I know right. They casted a final drive that houses a reduction set of gears.They dont even show the complete process of manufacturing of this housing. Im so dissapointed.
This video is a little deceptive. The replacement part that was installed on the tractor is not the one that was cast in the foundry. It's like they spliced two entirely unrelated videos together. I am willing to bet that the part that was installed on the machine is actually a genuine part that came from the manufacturer and not some part they went and manufactured on the fly.
Typical of these videos. Deceiving and highly edited. Like how every one is sped up to look like they are working fast. Yet they have everyone fooled about how great they are. 90% of what they do is hack shit! I don't care what limitations they have.
cmon. couple litres of oil and other crap. next rain will wash it into the river which are poisoned bejond anything already. so additional harm was done.
I think that last quite a while specially that brand new axle housing along with the new shaft and all new bearings I'm glad no one got hurt especially having to work in traffic well done
These guys are amazing were turn scrap metal into something needed they are careful selecting right metal needed for the job not many would work in such conditions good on them 👍👍👍👍
The left-hand wheel was at a jauny angle, too. It seemed to fix itself before the tests drive ! A lot of milling of another random trumpet housing was included in the video?
There is no suspension, so with a broken rear axle, it will lift up the opposite corner. Just like at the end of the video when they overload the rear, the front lifts off the ground.
@@Happyfacehotwheels If you look more closely at the beginning the the left hand rear wheel was at an angle to the rear axle, it looks like the wheel itself was bent.
You are really merciless! No matter what 😮, you fix it. Excellent! 👍👍👍 Every fool can throw it away. But your customers don’t know a pardon either. The technology is permanently loaded until the break. >Even if the tractor is raised, something still fits on the trailer...😉
I just watched the factory assembling this MF385 model and I'm not surprised they break (so easy)! I'm sure the foundries are not on standby to cast them. Plus, the housing they're molding is not the one that broke. And this i've been seeing more and more on these videos. Yesterday, they showed a rounded blade installed, but they were molding a square unit...why not just mold the part your replacing, more continuity if you did...with their chemistry control, every part is a different composition...and datum points, do they have any, or just machine and hope for the best?
Прошлое видео, тот же самый жадный дедушка Конкуренция большая, платят копейки, возьмёт меньше - не позовут больше Отсюда все эти перегрузы, адские трёхслойные рамы, полметровые в высоту рессоры
Hollywood's been doing it right along & we accept it. The stuntman is not the star; the pristine vehicle is not the car that gets trashed. Mind you, they should have edited the video a bit closer. The sand casting scene, though very instructive, was of a part entirely different than the one installed on the tractor.
Son dos cajoneras de distintos tractores Massey y Ferguson tiene reductora planetaria en la punta de eje o palier y la que maquinaria es con reductor a engranaje recto son dos cosas totalmente distintas
That tractor will break again, that final drive casting is not meant to have so much weight on it constantly. If your tractor has issues keeping the front wheels on the ground then it's over loaded in the back, too bad they don't have a large dolly axle for the front of the trailer so the weight will be on it and not the tractor. I guess over there they don't have any other options.
There lucky that they don’t have e,p,a or work o,h,s over there,I understand why everything is going of shore in Australian factory,in Australian our o,h,s and e,p,a is on our back for the slightest rule we break,plus fines $$$$ and labour cost.
Basically the broken part at the beginning of the video is what was poured out and the part in the last video is from the company. Don't post a misleading video
ces tracteurs ne sont pas fait pour porter des surcharges pareil constamment en équilibre sur le pont arrière l'avant levé ! une casse de trompette , du jamais vu en FRANCE !
Every tractor has max load on rear axle that it will hold. You put on more and something will break. I wonder if they know that. Which is it more profitable: to overload heavy machinery all the time and wait for something to break? Or to work within weight limits for long years without major failure? Yes, they can reinforce frames or add more leafsprings but then there are things that can't be reinforced like bearings, shafts or axles as a whole. I guess different country, different people, different technical approach.
the replaced part is totaly diferent than the part they cast. The part and the axel are new and they just replace them in the road. 😉😉
I know right. They casted a final drive that houses a reduction set of gears.They dont even show the complete process of manufacturing of this housing. Im so dissapointed.
It would bother me more that they have molds to cast the tractor parts. How many rear end housings do they break?
Its a Massey that is made in India. They just got a new one from the dealer and bolted it in.
