How To Replace Porsche Boxster 986 Updated Coolant Cap and Bleeder Valve

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 23

  • @hughrobertson7242
    @hughrobertson7242 10 หลายเดือนก่อน +1

    Great video-very clear 👍 Loved the fact you are ‘training ‘ the next generation of home mechanic too-always cool to have a little helper 👍 I’m off to replace mine now to fix my leaking coolant……. Thanks 🙏

    • @TheEddysGarage
      @TheEddysGarage  10 หลายเดือนก่อน

      Glad you liked it. My apprentice is getting better, bigger and stronger so I’ll keep him around

  • @colinfell3945
    @colinfell3945 3 ปีที่แล้ว +2

    Just replaced my valve, thanks for the great video 👍

  • @brianman233
    @brianman233 ปีที่แล้ว +1

    One thing that wasn't obvious to me from this or other guides, is when I was unable to press fit the new valve on by hand, due to the high amount of friction from the O-rings. However, gradually tightening the screws got it pressed in. No more leaks!

  • @Escu182
    @Escu182 3 ปีที่แล้ว +2

    Followed your guide today, really easy. Thanks a lot!

    • @TheEddysGarage
      @TheEddysGarage  3 ปีที่แล้ว

      We have to keep these cars on the road

  • @NewArt1
    @NewArt1 3 ปีที่แล้ว +3

    Best to buy an OEM brand bleeder valve from Porsche. I Used an aftermarket one once which cracked in half and left me stranded at the track! No fun. Spun out on my own coolant! 😱

  • @Wowwow-wl3kx
    @Wowwow-wl3kx 2 หลายเดือนก่อน +1

    why did you replace bleeder valve??

    • @TheEddysGarage
      @TheEddysGarage  หลายเดือนก่อน

      It had coolant leaking around the edges

  • @Wowwow-wl3kx
    @Wowwow-wl3kx 2 หลายเดือนก่อน +1

    what is the root cause?
    it seems related to this area.
    please somebody can help me.
    I asked dealer shop.
    but they don't know

    • @TheEddysGarage
      @TheEddysGarage  หลายเดือนก่อน

      My cap was old and valve was leaking. Replace the tank too if it is the original. They just crack from age

  • @wrightsee
    @wrightsee 2 ปีที่แล้ว +4

    Alway put the oil cap back on stops inadvertent risk of dropping contaminants in to the motor

  • @Wowwow-wl3kx
    @Wowwow-wl3kx ปีที่แล้ว +1

    I think I have older type coolant cap. If I keep what is the issue? I am suffering from hissing sound after coolant replacement.(water pump broken so coolant had leakage. after replacement water pump and coolant replaced..). Porsche dealer shop workde for that. but now I am suffering from hissing sound. I am wondering after change this cap hissing sound will be gone. or do I need to keep bleeder valve open(vertical position)??

    • @TheEddysGarage
      @TheEddysGarage  ปีที่แล้ว

      It won’t hold pressure. It’s cheap to replace and only get a genuine one from Porsche! Bleeder valve is only for bleeding.

    • @Wowwow-wl3kx
      @Wowwow-wl3kx ปีที่แล้ว +1

      @@TheEddysGarage what is function of bleeder valve?
      normally it keep to close or open?
      thanks for your kind reply~^^

    • @TheEddysGarage
      @TheEddysGarage  ปีที่แล้ว

      @@Wowwow-wl3kx allows trapped air to escape.

    • @Wowwow-wl3kx
      @Wowwow-wl3kx 2 หลายเดือนก่อน

      @@TheEddysGarageso bleeder valve set to vertical ??
      i still have hissing sound...
      dealer has no answer.

  • @frijus100
    @frijus100 2 ปีที่แล้ว

    hi i have problem with my porsche boxstrer 986 2002 every morning i need to up coolant is no leaking i think problem is with coolant tank when engine is hot coolant in tank is cold mey be you now whaits wrong?

    • @TheEddysGarage
      @TheEddysGarage  2 ปีที่แล้ว

      Pull back the carpet around the tank and look for a leak. Have you cleaned between the air con condensers and the radiators? It is easy to remove the front bumper and do it. Crud gets stuck between them and can cause them to corrode and is often a spot for a leak. Basically it goes like this:
      1. Make sure your rad cap is the current version.
      2. Check the valve for leaks like mine.
      3. Check coolant tank for leaks
      4. Check water pump for leaks
      5. Check radiators for leaks
      And 6. The worst one, get the engine tested for leaks which would be a head gasket and expensive. A shop will test the coolant for the presence of exhaust gas with a tester. Sam Crack had the problem on his TH-cam 911 997

    • @frijus100
      @frijus100 2 ปีที่แล้ว

      @@TheEddysGarage what is crud?

    • @TheEddysGarage
      @TheEddysGarage  2 ปีที่แล้ว

      @@frijus100 dirt, leaves, garbage. just stuff that is stuck there trapping water on metal. cleaning out between the radiators should be done once a year.