✅ Watch Next: Fixing GPU Sag on the EVGA Geforce RTX 3090 FTW3 Ultra Gaming: th-cam.com/video/e3bvlCs27go/w-d-xo.html ✅ Watch Next: Unboxing of the EVGA Geforce RTX 3060 XC Gaming: th-cam.com/video/EiGL5K3DOSQ/w-d-xo.html In Installing the EVGA Geforce RTX 3060 XC Gaming Graphics Card, we go over step by step how to install the EVGA Geforce RTX 3060 XC Gaming Video Card. This will help starters and pros alike. 🔥 EVGA Geforce RTX 3060 XC Gaming : geni.us/NaQwu
awesome my friend, it means so much to me that I could help you and even more that you took a moment out of your day to thank me, it means the world to me.
@@HashTagHell yea really good channel. I sold my 3080 a year ago when that hurricane hit us here in New Orleans and just bought a 3060 2 days ago (amazingly for only $220 with 2 year warranty!) to hold me till I go for a 3080ti later , so was checking out the vid.
I just ordered one of these today! Can't wait to game at more then 10fps with decent graphics. I have a 750ti with a memory problem, so this will be a great upgrade.
@@ThisBytesForYou I did! It's been doing really well! Since 9 months ago, I been using it in my Optiplex, and just today was able to get the side panel on. I had to use a PCIE extender to be able to plug the gpu in. The front USB plug was in the way, but that fixed it. Then I had a problem putting the side panel on, due to the 8 pin connector was out too far. So, just today I cut a hole in the door to close it. I must say though, it runs HOT with the panel on. The 3060 manages to get up to 89C under load. (Which is the max temp limit for this gpu, you can set in MSI Afterburner). And the cpu temp gets to 90C. It is a i7 3770. I think the fans are clogged from dust, since it's been 3 inches from the ground with the door open for the last 9 months. I need to take it apart to see though, since the gpu is in there somewhat permanently. The CPU cooler has also been needing a good cleaning. This is the most awesome Optiplex I have seen before lol. It has 32gb ddr3, a rtx 3060, and a i7 3770, with a ssd. And with the side panel on, it doens't look like it's worth more then any other cheap old Optiplex.
@@lockdot2 awesome bud, yeah Microcenter is awesome, but the closest one is 3 hours away from me, I made the drive once, never again, 3 hours there and 3 hours back, I will stick to Amazon and NewEgg haha. Sorry that you have to go through all of that with your system, but here are 2 videos to help you, this video is how to better cool your 3060: th-cam.com/video/uO351_LhGh8/w-d-xo.html and this video is on how to dust your machine, I will be making a new video soon but this will help: th-cam.com/video/YxoFkxO-Rco/w-d-xo.html so very happy you nabbed on my friend.
Thanks my friend, so very happy you enjoyed it and thank you so much for your kind words and observing the care I take,it means so much to me. Cheers my friend.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Did you uncheck everything for the Nvidia side, like he did for the AMD side? That part confused me. When he talked about AMD chipset, I thought he was talking about the CPU. So, uncheck all the boxes for an Nvidia install or no? I'm upgrading the exact same... 1660 Super to 3060 Ti
awesome my friend, so very happy for you and make sure to stay tuned and have the bell notification enabled, i have a lot of info on this card coming out.
@@SassiTV Nice my friend, I am working on a video now that you might enjoy, trying to get it out for tomorrow on this card and 1 or 2 more videos on it. Please stay tuned
Your videos are extremely useful and very thorough. As a noob pc gamer, having the step by step walk through help tremendously. Saved me during a blank screen when I installed my GPU. Thank you
Awesome my friend, thank you so much for your kind words, It really does make my day, I am so very happy I could help you my friend. Thanks so much for checking out the video, liking and subbing as well as taking a minute out of your day to thank me, it means so much to me. If you feel like you have any friends with issues, please make sure to share this video, it would help so much. Thanks again my friend and please let me know if you have any questions, always happy to help.
I was in my local Kelowna Best Buy this AM, I was shocked to see 3 of these on the shelf. As fast as I looked in that direction ALL three sold. I recommended your awesome video to the purchasers. Your video was invaluable to me on my install, I hope similarly it helped these 3060 purchasers!
wow, that is amazing my friend, it means so much to me that not only you recommended my channel and video, but even more than I could help you, and you took a minute out of your day to let me know I helped you, it means so much to me, thank you so much and it was my honor that I could help you. So, how much do you love this card.
@@ThisBytesForYou As a person who has never built a computer before, your video's were an invaluable step by step how to. I had a perfect build with no errors. I'm sure many people can likewise attribute their success to your concise how to video's. It's greatly appreciated your replies and interactions connect you with your subscribers. With regards to the card... I like it very much! it's a big step up from my Asus GT730 on my Samsung UHD monitor. The rendering and textures are amazing. Perhaps the one thing I greatly appreciate about your take on this card is the positive reaction to the quality, where as others have reviewed it in disparaging terms, sadly some have nothing good to say about it It fills a very interesting niche, especially for those of us who just needed a GPU (ANY GPU!) I was trying for a 3070 FTW. The RTX3060 came along first and was a compromise and for my needs was more than adequate. I overbuilt and need to learn how to get more out of my system. Cooler Master H500 RGB case with 3x200mm fans, Asus 590 Wi Fi Pro, Ryzen 5-3600. 500 GB M2 with Master Air MA620M cooler. 32gb HyperX pro RAM. Plus the RTX 3060 So far the temps have been well below 40! and I had to run your fan test to see if mine actually worked. A great thumbs up for what you do here on TH-cam.
@@takata98 Thanks my friend, I really do appreciate it. Sadly, many of us out here like to just bash things, it get's lot of views and comments, but it's not what I am looking for. I would love all the views, but not just because I am talking trash about the product, the product may have flaws, and I feel like i go over them, but in a constructive manner, no need to bash. I take each product I get as a new product, something new to all and put it through its paces, give you what I find, let, my opinions, and let you make the determination if its right for you, or you should skip it, I don't want to think for you, so I really do appreciate it, and the fact that not only you said thank you, which alone means a ton, but you broke down everything I helped you with, why it helped you and you recommended my work to other people, that means so much to me, thank you my friend. I found the performance great, for it's intended price, as well as thermals. You coming from a GT730, it was like night and day for sure for you my friend, that is a TREMENDOUS upgrade, congrats, but there is nothing wrong with overbuilding, in my opinion. Sure, it might be too much for you today.... but if you bought exactly what you needed today, then tomorrow you have to upgrade and it would cost you so much more, my 2 cents at least. Your build kind of sounds like a mix of my $1,500 build, and my over the top gaming build th-cam.com/video/9gg8w8BHGns/w-d-xo.html let me know what you think, and thanks again so much my friend.
Awesome my friend, so very happy you found this video and I really hope it does help you, I try to cover it all, though of course, I am human, I could have missed something haha. I hope to have the final review of this card coming out on Friday or Monday,... I am sooooooooooo surprised at it, you will be too ;)
Thank you very much for your detailed tutorial! I was happy to find one for the exact graphics card I bought. Now I'm not at all technologically inclined, but using your guide, I was easily able to switch out my Radeon RX 470 to this new one quite easily; only took about 20 min or so. Kudos to you, sir
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thanks for the video! The DDU stuff and the refresh rate setting for the monitor was super nice to know! I just got my 3060 XC Gaming today in the mail, and was looking for something comprehensive to finally upgrade my gpu! Thanks to EVGA's relatively short wait list for the 3060, which was awesome 😅. Upgrading from an old R9 280 that I'll be giving to a friend, their graphics card caught fire a few weeks ago and they definitely need anything they can get
AWesome my friend, so very happy you enjoyed this video and so happy that you got a 3060, such a nice card. Ouch, catching fire is rough, that is very nice of you to give them that 280, its an older card but it still does a great job today.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Wow! This was such a big help. Words cannot describe. Thank you for your clear step by step tutorial. The way you explained everything was perfect. God Bless!🙌🙏
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thank you for making this. Even tho i already had my old graphics card out and the new one in by the time i seen the video, the setup along this video worked seamlessly for me. Thanks
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thank you so much, dude. It was really helpful for me. I cleaned all the old drivers and files from my MSI Armor RX 570. I did a great jump buying this card. I'll see your others 3060 xc videos to configure It well. Cheers from Argentina!! 🇦🇷
awesome my friend, so very happy you enjoyed this video, and I am sooooo happy it worked out for you. I will have to say, when you go from NVIDIA to AMD and Vise Versa, your enter system will be a little slower in many things. I always recommend a clean install of windows, If you like, in this video I show you how to make a windows 10 thumb drive: th-cam.com/video/C759I7DBXd8/w-d-xo.html, then in this video, I show you how to install windows 10: th-cam.com/video/sNtlz1EoWBM/w-d-xo.html and then in this video I show you what to do after you install windows: th-cam.com/video/8JuC_Dpm6-c/w-d-xo.html. A clean install alone always makes your system perform better, but a clean install after an update helps too, just my recommendation. And cheers my friend, I have some family that lives in Argentina, I am Cuban myself, I would love to go sometime,... just so hard to actually go hahah, I hope you are doing well ;)
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. From a 950 to a 3060 XC thats a tremendous upgrade, good stuff bud
@@ThisBytesForYou I met a guy over Reddit, he’s been periodically sending me parts for no cost, the legend sent me a 3060! (this exact model), he sent me a motherboard, ram, cpu cooler, fans, power supply, basically upgraded my crap budget pc to something a bit more modern.
@@hl993_ that's awesome my friend, I am so very happy for you, I hope this video helps you get it in as well, and if you have any questions, please let me know.
Awesome my friend, so very happy I could help you. If you are not already, please do consider liking the video and subscribing, it would help a ton. Also, I come out with videos weekly to help you in all sorts of PC related issues and solutions. I am sure I will have more for you, if I don't already have it now in our large library of videos. Thanks again.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
awesome bud, I havent heard of memory express but it's awesome that you got one and got a card. So very happy for you and please do let me know if you have any questions on it.
Awesome my friend, so very happy I could help you. If you are not already, please do consider liking the video and subscribing, it would help a ton. Also, I come out with videos weekly to help you in all sorts of PC related issues and solutions. I am sure I will have more for you, if I don't already have it now in our large library of videos. Thanks again and thats a NICE upgrade dude, congrats.
i'm working on my first build and had no clue how to install a brand new geoforce rtx 3060 graphics card so I found your video and after watching it twice I successfully installed it. It will probably take me a couple more days to finish the build. I understand that when it comes to installing/updating drivers I should go to Nvidia. Thanks so much!
