Just completed this mod. Bought a 2024 Silverado 2500HD LT. Love the truck but knew I had to replace those headlight bulbs. The link is now good for the H11 LED bulbs. Easy install. Took about 10-15 minutes per side. Nice work!
@@mattduvall7699 I ordered the bulbs that are in the link. They fit perfectly and I have had no issues. You'll be surprised how much more vision you'll get compared to the bulbs that come on the truck, especially the high beams.
I have been driving my son's 2024 Chevy Silverado for last few days i love it i love the power and the allison 10 speed i dont know how they can get much better one great truck and it was built in flint mich.
Just found your videos and subscribed. They are a great help, thank you! Just got my 2024 Silverado 2500HD custom and already have the sealights on order. Have you ever considered adding radio/stereo controls to the steering wheel? It looks like the panel is there. Could it be as easy as popping in a plug/play piece? Probably not, but one can hope. Thanks again for the helpful videos.
Waiting on my 2024 to come in and was reading the Owner’s Manual; Bulb Replacement. It states “Caution - Do not replace incandescent bulbs with aftermarket LED replacements bulbs. This can cause damage to the vehicles electrical system.” Thoughts?
I've bever had any issue on any of the vehicles, but I don't ever change out anything where I'd have to splice wiring or change it.. i dont add diodes or canbus's.....like blinkers etc. If its plug and Play I've never had one issue with that at all.
This didn’t work out well for me. At first it was great then the high beams started flickering. A week later on the highway ALL lights stopped working until I shut off the high beams. I ordered a set of canbus decoders to see if that helps. I’m loving the led’s over the crappy halogens so I’m not ready to throw in the towel yet. I’ll update once I get em’.
Im going feom a 2022 GMC AT4 to this same Chevy 2500 LT. I know they're different trim levels but a bit disappointed to spend this much money in 2024 and not have full LED lights!
Yeah, I'm not sure why , but all three still run regular halogen bulbs...for the mula....they should step up the game....luckily, we can donit for less than 50 bucks, but it is frustrating.
I just put the H11 for Low and High also changed back up and plate lights to LED and now my driver front marker light, blinker, rear right marker light and plate light not working, took it to dealer and they said you can not put aftermarket LED light in by the way it's a 2024 Silverado 2500HD Custom so they told me to put the origanal lights back in and if that doesn;t fix it to bring it back in and they would take a look at it. I now have an appointment with the Chevy dealer to get the lights fixed.
Really like your videos. I’m about to pick up a ‘24 Chevy 2500 Custom and really want to install fog lights. I have not been able to find anything on google or TH-cam though! Have you had any luck or thought about putting fog lights in yours? I assume the caps just pop out and you’d be able throw after market fog lights in their place (also assume you’d have to run wiring). Let us know your thoughts- I’ve seen the question asked on some forums and I’m sure others here would be interested as well. Thanks!
I appreciate the feedback and glad you have you here. I've looked into it and the caps do come out. Since the custom doesn't have the option on the switch it would have to be all aftermarket wiring and switch. Unfortunately, There isn't a plug and play option from GM.
@@automotiveinquiries9673 ahh ok. Yea I can’t even seem to find aftermarket lights that would just pop into the space the caps are covering. Maybe still too new? Guess I’ll worry about it after I get the truck haha. Also, I noticed your ring in your videos. You on the job? I’m a patrol Sgt. in Michigan. Thanks for the reply man!
Ok so I ordered what you show and I received two bulbs. Type:S1 Model:H8/H9/H11/H16... I'm guessing this will take care of my daytime and my low beam. What do I need for my high beams? H11?
For those of you that have done this upgrade on this truck, do you have any issues with radio interference? I put cheap LEDs in my old F150 and now stations that used to come in clear have more static until I get closer to the radio station. I love my '24 2500HD Custom, really the only thing I don't like about it is the crappy headlights.
They are brighter than the stock halogen, however from my research they aren't brighter than the oem LED on the higher trims. I've not had any issues with people flashing me with these on. So I'd say no to having issues with that. I've use them on over 20 vehicles and not had one issue with that. Hope that helps. Thanks for watching.
@@automotiveinquiries9673 thanks. Yeah the manufacturer website says they are designed for reflective headlights and focus the light pattern to the ground. I stood 50ft in front of my truck and was not blinded at all.
Bought these for my 2024 Chevy 3500 HD the bulbs work fine on low beam but on high beam they flicker and I get a warning light on dash sometimes they sent me a decoder but it did not fix the problem.
@@chadtroutman4410I recently noticed flickering on high beams but it’s intermittent. Sometimes it’s smooth but sometimes it flickers. I rarely use my high beams so not an issue. Googling the issue and it appears there can be a voltage irregularity that causes the flickering.
They sent me different decoders to try to stop the flickering when the high beams were on it did stop flickering but now the high beams are shutting off intermittently first right goes out them will come back on later then the left goes out and will come back on I was really hoping they would work but I think I am done messing with Sealight going to try another brand, would appreciate any advice for different brands people have had good luck with.
