Steel Manufacturing - Including Blast Furnace and BOS
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2024
- Steel manufacturing from start to finish, including blast furnace, steel making (BOS and EAF), secondary steel making, continuous casting and rolling and tube manufacture.
00:00 Logo
00:23 Introduction
01:04 Steel Manufacturing Overview
02:10 Iron Ore
03:42 Blast Furnace (Iron Making)
05:43 Basic Oxygen Steel Making (BOS)
07:48 Electric Arc Furnace (Steel Making)
09:54 Secondary Steel Making
10:37 Continuous Casting
12:12 Hot Rolling
14:50 Cold Rolling
15:32 Tube Manufacturing
16:26 Summary
Subscribe - th-cam.com/users/MetallurgyDa...
Video Courtesy of Corus
#SteelManufacturing #Steel #BlastFurnace #BOS - วิทยาศาสตร์และเทคโนโลยี
Just want you to know my 2 year old is obsessed with "hot metal factories" and this is his favorite video in the world. We have watched this literally dozens of times.......thanks for making this. Please make a sequel.
I wish your child the best and think it's magnificent that he's that obsessed. Feed his interest and maybe even line up a time to visit one if the time is ever right... Cheers mate. Made me smile when I read your comment :)
Haha! That put a huge smile on my face! You have a great kid! Thanks for sharing :)
METALLURGY FULL VIDEOS th-cam.com/channels/5zGSn-svPs9QETPcYMAOzg.html
Good for him and good for you encouraging him.
Good for him, little guy will be managing a steel plant someday :). God bless you dad and son
This video is one of the few that actually shows & explains how the molten steel gets out and formed into cont billets. This process always had me wondering.
Just amazing to watch
good
reece
I worked for Alberta Steel. Just being in a furnace coat was horrid at times.....somedays I was so exhausted at the end of the day I barely made it to the car
In the early 70s I started into industrial electrical maintenance as a Motor Inspector at Colorado Fuel & Iron (CF&I) in Pueblo, Colorado. I 'floated' as a Motor Inspector in over half the mills there. It was very interesting. Imagine watching steel rail being rolled by a 22,500 horsepower steam engine, largest west of the Mississippi River. At night the sky would light up when they were pouring skulls from the ladles. i started out as labor in the Open Hearth and moved into being a Motor Inspector, which was a maintenance electrician.
Awesome story!! I always drive past that place in Pueblo! 🙂
Was it hot everywhere there when they worked?? I bet
3 year of metallurgy lectures in 18mins.
Exactly
EVRAZ group of Russia 🇷🇺 in Chicago Illinois USA 🇺🇸 tooooT ToooT
EVRAZ Portland Oregon has tracks to Moscow Russia 🇷🇺 since 2007 HoTT Topics of Debate de RaiL CamPain TraiL BoSS EVRAZ
th-cam.com/video/xFhQ3Ybqtf8/w-d-xo.html
Download vtube sekarang juga😎,
Ragumu rugimu.😎🤙💪
Wonderful, in the eighty years, I have worked at the metallurgy laboratory of SOLLAC Florange ! 👀👍🇺🇸🇺🇸🇺🇸
Working in a.steel mill from 19 to 38 in is a amazing job ! There no other job like it ! M/S & the 95% loss of mobility in my legs took me from my job there ! Miss those guys & loved that job ! 😢
I’m really sorry about ms taking away your passion do you still have contact with the guys you had when you were working
Ms might of taken away your mobility but it hasn’t taken away the love for the job you adored
I’m sorry man. I salute you for all the hard work you did. Never give up, life still goes on and be proud of what you have accomplished
Great documentary. Modern processes, but old fashioned documentary with actual technical information. Kudos to Corus.
Great work and great editing to bring the process of steel making so clear and compact. Kudos!
I've seen an EAF in person; it is truly an astonishing process.
The sound it makes gets annoying after a 8 hour shift, trust me lol
Very educational. Thanks for showing us the mysteries of steel making.
Hello 👋 sir I'm zain Khan from Pakistan in Karachi I'm Iran steel master
I request please
very vivid presentation of how steel is made, thanks
Every thing is used, nothing wasted. Awesome video indeed. Human creativity rules.
I’m learning engineering materials and this vids really helped me.
Thank you for your work.
That was the best video I’ve watched in ages. Couldn’t stop watching. Doing a metalwork course right now. God it’s all so interesting
Best of luck to you! (though you may already be done) I am watching this for a metallurgy class in my welding program.
very good video, clearly explained the process of steel making. thanks for sharing
This video is really dived into the steel making process, it's graph demo show clear how's casting detail. Although the chemical formula we already knows. thanks for the graphic demo explanation.
I’ve worked in every steel mill between Pittsburgh and Chicago as a union ironworker and I’ve never seen a steel mill that clean. Twenty- seven years in and out of every part of them, and I still wonder what mr. Bessemer was thinking when he saw the violent stuff going on and said, “ yes perfect, just what I was expecting!”