Always a pleasure my friend, I am so very happy I could help you. I release videos like this showing you how to upgrade, build and wire computers and a everything on PC's, new ones every week. If you like these types of videos, please make sure to subscribe. Thanks my friend and again, i am so very happy I could help you.
I have been watching your vids for a little while now, and realized I never subbed. Why? I dont know- but after reading your interaction with the people you have helped, and the genuine care that you expel when making these vids and/or replying to your subs made me run to the subscribe button. You are the type of person that deserves the subs. Thank you for all you do man, you're amazing!
well thank you so much my friend, I truly appreciate your kind words and support, it means a ton to me. I came from a time before the internet, hahah where I had people in my family that knew tons about computers, professors even, but no one had time for me, and the internet didn't exist, only BBS' and you had to know someones phone number to connect to their node and hope they had what you wanted.... it was rough. So, I learned everything on my own, everything, and it was expensive and I broke a lot. So years later, TH-cam came out, and people were showing similar, but they would skip over a lot of important stuff and speak techno babble, which would scare off people so I decided to make easy to follow guides, trying not to skip anything and it seems to be paying off, slowly, but its working it seems, I am helping many people and it feels good. I really do appreciate your kind words my friend, it is very heard warming and I hope I have helped you too.
@@ThisBytesForYou You and me both brother. I'm not ancient, but I'm not young either- I have four kids of my own, and now being in my mid 30's, I remember playing doom on windows pre-96- It was an absolute learning experience!! It's amazing to see someone with the passion you have for helping others in their endeavors technically. It's a lost trait anymore. Your dedication and true passion will shine through. It may take a little longer than the guys throwing out bs and clickbait, but as for myself, I'd much rather it take longer with me knowing my subs are actually there for me and my honesty versus being a 1 trick pony getting 1mil views over night for something that's inaccurate or "powdered" to cater to others pre-determined thoughts. You're doing it right and have my support 110%.
wow, thanks my friend, today is an amazing day indeed, your kind words kinda brought me to tear, going through some things right now and then just a few seconds ago 1 person just gave me a super chat on 1 video and then another super chat on another video, its an amazing day for sure my friend, I am incredibly humbled by you first (since you commented first) and this other person, I am really at a loss for words. Thanks again my friend.
@@ThisBytesForYou Keep your head up brother. Whatever it is that you're going through is just a minor speed bump on the road of Life. You'll overcome it! Thanks again!
@@bootenooties99 well, its a major speed bump sadly, but I have no choice but to just keep trucking, it's what I do, thanks again brother, I really do appreciate it
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
So I substantially followed the guide, with a few changes, and am up and running fine with the new card. It's striking how much smaller RTX 3060 ti xc is compared to my old RTX 2060. Running Windows 10 Pro, 22H2 on Ryzen 7, 3800x. Despite all the Debby Downer on the 3060 ti from a lot of quarters it was the right choice/price for a mid-life graphics card change on a 4 year old computer - that still does a good job on the games I play and functions I need. As Ellsworth in Deadwood: "Experience hard come by, but thoroughly learnt" on making sure graphics card is matched to motherboard. Killed my old Sandy Bridge-E motherboard during Covid after going from 2 to 6 gig with gpu change, then playing games that were it turned out at the edge of the system's abilities. My slight changes: 1. The PIN worked fine dealing with "Safe Mode". 2. To get to Safe Mode, I went Start - Settings - Update & Security - Advanced Start up Options. 3. This brought up Troubleshoot, clicked on that, then Advanced Options, Startup Settings, then clicked restart, once the machine started up, picked and pressed F4 for "Enable Safe Mode". 4. That brought up "Enter PIN", entered it and was operating in Safe Mode. In the DDU first time dialog, to be safe, I unchecked the INTEL Specific Options box also. Rest of it per video: unchecked the AMD Specific Options, and the Windows picks drivers prevention at the bottom. Used the swap as opportunity use my new hand vacuum/blower to blow and vacuum clean inside, the little PeroBuno $70 one on Amazon. Quite worth it.
awesome bud, happy I could help, The 3060, be it the TI or non TI are great cards, for sure. As for the changes, its understandable, this is a 3 year old video, so a change for sure is unavoidable, glad you were able to get it, as for the PIN, that's nice. It used to be that even though the pin allowed you to get into windows, it didn't in Safe mode, then caused others issues when trying to get back into regular windows mode, glad MS finally fixed that. NIce about the PeroBuno, I use the Xpower, I have had it for years and it still works great, if you want to check out the video: th-cam.com/video/YxoFkxO-Rco/w-d-xo.html So what did you think about the PerBuno, is it powerful and do the batteries drain quick? You mention its a vacuum too, the Xpower is just a blower, does it vaccum well?
@@ThisBytesForYou PeroBuno can vacuum and blow. 3 speeds. Vacuum didn't get as much as I wanted on the CPU, but the blower served the purpose. Very good attachments I think. Battery life can't tell on, but it's easy to charge. When I went to Windows 10 about a year before Windows 7 support ended, the PIN was enforced on me, even though I had a password. Seems like it superseded the password function at least in my case.
Going to start out with this gpu (normally I just rely on the one on the mobo) and got a good deal on a new one. Still hasn't arrived, but enjoy your videos and very helpful.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Please make sure that you have at least a 550Watt Power supply and 1 available 8Pin PCIE connection as this needs external power directly from the power supply. So what will you be using this for if you don't mind me asking?
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. 580 to a 3070, that's an AMAZING upgrade, congrats. You may not have noticed a big difference in games, that's because you may need to uninstall the games, maybe the clients, then reinstall them.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
awesome my friend, thank you so much for your kind words and support, it means the world to me. It is a nice card for sure, stock is insane at the moment sadly. Goodluck my friend, and please do let me know if you have any questions. Also, if you want to stay up to date with all my videos, please do remember to like and sub, it would also help a ton.
always a pleasure my friend, I am so very happy I could help you. I come out with videos like this helping you every week, if you like videos like this, please make sure to subscribe. Thanks again.
Appreciate the warning about static and then about the little clip. Definitely might have forgotten. GPU prices for this card have finally gone down to what I consider acceptable, so I purchased one. Been stuck with a 1050 ti for nearly 5 years.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Being that the prices have dropped and a new generation is coming this year, would you think maybe you could go up to a 70 series, that way you can get a little extra life out of your video card?
you are so very welcome my friend, so very happy i could help you. I have a ton I am working on, one kind of like this for the 6700 tomorrow as well, always on something. Thanks so much for your support, and make to sure to subscribe and click on the bell motivation icon so you know when my next video comes out. Monday's video is a little different, but who knows.
Can i just say most ppl dont take the time to ddu drivers in there vids and just do brand new copy of windows so its realy good that u did it thank you👍
always a pleasure my friend, everything I do on my own machine, I do here, to show you because this is my machine, so I take great care in this, so very happy you enjoyed it.
yes, I do recommend it as windows still has drivers built into it, older drivers, that have issues, its why they make newer drivers. The installer for the newer drivers does not do a great job at removing them, this will help.
Thanks so much for this. I buy my PC's from Digital Storm and the DP connections on the AMD card broke. Digital sent me a replacement card - an NVIDIA Geforce RTX 1030 TI. I'm handy but have never ventured inside the case except to blow out dust. Anyway - while there are a few difference with each MB and card, your video was a great help for this noobie.
awesome my friend, thanks so much for stopping and checking out my video and commenting, but even more for commenting so detailed, taking a minute out of your day to thank me, it means the world to me, I am so happy I could help you. If you have never done it, it is scary, but I try to help everyone and give everyone confidence to do things like this, all the way up to building an entire pc, instead of having to pay someone for the simplest of tasks, sometimes it costs more than the component itself. Thank you my friend ;)
Thanks bud, I do appreciate it. Yeah, DDU is amazing. Sucks, I uploaded this video last night at around 9PM, and the HD version is still processing, you probably saw it in SD
As far as I know, GeForce experience will automatically delete your old drivers and replace them. On first boot with the new GPU it will run off the Universal Windows drivers, then just run Geforce experience and it will take care of the rest. Thanks for making the videos on these cards, they are starting to hit the real market a bit. I got one today through EVGA's auto notify system.
Yup, I go over this in the video. It will delete the drives, what it can but its like you performing your own surgery, its hard to get everything a 3rd party doesn't care, it just focus' on what it needs to, never had an issue with it, but of course you can use which ever method you prefer. Congrats on getting the card, let me know what you think.
@@ThisBytesForYou Ah gotcha! I now understand your point in the video about having 2 options, good to use both to make 100% sure you don't have any driver conflictions. And I will! Upgrading from a 1650 Super, should be a major difference!
@@rxfaction9736 yeah for sure, oh and upgrading from a 1650, thats a nice upgrade, please do let me know how it goes, what resolution will you be playing at?
@@ThisBytesForYou Currently 2560x1080, I hit the silicon lottery on my 1650 super (Near 2Ghz constant clock speed), runs most my games medium settings at 75fps on that LG Ultrawide. I've been wanting to jump to 3440x1440, hopefully I'll be able to do that now!
@@rxfaction9736 well, this really isn't meant for 4K, even though thats not really 4K, kind of a hybrid... hmmm, it might actually work well, lt me know how that goes. What is the refresh rate of your monitor and does it have freesync/gsync?
Just got a 3060ti XC from tonight's drop! After 3 months of searching! Will certainly use this video to install it. Do you recommend buying a wrist band to ground yourself or can I just do what you did?
Awesome bud, so happy you can finally get one, it was rough getting this one too, it's crazy. As for the band, you can but I don't like to, I mention it in the video as well, you are good just follow how I show you in the video how to ground yourself
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou i own the Geforce RTX 3050 but i am not a gamer but a big fan of movies, i know if i'm buying the 3060 RTX, that's not making any difference in the graphics but i'm crazy and money's burn my hands, i really need to change it to 3060, thx for you fast response :)
My computer store told me the same thing man, wait the 4000 series but i got 2 works, no girlfriend, no house, no cars, this is only things i have to have fun when i'm not working, i think i'm gonna buying the 3060 tomorrow and a new graphic card in late 2023 with my computer store in my city :)
This video is super helpful, thanks for taking the time to do it! I did have two questions - I am about to install an my Geforce RTX 3060 by Aorus. I only had a integrated GPU and not an original video card - do I still need to uninstall drivers first? And secondly, my card has an 8 pin and a 6 pin connection - are those for two separate cables or a single cable that has the pig tail with two ends on one side? Thanks again and extra thanks if you find time to answer these!