Between all the welding they do in the lathes and dragging heavy cast parts on the ways its no wonder those lathes are so beat
It looked used to me.
with such a trailer the tractor will break down again...
ثلالل
Never seen a tractor do wheelies before 😂
They have no other tractors for working
@@h.n.5884 you understand that the problem is in the 4-wheel trailer, it is necessary that there is no load on the tractor!
@@ALTXP I think the problem is not 1 or 2 axle the problem is overload the trailer
Even they realise it's pointless fitting the wrong part they cast, so they fitted a correct genuine one
Notice how carefully the scrap ìs graded to produce the finest quality casting.
It would be interesting to know what that casting was for though...
Oh, yeah...
I especially like the way he hammered the axle shaft into place the last couple inches
This video is a little deceptive. The replacement part that was installed on the tractor is not the one that was cast in the foundry. It's like they spliced two entirely unrelated videos together. I am willing to bet that the part that was installed on the machine is actually a genuine part that came from the manufacturer and not some part they went and manufactured on the fly.
Yes you can tell by the cast numbers on the side!!
Typical of these videos. Deceiving and highly edited. Like how every one is sped up to look like they are working fast. Yet they have everyone fooled about how great they are. 90% of what they do is hack shit! I don't care what limitations they have.
These guys arent afraid to tackel any mechanical task. More power to em.
I especially like the attention to the environment. 😅
cmon. couple litres of oil and other crap. next rain will wash it into the river which are poisoned bejond anything already. so additional harm was done.
Даже на выплавке чугуна парень в тапочках , где бы такие тапочки купить 😅
Looks fairly new, shouldcheck the warranty!😂😂😂
I think that last quite a while specially that brand new axle housing along with the new shaft and all new bearings I'm glad no one got hurt especially having to work in traffic well done
These guys are amazing were turn scrap metal into something needed they are careful selecting right metal needed for the job not many would work in such conditions good on them 👍👍👍👍
The left-hand wheel was at a jauny angle, too. It seemed to fix itself before the tests drive !
A lot of milling of another random trumpet housing was included in the video?
There is no suspension, so with a broken rear axle, it will lift up the opposite corner. Just like at the end of the video when they overload the rear, the front lifts off the ground.
@@Happyfacehotwheels If you look more closely at the beginning the the left hand rear wheel was at an angle to the rear axle, it looks like the wheel itself was bent.
@@ferrumignis You're right, I thought he was talking about the front wheel. It definitely looks bent.
You are really merciless! No matter what 😮, you fix it. Excellent! 👍👍👍 Every fool can throw it away. But your customers don’t know a pardon either. The technology is permanently loaded until the break. >Even if the tractor is raised, something still fits on the trailer...😉
Here we go again, fresh from the repair, overloaded 3 times, ready scheduled for next repair. I really don't comprehend this mentality.. 🤔
It's very strange. You'd think they try to look after the machines they earn their living from, but they just abuse them until they break.
Those boys breaking up the scrap metal earn there pay (if thay get any)😂😂😂😂
مع مثل هذا الشباب لايوجد مستحيل الله يوفقكم
Dump all the gear oil all over the road why don't you!!!!!
Well it came from under the ground. Some places it seeps to the surface, that’s how oil was discovered anyway.
Keeps heel dust down.
Чудеса творят на допотопных станках !!
Great ad for Indian made Massey (Millat) Tractors.
If something is used in india. All the strength values should be doubled. It probably broke the inside shaft first then dropped and broke the casting
Pakistan Not Indian
As a Indian we use original material not the casted one
That tractor looks brand new
I can't imagine why that axle assembly snapped.
Durch Extrem hohe Belastung durch extrem beladene Anhänger! Das hält kein Traktor aus! Aber die Leute machen immer so weiter!😅
😂😂😂
Trator é pra puxar peso,
Não pra carregar tanto peso.
É questão de tempo, pra quebrar novamente.
It hitted the footpath
I had to replace an axle housing on a MF 690 where a citroen car hit the front of the rear tyre. It broke in a similar place to the one in the video.
Hitted ????????????? Very resourceful, and brave (maybe) to do it in the middle of the road
It is incredible how the mechanics/engineers restored the tractor on the highway! But is that load worth the cost?
What was it? Can't be worth much judging by how fully loaded it was.
@@benjamincresswell3713 I believe it is sugar can enroute to the factory
It's always more important to get that overload than get 30-50years work out of the tractor without destroying it.
