Perfect! 👍 I’m getting these exact ones for my ‘05 4-Runner. 0 offset as well. There on backorder though, I’ll be waiting a bit. * update: 6 months later and they’re here! I went with stock tire size 265/65/17 With the wider rim and zero offset, and no plans on lifting, it looks perfect! They’re not too popular here in Michigan, that I can tell, and they’re not blingy at all so most likely not on the criminal’s radar. I also got Gorilla lug nuts to deter thieves a little. Best looking wheels I’ve ever seen!
I agree. RRW is paying attention to the factory wheels and specs to come up with logical alternatives. I'm getting a set soon for my 4Runner build, but for 285s and an Icon lift. Good luck with your build.
I just got 285/ 70 /17 mickey Thompson with raceline bronze 17.8.5 wheels 0 offset. with a three inch lift to be installed soon . I I was real worried about the offset look , but your video straightened me out. They'll sit perfectly flush. I have the Trd pro 4Runner so the front bumper is trimmed at the factory. It won't rub because of the lift and factory trim also I'm getting spc upper control arms fully adjustable so I can move the wheels if needed and get perfect camber and cast. Great video nice wheels too
Great! I just last week installed 3/2 lift also 285/70 K02’s. I just need to trim the front-side plastic a little. It only rubs in reverse at full lock with small bump.
Same! I have an 04 4th gen, I'm trying 2 figure out between toyo open country A/T and Nitto Ridge Grapplers, but want my 35s sticking out. Had no idea when ur buying wheels there's offset as well. 🤕🤯
Hi Catalla, i'm about to get a new set of tires and i would like to get 275. I've an stock SR5 with black matenTRD Pro Wheels. In your experience, if i put the 275 with stock suspension will i experience some rubbing??
I got the same but with -12offset and 285/70/17s. Man I think it is the cleanest looking wheel for these 5th gens. With the -12, stick out is barely noticeable but I don’t regret it at all. Looks super aggressive and very clean.
@@K_oa On mine, it still rubbed at rear at full lock. I couldve moved it a bit more forward with the SPC UCA but that means more cutting on the front fender and I didnt want to do that because only so much can be cut out of the fender before it starts looking noticeable. For me I prefer the BMC because its hidden plus youre able to keep factory caster settings. I know some guys likes more caster but I tried 4 degrees and I hated the way it steers.
The wheels look great, but what really adds to your rig is the Trump sticker. Love it. I'm looking to get a 4Runner and really like those wheels, I just might get me some. I'm way up in Vancouver BC so we won't be seen together. I just checked out RRW webpage they got a front bumper that looks pretty sweet.
I really want the front bumper that is made by Greenlane Off-road to match my sliders/steps. All of their products are made of aluminum but supreme quality fit and finish. Greenlane made in Canada. Cheers 🍻 Trump 2020
Thanks for watching! These are the best looking Wheels I’ve seen on 4Runner. They look even better in the sunlight. Congratulations on ordering yours. I am anxiously awaiting a full roof rack and ladder in powder coated aluminum from Greenlane off-road. Check back in a few weeks should have a video up of the new rack!
@@jllineros I installed the 2.5" Bilstein kit. I trimmed the bumper with a dremel, pushed the liners in and still have some rubbing on passenger side full turn sometimes. Could be the Cooper ST Maxx 285/70/17 tires... Highly recommend the offset, wheels look great. If you dont want to trim the fenders, go with a smaller tire? I will get around to trimming the last bit, but to be completely honest, NOBODY will ever notice a half inch shave under the bumper.
@@K_oa No UCA. Since the Bilstein's have a ring you can adjust in 4 slots which determines how much lift you get out of the front. Initially I had set it to to the third ring (2" lift i think). After the rub issues, I had to do it all over again and adjust to the 4th slot (full 2.5" lift) and now that its done, I am glad I did it. What was making me nervous was the truck only had 600 miles on it when I did all this. The passenger liner is a little more.. bulky(?) than the driver side so you have to trim a bit more. Once I got over cutting up a new truck it was fine. Ha! If I could do it all over again, I would go -12 again. All day. Good luck with yours!!
I actually ordered Method wheels 17" x 8.5"/0 Offset matched with Toyo Open Country AT3 tires from Tire Rack. I also drive a white 4Runner SR5 Premium.
@@project4runner271 I can't wait to see how they ride. I'm also considering lifting the front suspension to level the truck. I'll ask my local Toyota dealership because I don't want my warranty to be voided.
@@project4runner271 I got my wheels installed 3 days ago. They're 17" x 8.5" with a 0 offset. I purchased the Method Racing wheels matched with the Toyo Open Country AT3 tires. I love the ride so far.
I just purchased a white 4Runner SR5 Premium. I love it! Down the road, I want to switch the factory tires but keep the factory wheels. I'm looking into the Pirelli on/off-road tires. :)
i went with the fn fx pro wheels, same dimensions as yours except about 2 lbs lighter for each wheel, i go off roading once or twice a week but still wanted some better gas mileage
Great stuff buddy. Can you advise what is the model year of your 4Runner? I am in the market for a limited edition, I just wonder if those wheels will do well on the Limited and if the ride confort would be jeopardized. Thanks a lot
2018 TRD off-road premium. It shouldn’t change the ride much at all and it will add 2 inches to the overall stance. I’m assuming if anything it will make it more stable with a wider stance.