@@joshbruins1861 actually, i missed the Aorus part, this one only had 1 connection, yours has 2, so yes, they would be 2 separate cables, do not use daisy chained cables.
I plan on upgrading my GTX 1060 to the RTX 3060. This tutorial looks pretty simple. Would I need to get a new power supply for this or would I be fine?
I can't help you if you don't help me, you have the PC in front of you, I don't but the video card requires 550Watts, wattage wise it will support it but since I have no idea what it is.... I can't tell you if you have the cables.
Thanks so much my friend, some might tell you differently, I kind of have a short fuse but I am trying sooooooooooooooo hard to fix that, I really do appreciate your kind words.
I just bought my 3060 today for a new computer build. In the mean time, can I replace my 1060 with my 3060 in my current computer? Or should I just wait for when I get all the new parts for my new build
meh, go ahead and use the 3060 on your old computer for now, when the time comes move it over, no reason to have it just sitting there, have fun with it.
Did you ever need nvidia’s new PCI-E shaped cable adapter? Or is it ok to just plug any PCI-E cable in as long as it fits? Just asking because I just got a 3060 OC and I wanted to make sure 🙏🏼 thank you for the video
No, that is only needed for the founders edition cards. You can use any 8 pin connection, just make sure all the pcie connections are coming straight from your power supply, you cannot pig tail the connections. Also, thanks so much for your kind words, it means the world to me and I am so happy I could help.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I got what you mean, but your display drivers come in sharp because Microsoft installs what they call, the best drivers because they are WHQL, but usually they are very old, don't perform as well and can have issues, even if they are WHQL, I recommend you do it all the time.
Then also, you are not paying a technician $100+ dollars to install the card, I am giving you the knowledge to do that, so yeah, the need is kind of there.
no offense taken at all my friend, but understand, while I would love to do everything for free, because I really do love doing what I do, this all takes up time, time away from my family or doing anything I want to do, so I come home from a long day in the office, then work some more at night, then all weekend. My time is valuable if not to me, then to my family and someones got to pay for it, since its not you, the ads pay for it. Then you are saving money by not paying someone to do it, and you have to watch a few ads, most of which you can skip, I don't think its a lot to ask, but what do I know. I value you stopping by and checking out the video, maybe a sub to, just explaining why things are the way they are.
Awesome well explained tutorial. In need of some advice though. I'm gonna be installing a gpu on my pc that has no gpu besides the integrated graphics (5700g). Do I still need to follow the ddu install step? And prevent windows from updating while in safe mode? Or can I not install ddu and not be in safe mode and proceed like normal. Sorry I'm new to this. Any advice would be greatly appreciated.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Yes, as I stated in this video, its still a driver, I also made this video for the stubborn ones (not saying you are, but you might enjoy it th-cam.com/users/shortsqbKrePI6rvM) always a pleasures my friend,
I followed your tutorial and my install worked out fine . Only had one minor issue. My Bluetooth stopped working. After a Google search it was a quick fix by holding down the shift key and shutting down the pc. When I stated up again bluetooth was fine again.
@@jaredemmanuelganesan7623 ahhh good stuff my friend and thanks for letting me know how you resolved that too, must have been because we delete audio ,which is part of audio as well
at 10:46 you can see it's a 6+2 but I didn't mention that because it's irrelevant, as long as it is 8 Pins, an 8Pin PCIE or a or a 6+2Pin PCIE it will work.
Thank you my friend, so very happy you enjoyed this video and the others, make sure to subscribe and click on the bell notification so you know when the next video comes out.
@@ThisBytesForYou I already sub and turned on notif from the first vid I watched..actually what I appreciate is that your vids are very detailed..your explanations clear and in depth..keep it up💯
@@donaicm5254 Thanks my friend, I do appreciate your kind words and I do try to convey as much info as possible. I am excited to record my next video, I just got a new camera so that I can shoot better, clearer videos for you, the quality is AMAZING.
I didn't do any of these since my gtx 760. I always just poped in the new gpu, without an issue, and windows/nvidia did the work. This is obviously not recommended but I had a gtx 960, a gtx 980, and hopefully a 3060 shortly, and I've never had trouble with this. Thanks for the tutorial tho!
most of the time you will not face an issue, but when you install an updated driver, it could cause corruption then cause issues in games and overall windows utilization, then you get a new card and that corruption goes over to the new card, because the card is using those drivers. Then also, uninstallers don't always work well, then when you reinstall, many times the driver will not overwrite the file, so you have several different files for different driver versions which causes tons of issues. Very happy its worked for you as it is. You may notice a performance increase using this method though. And always happy to help.
@@ThisBytesForYou Okay, thank you very much, I learned something today! When I will have my new gpu I will definitely do this, maybe reinstall cpu drivers too, or whole windows, since I upgraded my whole pc. Thanks for the video again!
If the card screw holes arent matching with the case screw holes (like in this video), is it "safer" to push the card towards the left, push the case in towards the right to match them up, or slightly lift the motherboard from the right???? Thanks!
it is highly recommended because during regular windows mode, windows is using those drivers, so its hard for the OS to let go of some of those files, which is why and how a lot of issues occur. It can't remove them while be used, and can't install over them either while being used so you end up using several different driver version, because you didn't want to restart your system and use DDU to save a few seconds.
@@ThisBytesForYou one thing more brother i have asus tuff b365 plus gaming board and rx 570 4gb as existing gpu. I wana install rtx 3060 12gb, so should i uncheck all options under amd drivers tabs just as u did in video 5:37 or not?
@@ThisBytesForYou actually bro um bit confused that whether should i uncheck those 3 options under AMD specific options Or not because here u mentioned that u have amd chipsets hence u dont wana remove them. So um not sure about my mobo that whether it has amd or intel chipsets and should i uncheck these options or not. Ive also mentioned my motherboard name in my previous reply. Sorry for asking too much bro
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
haha, so very happy you enjoyed it my friend, just made another video card install video coming out Monday, I wish I would have seen this comment, I would have used something like it hahah.
no problem my friend, and that's why I went into the explanation because a lot of people think the same, your not totally wrong, many times that will work but I would prefer it always work, which is why I do it this way. I am sure you have heard about people with newer drivers (it happened not too long ago with NVIDIA, and not too long ago with AMD, and again a while back with NVIDIA) burned out their cards.... I have been doing this since I was 13, before DDU came out and I would follow the same practice, uninstalling drivers, going through the registry, hidden files, user folders, system32, etc DDU just does it all for you and its great.
Please can you help? I'm up to 10:40 but my old graphics card (1050ti) didn't have a PCI-E connected. I have taken the panel off the other side, accessing the PSU and cables on the bottom and have located a 6+2 Pin (PCI) cable. Do I just need to buy a 8 pin (PCI-E) cable that attaches to this?
@@ThisBytesForYou thank you, I'm new to all this. My PC was pre-built and I didn't realise it had more length to it. It also has two ends to it and is called an "express" cable. Should it connect to the first point or the last? Or does it not matter?
Hello Im doing a fresh install for a 3060 in a all Brand new pc I built, do I need to do all this process of removing the drivers? Ryzen 7 with integrated graphics.
No you are not blind, it just does not have lighting, the 3069 series is rgb free. I like rgb but some don't, so it's good for some, not so good for others
I built a computer with an EVGA GeForce RTX 3060 XC Gaming, everything was fine, and when I turned on the computer for the first time I found the graphics card fan was working initially for half a minute and then stopped knowing that I only downloaded Windows 10 pro. My question is, does the graphics card fan work when working on Adobe programs and similar editing programs? Or is there something in the graphics card is damaged? Thank you for your effort and help us.
Are there any extra drivers for video editing that can be installed? I thought I had seen them in the gigabyte page but I don't find them now. Thanks for the video, very helpful!
no, and never download video drivers from any one other than NVIDIA or AMD (of course depending on what card you have). I use the 2080 or the 3090 for video editing and I use the regular gaming drivers and so very happy you enjoyed this video, it means the world to me.
what do you recommend, i need a gpu that will run 2 32 inch 4k just for office work, won’t be doing any gaming at all, would like the cheapest gpu that will work
A 3060 will be great, anything higher would be good too, as long as you are not gaming of course. If you are gaming, you would want a 3080 or a 3090, maybe the 40 series coming up soon.
well you could go with the 3050, but that will drop performance even more, what is more performance today, will be less performance tomorrow, as the PC ages, your components will seem less powerful, so the 3060 is what I would recommend. Custom PC's are not cheap and 4K is not an entry level resolution.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I reply to all my videos. So that I can help, please list the manufacturer and exact model number of the following components: 1. Motherboard 2. CPU 3. RAM 4. Video Card 5. Power supply 6. Monitor. 7. Are you running through HDMI, DP, DVI, VGA, etc? 8. UEFI in the BIOS from Legacy. If it was set to Legacy, you will need to reinstall windows to get correct support.
Hello, sir. I have quick question.... EVGA RTX 3060 XC or MSI RTX 3060 GAMING X please help me i want to buy but confuse about this two which is better???
I go over this in the video, but no you don't, if you like to have potential issues, if you want the best performance and least amount of issues, you DDU
Très content que ça t'ait plu mon ami. Always a pleasure. Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I haven’t got those cables you attached to the graphic card inside computer box (pc is quite old tho) is it still going to run ? Got the answer scrolling down through comments. Gonna order new power supply. Thanks
impossible for me to tell you, since I have no information on your machine. So that I can help, please list the manufacturer and exact model number of the following components: 1. Motherboard 2. CPU 3. RAM 4. Video Card 5. Power supply 6. Monitor.
PLease, reply to the comment, I don't get notifications on an edit, I just look through my comments. If you could though... before you spend money on a power supply, when you are not sure, answer the previous comment so I can help you.
OK, so your motherboard does have UEFI, which is required for this card to work, though the last published BIOS was 2013, running off of the H61 chipset, it will work, and thankfully you have 16gigs of RAM though the cpu might slightly bottleneck the video card, though it will still work.
Hi. I have the card, the fans start but it will not engage the HDMI? I was wondering if my motherboard is too old. It was made in 2014. Manufacturer Intel Corporation Model DZ77BH-55K Version AAG39008-400 Is there a way to check this? Thanks for the video, I followed it exactly.
yes it is, but I highly recommend flashing the BIOS to the latest version and setting your PCIE to PCIE Gen3. Make sure you have a 550Watt power supply with an 8Pin PCIE connection and make sure you are using it. Also, if you can get it to work, this video will help you flashing the firmware which fixes an issue where either DP or HDMI doesn't work: th-cam.com/video/uO351_LhGh8/w-d-xo.html, let me know if this helps.
