5 Fuel Tank Pressure Sensor Symptoms, Causes and Replacement Cost

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ก.ค. 2024
  • amzn.to/43i0HtT - All-in-One OBDII Car Scanner
    amzn.to/3x8fRWk - Fuel Tank Pressure Sensor
    Please Subscribe - bit.ly/maxcar_sub
    Watch the video to learn more about the various symptoms associated with fuel tank pressure sensor failure, and we will also discuss its replacement cost.
    Timecode:
    00:00:00 - Intro
    00:00:46 - Symptoms
    00:01:12 - Check Engine Light
    00:01:33 - Stalling or Hesitancy Under Acceleration
    00:01:48 - Fuel Odor
    00:01:59 - Loss of Fuel Economy
    00:02:12 - Lack of Power
    00:02:28 - Causes
    00:03:11 - Replacement Cost
    ******
    Disclosure: As an Amazon Associate, I earn from qualifying purchases. This means that I may receive a commission if you click on an Amazon Affiliate link and make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!
  • ยานยนต์และพาหนะ

ความคิดเห็น • 17

  • @johnbingaman3645
    @johnbingaman3645 2 วันที่ผ่านมา

    Thank you. This could be finally the end of my problem. Long as it's not built into the fuel pump a 2001 Saturn fuel tank pressure sensor I replaced the vac box charcoal filter. I replaced the celluloid on the block. I replaced the solonoid canister at the fuel inlet. Still check engine light P0446 for evaporation of fuel code ridiculous. These cars are overeengineered with all these sensors just for saving fumes, every time you open your gas cap, I can't catch them.

  • @romanstar7550
    @romanstar7550 7 หลายเดือนก่อน +1

    ABSOLUTE EXPERT LEVEL VIDEO DONE AS PERFECTLY AS POSSIBLE ! BEST MECHANIC VIDEO IVE EVER WATCHED

  • @lunapsebennarok6309
    @lunapsebennarok6309 20 ชั่วโมงที่ผ่านมา

    Another symptom, depending on your vehicle, removal of the fuel cap, while running, can cause a rough idle or cause the engine to die.
    2007 Hyundai Accent
    (Mexico: Dodge Attitude.)

  • @RCWrightX89
    @RCWrightX89 3 หลายเดือนก่อน +3

    Went to autozone to get my check engine code looked at. Of course their is no man around to help. They have a woman their who don't know anything about cars. She does the reading to check my engine. Says it's the Fuel tank pressure sensor. Now I ask where is that located to gage weather or not I can make the repair myself. I look up online and my search brought me video mislabeled to indicate Fuel injector pressure sensor. So I am thinking replacement is gonna be easy since it's right on top of my engine. I have a 2007 Ford focus. I order the part through autozone and guess what. The part is different. I did get a Fuel tank pressure sensor. But it's not the fuel injector pressure sensor I thought it was. So now I have this $140 part. I don't have the tools and know how to get to my gas tank. So I will need to take this to a shop. Awesome!

    • @marcusalancate1782
      @marcusalancate1782 หลายเดือนก่อน

      I took my 2015 ram 1500 truck to Autozone and was told it was the fuel tank pressure sensor but that part was not available to available to Autozone. 😮

    • @christianhudson589
      @christianhudson589 20 วันที่ผ่านมา

      I have a 2009 ford focus where exactly is the fuel tank pressure sensor located ? Is it right under the spark plugs ? From 05-09 they all have the same engine to my knowledge

    • @313barrygmail
      @313barrygmail 2 วันที่ผ่านมา

      You ordered it!!!

  • @mefobiajeep9866
    @mefobiajeep9866 9 หลายเดือนก่อน

    I have a p0456 small evap leak, and a smoke test shows no leaks. Sometimes under load I get a strong gas smell in the Air conditioning and the evap vent area by the filler tube. Wonder if this could be the cause?