So chevy uses a dual element turn brake, running. I tried all that didn't require a in line canbus or capacitor......I don't like to splice in. And all of them produced hyperflash and the warning on the dash of a bulb out. So on the rear I do have vids for back up lights and the license plate lights.
I just installed the Sealight in my 2024 Chevy 2500 LT in one side. When turning the low beams the light was white and bright as I wanted. The original yellow is so old fashion, I cannot believe Chevrolet is putting this on in a new truck. Anyway, when I turn on the high beams I notice some flickering in the high beams but occasionally in the low beams too. Turning off high beams, the low are more stable but not 100%. I swap the lights and used the other box I have for the other side and the result was the same. I contacted Sealight and they told I may need a decoder. At this point, adding another harness, I thought it was too much wires already, so I decided to return it. Sorry, but at least for me it did not work out for some reason.
Sorry to here that, there was one other watcher who said that he got a bad set, re ordered and returned the flickering ones and was all good. Flickering is definitely not right. I will say that the yellow lights are not great, but the sealights I put in the vhevy are brighter than the new laramie ram LEDs.
@@automotiveinquiries9673 I know they have a fan just wondering how the heat gets vented out of the headlight housing. I am thinking about getting a 2024 and wouldn't want to melt brand new headlights. Also wondering how the auto high beam works? It just goes on and off when you meet cars? Does it work good?
@mossman381 absolutely 💯. The rubber can on the back is for dust, air gets to the entire light. I drive always with my headlights on, just what I do. I had these in both my 22 zilla and this truck, the heat is less than the standard bulb and the standard bulb didn't melt anything. I feel that these manage heat better than the standard bulb. The bezels are cooler to the touch than when the incandescent bulb was in it. They must get enough flow around the entire bezel, but they are way cooler in heat.
Something I learned today that if you don’t put these lights into the housing, they will not work at all so you cannot test them without snapping them into place
I didn't heed your original warning an ordered the same package that you originally did. So I ran a few days with just the low beams replaced. No flickering. Today installed the high beams, and I could detect a VERY slight flicker on my garage way when the high beams are on. It goes away with only low beams. My question, is the proximity of the pigtail of the two lights going to affect this? I tried to button up the installation a little with one zip tie per lamp. Might it be better to forgo the zip tie on the high beams and let that pigtail hang a bit lower in that cavity?
I didn't use any zip ties. I've had a few say that they had flicker. I'd request a replacement from sea light and swap them out. I think there are just some that have the flicker. But I haven't seen any issue with the placement of the pigtails. Sea light will send another set out free of charge just have to go through the process.
@@automotiveinquiries9673 Thanks for your quick reply! I’m removing the zip ties from the high beams right now after driving to bounce them around. The flicker is so faint, I’m not sure it’s noticeable on the road. I do know that I didn’t feel safe driving in deer country with the stock lights after coming from a 1500 RST with factory LEDs. I’ll send a video clip to Sealight if it’s bad enough.
I got these bulbs (H11) and the light flicker was horrible. One light went out for about 2 seconds. No clue why mine did this, but I sent them back. They didn’t work. I have a 2024 Silverado 2500 LT
I'm a little late to the party, but that link is not working. Do you have another one or is sealight not offering them anymore. The website says doesn't fit 2024 Silverado 2500.
@@bradblanchette4078 no worries, I'll get the link up tomorrow. But it will take 4 h11s, bo 9005s. I will get this back together and apologize for the inconvenience.
Have you changed the tail lights in the 2024 Chevy 2500 custom? If so, could I take the LEDs out of aftermarket lights and use my stock halogen bulbs if i choose to? Thanks, Kent
So I tried every different kind I've used in the past with canbus and resistors, however, hyperplasia, could not be stopped. I don't like to change Any wiring, so I have not been able to swap bulbs on the taillights. I have been able to do the back up lights. If you have a complete aftermarket LED light assembly, I'd presume those would be plug and play. If you don't mind cutting and splicing, which could void warranty, then just about any bulb will work.
did you experience any radio interference? 2024 2500 HD Lt. changed the H11 low beams with morimoto 2 stroke LEDs and the radio was just about useless on regular fm. didn't catch your video until after i had purchased the other brand.
Watched this video when it came Out and ordered these bulbs and within the last week my headlights have completely shut down 5 times while driving in the dark. Total failure of all headlights. I’ve narrowed it down to the intellibeam. Just fyi!
Yes and I apologize for this, and the video had already went up and was rolling. So chevy says its an h9 and h11, however the h9 connector on the bulb, Not just the led, was different. The chevy wiring connector was the same on both high and low and an H9 bulb smaller. As I was looking at it the connector it was the same as the h11 instead. So I updated the description and the link. They come in a set of four, but you'll need 4 h11s, and you'll have no issues, thousands have done this swap with the 4 h11s, from this video.
Hi I just got my 2024 2500HD custom your video you have up to replace the bulbs says that the H-11 and 9005. Fits but when I went to get them it says it will not fit my vehicle,they fit on yours so can I buy them and will they fit?
