I just did mine 😊😊😊... It was rejecting at some point but I didn't give up... In case you are having same issue, you might want to reboot your system and ensure your network is not interrupted.. I tried more than 6 times untill I rebooted this morning 🎉
Guys, anyone having issues with product key, please make sure your windows is pre activated with a genuine key ,then proceed with the installation. Or you will have this issue.
Followed these institutions and worked for me, 09/08/2024, only thing I did different was i chose to loose my Windows 7 and all files on drive, mega happy thanks.
When I right click on setup and click run as administrator, nothing happens. Any ideas? This is an old work laptop. Maybe there is some setting preventing it from running?
It worked just fine. I did have to use the power shell method afterwords. Thanks for showing this method. Are we able to run windows updates or leave those alone? After upgrading my audio is very choppy/stuttering..
I’m glad it worked, windows updates no issue. Uninstall/reinstall audio drivers in device manager or download audio drivers from the vendor and reinstall them.
its worked up until i run the program as an administrator it will open the setup software for a second then close it right after any ideas on what to do?
Its said " We couldn't install windows 10, We've set your PC back to the way it was right before you started installing windows 10 0x8007001F - 0x20006 The installation failed in the SAFE_OS phase with an error during REPLICATE_OC Operation"
@@Brandoncoolboy78 As you mentioned the minimum of 20 Gb should be free in C drive(main drive). I have 40 Gb free in C drive. But my installation file is on D drive.. will that be an issue..? Should I move files to the C drive before starting installation. THANKS IN ADVANCE 💐
@@bpsatish Maybe that will work, the update will have to install to your C drive. If theres anyway you can change it to that the update should work fine. Let me know if theres any problems.
So we just upgraded from Windows 7 to Windows 10, using the same original Windows 7 key? Can you do one for Windows 11? Since Windows 10 is also consider not the latest already?
Thank you so much for the detailed tutorial! I really want to try it, but I'm afraid to choose the language exactly... Could you please tell me how I can check the language of the edition of my computer?
Big thank you for this. I am upgrading my current laptop from HDD to SSD and upgraded the RAM, this was the one thing I had to do before all of this to be prepared. Thanks again, much appreciated.
I followed your steps, but this method did not work for me. Everything seemed fine with the installation until the very end. Then I got an error message that said, "The system registry contains invalid file paths. Installation cannot proceed. The system image was applied without guaranteeing that drive-letter assignment would match across computers". After that, any changes made to my computer are undone and my computer reverts back to Windows 7. Do you have any suggestions on what I should do?
That sounds like some issues with your registry etc, i would suggest repair install windows 7 first to fix the issues and then try upgrading it to windows 10.
I have been trying do this for the past 6 months or so due to never enough time, so if it works i shall leave a comment along with any special instructions that i might have had to do, as well as date & time stamp, thank you for the incite
You will need to backup your data and fresh install windows 10 64 bit. Windows 32bit to 64bit direct conversion not possible .Upgrading from the 32-bit version to the 64-bit version of Windows requires that you reformat your hard disk, install the 64-bit version of Windows, and then reinstall everything else that you had on your device.
Hi @vital tech helper, Thanks a lot for the explanation. I gone through video thoroughly. Steps worked till installation.. during installation failed with SAFE_OS phase with an error during replicate_OC operation. As you mentioned below removed all USB devices (mouse also) and cretae new admin profile and with the new admin profile tried to install, tough luck didn't work..after 15% installation sysmes says undoind chanhes made to your computer and failed with same SAFE_OS phase with an error during replicate_OC operation. Is there any fix i need to do please help in this🙏. Thanks in advance
Hi, there’s a solution in this thread for updating bios, please read and proceed carefully 👍 I take no responsibility if anything goes wrong so please be careful, thanks. www.reddit.com/r/WindowsHelp/comments/18nadn0/windows_update_error_installation_failed_in_safe/
Thanks a ton, this worked just fine upgrading from windows 7 pro. I did have to open powershell in admin and enter the line provided. that brought up the activation menu, selected option 1 and everything activated fine.
hey i want to know that you have opened the powershell and activated after the installation and upgrading of window 10 or before?????? please replyyyyy
@@arpitasingh6196 I activated it after the install after I got a message about activating it. If you think about it, it has to be after the install otherwise how would you activate something that isn't installed.