@@ThisBytesForYou thanks. Will do all that. I have aGTX970 with an i7 and 16 gigs ram. Works great so I think you are right, just need to tweak a few things.
Hey, it worked!!!!!!! I just did a BOIS flash and it worked. I was all set to return it and cry. I got it for a Oculus 2 VR on Skyrim. Now to disappear into that world. Do you have some settings for Afterburner? I heard RTX 3060 almost matches RTX 3060 Ti when boosted.
@@JhampaShaneman Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. I hope you have some fun.
I'm building my first ever gaming pc and I'm so excited! (I'm currently using a gt 730 lol) I was able to get this same card, so thank you for the upload! My question is, does everything in this video apply to a completely newly built setup (other than switching cards)?
wow, congrats my friend, that's a HUGE leap to a 3060, I hope you have a sufficient power supply for it, its a huge leap in so many ways. To a new build yes, but you might also want to check this out; th-cam.com/video/8JuC_Dpm6-c/w-d-xo.html
@@ThisBytesForYou thank you! Honestly, it's a dream come true for me. I'm gonna get a 750W PSU (Corsair CX750M), so that should be enough. I'm still very excited, too bad I'm short on money, because this way I'm limited to buying one component/month... but I'm getting there! lol Thank you for the kind words and the link, I'll be sure to check the video out before I start building!
Ha Ha, that's quite a coincidence. I just got notified today for the 3060 so in a few days! I had to reuse my Asus GT730 in my new build temporarily whilst "waiting" Even the GT730 performed better on my new build with a new Samsung 32/SR75 UHD monitor, Let's hope were both similarly impressed once installed with all the great tips from ThisBytesForYou!
Hi man, I got an used EVGA RTX 3060 XC but I can’t get it to work on my system. At startup it doesn’t even blink any lights and the fans do not start, no signal is sent to the monitor, nothing. It is not the black edition so I guess some light should be present at startup, right? I have and old Aorus GTX 1060 which is working well so I am starting to think the 3060 might be faulty.
So that I can help, please list the manufacturer and exact model number of the following components: 1. Motherboard - manufacturer and exact model number 2. CPU - manufacturer and exact model number 3. RAM - manufacturer and exact model number 4. Video Card - manufacturer and exact model number 5. Power supply - manufacturer and exact model number 6. Do you have ALL of the PCIE connections plugged in, and not daisy chained or pigtailed, each coming directly from the power supply?
yup, same connector, but it requires more power, but that's good that you have a 650, it only requires 550Watts. Your board should support it, I recommend going up to the latest BIOS available here: us.msi.com/Motherboard/H110M-PRO-VH/support#bios, of course you will to pop in the 1060 for now. After you flash the BIOS, make sure you change the support from Legacy to UEFI, I dont know where in your BIOS that is, BUT if your os is install on an MBR instead of a GPT partition, you will have issues booting into windows. Check out this video, from the :25 mark till 6:35 I show you how to check to see if your OS is installed MBR or GPT then how to change it in the BIOS and in OS. Though, the BIOS would help your situation more, it is preferred to have the BIOS set to UEFI and your OS on a GPT partition. Also, in the BIOS verify that your PCIE slots are set to Gen 3 or 4, maybe it might need auto in order to work, updating the bios would help this as well. Aside from that, it should work, it might be dead, verify it is firmly seated.
✅ Watch Next: Fixing GPU Sag on the EVGA Geforce RTX 3090 FTW3 Ultra Gaming: th-cam.com/video/e3bvlCs27go/w-d-xo.html
✅ Watch Next: Unboxing of the EVGA Geforce RTX 3060 XC Gaming: th-cam.com/video/EiGL5K3DOSQ/w-d-xo.html
In Installing the EVGA Geforce RTX 3060 XC Gaming Graphics Card, we go over step by step how to install the EVGA Geforce RTX 3060 XC Gaming Video Card. This will help starters and pros alike.
🔥 EVGA Geforce RTX 3060 XC Gaming : geni.us/NaQwu
Thank you Boss.
always a pleasure, thank you my friend. Sorry I didn't see your comment before, but I got you now ;)
I already installed my 3060 from a 1050ti i didnt do any of this should i?
@@Azlare9_9 did you listen when I was talking about it?
@@ThisBytesForYou sorry i wasnt really paying attention lmao ima just do this later.
I’m here 4 months after and this helped a lot!! I was lucky enough to pick one of these cards up from micro center
awesome bud, so very happy you enjoyed it and found it beneficial and congrats my friend, slowly but surely supply is coming back, finally haha.
This video helped me to install my 3060 which is the first time I’ve ever installed one on my own!!! Thanks so much dude
awesome my friend, it means so much to me that I could help you and even more that you took a moment out of your day to thank me, it means the world to me.
Just installed a card. This tutorial is going straight into my favorites. Thank you.
awesome bud, so very happy I could help, your comment has made my day.
Big hash up in this b a year ago… can’t hide from me homie …I see all 🤣😂🤣. Yoooooo
@@paulg2100 One of my favorite tutorials on TH-cam. 🤣
@@HashTagHell yea really good channel. I sold my 3080 a year ago when that hurricane hit us here in New Orleans and just bought a 3060 2 days ago (amazingly for only $220 with 2 year warranty!) to hold me till I go for a 3080ti later , so was checking out the vid.
@@paulg2100 It’s really the easiest to follow that I’ve found. That 3060 should definitely hold you over.
I just ordered one of these today! Can't wait to game at more then 10fps with decent graphics. I have a 750ti with a memory problem, so this will be a great upgrade.
Yeah, you will get MUCH better FPS over the 750TI, congrats my friend.
bought it I assume, you can get them at stores, its just hard to find sometimes.
@@ThisBytesForYou I did! It's been doing really well! Since 9 months ago, I been using it in my Optiplex, and just today was able to get the side panel on. I had to use a PCIE extender to be able to plug the gpu in. The front USB plug was in the way, but that fixed it.
Then I had a problem putting the side panel on, due to the 8 pin connector was out too far. So, just today I cut a hole in the door to close it.
I must say though, it runs HOT with the panel on. The 3060 manages to get up to 89C under load. (Which is the max temp limit for this gpu, you can set in MSI Afterburner).
And the cpu temp gets to 90C. It is a i7 3770.
I think the fans are clogged from dust, since it's been 3 inches from the ground with the door open for the last 9 months. I need to take it apart to see though, since the gpu is in there somewhat permanently.
The CPU cooler has also been needing a good cleaning.
This is the most awesome Optiplex I have seen before lol. It has 32gb ddr3, a rtx 3060, and a i7 3770, with a ssd. And with the side panel on, it doens't look like it's worth more then any other cheap old Optiplex.
@daddy devito I went to Microcenter and waited for 9 hours.
@@lockdot2 awesome bud, yeah Microcenter is awesome, but the closest one is 3 hours away from me, I made the drive once, never again, 3 hours there and 3 hours back, I will stick to Amazon and NewEgg haha. Sorry that you have to go through all of that with your system, but here are 2 videos to help you, this video is how to better cool your 3060: th-cam.com/video/uO351_LhGh8/w-d-xo.html and this video is on how to dust your machine, I will be making a new video soon but this will help: th-cam.com/video/YxoFkxO-Rco/w-d-xo.html so very happy you nabbed on my friend.
I like how you zoomed in and took your time; great video, cheers!
Thanks my friend, so very happy you enjoyed it and thank you so much for your kind words and observing the care I take,it means so much to me. Cheers my friend.
This video was exactly what I needed. I’m upgrading to a 3060 from a 1660 and I definitely didn’t want to screw anything up
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Did you uncheck everything for the Nvidia side, like he did for the AMD side? That part confused me. When he talked about AMD chipset, I thought he was talking about the CPU.
So, uncheck all the boxes for an Nvidia install or no? I'm upgrading the exact same... 1660 Super to 3060 Ti
Yes, if you have an AMD CPU, you have an AMD chipset, leave everything amd unchecked, check everything for Nvidia.
@@atswagdid you uncheck everything or have them checked for nvidia
I was able to snag this exact card on launch day and this video was super helpful! Upgraded from a 1660 super
awesome my friend, so very happy for you and make sure to stay tuned and have the bell notification enabled, i have a lot of info on this card coming out.
nice im gonna upgrade from a 1660 super to a 3060 too!
@@tdmhydratzu7694 awesome bud, next week I plan on having 2 more videos at least in this, actually 3
I just upgraded to this card from a 1660 super!
@@SassiTV Nice my friend, I am working on a video now that you might enjoy, trying to get it out for tomorrow on this card and 1 or 2 more videos on it. Please stay tuned
Your videos are extremely useful and very thorough. As a noob pc gamer, having the step by step walk through help tremendously. Saved me during a blank screen when I installed my GPU. Thank you
Awesome my friend, thank you so much for your kind words, It really does make my day, I am so very happy I could help you my friend. Thanks so much for checking out the video, liking and subbing as well as taking a minute out of your day to thank me, it means so much to me. If you feel like you have any friends with issues, please make sure to share this video, it would help so much. Thanks again my friend and please let me know if you have any questions, always happy to help.
I was in my local Kelowna Best Buy this AM, I was shocked to see 3 of these on the shelf. As fast as I looked in that direction ALL three sold. I recommended your awesome video to the purchasers. Your video was invaluable to me on my install, I hope similarly it helped these 3060 purchasers!
wow, that is amazing my friend, it means so much to me that not only you recommended my channel and video, but even more than I could help you, and you took a minute out of your day to let me know I helped you, it means so much to me, thank you so much and it was my honor that I could help you. So, how much do you love this card.
@@ThisBytesForYou As a person who has never built a computer before, your video's were an invaluable step by step how to. I had a perfect build with no errors. I'm sure many people can likewise attribute their success to your concise how to video's. It's greatly appreciated your replies and interactions connect you with your subscribers.
With regards to the card... I like it very much! it's a big step up from my Asus GT730 on my Samsung UHD monitor. The rendering and textures are amazing. Perhaps the one thing I greatly appreciate about your take on this card is the positive reaction to the quality, where as others have reviewed it in disparaging terms, sadly some have nothing good to say about it It fills a very interesting niche, especially for those of us who just needed a GPU (ANY GPU!) I was trying for a 3070 FTW. The RTX3060 came along first and was a compromise and for my needs was more than adequate. I overbuilt and need to learn how to get more out of my system.