Chutiya
Ever work for ATI here in Pittsburgh?
Probably because that's a newer European facility. Most of the mills around the 'Burgh were built in the early 1900's and are pretty damn filthy compared to what's shown in the video.
Did you ever work at Bethlehem Steel in Baltimore ?
@@odradekfilms never made it to Baltimore
By far the most educational video on the process of steel.
hi A P...
'
some vehicles are most useing aluminums
Chitiyaa
This Video is Excellent I didn't know the different processes that go into manufacturing Steel.
T
thanks for this video, good content and useful information on steel making!
Perfect Tutorial. Thanks.
Thank you and God that youchose to spread your knowledge.
Really did an incredible job on this video. Thank you.
Very Nice explanation. Keep up the good work!!
Very well explained. Thank you!
this is marvelous, i learnt a lot from this video demonstration.
That was AMAZING. So glad to learn. I watched it with my 3yr old. Cuz he wanted to know. #subscribed ✅🙂❤️👍
Very nice information about Steel Making Process. Thanks.
thank you to explain clearly about making steel, it's helpful for me when i need to search sth bout making stainlesssteel. Thankyou somuch
very insightful video. learned a lot!
I get to see it everyday. Awesome. Cleveland Cliffs love this job and we are hiring. 8/21.
Steels in aircraft are primarily specialized aerospace grade 304 Stainless steels and Inconel stainless steel. These steels are what makes a jet engine or turboshaft engine. 304 stainless makes up almost 75% of a jet engine turbo core. Inconel makes up 25%and is used in the rear turbine of the jet engine. Inconel is monocrystaline high temperature steel that rivals titanium, and tungsten for dimensional and strength stability at extreme temperatures. Inconel is so good it's replacing tungsten for rocket engine parts. SpaceX is building the world's largest rocket called Starship and it's being made out of a proprietary grade of 304 stainless steel.
EEERRR !!!?? CONCORDE ! MARK ! TWO !!???
dude the sound effect used in the chapter transitions is like a sound i've never heard before in my life , idk how to explain it
If you like this, you're going to love the Risk of Rain soundtrack. It sounds EXACTLY like this.
The beats on this vid are next level, homes
Usw 1014 south blast furnaces at Gary works here, love the video
Amazing !!!..searching for these kind of videos.
loved it very much..
Very clear and inspiring video 👍👍
Steel making methodology well explained, good graphics precise and to the point . Kudos! , we do offer low cost fuel for foundry by the way. Reduces the furnace costs to upto 40 percent
Excellent video!
refreshing my memory after working in an eaf and cc for 20+ years. Qatar Steel
th-cam.com/video/xFhQ3Ybqtf8/w-d-xo.html
Makes you wonder how they made steel before computers. The technology is so interesting.
There are old documentaries from the 30s to the 50s showing the"old" ways.
Nice video and good narrator thank you
Leaning casting process ❤
Great educational video!
Wonderful this video is just wonderful
Steel is so important!!
Learned a lot !
Amazing and great .... seen this video 3 to 4 times 👌
Best channel for me
Super video thanks 🙏
Informative video , thanks
Excellent video. 10/10. (28.6.21)
I studied all this in high school back in the 60s .
Sir your memory is really sharp you remembered at least that you have read this topic
How may years of old are you now?
I guess 80
@@sanatani4244 Wrong by 6 years !
Very nice information about steel
Good presentation and video
very informative
the sintering process is to make pellets out of that ore... in order to have the hot air flow thru that stuff, so that CO can reach that FeO and get the O in order to produce CO2 and FE2 so you can have your molten metal...
otherwise you jsut have a layer of iron ore (FeO) and nothings gets thru.
the oxygen is not removed coz it's hot in the blast furnace...
pls explain it correct, or not at all
Very good and clear! So they cannot make pipes continuously like they make sheets, because the poker that pokes the hole must be fastened at one end, it can only pierce billets of finite length. Is that right?
Hi, yes that’s correct
Thank you this was very helpful!
Chutiya
Great video
I'm wondering if the heat from the cooling of the finished product is used. It doesn't looks like it is here but it could be, hard to tell. But with some heat exchangers or even turbines, it could be a good way to gain energy efficiency.
I'm sure many engineers already thought about it and made calculations on that. If it's worth it, it probably already exists.
what is the background music. I really love it. Usually, music that comes along with manufacturing are pretty cool .
TOTALLY INCOMPLETE EXPLANATIONS AND TOTALLY AND UTTERLY USELESS VIDEOS. The 1970s and 1960s educational videos are far more highly informative, highly explanatory, highly illustrous, and highly detailed on a step-by-step basis so as to raise interest among the young to encourage them to become metallugical engineers, electrical engineers, mechanical engineers, master machinists machine tool specialists, chemical engineers, mining engineers, geologists, civil engineers, "THE WORKS" and what have you!
Benjamin Gutierrez
1 month ago
Song is: Slick Roller by Dataflow Productions
great video
that soundtrack is fire!!