Das Teil das die gegossen haben,ist nicht das neue Teil,das die eingebaut haben!😅
ich denke die wollten nur zeigen das es möglich wäre
ورب الكعبة انتم عمالقة مبدعين. ارفع لكم القبعة. حفظكم الله و رعاكم.
تحياتي من المملكة المغربية. ❤❤❤
Whats with showing the casting of a completely different housing in between dissasembly and reassembly?
SOU DE POPULINA INTERIOR DE SÃO PAULO BRASIL , SOU FÃ DO TRABALHO DE VOCÊS , PARABÉNS
4:50 песок и грязь в редукторе им помогут🤣🤣🤣🤣
Ja ! Aber die Werkstatt bekommt dann wieder Arbeit!!😅
I just watched the factory assembling this MF385 model and I'm not surprised they break (so easy)! I'm sure the foundries are not on standby to cast them. Plus, the housing they're molding is not the one that broke. And this i've been seeing more and more on these videos. Yesterday, they showed a rounded blade installed, but they were molding a square unit...why not just mold the part your replacing, more continuity if you did...with their chemistry control, every part is a different composition...and datum points, do they have any, or just machine and hope for the best?
Love the fact they can fix anything anywhere ❤
Pakistan would be an amazing place to visit 😊
It's a fookin shithole.
At 16:30 I was thinking "loosen the lows and tighten the highs" 😅
If you won a big lottery prize and financed a wrecker -towing company over there would you go broke or get rich??
broke ..............nobody able to pay for their services .............. is more cost effective to fix at the roadside ......
Ok the foundry part was wrong but it gives people an idea of how the replacement parts are made ,great work guys ❤
16:40 опять всё работы резьбовым резцом 🤣🤣🤣🤣
Зачем больше, если и так всё получается)))
Ну нормально они специально его грузят так чтобы он сломался!
Прошлое видео, тот же самый жадный дедушка
Конкуренция большая, платят копейки, возьмёт меньше - не позовут больше
Отсюда все эти перегрузы, адские трёхслойные рамы, полметровые в высоту рессоры
Да не., это просто чулок не из чугуна а из глины))
Nice oil catch system. Right back to the Earth it came from.
It broke again, just a few meters down the busy road.
love it when they just put rusty old bolts back in with no anti seize or lube. like fingers on the caulk board.
If they cleaned & lubed those bolts they would be easier to remove next time. At the way they overloaded the tractor it might be quite soon.
Это не та отливка , которую они установили!
ใช่😅
Тоже заметил
Good on them for having a go at casting a new one …..wish it worked out .
How did they make the positive for the mold? Did they already have one? Interesting that they skipped that part.
That must be a part they make a lot of so they already had it ready to go, but the part they cast wast the one they installed in the tractor.
Hats off for the roadside repair the other blokes may not be able to drive very well,,,,,,,,,,,,,,,,,,,,, but they know how to blow their horns.
You get some good jobs you lads aye. Love the vids you do.
Love the safety boots the guy with the hammer
Never learn just keep over loading it and it will just go again think he is making more money by over loading (milking it)
Weniger Laden,dann verdient er mehr,weil keine Reperatur!
Hello mate fancy seeing you here 🫡 apparently it hitted a path
@@Professional-struggler Ain't this one for the book Chris 😬
You are right young man, The weight for Tractors. TRUCKS is unlimited ,
I think they are faking it. The part they put on is not the same as the one they casted.
The painted red (Glyptal) part is factory.
your right they did 🙂
Yep, this was fake as hell! Not the same part at all.
Hollywood's been doing it right along & we accept it. The stuntman is not the star; the pristine vehicle is not the car that gets trashed. Mind you, they should have edited the video a bit closer. The sand casting scene, though very instructive, was of a part entirely different than the one installed on the tractor.
This is hilarious! Its like watching a Mad Max movie!
Great job gentlemen
No lock washers, thread locker, or torque wrench needed!
These are highly skilled workers !
They don't even have a ratchet.
@@bigredc222 It appears that they don't Harbor Freight stores where they can buy tools.
No oil in the epicyclic hub either.
Vocês são muito entelijente
Helal olsun usta dediğin her şartta işini görebilmeli zevkle seyrettim türkiyedenselamlar
Отличная работа!!!
Realy cool! That people works hard!!