Race Relations in seriously bringing some heat to the wheel market. They putting out some solid products. Did you recently buy these? They website always says sold out. Atleast as of late.
Chris G Just installed within the last couple weeks. I guess you just have to catch them when they get a new shipment in, or maybe pre-buy. Thanks for the comment.
Hey man great looking 4Runner!! I went with the same wheels on my 4Runner as well but in matte black. So no rubbing at full lock? I'm running stock tire size with general grabber atx's and have a 1.75" lift and still get some minor rubbing only at full lock though.
I have a white sr5p and I went with a vision nemesis rim, they are also gun metal. They have -12 offset and I have them on 275/70/17 ko2s. The front rubs just barely on sharp turns.
Jeremy that’s a good tire size that you put on there. I wish it came in C rated. I only have stock size Ko2’s on mine and the first set I got were E rated and I was never quite happy with them. I recently traded them in toward a set of the C rated stock size and I’m much more happy. I even had them swap out the spare with the Ko2 looks nice under there. Maybe someday I will get the 285’s in the C. Cheers
l catalla Right! I need to decide on which lift kit to go with before all that. Unfortunately I ruptured my Achilles’ tendon a couple months ago and 4RUNNER had to be put on pause 😔 Thanks for watching and contributing!
@@project4runner271 thanks for the video bud. Am looking to go for the same wheel specs with stock size tires. Icon rebound wheels with 8.5 width and 0 offset, only the BS is 4.75 . Stock 2018 Sr5 and hoping it Not to rub. Any inputs regarding rubbing, just don't wanna trim any plastic and things. Thanks.
@@RCGJR_ it did not rub combined with my 3" lift from OME. Once I put on JBA high caster UCAs it did rub a little but I got the alignment shop to push to 4.0 and 4.1 degrees of caster and it stopped rubbing. I refused to take off my mud flaps.
I bought my first 1995 Toyota 4runner..im going with stock tiers..or what the manufacturers recommend. Micky Thomson from Wal-Mart $217.99 each (not cheap)
www.relationsracewheels.com/collections/toyota-4runner/products/rr5-s-17x8-5-6x5-5-tacoma-4runner Looks like they are sold out! Stock size Bf Goodrich K02 tires though
I have installed 30mm wheel spacers after a 2 inch suspension lift on Prado. The wheels are still stock. I have 3 options. Should I get -12 offset and remove spacers? Or Keep spacers with stock wheels Or Get -12 offset and let the wheel spacers be there..
So you went completely oem size on wheels too get this look because that's my problem I don't want to change anything and I was gonna go a -12mm offset but now I'm worried it will rub. Have to say I do love that color too I have a salsa red and that color would look great on mine.
My stance is actually 2 inches wider than stock, 1 inch per side. If you go with a -12 with the same backspacing that I have your stance will be closer to 3 inches wider, 1 1/2 inches per side. If you turn your steering wheel to full lock in one direction you can see where adding 1 1/2 inches will leave you.
Do you have any side shots showing the vehicle in some light ? I’m about to pull the trigger on these EXACT wheels lol same color and everything but I’m concerned about the color of gunmetal in the sun ?
Nice Ride! I noticed in your video that you said you went 1" wider than stock (7.5" to 8.5"). Everything I see online says the stock TRD wheel width is 7" , making 1" wider, and 8.0" install. I'm on the cusp of ordering wheels & tires for a 2022, based on yours looking perfect. If you could confirm the 8.5", that would be much appreciated. thanks !
I believe that the TRD pro wheels are actually only 7 inches wide. At the same time the TRD off-road wheels which were the stock on mine were 7.5. These are definitely 8.5 that I put on though/ with 0 offset. Sorry about the delay in the reply.
I measured my trd pro wheels and they are closer to 8 inches. I've heard on forums they are 7.7 inches dunno. I'm just reading my tape measure and is reading well past 7.7 inches and I measured my new 8.5inch rims and they measure closer to 9 inches. very confusing. There must be a offset measuring point or something going on.
@@DavidRamirez-fe5dd I have never actually measured them with a tape I just trusted the documentation on them. You probably need to measure to the insides of the beads not the outsides.
Getting those wheels too but for my Rav4 2021 hybrid in grey. Do you think gun metal would suit better than black wheels on dark grey RAV4? Thanks in advance!
Anyone know if the stock 265/70 wheels would rub if you get these wheels with the -12 offset. I don’t have a lift right now but might get it done in the future. Thanks
It will rub. If you turn to full lock and look at clearance the -12 with 8.5” wide wheels will add 1 1/2 inches to the outside edge of your stock setup
The -12 would look great but you’d at least have to remove mud flaps even with stock size all terrains. With level kit or more lift you might be ok though.
Good morning Rusty! I’m curious to know if those gunmetal wheels appear lighter in the video than in person. What’s your opinion? I also have a white 4runner and interested in gunmetal or matte black.
@@project4runner271 Nice video and truck. I have similar decals, but you need to correct your passenger flag. The stars are where the pole connects, and having them facing the rear implies running away from the fight, which we would never do.
freedom fighter Great explanation. I guess that you are on this side of the embedded politicians for life that have made millions off the backs of us Americans.
Sorry don’t remember what brand. I didn’t know that the stock wouldn’t work until I took to my local shop and they ordered some got within a day. Just double check the size on RRW website and if they’re sold out hunt down that size elsewhere. Good luck!