Sorry, so chevy says those are the bulb sizes. I made a note in the description. Instead of 9005, the bezels will need h11s for the high and the low, do the sealight will work, and the price is basically the same. The link I changed in the description to the h11 sets. Each set has 2 bulbs, you'll need 4 bulbs total.
What he doesn’t show you is how stupid hard it is to get those rubber caps back on and how some of the fender liner torx screws will refuse to go back in without a lot of fiddling.
The trick.to the rubber caps is push only on the middle to push back on. They ho on super easy. As for the torx....I haven't had any issues as long as they are lined up and not cross threaded
Sorry this video took off before I could edit back in that you'll need 4 H11s, no 9005 after all. Link should be for the 4 pack of those. I edited the description to note this but didn't get to add another video.
@@automotiveinquiries9673 Thanks. Your videos on the new 6.6 gas helped me make a informed decision on purchasing my 2024 LT. Left a 2018 problematic L5P for the 6.6 gas. Thx again!
I feel like they should. Separate sensors that turn on auto beam that control headlight beam. Kind of like auto headlights in any modern car. Can't find any solid answer tho. Gf bought a new colorado with same question. If not I'll just put the h11 in my 4runner lol
Help!! I did the swap out just as mentioned. New LED’s are fine, but when turning on brights, they have a flicker! Turn brights off and no flicker. This is on 2024 2500hd custom. Bought the exact lights H11 for both low and high beams. Any ideas!?
A few people have got them and had the flicker, although that's not the majority. Its frustrating, but contact sea light and they'll need to be swapped out with new ones, but the6ly are really good about taking those back and replacing them at no cost. I'm bummed that this has happened with probably 30 people that did this swap, because it shouldnt happen. I'll apologize for them, but other than the time it won't cost more to get them replaced. I used to run the 200 dollar bulbs from other companies and encountered some flicker and got my money back and found sea light and I've never regretted it. I've bought 20 sets for all of our cars and never had flicker. But some Will as I did with the other companies. If you got then from the Zahn, you can just return or exchange them. Again bummer and so sorry that you had this. I know that once you get the new set they will be worth the time.
@@automotiveinquiries9673 after turning the truck on and off a couple times, and running down the road and back the flickering is gone! I’ve turned on and off several times, and the flickering hasn’t returned. Christmas miracle! Thanks for the reply. And Merry Xmas!
That's correct for some reason the 9005 on the Chevy has an h11 connector for both high and low. You'll need 4 total h11s and they will work. I don't use their vehicle selector it's frustrating, bit the newest link for them should be for a set of 4 h11s in the description.
You should be able to. Most of the gassers I've seen have the extra battery tray, you can run your own cables or buy the chevy ones. The spare tray should be on the drivers side near the fuse box. Mine had both batteries, but, every other gas didn't but had the tray
@@automotiveinquiries9673 thanks I goty truck just about a month ago and I been watching your videos they been helping a lot and I was able to make a decision and got a bowtie
@automotiveinquiries9673 excellent, my 24 custom is supposed to be here this week sometime... I would love to have the lights with led strips in them, but I'll settle foe led bulbs... also, if you find a trick for putting in fog lights. Let us know!
@nathanparker4142 the link should be in the description but I'll get the numbers. It will take two h11s per side one for high, one for low.... H11/H8/H9 9005/HB3.. the 9006 won't fit and you are correct the site says they won't fit, but they do. Congrats on the new rig!
Sorry about that, I went back and put all the newest links in the video. I personally tried them all and they are good to go now for sure. All the other bulb links I put also in the description.
@biggt28 I checked that link before and it worked....so it now links to a 9005. I just changed the link again. It's 42.99 and has a 25%off coupon box. You'll need 4 total. Sorry about that.
@automotiveinquiries9673 Okay, it didn't seem right, glad I hesitated and made sure with you first. The other 2 links for the license plate and backup bulbs are still good correct?
Hey man the link isn’t working so I went right to Sealights site and they don’t have an option for 2024. Just to verify I need 4 total H11 bulbs right ?
Sorry for the confusion on this the kit in the video itself shows what GM shows as the bulb numbers, but the 9005 won't fit. The link in the description is for h11. You will need an h11 for the high and one for the low. They will plug and play at that point. I will try and get the video fixed shortly.
@robertboyer5498 it's now for a pair, the link I think changes with their inventory. So I just did a pair, with the coupon savings, you'd still need another pair, price is basically the same, I'll keep it updated when I find it's changed. Sorry for the issue with it.
Ok. I bought the recommended lighting for my 24 on nope they don't fit. All 4 connectors for the bulbs are the same. Your kit that I bought has two different size connectors for low beam and high beam. Bought a different kit , bam plug and play. No extra wiring or capacitors to hide and or mount. My kit just replaces the bulb with a 6000 lumens cool white. So people do YOUR OWN PRODUCT SEARCH FIRST.😮
All I can say is an h11 is an h11. They do fit and do work. I've had them I stalled since the truck was new, zero issues and plug and play. You'll need 4 total. My truck.is definitely a 24, but it will only work on lt and lower trims. But if you don't feel comfortable with me telling you and want to go off the site, it's okay, the process is the same and there are tons of other companies that make them you can try. Hope you find what you need, drive safe out there.