Cooler Master H500 RGB case with 3x200mm fans, Asus 590 Wi Fi Pro, Ryzen 5-3600. 500 GB M2 with Master Air MA620M cooler.
32gb HyperX pro RAM. Plus the RTX 3060
So far the temps have been well below 40! and I had to run your fan test to see if mine actually worked. A great thumbs up for what you do here on TH-cam.
@@takata98 Thanks my friend, I really do appreciate it. Sadly, many of us out here like to just bash things, it get's lot of views and comments, but it's not what I am looking for. I would love all the views, but not just because I am talking trash about the product, the product may have flaws, and I feel like i go over them, but in a constructive manner, no need to bash. I take each product I get as a new product, something new to all and put it through its paces, give you what I find, let, my opinions, and let you make the determination if its right for you, or you should skip it, I don't want to think for you, so I really do appreciate it, and the fact that not only you said thank you, which alone means a ton, but you broke down everything I helped you with, why it helped you and you recommended my work to other people, that means so much to me, thank you my friend.
I found the performance great, for it's intended price, as well as thermals. You coming from a GT730, it was like night and day for sure for you my friend, that is a TREMENDOUS upgrade, congrats, but there is nothing wrong with overbuilding, in my opinion. Sure, it might be too much for you today.... but if you bought exactly what you needed today, then tomorrow you have to upgrade and it would cost you so much more, my 2 cents at least. Your build kind of sounds like a mix of my $1,500 build, and my over the top gaming build th-cam.com/video/9gg8w8BHGns/w-d-xo.html let me know what you think, and thanks again so much my friend.
Thanks for this. I wanted to see how to install before the card even arrived. I appreciate the clear information!
always a pleasure my friend, so very happy I could help you and you found this beneficial.
I just ordered the same card and cant wait to install it. I will use your video to help me throughout the process. Thanks a lot
Awesome my friend, so very happy you found this video and I really hope it does help you, I try to cover it all, though of course, I am human, I could have missed something haha. I hope to have the final review of this card coming out on Friday or Monday,... I am sooooooooooo surprised at it, you will be too ;)
Thank you very much for your detailed tutorial! I was happy to find one for the exact graphics card I bought. Now I'm not at all technologically inclined, but using your guide, I was easily able to switch out my Radeon RX 470 to this new one quite easily; only took about 20 min or so. Kudos to you, sir
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thanks for the video! The DDU stuff and the refresh rate setting for the monitor was super nice to know!
I just got my 3060 XC Gaming today in the mail, and was looking for something comprehensive to finally upgrade my gpu! Thanks to EVGA's relatively short wait list for the 3060, which was awesome 😅.
Upgrading from an old R9 280 that I'll be giving to a friend, their graphics card caught fire a few weeks ago and they definitely need anything they can get
AWesome my friend, so very happy you enjoyed this video and so happy that you got a 3060, such a nice card. Ouch, catching fire is rough, that is very nice of you to give them that 280, its an older card but it still does a great job today.
Thanks! I used this the whole time whole installing my 1660 super to a 3060! If y’all follow his steps you should have no problem! Great video
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
bro you are a goat I’ve referred to you a handful of times through this build im doing, you deserve a sub
awesome my friend, thank you so much for your kind words and support, it means the world to me. Mind if I ask, who referred you to us?
I upgraded from a Nvidia 310 gpu to my Evga 3060 XC, so I definitely needed to see this. You also helped me setup my brand new pc too before!!!
awesome my friend, so happy to have you back and hopefully you got this too.
Wow! This was such a big help. Words cannot describe. Thank you for your clear step by step tutorial. The way you explained everything was perfect. God Bless!🙌🙏
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thank you for making this. Even tho i already had my old graphics card out and the new one in by the time i seen the video, the setup along this video worked seamlessly for me. Thanks
Awesome my friend so very happy I could help you and you enjoyed the video, it means the world to me.
This was very thorough and helpful - better than another one I just watched.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I just found your channel and really like your style of promoting the products.
Thanks, but I am reviewing, not promoting
Thank you so much, dude. It was really helpful for me. I cleaned all the old drivers and files from my MSI Armor RX 570. I did a great jump buying this card. I'll see your others 3060 xc videos to configure It well. Cheers from Argentina!! 🇦🇷
awesome my friend, so very happy you enjoyed this video, and I am sooooo happy it worked out for you. I will have to say, when you go from NVIDIA to AMD and Vise Versa, your enter system will be a little slower in many things. I always recommend a clean install of windows, If you like, in this video I show you how to make a windows 10 thumb drive: th-cam.com/video/C759I7DBXd8/w-d-xo.html, then in this video, I show you how to install windows 10: th-cam.com/video/sNtlz1EoWBM/w-d-xo.html and then in this video I show you what to do after you install windows: th-cam.com/video/8JuC_Dpm6-c/w-d-xo.html. A clean install alone always makes your system perform better, but a clean install after an update helps too, just my recommendation. And cheers my friend, I have some family that lives in Argentina, I am Cuban myself, I would love to go sometime,... just so hard to actually go hahah, I hope you are doing well ;)
Went from a GTX 950 to this same card this was very helpful. Super excited to play my games at max settings Thank You!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. From a 950 to a 3060 XC thats a tremendous upgrade, good stuff bud
Just got mine from a freaking legend ! it’s in the mail, I’m super exited
what do you mean you got yours from a freaking legend?
@@ThisBytesForYou I met a guy over Reddit, he’s been periodically sending me parts for no cost, the legend sent me a 3060! (this exact model), he sent me a motherboard, ram, cpu cooler, fans, power supply, basically upgraded my crap budget pc to something a bit more modern.
@@Yotes_ wow, at no cost, that is amazing, good stuff my friend
Just ordered one these, should be getting it by tuesday. I'm so excited!
Awesome my friend, congrats. Where did you find one?
@@ThisBytesForYou At a local store over here in my country, they had it at a decent price 👌
@@hl993_ that's awesome my friend, I am so very happy for you, I hope this video helps you get it in as well, and if you have any questions, please let me know.
Installed the exact same card using your video. Thanks man
Awesome my friend, so very happy I could help you. If you are not already, please do consider liking the video and subscribing, it would help a ton. Also, I come out with videos weekly to help you in all sorts of PC related issues and solutions. I am sure I will have more for you, if I don't already have it now in our large library of videos. Thanks again.
Thanks for the small details. Helped alot.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Picking up my 3060 today upgrading from a rx580 thanks for the video!
Awesome my friend , so very happy you were able to snag one. Where did you find one, and great upgrade ;)
@@ThisBytesForYou I went to memory express I dont know if there in America or not but i got a back order yesterday and it came today!
awesome bud, I havent heard of memory express but it's awesome that you got one and got a card. So very happy for you and please do let me know if you have any questions on it.
@@scuzz349 I also got my 3060 yesterday from memoryexpress. I got the Asus Tuff edition. Had it pre ordered about 2 weeks.
awesome stuff my friend, congrats.
Thanks so much for video. Just upgraded from 1060 3gb to 3060
Awesome my friend, so very happy I could help you. If you are not already, please do consider liking the video and subscribing, it would help a ton. Also, I come out with videos weekly to help you in all sorts of PC related issues and solutions. I am sure I will have more for you, if I don't already have it now in our large library of videos. Thanks again and thats a NICE upgrade dude, congrats.
i'm working on my first build and had no clue how to install a brand new geoforce rtx 3060 graphics card so I found your video and after watching it twice I successfully installed it. It will probably take me a couple more days to finish the build. I understand that when it comes to installing/updating drivers I should go to Nvidia. Thanks so much!
Always a pleasure my friend, I am so very happy I could help you. I release videos like this showing you how to upgrade, build and wire computers and a everything on PC's, new ones every week. If you like these types of videos, please make sure to subscribe. Thanks my friend and again, i am so very happy I could help you.
I have been watching your vids for a little while now, and realized I never subbed. Why? I dont know- but after reading your interaction with the people you have helped, and the genuine care that you expel when making these vids and/or replying to your subs made me run to the subscribe button. You are the type of person that deserves the subs. Thank you for all you do man, you're amazing!
well thank you so much my friend, I truly appreciate your kind words and support, it means a ton to me. I came from a time before the internet, hahah where I had people in my family that knew tons about computers, professors even, but no one had time for me, and the internet didn't exist, only BBS' and you had to know someones phone number to connect to their node and hope they had what you wanted.... it was rough. So, I learned everything on my own, everything, and it was expensive and I broke a lot. So years later, TH-cam came out, and people were showing similar, but they would skip over a lot of important stuff and speak techno babble, which would scare off people so I decided to make easy to follow guides, trying not to skip anything and it seems to be paying off, slowly, but its working it seems, I am helping many people and it feels good.
I really do appreciate your kind words my friend, it is very heard warming and I hope I have helped you too.
@@ThisBytesForYou You and me both brother. I'm not ancient, but I'm not young either- I have four kids of my own, and now being in my mid 30's, I remember playing doom on windows pre-96- It was an absolute learning experience!! It's amazing to see someone with the passion you have for helping others in their endeavors technically. It's a lost trait anymore. Your dedication and true passion will shine through. It may take a little longer than the guys throwing out bs and clickbait, but as for myself, I'd much rather it take longer with me knowing my subs are actually there for me and my honesty versus being a 1 trick pony getting 1mil views over night for something that's inaccurate or "powdered" to cater to others pre-determined thoughts. You're doing it right and have my support 110%.
wow, thanks my friend, today is an amazing day indeed, your kind words kinda brought me to tear, going through some things right now and then just a few seconds ago 1 person just gave me a super chat on 1 video and then another super chat on another video, its an amazing day for sure my friend, I am incredibly humbled by you first (since you commented first) and this other person, I am really at a loss for words. Thanks again my friend.
@@ThisBytesForYou Keep your head up brother. Whatever it is that you're going through is just a minor speed bump on the road of Life. You'll overcome it! Thanks again!
@@bootenooties99 well, its a major speed bump sadly, but I have no choice but to just keep trucking, it's what I do, thanks again brother, I really do appreciate it
Such a lovely and detailed explanation sir, thank you so much.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
So I substantially followed the guide, with a few changes, and am up and running fine with the new card. It's striking how much smaller RTX 3060 ti xc is compared to my old RTX 2060.