Is everything with the suspension stock? Truck looks great! Just trying to figure out what it would take to get a trd off road stock to look like this.
Stock suspension, Stock size BF Goodrich K02, and these ☝🏼wheels in the zero offset. Also get the badging blackout kit from amazon(it seems expensive but it is totally worth it) best $70 I’ve spent. Hope that helps!
I ordered these … 12X1.5 EXTENDED THREAD / ET (SET OF 24) As per note on RRW website * It's a known issue that the Tacoma, 4Runner, and GX have short wheel studs. Upgrading to aftermarket wheels causes the lug seating to change to a conical seating, which then results in less thread engagement than what the factory wheels and lug nuts can obtain. The solution is to use our compatible ET (extended thread) lug nuts. The shank of the lug nuts fit snugly into the wheel's lughole, resulting in more thread engagement and a better peace of mind.
Hey Rusty, I ordered those exact same wheels after watching your video here. So thanks ! The wheels just delivered yesterday and I’m having them installed this weekend. Help a brother out - Which exact lug nuts did you buy, and where did you buy them from? I need to pick these same ones up, but need to know brand & size (part # if you have it would be awesome!). Thanks for your help & advice !
I had mine installed at discount tire. They had to next day air order some for me so I really don’t know. Once I have time today I will try to track down the proper size and specs for you just by searching online.
Matthew Elkins they are 12mm x 1.5 , I just did a quick search on Amazon and there are several. Don’t go with the cheap ones and also read in the reviews and make sure that they are fitting on 4Runner but I checked a few reviews and that’s the size.
Project 4Runner thanks Rusty! I saw that also, and the variations of diameter/length are throwing me off. I’m trying to find out how long the ones on your truck are, and their diameter too. Evidently, some of the reviews stated they bought them and they ended up being too short for aftermarket wheels. There’s also “spline” option lugs. I bought these and many of them arrived with rusted threads and several were chipped/flaking. Definitely sent me used lugs 👎🏻
Project 4Runner well crap. Couldn’t attach a photo McGard 64015 in black is what I purchased on amazon. Dimensions were 1.45” overall length. 3/4” hex. Conical, and 12x1.5 thread size, of course.
Nice set up bro. Simple and clean. I have a 2019 Toyota Hilux 4x4 G here in Philippines ang im planning to buy BF KO2. Whats the performance regarding your usage of your KO2 in terms of Fuel efficiency, road noise and off road capability? Thanks bro.
Fuel Efficiency wasn’t noticeably affected( I do have the lighter C-rated k02’s). Road noise is not bad at all. They’re also good off-road.( I’ve really only used them in sand). Cheers Bro,I’m jealous we don’t have Hilux here in US.
Dude I just went on their website needs exact wheels are in stock and ready to ship. www.relationsracewheels.com/collections/rr5-s-17x8-5/products/rr5-s-17x8-5-6x5-5-2019-ford-ranger?variant=31977520595026
For some reason that link that I gave you is for the Ford Ranger wheels but I am pretty sure that the 4Runner ones are in stock and ready to ship. Good luck!
Anthony Szeto I’m in Florida, not sure how we would even broker the deal. Also I wouldn’t part with them for less than $500. Cheers to Texas though I was born in Houston!!!
@@project4runner271 Okay, I would pass on it. with shipping it may push over more than I would like to spend. Same here! GO TEXANS! hahha. I do appreciate your time.
@@SnIpErBoY1264 just stock size BF K02. If you go bigger than that you will need a lift and possibly to do some trimming also remove the mudflaps on the front.
Project 4Runner Oh btw my wheels are 17x8 -12 offset. I had to take off my front mud flaps and trim the fender liner. But it’s worth the aggressive look.
Alexander Estk I bet it looks sweet. I can’t wait to get a 3/2 Lift. Then I can consider the 285 c rated tires. The stock size tires aren’t wide enough for my wheels. Still looks good though. Cheers!
Bf Goodrich KO2 (265/70/17) Definitely a little bit of road noise but not bad for such an aggressive tread. Toyo just came out with a new all-terrain tire the open country AT3. They might be one step better than the BF good rich KO2 tires from what I’ve read.
When I see you try and use a straight edge in place of a level to get a plumb measurement I said well, no wonder he voted for Trump. Seriously though awesome Rims, Tires and great choice of size and offset. You can't be all bad.
Perfect! 👍
I’m getting these exact ones for my ‘05 4-Runner. 0 offset as well.
There on backorder though, I’ll be waiting a bit.
* update:
6 months later and they’re here!
I went with stock tire size 265/65/17
With the wider rim and zero offset, and no plans on lifting, it looks perfect!
They’re not too popular here in Michigan, that I can tell, and they’re not blingy at all so most likely not on the criminal’s radar.
I also got Gorilla lug nuts to deter thieves a little.
Best looking wheels I’ve ever seen!
I agree. RRW is paying attention to the factory wheels and specs to come up with logical alternatives. I'm getting a set soon for my 4Runner build, but for 285s and an Icon lift. Good luck with your build.
Thanks you too!