@@automotiveinquiries9673 I’m sorry I think I should clarify, my auto high beam feature works fine it turns on and off the high beams as it should, however I can no longer disable the feature at the button on the end of the turn stock.
@@automotiveinquiries9673 also, thank you for the reply. Love your channel. You are the one that convinced me to get the 24 custom gasser and I absolutely love it. 👌🏼
@dudewalker3 I appreciate that. I thought it was the bulbs. Still sorry that stopped working. Hopefully chevy can get that fixed for you and get it working again.
Might be a Chevy problem, it just happened immediately after swapping the lights, wondering if they somehow caused it. Looks like I’ll be calling sea light as well. 👍🏼
Just completed this mod. Bought a 2024 Silverado 2500HD LT. Love the truck but knew I had to replace those headlight bulbs. The link is now good for the H11 LED bulbs. Easy install. Took about 10-15 minutes per side. Nice work!
Did you buy them off Amazon? Just got my 2500hd lt yesterday and Amazon says they don’t fit with the h11
@@mattduvall7699 I ordered the bulbs that are in the link. They fit perfectly and I have had no issues. You'll be surprised how much more vision you'll get compared to the bulbs that come on the truck, especially the high beams.
So is the same bulb used for low and high? @@capitaldistrictlandsurveyi8153
I just bought a 2024 3500HD LT. What bulbs are needed for high and low? The H11 and ?. Is the H11 the low beam? Thanks
@@jayb7675 on my 2024 2500HD, I replaced the high and low beam with the H11 bulb. No issues and the lumination is 100% better.
I have been driving my son's 2024 Chevy Silverado for last few days i love it i love the power and the allison 10 speed i dont know how they can get much better one great truck and it was built in flint mich.
Thanks for such a great video! Changing mine tomorrow
The owners manual for my 2500 custom explicitly states not to change from halogen to led as it can harm the electrical circuitry and wiring.
Great walk through video of the install. Love that thin blue line ring brother.
Thanks, appreciate...back the blue
This video has been awesome help! Thank you for the good clear instructions.
Those are great LEDs i have them in my 15 RAV4, no issues since I've had them in almost two years now.
Just did it with the H11 Bulbs. Thanks for your video man
Absolutely, thanks for being here
Only gripe I have about my 2024 HD is it did not come with cab lights. I think all HD trucks should have them.
Absolutely 100%
Great video ! I’ll be ordering some for my new ride !
Thanks for watching.
Just found your videos and subscribed. They are a great help, thank you!
Just got my 2024 Silverado 2500HD custom and already have the sealights on order.
Have you ever considered adding radio/stereo controls to the steering wheel? It looks like the panel is there. Could it be as easy as popping in a plug/play piece? Probably not, but one can hope.
Thanks again for the helpful videos.
Wondering the same thing.
Waiting on my 2024 to come in and was reading the Owner’s Manual; Bulb Replacement. It states “Caution - Do not replace incandescent bulbs with aftermarket LED replacements bulbs. This can cause damage to the vehicles electrical system.”
Thoughts?
I've bever had any issue on any of the vehicles, but I don't ever change out anything where I'd have to splice wiring or change it.. i dont add diodes or canbus's.....like blinkers etc. If its plug and Play I've never had one issue with that at all.
I also read this in my 2024 silverado 2500hd custom
Did you use the 9005/HB3 cause they won't fit on mines. 2024 HD Custom
Yea it’s a h11 and h9 this guy got me ordering the wrong ones lmao
Awesome video. Can you post a link for the LED Lights. I have a 2024 Silverado 2500HD also.. Thanks...
Absolutely, thanks for watching.
www.amazon.com/dp/B06ZZCR1V6?psc=1&ref=ppx_yo2ov_dt_b_product_details
This didn’t work out well for me. At first it was great then the high beams started flickering. A week later on the highway ALL lights stopped working until I shut off the high beams. I ordered a set of canbus decoders to see if that helps. I’m loving the led’s over the crappy halogens so I’m not ready to throw in the towel yet. I’ll update once I get em’.
Im going feom a 2022 GMC AT4 to this same Chevy 2500 LT. I know they're different trim levels but a bit disappointed to spend this much money in 2024 and not have full LED lights!
Yeah, I'm not sure why , but all three still run regular halogen bulbs...for the mula....they should step up the game....luckily, we can donit for less than 50 bucks, but it is frustrating.
Thanks for the info I need them
I just put the H11 for Low and High also changed back up and plate lights to LED and now my driver front marker light, blinker, rear right marker light and plate light not working, took it to dealer and they said you can not put aftermarket LED light in by the way it's a 2024 Silverado 2500HD Custom so they told me to put the origanal lights back in and if that doesn;t fix it to bring it back in and they would take a look at it. I now have an appointment with the Chevy dealer to get the lights fixed.
I want to add fog lamps, did you add fog lamps to your 2024 custom?
