principle.
Hey, wanna see my wheel? It's round... like all my other wheels 😂
Love that blade!!!
Would you look at that thing? Would you just look at it? Just look at it. It's sitting right there in you're hands looking at you while I just look at it. Ohhhhhh. Ooooooooh ohhhh it's so beautiful would you just look at it shimmering off of the light would you look at that? Ooooooooh ooh oh ohhhhhhh would you just look at it? Somebody told me there is much prettier and I said pshhht would you just look at that? 😂😂😂
Wow beautiful ! I agree though , too much money ! 😢thanks 🐝
Over $300 for a knife made by an enemy? We deserve to lose whatever conflict is next cuz we are monumentally stupid.
That looks great.
Wow, that one is fantastic. I like it mucho !
Cold Steel is better. Not worth paying $380 for that.
If you can’t use a knife day to day what’s the point!!!
Collections are one thing but unless you are wealthy forget it
The cost of knives will not feed your family 😏
Wow I love it and had to order one.
That's a goin' out knife 😎
very Tashi Bharucha esque...
Very cool knife, I would do 180 but never 380, just buy a gun for that much. 😉
Very interesting handle
You said you don't know who makes there knives. Maybe you could find out for us 🤪
If it’s not made in the USA 🇺🇸 I don’t want it 💩
I like mayonnaise
I'll take one 40$
I want one ....
IT IS Awesome!!!!!!
Interesting concept