Muito bom documentario¹
Song is: Slick Roller by Dataflow Productions
th-cam.com/video/xFhQ3Ybqtf8/w-d-xo.html
oh thanks man! the strings on this is amazing!
Chutiya
So nice this video ！
thank you so much
Nice content loved this job
yooo whats this intro song? I didn't come here to be rocking my body back and forth but im here for it!
same bruh it sounds so familiar
th-cam.com/video/iNzu0d6M1FA/w-d-xo.html
found the channel that i remembered it from
Very cool
Nice!
Well ... that was fun.
I worked in the hot end of the last fully integrated steel mill west of the Misissippi river.
Geneva Steel?
@@WAL_DC-6B yes
Any objects still made out of iron ?
Or is it turned into steel first then the
various objects
made from the steel ?
Good documentary²
How does one get started in opening a steel production plant? Any help would be appreciated
Start with HSM , Go towards CRM , when you have enough profits , you can go for EAF /scrap route or BOF/blast furnace route if you have more money
Awesome
wow. great!
Steel is your friend.
That was great
I use too work in a foundry. Thanks for the video
This video is AMAZING
Good. keep it up
amazing
like it a lot
I’m just wondering how do they maintain they heavy equipment
good job!
just wondering how they made the equipment to make the steel
Modern civilization starts there.
Can I ask a question about coke making. When you heat the coal how come it doesn't burn to ash. Apologies if that's a dumb question but it's something that I'm curious about
Hi, the coal is heated in an air tight oven, so oxygen is excluded (a good comparison is to how charcoal is made) and thus the coal is heated but not burned, the volatile matter is driven off, leaving coke.
When coking coal is analysed in the laboratory (or it used to be) one of the analyses performed is for the ash content. So Volatile Matter and Ash are the two significant components of the final product. Ash can be analysed on a spectrometer to determine conformance as an end use product. Coke remains very brittle to compensate for the handling in the transfer to the BF where large lumps are desirable for fluidity of the raw materials.
Great✌️
If you ever wanted to see hell on earth work in in a steel mill where they have electric arc furnaces in the steel making dept., it'll be the hottest,filthiest, and loudest place imaginable,with 3 running at a time ,did ten years in one right out of school and seen and heard of more men hurt ,burnt and crippled and killed then I care to remember. Back in the 70's safety and safety meetings were unheard of at Bethlehem Steel Steelton PA.
Your not wrong there mate I have worked in both types of plant in South Wales and both are horrible places.I’ve heard about people being killed but never been close when it’s happened thankfully. Unfortunately you can only imagine what it would be like working in plants that are in eastern countries where work force or the environment have little consideration we are supposed to be advanced countries and the conditions for us is bad enough but as always you get what you pay for and cheap steel comes at a price be it the payed by the people that work there the environment or both as with all work places I take the view you are in charge of your own safety and look after your self if you find the grim reaper is getting to close best go work elsewhere. Some of these places run out of people so they slowly increase wages to tempt people back and keep working but there’s no point being the richest man in the graveyard.stay safe there’s no second prize in this game
The dislikes are from people who like aluminum.
Well done, but the direct reduction process should be - at least - mentioned.
I like it
i knew there was quite a bit of work; but i didn`t even have a clue. Grandfather and Great -Grandfather were Steel workers.
3:48 that's at port talbot steelworks in Wales, blast furnace number 5
Are there alternatives to using coke? I've heard of using hydrogen injection instead, is that viable?
The oxygen in the hot blast combines with the carbon in the coke to form carbon monoxide . Carbon monoxide is the primary reduction agent in the blast furnace. The carbon monoxide combines with the oxygen in the ore to form high carbon iron or pig iron. The carbon monoxide and the carbon dioxide created in the furnace are recycled into the hot blast stoves as a fuel to heat the cold blast. ...so no.
Scrap doesn't need to be reduced so they use electricity. Oddly enough, they use oxygen to remove the excess carbon from the pig iron in the BOF.
Hydrogen can make steel brittle. Arc welding rod must be free of water and moisture because the electric arc generates hydrogen which will make the weld brittle.
@@frphxkaboom3008 BF molten Iron (hot metal) and Pig Iron are two different things. Pig Iron is a product of hot metal when the latter is cast in a Pig Mill. This can also be done by casting the HM into sand moulds but metal moulds are resuable and the Pigs are removed on cooling. It is covered partially in this very good video.
As it states the majority of HM is used in the BOF but in bygone times when needed some HM could be transferred to a Pig Mill for processing. Beneficial for transportation and also for remelting in Foundaries.
Think of the volume of CO2 that goes up the stack when 300 or so tonnes of HM at 4.0% C is reduced to steel with 0.10% C
@@flamingfrancis It's the exact same metal. and the words are used interchangeably. . I worked in a pig cast. and blast furnace and the bof and the caster and electrics.
Upvote for the trackball
13:04 : pure steampunk machinery