First nightfall I pulled over like wtf! I couldn't believe they weren't led
It’s horse shit that you can pay $60,000+ for a truck and get halogen bulbs
I wasn't sure that my headlights were on. Looked like DRL's. Pathetic. Actually scary to drive in deer country.
Really like your videos. I’m about to pick up a ‘24 Chevy 2500 Custom and really want to install fog lights. I have not been able to find anything on google or TH-cam though! Have you had any luck or thought about putting fog lights in yours? I assume the caps just pop out and you’d be able throw after market fog lights in their place (also assume you’d have to run wiring). Let us know your thoughts- I’ve seen the question asked on some forums and I’m sure others here would be interested as well. Thanks!
I appreciate the feedback and glad you have you here. I've looked into it and the caps do come out. Since the custom doesn't have the option on the switch it would have to be all aftermarket wiring and switch. Unfortunately, There isn't a plug and play option from GM.
@@automotiveinquiries9673 ahh ok. Yea I can’t even seem to find aftermarket lights that would just pop into the space the caps are covering. Maybe still too new? Guess I’ll worry about it after I get the truck haha. Also, I noticed your ring in your videos. You on the job? I’m a patrol Sgt. in Michigan. Thanks for the reply man!
The updated bulbs for the 2024 are fanless is this what you are recommending now instead of the one with the fan,thanks good videos
I've ran fanless ones before. It appears the other are sold out, so you would be fine running the fables. Neither seem to get hot at all.
Ok so I ordered what you show and I received two bulbs.
Type:S1
Model:H8/H9/H11/H16...
I'm guessing this will take care of my daytime and my low beam. What do I need for my high beams? H11?
For those of you that have done this upgrade on this truck, do you have any issues with radio interference? I put cheap LEDs in my old F150 and now stations that used to come in clear have more static until I get closer to the radio station. I love my '24 2500HD Custom, really the only thing I don't like about it is the crappy headlights.
I put these on my 2024 3500 and they work great. My big question is will these blind other drivers from putting a LED bulb in a halogen housing?
They are brighter than the stock halogen, however from my research they aren't brighter than the oem LED on the higher trims. I've not had any issues with people flashing me with these on. So I'd say no to having issues with that. I've use them on over 20 vehicles and not had one issue with that. Hope that helps. Thanks for watching.
@@automotiveinquiries9673 thanks. Yeah the manufacturer website says they are designed for reflective headlights and focus the light pattern to the ground. I stood 50ft in front of my truck and was not blinded at all.
Bought these for my 2024 Chevy 3500 HD the bulbs work fine on low beam but on high beam they flicker and I get a warning light on dash sometimes they sent me a decoder but it did not fix the problem.
@@chadtroutman4410I recently noticed flickering on high beams but it’s intermittent. Sometimes it’s smooth but sometimes it flickers. I rarely use my high beams so not an issue. Googling the issue and it appears there can be a voltage irregularity that causes the flickering.
They sent me different decoders to try to stop the flickering when the high beams were on it did stop flickering but now the high beams are shutting off intermittently first right goes out them will come back on later then the left goes out and will come back on I was really hoping they would work but I think I am done messing with Sealight going to try another brand, would appreciate any advice for different brands people have had good luck with.
Have you upgraded any of the rear lights to LED?
So chevy uses a dual element turn brake, running. I tried all that didn't require a in line canbus or capacitor......I don't like to splice in. And all of them produced hyperflash and the warning on the dash of a bulb out. So on the rear I do have vids for back up lights and the license plate lights.
I just installed the Sealight in my 2024 Chevy 2500 LT in one side. When turning the low beams the light was white and bright as I wanted. The original yellow is so old fashion, I cannot believe Chevrolet is putting this on in a new truck. Anyway, when I turn on the high beams I notice some flickering in the high beams but occasionally in the low beams too. Turning off high beams, the low are more stable but not 100%. I swap the lights and used the other box I have for the other side and the result was the same. I contacted Sealight and they told I may need a decoder. At this point, adding another harness, I thought it was too much wires already, so I decided to return it. Sorry, but at least for me it did not work out for some reason.
Sorry to here that, there was one other watcher who said that he got a bad set, re ordered and returned the flickering ones and was all good. Flickering is definitely not right. I will say that the yellow lights are not great, but the sealights I put in the vhevy are brighter than the new laramie ram LEDs.
I have the same truck and the H11 were correct but the 9005 you show don’t fit.
I had to make a correction in the description. It will take 4 h11s. I apologize for the inconvenience. I did change the link to the four h11s.
So what's the H9 is that the 9005
I'm looking to buy these, I don't see the exact ones you bought. I see yours had 4 bulbs but looks like you only used 2 of them. Any ideas? Thanks!
20$ to have them installed at Valvoline.
How do they cool being sealed up with a rubber plug. Seems like it would get hot without a place for the heat to vent.
These don't get hot, they have built in cooling fins. They actually stay cooler than the normal bulbs.
