PASSENGER SIDE DODGE JOURNEY BLEND DOOR ACTUATOR REPLACMENT NO HEAT
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- PART # 68018109AA
STUCK ON COLD OR IT COULD BE THE OTHER WAY AROUND ON HOT IF THE ACTUATOR FAILED WHILE HEAT WAS ON.
• DODGE JOURNEY REAR STR...
#DodgeJourney
#BlendDoorReplacement
#DIYCarRepair
#CarMaintenance
#DodgeRepair
#HeatingAndACRepair
#AutoFix
#JourneyBlendDoor
#MechanicTips
#CarRepairTutorial
Sir your shitty video saved me alot of money!😂 Keep em shitty!
THANKS!!
Thank you for the information, I was able to successfully replace the part and its working fine now. The passenger side vents were blowing hot air when the ac was set to coldest. I removed the old part and it was jammed, the gears were not moving. Working fine now.
Glad it helped
O clicking but AC only works on one side. I will give this a try. Very good vid . bit of humour too😂
I just replaced the actuator but I'm still not getting heat on the passenger side. Any other ideas
maybe faulty part?
Same here. But I manually flip the door and still no heat. Any other suggestions?
You gave heat now. If so, what did you do?
You have
sounds like the blend door for heat and or ac is not opening or switching
Just swapped out the same one on the right that was clicking. Clicking stopped but hot air is still blowing from passenger. Gonna try and swap out the other one and see
Could be main blend door .....not sure about that!
@GunnersCarHole spotted the issue! While removing the blend door actuator on the left, the lever that controls the temp came out with it. It seemed to have dislodged itself from the second piece that corresponds with the temp control. It was stuck in the heat position. Also the motor in the actuator died.
What is the part number
68018109AA
No calibration ?
Nope! work fine after new one installed
Sweet@@GunnersCarHole