Running Windows 10 Pro, 22H2 on Ryzen 7, 3800x.
Despite all the Debby Downer on the 3060 ti from a lot of quarters it was the right choice/price for a mid-life graphics card change on a 4 year old computer - that still does a good job on the games I play and functions I need. As Ellsworth in Deadwood: "Experience hard come by, but thoroughly learnt" on making sure graphics card is matched to motherboard. Killed my old Sandy Bridge-E motherboard during Covid after going from 2 to 6 gig with gpu change, then playing games that were it turned out at the edge of the system's abilities.
My slight changes:
1. The PIN worked fine dealing with "Safe Mode".
2. To get to Safe Mode, I went Start - Settings - Update & Security - Advanced Start up Options.
3. This brought up Troubleshoot, clicked on that, then Advanced Options, Startup Settings, then clicked restart, once the machine started up, picked and pressed F4 for "Enable Safe Mode".
4. That brought up "Enter PIN", entered it and was operating in Safe Mode.
In the DDU first time dialog, to be safe, I unchecked the INTEL Specific Options box also. Rest of it per video: unchecked the AMD Specific Options, and the Windows picks drivers prevention at the bottom.
Used the swap as opportunity use my new hand vacuum/blower to blow and vacuum clean inside, the little PeroBuno $70 one on Amazon. Quite worth it.
awesome bud, happy I could help, The 3060, be it the TI or non TI are great cards, for sure. As for the changes, its understandable, this is a 3 year old video, so a change for sure is unavoidable, glad you were able to get it, as for the PIN, that's nice. It used to be that even though the pin allowed you to get into windows, it didn't in Safe mode, then caused others issues when trying to get back into regular windows mode, glad MS finally fixed that. NIce about the PeroBuno, I use the Xpower, I have had it for years and it still works great, if you want to check out the video: th-cam.com/video/YxoFkxO-Rco/w-d-xo.html
So what did you think about the PerBuno, is it powerful and do the batteries drain quick? You mention its a vacuum too, the Xpower is just a blower, does it vaccum well?
@@ThisBytesForYou PeroBuno can vacuum and blow. 3 speeds. Vacuum didn't get as much as I wanted on the CPU, but the blower served the purpose. Very good attachments I think. Battery life can't tell on, but it's easy to charge. When I went to Windows 10 about a year before Windows 7 support ended, the PIN was enforced on me, even though I had a password. Seems like it superseded the password function at least in my case.
I used it today, when I changed a cpu, it had me redo my pin, so it does look like they are putting more behind it, thats good
Going to start out with this gpu (normally I just rely on the one on the mobo) and got a good deal on a new one. Still hasn't arrived, but enjoy your videos and very helpful.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Please make sure that you have at least a 550Watt Power supply and 1 available 8Pin PCIE connection as this needs external power directly from the power supply. So what will you be using this for if you don't mind me asking?
Just wanted to say thank you for the video! It helped me while swapping out my rx580 for a FE 3070!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. 580 to a 3070, that's an AMAZING upgrade, congrats. You may not have noticed a big difference in games, that's because you may need to uninstall the games, maybe the clients, then reinstall them.
great walkthrough…i ran home and tried installing it immediately and wondered why it didn’t turn on😂😂😂 then i found this helpful video
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Very good video followed everything he said ..thanks ...and this was my first time going from 570x to 3060....
awesome my friend ,so very happy I could help you my friend and I am so very happy you found this video beneficial.
Your videos are honestly really great and detailed. I think i'm gonna buy this one and then come back to this video~
awesome my friend, thank you so much for your kind words and support, it means the world to me. It is a nice card for sure, stock is insane at the moment sadly. Goodluck my friend, and please do let me know if you have any questions. Also, if you want to stay up to date with all my videos, please do remember to like and sub, it would also help a ton.
Thank you!!! I was having some troubles with the installation but with this you solved all my doubts. Thanks again ❤❤
always a pleasure my friend, I am so very happy I could help you. I come out with videos like this helping you every week, if you like videos like this, please make sure to subscribe. Thanks again.
Appreciate the warning about static and then about the little clip. Definitely might have forgotten. GPU prices for this card have finally gone down to what I consider acceptable, so I purchased one. Been stuck with a 1050 ti for nearly 5 years.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Being that the prices have dropped and a new generation is coming this year, would you think maybe you could go up to a 70 series, that way you can get a little extra life out of your video card?
@@ThisBytesForYou Was a bit out of my budget. I'm sure the 3060 will get me at least 2 years.
@@mfvicli 2 years, yeah I think you will be good.
Brilliant vid I am defo saving this for when I get a rtx 3060 in a couple months
It is a great card for sure, there are better, but they cost a lot more, also, NVIDIA will be announcing new cards today, so lets see what happens.
Nice one. Waiting for the Benchmarks..
Thanks bud, coming soon, working on a lot for it
I had driver’s problems on my 3060, this helped thanks very much !!!
Awesome my friend, I am so very happy I could help you. If you don't mind me asking, which part of it do you feel helped you the most?
@@ThisBytesForYou uninstalling old drivers/ window drivers and downloading new drivers
Cool
@@Cyclonetempo3725 haven't heard back form you in a while... I hope all is going well.
Dude, this video helped me out so much. Your explanation is on point...left a thumps up and a subscribed to your channel.
Thank you so much for your kind words and support my friend, it means the world to me and I am so very happy I could help you.
Love this guy. Awesome video . Keep up the dope work
Thanks so much my friend, so very happy you enjoyed it and happy I could help.
Awesome video man, appreciate the work that went into this🙌
you are so very welcome my friend, so very happy i could help you. I have a ton I am working on, one kind of like this for the 6700 tomorrow as well, always on something. Thanks so much for your support, and make to sure to subscribe and click on the bell motivation icon so you know when my next video comes out. Monday's video is a little different, but who knows.
As always great and informative video my friend!
Thanks so much my friend, I truly appreciate it
Can i just say most ppl dont take the time to ddu drivers in there vids and just do brand new copy of windows so its realy good that u did it thank you👍
always a pleasure my friend, everything I do on my own machine, I do here, to show you because this is my machine, so I take great care in this, so very happy you enjoyed it.
Tutorial was worth every min of my time very explanatory and helpful thanks
Awesome my friend, I am so very happy you enjoyed it and found it beneficial, it means the world to me.
No problem thanks again
always a pleasure my friend :D
For 0:00 - 6:20 we don’t have to do this if we are not replacing the gpu for a new one right because I am just installing the gpu for the first time
yes, I do recommend it as windows still has drivers built into it, older drivers, that have issues, its why they make newer drivers. The installer for the newer drivers does not do a great job at removing them, this will help.
Thanks so much for this. I buy my PC's from Digital Storm and the DP connections on the AMD card broke. Digital sent me a replacement card - an NVIDIA Geforce RTX 1030 TI. I'm handy but have never ventured inside the case except to blow out dust. Anyway - while there are a few difference with each MB and card, your video was a great help for this noobie.
awesome my friend, thanks so much for stopping and checking out my video and commenting, but even more for commenting so detailed, taking a minute out of your day to thank me, it means the world to me, I am so happy I could help you. If you have never done it, it is scary, but I try to help everyone and give everyone confidence to do things like this, all the way up to building an entire pc, instead of having to pay someone for the simplest of tasks, sometimes it costs more than the component itself. Thank you my friend ;)
Great video! I use DDU also. Works very well at removing remnants of old display drivers.
Thanks bud, I do appreciate it. Yeah, DDU is amazing. Sucks, I uploaded this video last night at around 9PM, and the HD version is still processing, you probably saw it in SD
As far as I know, GeForce experience will automatically delete your old drivers and replace them. On first boot with the new GPU it will run off the Universal Windows drivers, then just run Geforce experience and it will take care of the rest. Thanks for making the videos on these cards, they are starting to hit the real market a bit. I got one today through EVGA's auto notify system.
Yup, I go over this in the video. It will delete the drives, what it can but its like you performing your own surgery, its hard to get everything a 3rd party doesn't care, it just focus' on what it needs to, never had an issue with it, but of course you can use which ever method you prefer. Congrats on getting the card, let me know what you think.
@@ThisBytesForYou Ah gotcha! I now understand your point in the video about having 2 options, good to use both to make 100% sure you don't have any driver conflictions. And I will! Upgrading from a 1650 Super, should be a major difference!
@@rxfaction9736 yeah for sure, oh and upgrading from a 1650, thats a nice upgrade, please do let me know how it goes, what resolution will you be playing at?
@@ThisBytesForYou Currently 2560x1080, I hit the silicon lottery on my 1650 super (Near 2Ghz constant clock speed), runs most my games medium settings at 75fps on that LG Ultrawide. I've been wanting to jump to 3440x1440, hopefully I'll be able to do that now!
@@rxfaction9736 well, this really isn't meant for 4K, even though thats not really 4K, kind of a hybrid... hmmm, it might actually work well, lt me know how that goes. What is the refresh rate of your monitor and does it have freesync/gsync?
If the computer I bought came with integrated graphics and no graphics card do I still need to delete drivers?
I cover it in the video, but this might help: th-cam.com/users/shortsqbKrePI6rvM
Thanks Buddy! Helped me a lot!
awesome my friend, so very happy I could help you.
Just got myself an EVGA RTX 3060 ti XC, upgrading from a sapphire pulse RX 56
VERY nice upgrade my friend
Just got a 3060ti XC from tonight's drop! After 3 months of searching! Will certainly use this video to install it. Do you recommend buying a wrist band to ground yourself or can I just do what you did?
Awesome bud, so happy you can finally get one, it was rough getting this one too, it's crazy. As for the band, you can but I don't like to, I mention it in the video as well, you are good just follow how I show you in the video how to ground yourself
Thanks for vid! You saved my time and my GPU)
awesome my friend, I am so very happy I could help you, it means the world to me and you are so very welcome.
This video is very informative! Helpful indeed! Thank you, Imma subscribe to this channel!!
awesome my friend, thanks so much for your kind words and your support, it means the world to me and I am so very happy i could help you.
Thx buddy, seriously, keep up the good work man!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou i own the Geforce RTX 3050 but i am not a gamer but a big fan of movies, i know if i'm buying the 3060 RTX, that's not making any difference in the graphics but i'm crazy and money's burn my hands, i really need to change it to 3060, thx for you fast response :)
hahah anytime bud, always happy to help... but new cards are coming out in less than 2 weeks, so maybe hold it just a little?