@@automotiveinquiries9673 I know they have a fan just wondering how the heat gets vented out of the headlight housing. I am thinking about getting a 2024 and wouldn't want to melt brand new headlights. Also wondering how the auto high beam works? It just goes on and off when you meet cars? Does it work good?
@mossman381 absolutely 💯. The rubber can on the back is for dust, air gets to the entire light. I drive always with my headlights on, just what I do. I had these in both my 22 zilla and this truck, the heat is less than the standard bulb and the standard bulb didn't melt anything. I feel that these manage heat better than the standard bulb. The bezels are cooler to the touch than when the incandescent bulb was in it. They must get enough flow around the entire bezel, but they are way cooler in heat.
Something I learned today that if you don’t put these lights into the housing, they will not work at all so you cannot test them without snapping them into place
I didn't heed your original warning an ordered the same package that you originally did. So I ran a few days with just the low beams replaced. No flickering. Today installed the high beams, and I could detect a VERY slight flicker on my garage way when the high beams are on. It goes away with only low beams. My question, is the proximity of the pigtail of the two lights going to affect this? I tried to button up the installation a little with one zip tie per lamp. Might it be better to forgo the zip tie on the high beams and let that pigtail hang a bit lower in that cavity?
That would be with the engine running. No issues on the dashboard. This is a 2024 LT Duramax.
I didn't use any zip ties. I've had a few say that they had flicker. I'd request a replacement from sea light and swap them out. I think there are just some that have the flicker. But I haven't seen any issue with the placement of the pigtails. Sea light will send another set out free of charge just have to go through the process.
@@automotiveinquiries9673 Thanks for your quick reply! I’m removing the zip ties from the high beams right now after driving to bounce them around. The flicker is so faint, I’m not sure it’s noticeable on the road. I do know that I didn’t feel safe driving in deer country with the stock lights after coming from a 1500 RST with factory LEDs. I’ll send a video clip to Sealight if it’s bad enough.
I got these bulbs (H11) and the light flicker was horrible. One light went out for about 2 seconds. No clue why mine did this, but I sent them back. They didn’t work. I have a 2024 Silverado 2500 LT
I'm a little late to the party, but that link is not working. Do you have another one or is sealight not offering them anymore. The website says doesn't fit 2024 Silverado 2500.
@@bradblanchette4078 no worries, I'll get the link up tomorrow. But it will take 4 h11s, bo 9005s. I will get this back together and apologize for the inconvenience.
Have you changed the tail lights in the 2024 Chevy 2500 custom? If so, could I take the LEDs out of aftermarket lights and use my stock halogen bulbs if i choose to? Thanks, Kent
So I tried every different kind I've used in the past with canbus and resistors, however, hyperplasia, could not be stopped. I don't like to change Any wiring, so I have not been able to swap bulbs on the taillights. I have been able to do the back up lights. If you have a complete aftermarket LED light assembly, I'd presume those would be plug and play. If you don't mind cutting and splicing, which could void warranty, then just about any bulb will work.
did you experience any radio interference? 2024 2500 HD Lt. changed the H11 low beams with morimoto 2 stroke LEDs and the radio was just about useless on regular fm. didn't catch your video until after i had purchased the other brand.
I've never had any issues after installing the sealights, in regards to the light functionality, or any interference or codes or anything.
thank you I'll give them a try@@automotiveinquiries9673
What is the model number Amazon states it is not applicable to my 2024 Silverado 2500HD ?
Do these H11 work ok with the daytime running lamps
I lost my drls after I installed these lights today, hoping someone has an answer
Thanks for the walk thru.
absolutely, I'll be doing the remaining truck lights soon.
Watched this video when it came
Out and ordered these bulbs and within the last week my headlights have completely shut down 5 times while driving in the dark. Total failure of all headlights. I’ve narrowed it down to the intellibeam. Just fyi!
Sorry to hear that, my friend that has kong hasn't had this issue. Again sorry it didn't work out.
So confused he pulled out h9 but in the description says h11 for both high and low, at first he said two different bulbs for hig and low?
Yes and I apologize for this, and the video had already went up and was rolling. So chevy says its an h9 and h11, however the h9 connector on the bulb,
Not just the led, was different. The chevy wiring connector was the same on both high and low and an H9 bulb smaller. As I was looking at it the connector it was the same as the h11 instead. So I updated the description and the link. They come in a set of four, but you'll need 4 h11s, and you'll have no issues, thousands have done this swap with the 4 h11s, from this video.
Do you have a link or photos to what they look like at night?
Absolutely 💯. th-cam.com/video/_caS9L47keM/w-d-xo.htmlsi=86Pds5_p8IqJ6AtE
So I assume that they are 2023 led’s that fit the 2024 2500hd LT?
My truck is a 24, but yes they will fit 2020 and up...lt and lower trims
Maybe a dumb question but why is there 4 in the box
He more than likely ordered high low as a set.
@@whome1629 yep they come two in a box, you need two for each side, so youll need two boxes. Sorry for the late response.