I just got 285/ 70 /17 mickey Thompson with raceline bronze 17.8.5 wheels 0 offset. with a three inch lift to be installed soon . I I was real worried about the offset look , but your video straightened me out. They'll sit perfectly flush. I have the Trd pro 4Runner so the front bumper is trimmed at the factory. It won't rub because of the lift and factory trim also I'm getting spc upper control arms fully adjustable so I can move the wheels if needed and get perfect camber and cast. Great video nice wheels too
Great! I just last week installed 3/2 lift also 285/70 K02’s. I just need to trim the front-side plastic a little. It only rubs in reverse at full lock with small bump.
Dig it man! Just bougjt a 2013 trail but so confused on wheel and tire size. This vid helped!
Same! I have an 04 4th gen, I'm trying 2 figure out between toyo open country A/T and Nitto Ridge Grapplers, but want my 35s sticking out.
Had no idea when ur buying wheels there's offset as well. 🤕🤯
I cannot wait to get a 5th gen 4runner 😎 hopefully get it before summer
Good luck my friend. You’ll love it!!
Dope wheels! I think you got it just right as far as the offset. I have a 2016 trail with stock wheels and upgraded to 275 without problem.
What wheel width on the 2016
Hi Catalla, i'm about to get a new set of tires and i would like to get 275. I've an stock SR5 with black matenTRD Pro Wheels. In your experience, if i put the 275 with stock suspension will i experience some rubbing??
This fool "project 4runner" suck at responding to people ??????
Looks sick
Hey man. I went with the RRW too. Not here yet. Can't wait. Thanks for the suggestion.
I got the same but with -12offset and 285/70/17s. Man I think it is the cleanest looking wheel for these 5th gens. With the -12, stick out is barely noticeable but I don’t regret it at all. Looks super aggressive and very clean.
Nice! How’s is the clearance with your wheel/Tire setup? What lift did you go with?
@@project4runner271 bilstein 6112 front with bilstein 5160 rear
About 2.75 front and 2.0 rear. Did have to do BMC and bumper trim.
@@s302jzget you needed a bmc? wouldnt it just be a fender liner mod and mud flap removal?
@@K_oa On mine, it still rubbed at rear at full lock. I couldve moved it a bit more forward with the SPC UCA but that means more cutting on the front fender and I didnt want to do that because only so much can be cut out of the fender before it starts looking noticeable. For me I prefer the BMC because its hidden plus youre able to keep factory caster settings. I know some guys likes more caster but I tried 4 degrees and I hated the way it steers.
do you have photos? im looking at doing the same on my silver 4runner but on the fence!
The wheels look great, but what really adds to your rig is the Trump sticker. Love it.
I'm looking to get a 4Runner and really like those wheels, I just might get me some.
I'm way up in Vancouver BC so we won't be seen together.
I just checked out RRW webpage they got a front bumper that looks pretty sweet.
I really want the front bumper that is made by Greenlane Off-road to match my sliders/steps. All of their products are made of aluminum but supreme quality fit and finish. Greenlane made in Canada. Cheers 🍻 Trump 2020
Fuck the Orange Buffoon!... (nice wheels though) 🤟
Dominique Stephenson no, fuck YOU! And yes, nice Toyota.
Looks killer
Happy birds in your neighborhood! Great looking tires and wheels!
Ordering mine now in -12. Thanks for the video. Would have loved to seen these outside in the light more.
Thanks for watching! These are the best looking Wheels I’ve seen on 4Runner. They look even better in the sunlight. Congratulations on ordering yours. I am anxiously awaiting a full roof rack and ladder in powder coated aluminum from Greenlane off-road. Check back in a few weeks should have a video up of the new rack!
hi, did you have any problems with -12 offset? do you have a lift kit?
@@jllineros I installed the 2.5" Bilstein kit. I trimmed the bumper with a dremel, pushed the liners in and still have some rubbing on passenger side full turn sometimes. Could be the Cooper ST Maxx 285/70/17 tires... Highly recommend the offset, wheels look great. If you dont want to trim the fenders, go with a smaller tire? I will get around to trimming the last bit, but to be completely honest, NOBODY will ever notice a half inch shave under the bumper.
@@patreesheo Did you get a UCA with the kit? Or was just only the suspension? How is the clearance issues now?
@@K_oa No UCA. Since the Bilstein's have a ring you can adjust in 4 slots which determines how much lift you get out of the front. Initially I had set it to to the third ring (2" lift i think). After the rub issues, I had to do it all over again and adjust to the 4th slot (full 2.5" lift) and now that its done, I am glad I did it. What was making me nervous was the truck only had 600 miles on it when I did all this. The passenger liner is a little more.. bulky(?) than the driver side so you have to trim a bit more. Once I got over cutting up a new truck it was fine. Ha! If I could do it all over again, I would go -12 again. All day. Good luck with yours!!
I would have never really looked twice at the wheels but once they are in the truck they look nice.
I got a set of the limited all gloss black with -12 offset and 285s. Nicest wheels for tacos and 4Rs imo
Congratulations! Sounds Sick.
Perfect for my liking..!! Thanks for the great video
I actually ordered Method wheels 17" x 8.5"/0 Offset matched with Toyo Open Country AT3 tires from Tire Rack. I also drive a white 4Runner SR5 Premium.
I am considering the AT3’s for my next tires!
@@project4runner271 I can't wait to see how they ride. I'm also considering lifting the front suspension to level the truck. I'll ask my local Toyota dealership because I don't want my warranty to be voided.
@@project4runner271 I got my wheels installed 3 days ago. They're 17" x 8.5" with a 0 offset. I purchased the Method Racing wheels matched with the Toyo Open Country AT3 tires. I love the ride so far.