@@ThisBytesForYou yeah, the 4000 series :) in November (around)
My computer store told me the same thing man, wait the 4000 series but i got 2 works, no girlfriend, no house, no cars, this is only things i have to have fun when i'm not working, i think i'm gonna buying the 3060 tomorrow and a new graphic card in late 2023 with my computer store in my city :)
This video is super helpful, thanks for taking the time to do it! I did have two questions - I am about to install an my Geforce RTX 3060 by Aorus. I only had a integrated GPU and not an original video card - do I still need to uninstall drivers first? And secondly, my card has an 8 pin and a 6 pin connection - are those for two separate cables or a single cable that has the pig tail with two ends on one side?
Thanks again and extra thanks if you find time to answer these!
yes 2 both, I go over it in the video
@@ThisBytesForYou Ah okay, I must've missed it, I'll watch back through a couple more times, thanks again!
@@joshbruins1861 actually, i missed the Aorus part, this one only had 1 connection, yours has 2, so yes, they would be 2 separate cables, do not use daisy chained cables.
I plan on upgrading my GTX 1060 to the RTX 3060. This tutorial looks pretty simple. Would I need to get a new power supply for this or would I be fine?
Well, do you know the model number and manufacturer of your power supply?
@@ThisBytesForYou I don't have the model number sadly. According to the booklet I got with it (pre-built), its an Apevia 600W gold 80+ power supply.
I can't help you if you don't help me, you have the PC in front of you, I don't but the video card requires 550Watts, wattage wise it will support it but since I have no idea what it is.... I can't tell you if you have the cables.
Dude you seem like a great guy! 👍
Thanks so much my friend, some might tell you differently, I kind of have a short fuse but I am trying sooooooooooooooo hard to fix that, I really do appreciate your kind words.
@@ThisBytesForYou have a nice day my guy
@@Justakoolman thank you so much my friend, I hope you have a great one too.
Great tutorial. Got me out of a no signal situation.
awesome bud, so very happy I could help you.
Does this card just require an 8 pin slot thingy to run? Or does it require more?
have you watched the video?
I just bought my 3060 today for a new computer build. In the mean time, can I replace my 1060 with my 3060 in my current computer? Or should I just wait for when I get all the new parts for my new build
meh, go ahead and use the 3060 on your old computer for now, when the time comes move it over, no reason to have it just sitting there, have fun with it.
Did you ever need nvidia’s new PCI-E shaped cable adapter? Or is it ok to just plug any PCI-E cable in as long as it fits? Just asking because I just got a 3060 OC and I wanted to make sure 🙏🏼 thank you for the video
No, that is only needed for the founders edition cards. You can use any 8 pin connection, just make sure all the pcie connections are coming straight from your power supply, you cannot pig tail the connections. Also, thanks so much for your kind words, it means the world to me and I am so happy I could help.
Thanks man really help me !
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
hey man, thanks for the detailed explanation. my question is if you install this GPU for the first time, do you still need DDU downloaded or no?
Just do it, it's not that difficult
@@ThisBytesForYou sorry i meant a clean first time GPU install on a freshly build computer
I got what you mean, but your display drivers come in sharp because Microsoft installs what they call, the best drivers because they are WHQL, but usually they are very old, don't perform as well and can have issues, even if they are WHQL, I recommend you do it all the time.
@@ThisBytesForYou i see! thanks for clearing that up, boss! love from a new subscriber from indonesia 🙏🏼
always a pleasure my friend, and thank you so much for your support, it means the world to me.
You deserve a subscribe! Thank you mr!
always a pleasure my friend, so very happy you enjoyed this video and i do appreciate your support.
Thanks man really helpful video, no need for so many adverts though!
always a pleasure my friend, but then will you be sending me payments for my time and being away from my family or should I do it a different way?
Then also, you are not paying a technician $100+ dollars to install the card, I am giving you the knowledge to do that, so yeah, the need is kind of there.
I didn't mean any offence. Thanks again for your service 👊🏻
no offense taken at all my friend, but understand, while I would love to do everything for free, because I really do love doing what I do, this all takes up time, time away from my family or doing anything I want to do, so I come home from a long day in the office, then work some more at night, then all weekend. My time is valuable if not to me, then to my family and someones got to pay for it, since its not you, the ads pay for it.
Then you are saving money by not paying someone to do it, and you have to watch a few ads, most of which you can skip, I don't think its a lot to ask, but what do I know. I value you stopping by and checking out the video, maybe a sub to, just explaining why things are the way they are.
Awesome well explained tutorial. In need of some advice though. I'm gonna be installing a gpu on my pc that has no gpu besides the integrated graphics (5700g). Do I still need to follow the ddu install step? And prevent windows from updating while in safe mode? Or can I not install ddu and not be in safe mode and proceed like normal. Sorry I'm new to this. Any advice would be greatly appreciated.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Yes, as I stated in this video, its still a driver, I also made this video for the stubborn ones (not saying you are, but you might enjoy it th-cam.com/users/shortsqbKrePI6rvM) always a pleasures my friend,
@@ThisBytesForYou my mind is at ease now lol thanks for your pearls of wisdom. Gonna approach my install more strategically now. Have a blessed day!
@@jaredemmanuelganesan7623 always a pleasure my friend, you have a blessed day as well and thank you
I followed your tutorial and my install worked out fine . Only had one minor issue. My Bluetooth stopped working. After a Google search it was a quick fix by holding down the shift key and shutting down the pc. When I stated up again bluetooth was fine again.
@@jaredemmanuelganesan7623 ahhh good stuff my friend and thanks for letting me know how you resolved that too, must have been because we delete audio ,which is part of audio as well
was that a 6+2 pin you connected to the card? it looked like it was, you didn't mention that
at 10:46 you can see it's a 6+2 but I didn't mention that because it's irrelevant, as long as it is 8 Pins, an 8Pin PCIE or a or a 6+2Pin PCIE it will work.
Dude you have great contents...✌very helpful been watching your recent vids
Thank you my friend, so very happy you enjoyed this video and the others, make sure to subscribe and click on the bell notification so you know when the next video comes out.
@@ThisBytesForYou I already sub and turned on notif from the first vid I watched..actually what I appreciate is that your vids are very detailed..your explanations clear and in depth..keep it up💯
@@donaicm5254 Thanks my friend, I do appreciate your kind words and I do try to convey as much info as possible. I am excited to record my next video, I just got a new camera so that I can shoot better, clearer videos for you, the quality is AMAZING.
@@ThisBytesForYou I'll be waiting for it.is it based on the Rtx3060?
yes it sure is on the 3060, I had to record it twice, I had issues with the first video
I didn't do any of these since my gtx 760. I always just poped in the new gpu, without an issue, and windows/nvidia did the work. This is obviously not recommended but I had a gtx 960, a gtx 980, and hopefully a 3060 shortly, and I've never had trouble with this. Thanks for the tutorial tho!
most of the time you will not face an issue, but when you install an updated driver, it could cause corruption then cause issues in games and overall windows utilization, then you get a new card and that corruption goes over to the new card, because the card is using those drivers. Then also, uninstallers don't always work well, then when you reinstall, many times the driver will not overwrite the file, so you have several different files for different driver versions which causes tons of issues. Very happy its worked for you as it is. You may notice a performance increase using this method though. And always happy to help.
@@ThisBytesForYou Okay, thank you very much, I learned something today! When I will have my new gpu I will definitely do this, maybe reinstall cpu drivers too, or whole windows, since I upgraded my whole pc. Thanks for the video again!
always a pleasure my friend, maybe this video would help you too: th-cam.com/video/8JuC_Dpm6-c/w-d-xo.html
If the card screw holes arent matching with the case screw holes (like in this video), is it "safer" to push the card towards the left, push the case in towards the right to match them up, or slightly lift the motherboard from the right???? Thanks!
Do like I show you here, you have to push the card towards the back, it happens sometimes
Thanks bro. One thing i wana ask is it necessary to enter safe mood to start DDU? Can we start it in normal window mood?
it is highly recommended because during regular windows mode, windows is using those drivers, so its hard for the OS to let go of some of those files, which is why and how a lot of issues occur. It can't remove them while be used, and can't install over them either while being used so you end up using several different driver version, because you didn't want to restart your system and use DDU to save a few seconds.
@@ThisBytesForYou Thanku so much bro you have explained in much better way ❤️
@@ThisBytesForYou one thing more brother i have asus tuff b365 plus gaming board and rx 570 4gb as existing gpu. I wana install rtx 3060 12gb, so should i uncheck all options under amd drivers tabs just as u did in video 5:37 or not?
I tell you exactly what you should do there, not sure what question you have about it?
@@ThisBytesForYou actually bro um bit confused that whether should i uncheck those 3 options under AMD specific options Or not because here u mentioned that u have amd chipsets hence u dont wana remove them. So um not sure about my mobo that whether it has amd or intel chipsets and should i uncheck these options or not. Ive also mentioned my motherboard name in my previous reply. Sorry for asking too much bro
Thanks for the video. You save me
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thanks bro, my rtx 3060 if finally coming after using the evga auto notify, it'll be here soon, I'm super excited
ahhh that is awesome news my friend, so very happy you got it and I hope this video helps you as well to get it installed and get to some gaming
@@ThisBytesForYou Tysmm, also can you do a video on how to enable dlss and resizable bar support on a 3060?
@@shahzadkhosravi195 always a pleasure my friend, very happy I could help, so you want a video like this ;) th-cam.com/video/sgrvscvnCCw/w-d-xo.html
@@ThisBytesForYou thats great thank you
always a pleasure my friend
"that's like me trying to cut my own hair... if I had hair."
That cracked me up, you get a like just for that 🤣
haha, so very happy you enjoyed it my friend, just made another video card install video coming out Monday, I wish I would have seen this comment, I would have used something like it hahah.
Nice explanation, but I believe that if you already have an Nvidia card it is not necessary to ddu the drivers when installing another Nvidia card.
It can very very relevant, older drivers can cause issues, it's why they make newer drivers, to fix old issues and bring about better performance.
also, if you bought a new card, that just came out, those older nvidia drivers wont know what it is, so yes, very necessary
@@ThisBytesForYou Thanks for correcting my information.
no problem my friend, and that's why I went into the explanation because a lot of people think the same, your not totally wrong, many times that will work but I would prefer it always work, which is why I do it this way. I am sure you have heard about people with newer drivers (it happened not too long ago with NVIDIA, and not too long ago with AMD, and again a while back with NVIDIA) burned out their cards.... I have been doing this since I was 13, before DDU came out and I would follow the same practice, uninstalling drivers, going through the registry, hidden files, user folders, system32, etc DDU just does it all for you and its great.