Son dos cajoneras de distintos tractores Massey y Ferguson tiene reductora planetaria en la punta de eje o palier y la que maquinaria es con reductor a engranaje recto son dos cosas totalmente distintas
Des sacrés bosseurs.
Over loading and busting stuff must be a viable business model over there.
If this was in England the police, fire brigade, army Navy and RAF all jumping up and down and wanting it moved off the motorway to a garage.
Православной иконки не было на панели
ВОТ и результат 😮
😊😅😂
Они скорее индуисты им надо фигурку Шивы с головой как у собачки киваки тогда точняк сработает😂😂😂
Son increíbles,hacen todo. Es la necesidad que tienen de ingeniárselas. Pero también es un peligro todo.
Jobs a pain without someone filming you 😅
5:52 это надо выбросить и поставить всё новое!
الووو حبيب الووووووووو فقدانك نار كىف تحس
Just dump the oil in the road and work in the mess....... classic..
The title should be "Loaded Tractor Hit Footpath and the Rear Axle and Housing Broke. We Repaired It in the Emergency Lane"
Made it 200 more yards and the other side broke.
😂😂😂 no pos con esas cargas quien dura😂😂😂
What, no women demanding equal jobs and equal pay?
Wakodahatchee Chris
Prawdziwi magicy ! Mistrzowie !
Alles in allem seid ihr gute Monteure.Draußen und ohne Spezialwerkzeuge macht ihr einen tollen Job.Weiter so ....Männer.
Unreal now that’s getting it done.
Сколько смотрю подобные ролики , делаю вывод-у азиатов нет понятия весовой нагрузки,грузят-сколько влезет
good job from morroco
Poppin' wheelies and pulling huge overloaded wagons...
Very good ❤❤❤
OVERLOAD IT TO THE MAX! 👍
The axle tube was probably cast from a melted down boat chain
That tractor will break again, that final drive casting is not meant to have so much weight on it constantly. If your tractor has issues keeping the front wheels on the ground then it's over loaded in the back, too bad they don't have a large dolly axle for the front of the trailer so the weight will be on it and not the tractor. I guess over there they don't have any other options.
Estos hombres son super inteligentes
Nearly as clever as a rock infact.
Mükemmel🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷
There lucky that they don’t have e,p,a or work o,h,s over there,I understand why everything is going of shore in Australian factory,in Australian our o,h,s and e,p,a is on our back for the slightest rule we break,plus fines $$$$ and labour cost.
देख तेरे संसार की हालत क्या हो गई भगवान इतना बदल गया इंसान
सूरज न बदला चांद न बदला बद गया खुरुच मुरुच इन्सान,
🇺🇲🇵🇷🇲🇽😎 All with osha, approved sandals.😂
good job in the midddle of street
Así me gusta el aceite al suelo 😅😅
Selamlar, çalışma azminize bayılıyorum sizleri izlemek çok zevkli
Was it the locked differential that caused the drive axle to break during a sharp turn?
And then the axle smashed through the housing?
Get those boys some electric impact drivers! They deserve them
Messy fergosen da v pattha bitha ditta Milt Pakistan dy sasti taleem waly engineers ny
This tractor is made in Pakistan with old patents and there are endless cheap and good parts.
Isnt that supposed to be a big o ring where there wiping in the sealer
Эту деталь надо менять а не ремонтировать!
Very hard working job but pls use safety gloves
Basically the broken part at the beginning of the video is what was poured out and the part in the last video is from the company. Don't post a misleading video
I sure felt it was odd that the foundry just happened to have a pattern for the needed part.
The part they cast would have snapped instantly overloaded like that. Front wheels can't even stay on the ground LOL!
Have that done in the US. The part would well exceed the value of the tractor
ces tracteurs ne sont pas fait pour porter des surcharges pareil constamment en équilibre sur le pont arrière l'avant levé ! une casse de trompette , du jamais vu en FRANCE !
You should wear a mask when spray painting na forget it.
Every tractor has max load on rear axle that it will hold. You put on more and something will break. I wonder if they know that.
Which is it more profitable: to overload heavy machinery all the time and wait for something to break?
Or to work within weight limits for long years without major failure?
Yes, they can reinforce frames or add more leafsprings but then there are things that can't be reinforced like bearings, shafts or axles as a whole.
I guess different country, different people, different technical approach.
amazing , dumping the oil on te ground...
At the first lathe operation the operator was asked what sfpm he was turning that at and he replied" variable". 😂😂😂