@@pierre-richardromain6708 Awesome!
I'm going to try to get into the same vehicle. Trying to get out of the full size and go further down dirt roads and better parking at the mall.
I love that Sticker
RRW wheels are so dam popular theres a 6/8 week waiting lists to get your wheels
Those are really nice rims!!
Nice setup. Nothing to worry about. Clean and simple. I will as what your height is with the roof rails. I'm worried about my garage door.
Thanks! I’m anxiously awaiting a powdercoated aluminum roof rack and Ladder from Greenlane off-road.
Those are sick.
Beautiful Runner
narrow tires perform better in most offroad situations. wider is kind of a stance/look trend and good in sand and stuff, thats about it
True i run 285 wide in these TX sands they do just fine since the 4runner doesn't weigh a whole lot either
I just purchased a white 4Runner SR5 Premium. I love it! Down the road, I want to switch the factory tires but keep the factory wheels. I'm looking into the Pirelli on/off-road tires. :)
Nice! Congratulations on your purchase.
@@project4runner271 In regards to your video, did you add the BF Goodrich with stock height?
@@pierre-richardromain6708 Yes, stock height
@@project4runner271 No rubbing?
I don't get the all black trend to be honest. In most colors they look weird. Gun metal is the best color in my opinion . Great looking wheels!
Thanks, agreed!
Looks great
Looks good.
i went with the fn fx pro wheels, same dimensions as yours except about 2 lbs lighter for each wheel, i go off roading once or twice a week but still wanted some better gas mileage
Nice! Which tires are you running?
I checked them out. I guess mine are a 1/2 inch wider that must be the 2 lbs lol. Cheers Bro!
Hello Preston, I'm looking to get he same wheels as you. Is there a place I can follow you so I can see your set up?
Sweet ride and wheels!!!
Great stuff buddy. Can you advise what is the model year of your 4Runner? I am in the market for a limited edition, I just wonder if those wheels will do well on the Limited and if the ride confort would be jeopardized. Thanks a lot
2018 TRD off-road premium. It shouldn’t change the ride much at all and it will add 2 inches to the overall stance. I’m assuming if anything it will make it more stable with a wider stance.
Race Relations in seriously bringing some heat to the wheel market. They putting out some solid products. Did you recently buy these? They website always says sold out. Atleast as of late.
Chris G Just installed within the last couple weeks. I guess you just have to catch them when they get a new shipment in, or maybe pre-buy. Thanks for the comment.
Man you got birds in your garage😂
Like the wheels👍
Hey man great looking 4Runner!! I went with the same wheels on my 4Runner as well but in matte black. So no rubbing at full lock? I'm running stock tire size with general grabber atx's and have a 1.75" lift and still get some minor rubbing only at full lock though.
Hey thanks. I don’t have any rubbing that I am aware of. Are yours also 0 offset? I bet your wheels look sick in matte black!
I have a white sr5p and I went with a vision nemesis rim, they are also gun metal. They have -12 offset and I have them on 275/70/17 ko2s. The front rubs just barely on sharp turns.
Cool, so maybe a small spacer or lift and you’ll be good. Good to know! Do you still have the mudflaps intact?
Jeremy that’s a good tire size that you put on there. I wish it came in C rated. I only have stock size Ko2’s on mine and the first set I got were E rated and I was never quite happy with them. I recently traded them in toward a set of the C rated stock size and I’m much more happy. I even had them swap out the spare with the Ko2 looks nice under there. Maybe someday I will get the 285’s in the C. Cheers
@@project4runner271 I'd like to hear your thoughts after 285's upgrade.
l catalla Right! I need to decide on which lift kit to go with before all that. Unfortunately I ruptured my Achilles’ tendon a couple months ago and 4RUNNER had to be put on pause 😔 Thanks for watching and contributing!
@@project4runner271 sorry to hear, hope you're recovering well.
I am looking at this exact setup. Looks great. Do you have any lift or is it stock?
Not lifted in video. I am currently picking out a lift.
@@project4runner271 thanks for the video bud. Am looking to go for the same wheel specs with stock size tires. Icon rebound wheels with 8.5 width and 0 offset, only the BS is 4.75 . Stock 2018 Sr5 and hoping it Not to rub. Any inputs regarding rubbing, just don't wanna trim any plastic and things. Thanks.
@@teddynaicker2997 You’ll be fine! Mudflaps and all.
That old will look good on my truck
Looks good!
Any idea how these would look with -12 offset same size tires without lift
Those are super sexy, I did the ProComp Vertigo wheels with -6, I find the style is pretty similar to yours.
guitarguy092 any rubbing issues with your tire/wheel setup?
Any rubbing with negative off set?
@@RCGJR_ it did not rub combined with my 3" lift from OME. Once I put on JBA high caster UCAs it did rub a little but I got the alignment shop to push to 4.0 and 4.1 degrees of caster and it stopped rubbing. I refused to take off my mud flaps.
@@guitarguy764 oh you got a lift, i was asking from a stock owner 😂 i guess 0 for me, no lift just yet, just in the near future.
@@RCGJR_ My tires are 285/70r17 (32.7") so thats a big reason for the rubbing. With stock wheel size it still might work for you.
