VW Tiguan Lowering Springs Complete Install Step by Step How To
ฝัง
- เผยแพร่เมื่อ 19 ก.ค. 2023
- In this video I show every step required to install lowering springs only on a 2020 VW Tiguan SEL Premium R-Line. This is part of the MQB platform and applies to other VW models as well.
//Links to Products and Special tools mentioned in video:
⭐️ Triple Square Set: amzn.to/3rGneC0
⭐️ Strut Splitter: amzn.to/3K8Ngnw
⭐️Spring Compressors: amzn.to/3Q6056a
⭐️ Impact Driver: amzn.to/3K8QgjY
⭐️ Lowering Springs: www.ecstuning.com (enter your vehicle information to find correct springs)
//The links above are affiliate links. By clicking on them, I may receive commissions at no extra cost to you. This small commission helps support the projects that educate and entertain yourself and others for years to come! Thank you for your support 😀 - ยานยนต์และพาหนะ
There's nothing more sexy than a lowered VW
Great video! I got a 2021 rline. I bought it already dropped and it doesn’t feel smooth driving it. Is there a “pro kit” I can get to change the feeling of it and to have smoother ride on bumpy roads?
solid videos man!
Thanks!
Great how to video! Do you have the toque specs for the front? Only the rear torque specs were mentioned.
Hi, great video, do you have now a tougher suspension, or it's not affecting comfort?
Hello, your video is great! I noticed you gave torque specs for the rear but not the front. Could you please give front specs, please?
Great video but how much did your torque the 3 bolts on top the shock, the 3 bolts for the ball joints, bolt for the link and the bolt at the bottom of the shock??? The m14 bolt?? And do they have to be under load??
Where are you located? Would you be willing to tackle this for my 21 Tiguan if I’m nearby?
Was the torque for the 18mm bolts 52 ftlbs or nM
The best height.... If I would lower a Tiguan would be by that much.
So how do you like the ride - it's been a few months since the install.
Great video. I just ordered the Bilstein Pro12 kit for our 2019 Tiggy and your removal and install just put my mind at ease. I'm going to try and do this without pulling out the axles as the bolts are showing not available. Did you need an alignment after the install?
Glad it was helpful for you! I’m sure it’s gonna look great after you get it all dialed in. I did end up getting an alignment and it was out so I’m glad I did.
@TimVChannel thank you.
Just completed the installation. Going for an alignment next week. This made a world of difference in how this Tiguan rides and drives. Had a bit of a hassle with the right front drive shaft coming out of the transaxle. Getting it all lined up again with the strut bolted to the body at the top was a struggle but it all the sudden popped into place and came together nicely in the end. It's an Advil night. It looks awesome too.
Dealership charged me 2 hours on rear only replacement. How long did it take you?
Is this your vehicle? How much does a job like this cost? I have a 2019 atlas and I have the sport springs as well. Just wondering around how much it would cost me for the install.
255-45R19 …255-50R19 olsa boşluk olmazdı..konforlu bir sürüş olurdu…