  • @MrShauntheshep
    @MrShauntheshep 8 หลายเดือนก่อน

    Hello ,I have a honda accord 2017 ,I did replace the cluth and desconect the ECU a few times and When I star the car now has a few codes pop up, P107,po113,p2122,po102,p0452,,p0641,p0192
    I will appreciate your help
    c

  • @Justin-fq7vj
    @Justin-fq7vj ปีที่แล้ว

    On my 2008 Nissan Frontier LE has the pressure sensor in a canister along with another sensor . No in line filter. The gas won't go in if they go bad . It will keep the hose from the gas pump cutting off over and over. But really slow I manage to get gas in the truck. Oh and if you need one make sure you tell them it goes in the canister on the frame near the back of the truck.

  • @xyz1689
    @xyz1689 5 หลายเดือนก่อน

    A Great Vido! Please Kindly provide information about------------ tacoma 2010 FTP sensor location; Greatly appreciated!

  • @markduguay1706
    @markduguay1706 ปีที่แล้ว

    Does that sensor on certain vehicle read atmospheric pressure through holes externally and if they get dirty cause issues. Mechanic told me mine is malfunctioning cause the rust proofing guys sprayed oil on it. Or are these sensors sealed and that's BS.

  • @TheodoreMaart-nb1jq
    @TheodoreMaart-nb1jq หลายเดือนก่อน

    Ok nice is it necessary to remove the tank if I want to replace fuel tank pressure sensor ?

  • @tyleropal7896
    @tyleropal7896 9 หลายเดือนก่อน +1

    Nice AI video

    • @ibowhuntga
      @ibowhuntga 9 หลายเดือนก่อน +1

      Hope this was meant with sarcasm. It looks like someone took a lot of clips from other people's content, spliced it together and threw in a bunch of random obvious facts. The only content in the video that I thought may be of use was the estimated costs of repair.

    • @SamuTheFrog
      @SamuTheFrog 5 หลายเดือนก่อน

      @@ibowhuntga Are you dense? You more or less just strengthened the OP.

  • @holly-jothompson3717
    @holly-jothompson3717 ปีที่แล้ว

    Thank you for the video until this video. I thought id dumped 8 gallons of bad gas in my fuel tank. Turns out imay have a vacuum leak.
    I own a 2002 infiniti g20.
    A week ago i noticed the maf sensor tube that connects to the air filter housing. Needed to be repaired (2 tabs had broken a bit. So i went ahead and used jb weld
    2 part plastic weld to rejoin the plastic and left it to cure. After 24hrs. I reinstalled oem airintake tube maf tube and filter housing.
    Got in and started car. And car started running irratically And herez the main symptoms.
    Easy to start. And above 1200 rpms. Youd not even think anything is wrong. But when the rpms hit fall below 1100-1200. The tach acts more like how an altimeter guage would be displsaying thealtitude change with the plane in a stall dive plumeting toward earth at terminal velocity. Or faster.
    Yes the tach drops to zero. That fast once u cross below the 1100, 1200 rpm threshold. And engine will shut off or stall. Out.
    It idles strong and healthy at 1200. But on some kind of count cycle. That is i think between 30 seconds up to 60 seconds or oits every 45 seconds it does this i wanna say. Precision controlled. Rpm blip. Whrre yhe rpm jumps ftom 1250 to a precise rpm of i yhink orit seems like 1500. Like. Blip.. blip.. blip.. the decel and accel during these 3 rpm jumps. Seems like its a fully computer vontrolled action. Like its doing some kind of open loop(actively checking for new data incoming from sensors. So it can know what it needs to do. After the 3gontrolled throttle blips. Tge rpms will drop beliw 1200. And its in this rpm range 0-1000. And you try to accelerate. By depessing the gas pedal, it sputters hesitatez strugglesl like hell unyil the 1200 rpm once it reaches 1200 rpms. Its instantaneously starts running perfectly or if not perfectly it starts running 99999% correctly.
    Does any of this help to narrow down. What the falty part maybe.
    To add hopefully to help inform. Over yhe past 3-6 months. The car would sporatically. Upon placing the vehicle in park or also maybe ehile stopped at s light. The idle would suddenly sharply increase to a really high rpm idle. Most yimes a blip on the gas pedal would bring idle back down to its normal its regular rpm.