I just use linseed oil or mineral oil and apply 2 coats…on the second coat of the oils and while it’s still wet, I just apply cheap $1 Store superglue because it it very liquidy…..it dries in 15 minutes and 2 coats of the glue it’s smooth and usually don’t need to sand at all…been doing this for 20 years
You got me to start ca, thanks
thanks Captain Eddie. See you at SWAT.
I thought this was going to be a quick finish. I'm not so sure now, but I will give it a try.
I just found your channel today. Thanks for sharing and new supporter here.
Thanks Sioconian Jojo. Our club has posted over 80 videos and I hope you like the others as well.
Try putting a small gauge blunt hypodermic needle on the CA nozzle. Then if/when it clogs, you can heat it with a butane lighter to clear the clog.
thanks for that tip, I will pass it along to the others.
Good use of those safety glasses.
Glad you like them!
I just use linseed oil or mineral oil and apply 2 coats…on the second coat of the oils and while it’s still wet, I just apply cheap $1 Store superglue because it it very liquidy…..it dries in 15 minutes and 2 coats of the glue it’s smooth and usually don’t need to sand at all…been doing this for 20 years
Does this actually work?
Great info, thank you! Where can I get the materials to make the accelerator you mentioned?
is it the thin ca
Left after the first black screen - then there's a guy with his hat on backwards - indoors.
Does anyone know where to get the Aromatic Amines that Alan adds to the gallon of acetone. Thanks
Is the CA finish that was used on this video food safe?
I don't believe it is food safe because it could chip off in use. Better to use mineral oil or Mahoney's oil for that.
@@alamowoodturners hey thanks for the info. it was real helpful
@@chrisshaw3970 Glad you found it useful.
@@alamowoodturners hey thanks for the info
YAK IF YOU LIKE PLASTIC BOWLS
Need a fan or a vac it stinks bad 😂😂😂😂