Please can you help?
I'm up to 10:40 but my old graphics card (1050ti) didn't have a PCI-E connected.
I have taken the panel off the other side, accessing the PSU and cables on the bottom and have located a 6+2 Pin (PCI) cable. Do I just need to buy a 8 pin (PCI-E) cable that attaches to this?
A 6+2Pin cable is an 8Pin, so you are good my friend, just make sure you have at least a 550 Watt power supply
@@ThisBytesForYou thank you, I'm new to all this. My PC was pre-built and I didn't realise it had more length to it.
It also has two ends to it and is called an "express" cable. Should it connect to the first point or the last? Or does it not matter?
@@KodieCollingsGaming what do you mean first or second, it should only have 1 are you using this card?
@@ThisBytesForYou yep I have the EVGA 3060. The cable has two connections that are linked. Sorry hard to explain it.
Yes connect both, to make 8 pins.
when you use ddu for nvidia cards, do you uncheck those marks like with the amd card??
I go through everything with you in this video, as for AMD, for what chipset are you using, or what processor are you using?
Hello Im doing a fresh install for a 3060 in a all Brand new pc I built, do I need to do all this process of removing the drivers? Ryzen 7 with integrated graphics.
you need to watch this video: th-cam.com/users/shortsqbKrePI6rvM
I already had my 3060 installed while following these steps and cleaned my new gpu! Is there anything I need to do from here?
Ummm, did you watch the video?
Does it have any lights on it? I know that’s a dumb and insignificant question to ask .. but just curious. Thank you!
Check out the video, it will show you.
@@ThisBytesForYou I must be blind because I can’t tell!! I’m so embarrassed! 🙈
No you are not blind, it just does not have lighting, the 3069 series is rgb free. I like rgb but some don't, so it's good for some, not so good for others
I built a computer with an EVGA GeForce RTX 3060 XC Gaming, everything was fine, and when I turned on the computer for the first time I found the graphics card fan was working initially for half a minute and then stopped knowing that I only downloaded Windows 10 pro. My question is, does the graphics card fan work when working on Adobe programs and similar editing programs?
Or is there something in the graphics card is damaged? Thank you for your effort and help us.
this video will answer your question, but yes, it is by design and always a pleasure my friend: th-cam.com/video/uO351_LhGh8/w-d-xo.html
Are there any extra drivers for video editing that can be installed? I thought I had seen them in the gigabyte page but I don't find them now. Thanks for the video, very helpful!
no, and never download video drivers from any one other than NVIDIA or AMD (of course depending on what card you have). I use the 2080 or the 3090 for video editing and I use the regular gaming drivers and so very happy you enjoyed this video, it means the world to me.
what do you recommend, i need a gpu that will run 2 32 inch 4k just for office work, won’t be doing any gaming at all, would like the cheapest gpu that will work
A 3060 will be great, anything higher would be good too, as long as you are not gaming of course. If you are gaming, you would want a 3080 or a 3090, maybe the 40 series coming up soon.
@@ThisBytesForYou this rtx 3060 is abit pricey for me, any other recommendation that is a bit cheaper?
well you could go with the 3050, but that will drop performance even more, what is more performance today, will be less performance tomorrow, as the PC ages, your components will seem less powerful, so the 3060 is what I would recommend. Custom PC's are not cheap and 4K is not an entry level resolution.
Hello i am about to buy this gpu but i am a bit confused
Msi rtx 3060 oc or. Evga geforce rtx 3060 xc. Is there any difference and which one is better
Please provide exact model numbers so I can help you.
Bro you are a life saver i love u
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Hey man I don’t know if you still reply to these comments but would a nvidia GeForce Rtx 3060 gddr4 fit into a pc with a pcie 2 either x8 or x16
I reply to all my videos.
So that I can help, please list the manufacturer and exact model number of the following components:
1. Motherboard
2. CPU
3. RAM
4. Video Card
5. Power supply
6. Monitor.
7. Are you running through HDMI, DP, DVI, VGA, etc?
8. UEFI in the BIOS from Legacy. If it was set to Legacy, you will need to reinstall windows to get correct support.
Hello, sir. I have quick question....
EVGA RTX 3060 XC
or
MSI RTX 3060 GAMING X
please help me i want to buy but confuse about this two which is better???
EVGA, faster Core speed and backed by EVGA's amazing support: geni.us/NaQwu, global Amazon affiliate link
@@ThisBytesForYou OMG thank you sir, really appreciate you answer it that fast. subbed and liked
always aa pleasure my friend, so very happy I could help you and thank you so much for your support, it means the world to me.
hello, i was wondering if i needed to uninstall any drivers if i was just booting off of integrated graphics?
I go over this in the video, but no you don't, if you like to have potential issues, if you want the best performance and least amount of issues, you DDU
Super, merci. C'est parfait. Lot of thanks.
Très content que ça t'ait plu mon ami. Always a pleasure. Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I haven’t got those cables you attached to the graphic card inside computer box (pc is quite old tho) is it still going to run ?
Got the answer scrolling down through comments. Gonna order new power supply.
Thanks
impossible for me to tell you, since I have no information on your machine. So that I can help, please list the manufacturer and exact model number of the following components:
1. Motherboard
2. CPU
3. RAM
4. Video Card
5. Power supply
6. Monitor.
PLease, reply to the comment, I don't get notifications on an edit, I just look through my comments. If you could though... before you spend money on a power supply, when you are not sure, answer the previous comment so I can help you.
@@ThisBytesForYou
Asus P8H61-MX motherboard
16gb ram
ATX-500B power supply
AOC Gaming C27G2AE monitor
OK, so your motherboard does have UEFI, which is required for this card to work, though the last published BIOS was 2013, running off of the H61 chipset, it will work, and thankfully you have 16gigs of RAM though the cpu might slightly bottleneck the video card, though it will still work.
does the 3060ti EVGA XC have RGB?? mine doesnt glow up :(
Have you watched this video
Hi. I have the card, the fans start but it will not engage the HDMI? I was wondering if my motherboard is too old. It was made in 2014. Manufacturer
Intel Corporation
Model
DZ77BH-55K
Version
AAG39008-400
Is there a way to check this? Thanks for the video, I followed it exactly.
yes it is, but I highly recommend flashing the BIOS to the latest version and setting your PCIE to PCIE Gen3. Make sure you have a 550Watt power supply with an 8Pin PCIE connection and make sure you are using it. Also, if you can get it to work, this video will help you flashing the firmware which fixes an issue where either DP or HDMI doesn't work: th-cam.com/video/uO351_LhGh8/w-d-xo.html, let me know if this helps.
@@ThisBytesForYou thanks. Will do all that. I have aGTX970 with an i7 and 16 gigs ram. Works great so I think you are right, just need to tweak a few things.
@@JhampaShaneman sounds good my friend, let me know how it goes.
Hey, it worked!!!!!!! I just did a BOIS flash and it worked. I was all set to return it and cry. I got it for a Oculus 2 VR on Skyrim. Now to disappear into that world. Do you have some settings for Afterburner? I heard RTX 3060 almost matches RTX 3060 Ti when boosted.
@@JhampaShaneman Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. I hope you have some fun.
I'm building my first ever gaming pc and I'm so excited! (I'm currently using a gt 730 lol)
I was able to get this same card, so thank you for the upload! My question is, does everything in this video apply to a completely newly built setup (other than switching cards)?
wow, congrats my friend, that's a HUGE leap to a 3060, I hope you have a sufficient power supply for it, its a huge leap in so many ways. To a new build yes, but you might also want to check this out; th-cam.com/video/8JuC_Dpm6-c/w-d-xo.html
@@ThisBytesForYou thank you! Honestly, it's a dream come true for me. I'm gonna get a 750W PSU (Corsair CX750M), so that should be enough. I'm still very excited, too bad I'm short on money, because this way I'm limited to buying one component/month... but I'm getting there! lol
Thank you for the kind words and the link, I'll be sure to check the video out before I start building!
Ha Ha, that's quite a coincidence. I just got notified today for the 3060 so in a few days! I had to reuse my Asus GT730 in my new build temporarily whilst "waiting" Even the GT730 performed better on my new build with a new Samsung 32/SR75 UHD monitor, Let's hope were both similarly impressed once installed with all the great tips from ThisBytesForYou!
Hi man, I got an used EVGA RTX 3060 XC but I can’t get it to work on my system. At startup it doesn’t even blink any lights and the fans do not start, no signal is sent to the monitor, nothing. It is not the black edition so I guess some light should be present at startup, right? I have and old Aorus GTX 1060 which is working well so I am starting to think the 3060 might be faulty.
So that I can help, please list the manufacturer and exact model number of the following components:
1. Motherboard - manufacturer and exact model number
2. CPU - manufacturer and exact model number
3. RAM - manufacturer and exact model number
4. Video Card - manufacturer and exact model number
5. Power supply - manufacturer and exact model number
6. Do you have ALL of the PCIE connections plugged in, and not daisy chained or pigtailed, each coming directly from the power supply?
@@ThisBytesForYou Thanks for your reply!
1 - Intel i7 7700k @ 4.2GHz
2 - MSI H110M PRO-VH (MS-7996)
3 - Crucial DDR4-2400MHz (2x8GB) BLS8G4D240FSEK.8FBR
4 - EVGA GeForce RTX 3060 XC GAMING 12 GB
5 - EVGA 650W GQ 80+ Gold
6 - Yes, all connected directly from the PSU. The 3060 uses the same single 8pin connector as the 1060.
yup, same connector, but it requires more power, but that's good that you have a 650, it only requires 550Watts. Your board should support it, I recommend going up to the latest BIOS available here: us.msi.com/Motherboard/H110M-PRO-VH/support#bios, of course you will to pop in the 1060 for now. After you flash the BIOS, make sure you change the support from Legacy to UEFI, I dont know where in your BIOS that is, BUT if your os is install on an MBR instead of a GPT partition, you will have issues booting into windows. Check out this video, from the :25 mark till 6:35 I show you how to check to see if your OS is installed MBR or GPT then how to change it in the BIOS and in OS. Though, the BIOS would help your situation more, it is preferred to have the BIOS set to UEFI and your OS on a GPT partition.
Also, in the BIOS verify that your PCIE slots are set to Gen 3 or 4, maybe it might need auto in order to work, updating the bios would help this as well. Aside from that, it should work, it might be dead, verify it is firmly seated.