You might want to redo the video; you are showing a 9005/HB3 light when it will not work. just saying
My 2024 has a h9 and h11 not the 9005. I ordered the ones you show and the connector on the 9005 is different
I was going on here to post the same question. I got mine today and realize the lower bulb is an H9 and they don’t fit.
This mf haha me to
Did yall find high beam bulb that fits?
Hi I just got my 2024 2500HD custom your video you have up to replace the bulbs says that the H-11 and 9005. Fits but when I went to get them it says it will not fit my vehicle,they fit on yours so can I buy them and will they fit?
Sorry, so chevy says those are the bulb sizes. I made a note in the description. Instead of 9005, the bezels will need h11s for the high and the low, do the sealight will work, and the price is basically the same. The link I changed in the description to the h11 sets. Each set has 2 bulbs, you'll need 4 bulbs total.
What he doesn’t show you is how stupid hard it is to get those rubber caps back on and how some of the fender liner torx screws will refuse to go back in without a lot of fiddling.
The trick.to the rubber caps is push only on the middle to push back on. They ho on super easy. As for the torx....I haven't had any issues as long as they are lined up and not cross threaded
Can you post a link that works for the headlights?
Sorry I meant to fix that, a watcher yesterday said there was an issue. I'll have that fixed in 5 minutes.
Hi all. I noticed the link shows a 2 pack for low beam only. Is there a option for high beam bulbs as well? Thanks......
Sorry this video took off before I could edit back in that you'll need 4 H11s, no 9005 after all. Link should be for the 4 pack of those. I edited the description to note this but didn't get to add another video.
@@automotiveinquiries9673 Thanks. Your videos on the new 6.6 gas helped me make a informed decision on purchasing my 2024 LT. Left a 2018 problematic L5P for the 6.6 gas. Thx again!
Did any one add fog lamps to your 2024 custom?
Are the 194 bulbs good for the registration plate lights
Yep, 194 is the same on just about every car or truck after 2000 for the license plate or registration tag.
Does the auto dimming still work with the led lamps?
I feel like they should. Separate sensors that turn on auto beam that control headlight beam. Kind of like auto headlights in any modern car. Can't find any solid answer tho. Gf bought a new colorado with same question. If not I'll just put the h11 in my 4runner lol
Help!! I did the swap out just as mentioned. New LED’s are fine, but when turning on brights, they have a flicker! Turn brights off and no flicker. This is on 2024 2500hd custom. Bought the exact lights H11 for both low and high beams. Any ideas!?
A few people have got them and had the flicker, although that's not the majority. Its frustrating, but contact sea light and they'll need to be swapped out with new ones, but the6ly are really good about taking those back and replacing them at no cost. I'm bummed that this has happened with probably 30 people that did this swap, because it shouldnt happen. I'll apologize for them, but other than the time it won't cost more to get them replaced. I used to run the 200 dollar bulbs from other companies and encountered some flicker and got my money back and found sea light and I've never regretted it. I've bought 20 sets for all of our cars and never had flicker. But some Will as I did with the other companies. If you got then from the Zahn, you can just return or exchange them. Again bummer and so sorry that you had this. I know that once you get the new set they will be worth the time.
@@automotiveinquiries9673 after turning the truck on and off a couple times, and running down the road and back the flickering is gone! I’ve turned on and off several times, and the flickering hasn’t returned. Christmas miracle! Thanks for the reply. And Merry Xmas!
@chadwhite9799 absolutely, merry Christmas! And if they do, they are warranteed.
I lost my drls after installing these on my 2024 Silverado 2500 Custom. Anybody else? Or know why or if I can fix it easy enough? Thank you in advance
Amazon is telling me the H11 won’t work for my 2021 Silverado 2500. Can you confirm?
That's correct for some reason the 9005 on the Chevy has an h11 connector for both high and low. You'll need 4 total h11s and they will work. I don't use their vehicle selector it's frustrating, bit the newest link for them should be for a set of 4 h11s in the description.
Not a headlight question but can I put a second battery on my 2024 2500hd Gasser
You should be able to. Most of the gassers I've seen have the extra battery tray, you can run your own cables or buy the chevy ones. The spare tray should be on the drivers side near the fuse box. Mine had both batteries, but, every other gas didn't but had the tray
@@automotiveinquiries9673 thank you
@@JoseLopez-sc9mn absolutely, thanks for being here and subscribing.
Does the high beam and low beam take the same LED bulb?
yes, they are both H13's and they are awesome
@@automotiveinquiries9673 you stated h11 and 9005. That is not correct for a 2024. They are h11 and h9
@@toddchandonnait7834 this is what I ran into as well .
What is the bulb part number for high beam and low beam
H11 for both high and low....9005 did not fit
@@automotiveinquiries9673 thanks I goty truck just about a month ago and I been watching your videos they been helping a lot and I was able to make a decision and got a bowtie
When I look up the bulbs on Amazon,it states that they don't fit my 2024 2500hd. Would you know why this is?
I don't know why they do that, but the link in the description is good and they do work.
Ok I'll order them and give them a try. Thank you for getting back to me.
This will cover the day time running low and high beams
@@lego12066 it will for sure
@@automotiveinquiries9673 thanks again
Will adding these void the vehicle warranty??