I bought my first 1995 Toyota 4runner..im going with stock tiers..or what the manufacturers recommend. Micky Thomson from Wal-Mart $217.99 each (not cheap)
But the fact that they are not flush is actually the cool factor!
Love the wheels
Will 275/70/17 on these wheels fit a 19 TRD off-road p? I wanna go 275
Might get a slight rub. Should look great!
After 1 year...how the tires feel on-road? noise levels? mpg?
I want to buy those exact wheels and tires for my 2021 runner. I want to know exactly what you have
www.relationsracewheels.com/collections/toyota-4runner/products/rr5-s-17x8-5-6x5-5-tacoma-4runner
Looks like they are sold out!
Stock size Bf Goodrich K02 tires though
I have installed 30mm wheel spacers after a 2 inch suspension lift on Prado.
The wheels are still stock.
I have 3 options.
Should I get -12 offset and remove spacers?
Or
Keep spacers with stock wheels
Or
Get -12 offset and let the wheel spacers be there..
Go -12 offset with no spacers! Maybe -25 if you want. To Me spacers create a weak link also rough on bearings. Good Luck!
So you went completely oem size on wheels too get this look because that's my problem I don't want to change anything and I was gonna go a -12mm offset but now I'm worried it will rub. Have to say I do love that color too I have a salsa red and that color would look great on mine.
My stance is actually 2 inches wider than stock, 1 inch per side. If you go with a -12 with the same backspacing that I have your stance will be closer to 3 inches wider, 1 1/2 inches per side. If you turn your steering wheel to full lock in one direction you can see where adding 1 1/2 inches will leave you.
Do you have any side shots showing the vehicle in some light ? I’m about to pull the trigger on these EXACT wheels lol same color and everything but I’m concerned about the color of gunmetal in the sun ?
Nice set up. I got a 2016 4runner limited. Would these fit without any rub?
Yes as long as you keep the stock tire size on.
Nice Ride! I noticed in your video that you said you went 1" wider than stock (7.5" to 8.5"). Everything I see online says the stock TRD wheel width is 7" , making 1" wider, and 8.0" install. I'm on the cusp of ordering wheels & tires for a 2022, based on yours looking perfect. If you could confirm the 8.5", that would be much appreciated. thanks !
I believe that the TRD pro wheels are actually only 7 inches wide. At the same time the TRD off-road wheels which were the stock on mine were 7.5. These are definitely 8.5 that I put on though/ with 0 offset. Sorry about the delay in the reply.
I measured my trd pro wheels and they are closer to 8 inches. I've heard on forums they are 7.7 inches dunno. I'm just reading my tape measure and is reading well past 7.7 inches and I measured my new 8.5inch rims and they measure closer to 9 inches. very confusing. There must be a offset measuring point or something going on.
@@DavidRamirez-fe5dd I have never actually measured them with a tape I just trusted the documentation on them. You probably need to measure to the insides of the beads not the outsides.
love the truck! love the rims! love the Trump stickers!
My Man LOL!
Nice build I have a Tacoma and I like those stock wheels u took off the 4 runner do u know how wide they are
17x7.5
Nice car ! Now go for exhaust
Thanks, It’s had a Gibson cat-back for almost a year😎
Getting those wheels too but for my Rav4 2021 hybrid in grey. Do you think gun metal would suit better than black wheels on dark grey RAV4? Thanks in advance!
nice floor fan. nice wheels too! lol
Are the center caps included or did you have to add on the the purchase?
We're you able to swap the stock TPMS sensors over to the new RRW wheels?
Yes
Love the Trump sticker and Infowars bin 👌🏻
saw sticker , wrote comment , stopped watching . grooooosssseeeeee.........( nice wheels though ;)
@@DaSimSimma cool story bro.
@@mtfishingwizard jesus christ you trumpers are some gross a$$ people...it ain't even politics , you're just ... gross
@@mtfishingwizard hey bud. Just checking in . Everything cool? Working out still ? Gotta keep on those triceps man. Nothing worth while ever came easy
Trump doesn’t like foreign vehicles, sell the runner and get a jeep!
Im confuse which to get. I like a little bit of offset, but is it bad?
Toyota did not intend for the 4Runner to have very big tires and a large negative offset. That being said I think that the zero offset is perfect.
trying to buy these rims. Is "RR5-S 17x8.5 (6x5.5 / 6x139.7) HUB-CENTRIC / Toyota Spec" The model you purchased? Thanks for the help
Yes 0 offset!! Enjoy
Anyone know if the stock 265/70 wheels would rub if you get these wheels with the -12 offset. I don’t have a lift right now but might get it done in the future. Thanks
It will rub. If you turn to full lock and look at clearance the -12 with 8.5” wide wheels will add 1 1/2 inches to the outside edge of your stock setup
They are the best looking wheels on the market
Thanks, and thanks for watching.
Damn, that thing looks so good. Except that bird shit on your side windows. ;)
So it looks like the 265 -12 offset would be flash.. sweet rims though Im stickin to 265 too
The -12 would look great but you’d at least have to remove mud flaps even with stock size all terrains. With level kit or more lift you might be ok though.
did you find with the zero offset it threw any rocks up on the side of the 4runner?
Good morning Rusty! I’m curious to know if those gunmetal wheels appear lighter in the video than in person. What’s your opinion? I also have a white 4runner and interested in gunmetal or matte black.
