it cant heard the click sound during installation due to the C-clip of the axle shaft little bit soft.You can see the shaft if fully seated if the dust seal and the oil seal zero gap.
I just removed my old broken in half differential and installed a used one with decent mileage but kept the old axels because it was all intact but when I put the car in Drive the drive shaft only spins and the back wheels won't go anywhere 0 noise coming from the differential and zero wear on the drive shaft I also flicked the switch on the transmission and topped off the fluid .. What did I do wrong ? The transmission was in perfect shifting order when the differential broke so I doubt it's a transmission slip any help?
May be the drive shaft won't fit in the differential side gears spline both side. Can you check and compare the old parts may be there're different tooth.
use 21mm combination wrench and loose it evenly in both side while pushing out the diff.so that the bolt will not touch it to the body.you cant remove the bolts unless you pull it out the complete rear cross-member
nong mga nkaraang buwan nag palit din ako ng diff ng Corvette kase maingay eh walang separate parts palit buo narin sya... kaso hindi ko na videohan sayang...
Hi new friend keep vlogging pa ng about sa cars
Wow naman kaibigan. Super gara naman ng mga sasakyan dito.
Hello 🙋
Video 👍 good
My friend🤝👌
galing nyo naman idol.
ganda naman ng car color red keep vlogging po here my key ..
What type of wrench did you use to get the 21mm and 15mm bolts out? The spacing is kind of tight
wow talented galing po kay nashyumi tv
ang cool naman kabilis lang nabaklas yung differential. iba lang talaga pag professional ang kumana.
maraming salamat kapatid kung magbabalik ka.
magandang skill po ang kumukumpuni ng sasakyan malaki laki din ang kita ang pagiging auto expert
new friend po tnx in return
Redcar..sending my support team karlosboi vlog
Ganda ng car, favorite color ko din yan.. ingat sa work po!!
Wow amazing blog.. Nice vlog..
Yan din po ang hilig ko sa mechanic po..
Ang ganda Ng ilamlim nia hndi p gaanong bogbog..
super nice the color of the car thats my favorite color, keep vlogging and sharing
Nice car.Love the color dear.
Keep on Vlogging po.. More power to your channel po
Ganda naman po ng cgalanger car ang bilis kaya nyan kasing bilis ng pagiwan nya sa akin huhuhu
I just performed the swap. But cant get the axles to fully click in. Any good advise???
it cant heard the click sound during installation due to the C-clip of the axle shaft little bit soft.You can see the shaft if fully seated if the dust seal and the oil seal zero gap.
Ganda ng red car kinis kinis ahah
Ganda ng car sana all from zhyams vloh
Nice car enjoy vids sir
watching from jeddah
Gandang car.ang pagkared cool..god bless you Warren.keep safe.
Ang galing galing naman po sissy vlog
Nice car and color kapatid..thanks for sharing
wow salamat sa pag bahagi idol
Ang galing naman po keep safe po kau sa work.
Super impressive keep it up more power po keep safe and god bless po
Hi new friend here sending my full support, god bless
Great quality heavy equipment look expensive
I just removed my old broken in half differential and installed a used one with decent mileage but kept the old axels because it was all intact but when I put the car in Drive the drive shaft only spins and the back wheels won't go anywhere 0 noise coming from the differential and zero wear on the drive shaft I also flicked the switch on the transmission and topped off the fluid .. What did I do wrong ? The transmission was in perfect shifting order when the differential broke so I doubt it's a transmission slip any help?
May be the drive shaft won't fit in the differential side gears spline both side. Can you check and compare the old parts may be there're different tooth.
What charger is this rt or a scatpack I’ll be doing this here soon im my scat and wondering if this is the same process
Thats 2018 model, but 2008 at present model its a same process to replace rear diff.
@@warrengalaroza1812 thank you sir I got a 2017 rt scat need to do this on
What a cool red car and I love the interior
Keep safe po idol keep vlogging
Keep it up po
Saan bansa kau sir?
Ok so how did you remove those 21 mm bolts? Because I can’t get any of my tools to fit on the socket due to how tight that space is.
use 21mm combination wrench and loose it evenly in both side while pushing out the diff.so that the bolt will not touch it to the body.you cant remove the bolts unless you pull it out the complete rear cross-member
Thats really hard job extra careful keep safe
that it is true in a garage with complete and state of the art equipment
I love the red color for cars but sometimes insurance charge more if your car is red
thats a myth
No tf they dont 😂 the didnt even ask me my color
Automotive din po ako ehh.. Helper mechanic po
I like the color of the car.
wow, that's real mechanic skills idol, hope i can also learn how to do it, im also interested in machines and mechanics
#Lyzee
How much?
God bless po
Red car..#gwapamae
wow
Thank you so much bro
Mekaniko k ata..o may ari ng sasakyan?
mekaniko po lodz..naka cnnct na ako sayo.
nong mga nkaraang buwan nag palit din ako ng diff ng Corvette kase maingay eh walang separate parts palit buo narin sya... kaso hindi ko na videohan sayang...
nako sayang nmn pera na sana yon hehehe.
@@warrengalaroza1812 hehe uunga eh
ayus war anong sira nyan diff?
noise ralp pero mahina lng .
Its Good to have a lift!
Mhirap cguro mag tanggal nyan
i dont believe ant of it funny how both axels just disappeared lol
45 mins if you have power tools and a lift, about 5 hours if you do everything by hand like i just did