They won't void any warranty at all. And I've been using them on all my vehicles for years, not one issue
@automotiveinquiries9673 excellent, my 24 custom is supposed to be here this week sometime... I would love to have the lights with led strips in them, but I'll settle foe led bulbs... also, if you find a trick for putting in fog lights. Let us know!
What is the exact part number on these bulbs? Says they don't fit via the link
@nathanparker4142 the link should be in the description but I'll get the numbers. It will take two h11s per side one for high, one for low....
H11/H8/H9 9005/HB3.. the 9006 won't fit and you are correct the site says they won't fit, but they do. Congrats on the new rig!
@automotiveinquiries9673 I gotcha yeah the link offered others. Didn't know which to select. So H11 for high & low beam?
Got a 2024 lt and I’ve started to notice a slight pulse with these led lights …. Seems to be sporadic tho ….
Do yours flicker or pulse at all ??
Link still isn’t working. If possible, could you please post the link to all the lights that you replaced? Im looking to change mine out.
Sorry about that, I went back and put all the newest links in the video. I personally tried them all and they are good to go now for sure. All the other bulb links I put also in the description.
@automotiveinquiries9673 Awesome man...thank you! I appreciate all the info and videos!
@@automotiveinquiries9673 So just to confirm, when I click the headlight link, it says H11 9005 bulb - pack of 4 for $79.99. Is that correct?
@biggt28 I checked that link before and it worked....so it now links to a 9005. I just changed the link again. It's 42.99 and has a 25%off coupon box. You'll need 4 total. Sorry about that.
@automotiveinquiries9673 Okay, it didn't seem right, glad I hesitated and made sure with you first. The other 2 links for the license plate and backup bulbs are still good correct?
Hey man the link isn’t working so I went right to Sealights site and they don’t have an option for 2024. Just to verify I need 4 total H11 bulbs right ?
Sorry about that, I'll re do the link, but you will need 4 H11 bulbs. Chevy says different H11 for high and low..
Thank you for the fast response. I can’t wait to get these on my LT and also thanks for the great install video
Ordered a 2024 2500 LT. Before i spend some money, the H11 is the one i need?
Yeah, that is the one. The 9005 won't work. Two h11sper light. As you have the lt with the bezels in this video.
Definitely dont order kit in link. Wrong ones for mine too.
Sorry for the confusion on this the kit in the video itself shows what GM shows as the bulb numbers, but the 9005 won't fit. The link in the description is for h11. You will need an h11 for the high and one for the low. They will plug and play at that point. I will try and get the video fixed shortly.
The link is only for a pair of bulbs, not 4 of them.
Let me look into it and change the link, they do that from time to time. Sorry about that.
@@automotiveinquiries9673 thanks brother!
Link changed again. Now it’s going to a pair of 9005’s and h11’s.
@robertboyer5498 it's now for a pair, the link I think changes with their inventory. So I just did a pair, with the coupon savings, you'd still need another pair, price is basically the same, I'll keep it updated when I find it's changed. Sorry for the issue with it.
So I need to buy the pair of h11 and 9005? That's what the link is sending me to
Ok. I bought the recommended lighting for my 24 on nope they don't fit. All 4 connectors for the bulbs are the same. Your kit that I bought has two different size connectors for low beam and high beam. Bought a different kit , bam plug and play. No extra wiring or capacitors to hide and or mount. My kit just replaces the bulb with a 6000 lumens cool white. So people do YOUR OWN PRODUCT SEARCH FIRST.😮
Do you have a link on the ones you got?
@@AlanJones-wx7rp No link, just went on Amazon and typed in LED lights automotive.
Says right on the website these do not fit 2024 Chevy Silverado…
All I can say is an h11 is an h11. They do fit and do work. I've had them I stalled since the truck was new, zero issues and plug and play. You'll need 4 total. My truck.is definitely a 24, but it will only work on lt and lower trims. But if you don't feel comfortable with me telling you and want to go off the site, it's okay, the process is the same and there are tons of other companies that make them you can try. Hope you find what you need, drive safe out there.
I did those for the high and low beams. Now my active high beam won’t shut off? Anyone experienced this?
I never had that happen at all. As of this date, I haven't had one other watcher say they had that happen, not sure why that would be.
@@automotiveinquiries9673 I’m sorry I think I should clarify, my auto high beam feature works fine it turns on and off the high beams as it should, however I can no longer disable the feature at the button on the end of the turn stock.
@@automotiveinquiries9673 also, thank you for the reply. Love your channel. You are the one that convinced me to get the 24 custom gasser and I absolutely love it. 👌🏼
@dudewalker3 I appreciate that. I thought it was the bulbs. Still sorry that stopped working. Hopefully chevy can get that fixed for you and get it working again.
Might be a Chevy problem, it just happened immediately after swapping the lights, wondering if they somehow caused it. Looks like I’ll be calling sea light as well. 👍🏼
This won’t pass safety inspection in VA and most states with an inspection requirement. You will have to swap the bulbs back.