They may look a tad bit lighter in the video because of the lighting. I definitely recommend the gunmetal no regrets here!!! Good Luck!
is it safe even the Tire are spread because of the wide Rims 8.5"?
Love the window sticker!
Thanks, very observant fellow patriot!
@@project4runner271 Nice video and truck. I have similar decals, but you need to correct your passenger flag. The stars are where the pole connects, and having them facing the rear implies running away from the fight, which we would never do.
Matthew Legere Good point! They don’t make this sticker in that direction lets just say I’m riding into battle while also watching my six. God bless!
That's a Good Way to Get Your Truck Keyed 😬
Dan Serrano Haha,not in my town thankfully. I don’t shop at Wal-Mart or it may have happened already though 😂. Have a good day!
Thanks for the info....you lost me w that frump sticker though
Just curious here. What does a so called freedom fighter have against Trump?
Project 4Runner if you don’t hate frump, then you missed the point and are part of the problem
freedom fighter Great explanation. I guess that you are on this side of the embedded politicians for life that have made millions off the backs of us Americans.
What size are your tires? 17in or 20in?
265/70/17 (stock size)
Where did you find those wheels I looked them up on their website and and can’t find them?
www.relationsracewheels.com/collections/toyota-4runner/products/rr5-s-17x8-5-6x5-5-tacoma-4runner
Nice
Would the stock TRD pro 17 rims fit without rubing on stock tires?
Yes
So you're running 265 size tire for that AT. My question is are you running a lift? If not then thats dope.
No Lift yet. Thanks
265 are stock size. You should be fine running any kind of 265 tire on a 4runner.
Ahh man choo
What about tire size 275 will it rub?
You got an automatic like from me when I saw your back passenger window decals!
What lug nut brand did you go for your new wheels
Sorry don’t remember what brand. I didn’t know that the stock wouldn’t work until I took to my local shop and they ordered some got within a day. Just double check the size on RRW website and if they’re sold out hunt down that size elsewhere. Good luck!
Any update?
Is everything with the suspension stock? Truck looks great! Just trying to figure out what it would take to get a trd off road stock to look like this.
Stock suspension, Stock size BF Goodrich K02, and these ☝🏼wheels in the zero offset. Also get the badging blackout kit from amazon(it seems expensive but it is totally worth it) best $70 I’ve spent. Hope that helps!
Also don’t forget the Gibson Catback exhaust with the big, black tip 😂
@@project4runner271 Haha that's fantastic. Thanks for the reply!
What about sr5 I think trd front are higher than sr5?
Trd Pro is 1” higher up front. Trd off-road is same as sr5.
Thanks
Just ordered the same wheel in all black for my 2020 ORP 4R, did you buy longer lug nuts ?
The stock Lugnuts definitely won’t work. I don’t remember the ones that you need but they are somewhere in this comment section
You can find the lugs on the RRW website although usually sold out
I ordered these …
12X1.5 EXTENDED THREAD / ET (SET OF 24) As per note on RRW website
* It's a known issue that the Tacoma, 4Runner, and GX have short wheel studs. Upgrading to aftermarket wheels causes the lug seating to change to a conical seating, which then results in less thread engagement than what the factory wheels and lug nuts can obtain.
The solution is to use our compatible ET (extended thread) lug nuts. The shank of the lug nuts fit snugly into the wheel's lughole, resulting in more thread engagement and a better peace of mind.
How do they look?!
@@project4runner271 Don’t have them yet, waiting for Fed Ex to deliver.
whats the load rate on the tire
c, e???
Not sure you’ll have to check their website.
wheel and tires it cost for the set?
Hey Rusty, I ordered those exact same wheels after watching your video here. So thanks ! The wheels just delivered yesterday and I’m having them installed this weekend.
Help a brother out - Which exact lug nuts did you buy, and where did you buy them from? I need to pick these same ones up, but need to know brand & size (part # if you have it would be awesome!).
Thanks for your help & advice !
I had mine installed at discount tire. They had to next day air order some for me so I really don’t know. Once I have time today I will try to track down the proper size and specs for you just by searching online.
Project 4Runner thanks man! Yea, if you find the particulars please let me know. I can’t find any that work perfectly.
Matthew Elkins they are 12mm x 1.5 , I just did a quick search on Amazon and there are several. Don’t go with the cheap ones and also read in the reviews and make sure that they are fitting on 4Runner but I checked a few reviews and that’s the size.
Project 4Runner thanks Rusty! I saw that also, and the variations of diameter/length are throwing me off.
I’m trying to find out how long the ones on your truck are, and their diameter too. Evidently, some of the reviews stated they bought them and they ended up being too short for aftermarket wheels. There’s also “spline” option lugs.
I bought these and many of them arrived with rusted threads and several were chipped/flaking. Definitely sent me used lugs 👎🏻
Project 4Runner well crap. Couldn’t attach a photo
McGard 64015 in black is what I purchased on amazon. Dimensions were 1.45” overall length. 3/4” hex. Conical, and 12x1.5 thread size, of course.
Did you have to lift or do anything suspension wise to fit these wheels or did you just have to switch them on no problems?
No lift yet! Just swap them out. The -12 offset would probably rub though without modifications.
@@project4runner271 nice thanks man. By the way im not sure if you mentioned it but what tires are you running
125ccMotoVlogger 265/70/17 stock size but K02.
@@project4runner271 thanks man
If you get the -12 offset would it rub
I believe you are right my friend. I think I made the right choice getting the zero offset.
Nice set up bro. Simple and clean. I have a 2019 Toyota Hilux 4x4 G here in Philippines ang im planning to buy BF KO2. Whats the performance regarding your usage of your KO2 in terms of Fuel efficiency, road noise and off road capability? Thanks bro.
Fuel Efficiency wasn’t noticeably affected( I do have the lighter C-rated k02’s). Road noise is not bad at all. They’re also good off-road.( I’ve really only used them in sand). Cheers Bro,I’m jealous we don’t have Hilux here in US.
Rusty...I love these wheels RRW is sold out but I have found some on Ebay...with 28 offset...what does this mean
Not sure. I only know of them coming in zero or -12 offset. Are they the 17”x8.5” size with six Lugs?
Dude I just went on their website needs exact wheels are in stock and ready to ship.
www.relationsracewheels.com/collections/rr5-s-17x8-5/products/rr5-s-17x8-5-6x5-5-2019-ford-ranger?variant=31977520595026
For some reason that link that I gave you is for the Ford Ranger wheels but I am pretty sure that the 4Runner ones are in stock and ready to ship. Good luck!
Project 4Runner ...Rusty...would the Ford wheel work on the 4Runner...the 4runner wheels are sold out on 0.0 off set....
Myles Folger I don’t think so. Have you tried emailing RRW?If I recall they were pretty good about getting back quickly. Good luck!
Hey, I’m looking for a set of the rims you took off. Do you want to sell them?
I wouldn’t sell them for much less than you can find brand new online. Then Shipping is expensive. Good luck!
Alright, cool. I think you are in Florida and I’m in Florida, I just thought we could do something. Thank you
Nice build, would this work with a regular sr5?
Absolutely!
@@project4runner271 Hey man, are you sure the rims aren't RR5-(F). On their website, the RR5-S doesn't come with a (0) offset?
CorbyIzTrill that’s the new version which are forged(very nice)
@@project4runner271 Awesome! I was hoping I could bypass the forged ones and get the regular RR5-S. Very helpful man. Keep up the videos
CorbyIzTrill I’m actually considering upgrading to the forged myself. They are a little bit lighter and maybe more stout.
Does this set up work with a 2003??
I am pretty positive it does. I would email RRW get their contact info from their website. Good Luck!
Do you still have your old wheels? wanna get rid of them? I'm interested.
I do have them, they’re in perfect condition.
I would consider selling them. Where are you located?
Project 4Runner I’m located in Texas.
Anthony Szeto I’m in Florida, not sure how we would even broker the deal. Also I wouldn’t part with them for less than $500. Cheers to Texas though I was born in Houston!!!
@@project4runner271 Okay, I would pass on it. with shipping it may push over more than I would like to spend. Same here! GO TEXANS! hahha. I do appreciate your time.
So you did no lift on them or anything to get them to fit without rub?
No lift and no rub. It’s close though at full turn.
Thank you. I’m gonna get rn same rims I think I really like them, what are the tires?
@@SnIpErBoY1264 just stock size BF K02. If you go bigger than that you will need a lift and possibly to do some trimming also remove the mudflaps on the front.
@@project4runner271 so stock size as in 265/70/17? Do you think 275 would fit with these wheels or would I rub?
@@SnIpErBoY1264 you might be ok. It would definitely rub though if you were at full turn and hit a bump.
I have pro comp rims with Toyo Open country ATs.
Very nice, I considered getting those same tires myself still may eventually.
It was a tough call for me but I love the highly aggressive look of the toyos. Rides excellent and I haven’t noticed any increased road noise.
Project 4Runner Oh btw my wheels are 17x8 -12 offset. I had to take off my front mud flaps and trim the fender liner. But it’s worth the aggressive look.
Alexander Estk I bet it looks sweet. I can’t wait to get a 3/2 Lift. Then I can consider the 285 c rated tires. The stock size tires aren’t wide enough for my wheels. Still looks good though. Cheers!
What type of Tire are you running with these and how is the sound on the road
Bf Goodrich KO2 (265/70/17)
Definitely a little bit of road noise but not bad for such an aggressive tread. Toyo just came out with a new all-terrain tire the open country AT3. They might be one step better than the BF good rich KO2 tires from what I’ve read.
Great Looking 4Runner. Do these wheels fit the center bore just right or did you require rings. Thank you.
They are hub-centric spec’d just for your Toyota 😉
I believe that they also specify when you’re choosing options on your wheels. Hope that helps!
Project 4Runner , thank you for the reply. Did you get them right from the RRW website?
Howard Lee Yes, no middle man pretty good price. I believe it was free shipping also I couldn’t believe the price I got them for.
Project 4Runner, thank you for the reply. I will check them out.
Love the sticker on the window :)
When I see you try and use a straight edge in place of a level to get a plumb measurement I said well, no wonder he voted for Trump. Seriously though awesome Rims, Tires and great choice of size and offset. You can't be all bad.
At 8.5 wide with 0 offset, wouldn't they be a 4.75 bs? I know factory is 4.50. Stance looks nice.
Not sure, if I remember correctly backspacing these were the same as the factory wheels.
Factory has a different offset
Look very nice, I try to order but so out :(
Damn! Good luck
That is one loud ass bird. What is the wheel size on those rims? 265/65/17?
Lol Stock tire size
Gantry Crane 265/70/17