I followed the steps. But my activation status is shown as ""Windows is not activated". I could have installed a non activated version of windows on my own. Is there a way to upgrade an activated win7 PC to activated win10?
This is the way to upgrade and keep the activation but if it fails for you for some reasons then try the following: 1: try activating with the windows 7 key Or 2: run this in powershell and press option 1 for permanent activation: Powershell irm massgrave.dev/get | iex I hope this helps 👍
@@VitalTechHelperOption 1 didn't work for me. Option 2 did work although I don't understand how. After a few days, it's still activated. Working good. Thanks for the help.
At install I get this message. "We couldn't update the system reserved partition"? What am I doing wrong? I noticed a Microsoft office click-to-run drive that I thought was the "reserved partition", got rid of that but it still fails. Any help is greatly appreciated.
Hi mate , have a read at this and follow if you can at your own risk ⚠️ Its a quite complicated issue and not a straightforward one I am afraid: www.easeus.com/amp/partition-master/windows-10-could-not-update-system-reserved-partition.html
@@VitalTechHelper Great help! I actually deleted logs and that freed up some space too. Increasing the partition size will be my next step, but the current free space was increased by deleting the logs from original installation.
Thank you. I have a Dell Optiplex 3020 SFF desktop PC. It has a Windows 8 Pro sticker on the case, but it came with Windows 7 Pro. After the Windows 10 Pro upgrade, Windows 10 Pro still would not activate. I then ran the Powershell script that you mentioned multiple times in your answers below. Bingo. It worked. Thank you again. The question I have is if I replace the HDD with a SSD and do a new installation of Windows 10 Pro, will Windows 10 activate? I am not sure whether the Powershell script lets the Microsoft servers know about this PC.
After the activation of this machine , if you use microsoft user profile then the activation key get saved on the MS server. And when you decide to upgrade HDD/SSD and install windows 10 without key and just sign in with the same MS account, it will activate it. If all fails, just run the power shell again👍
Great video, worked well. My laptop seemed to hang at one point when restarting - then I realised I had a USB stick plugged in and my laptop was trying to boot from that first. I held down the power button until the machine went off, removed the USB stick, powered back on and it worked. :-)
@@VitalTechHelper The only thing I did find is that you can no longer activate Windows with the old Windows 7 product key. That said, it's no big deal, because everything still works, including all the Windows 10 updates.
i have a doubt in the first step after downloading the file what do we do?i dont clearly know anything abt laptop/computer programming so please kindly help
After converting from window 7 to window 10, the PC becomes very slow to opening the apps, files or software. Is there any tutorial for making the PC to run smoothly??
Hello, whenever i try doing step number two. 4:30 it wont run. it says something about a unknown publisher then it says " this installation requires windows x64" any idea what i could do to get this problem fixed? Thank you!
What is this powershell method that everyone is talking about? I wish that it is pinned as the first comment.🙏 @VitalTechHelper could you please help?
hello there! everything was working fine until when i tried downloading 7zip, it said: "error! This installation requires windowsx86" please help me fix this!
@@VitalTechHelper does that effect the performance of the computer? because i am upgrading it for the performance, a windows 7 32-bit does not run games very well, which is the reason i am upgrading it.
@@VitalTechHelper i did everything, it showed the windows 10 logo. but then windows restarted as windows 7 again. please help me because i was challenged to upgrade this computer an i cant lose a bet. please understand!
Three separate attempts following the instructions to a 'T' start to finish WITH an active WIN7 Pro product key still yielded "activation required". A complete waste of my time.
Sorry to hear it didn’t work for you but It works most of us. Try activating it with his method: PowerShell (Recommended) On Windows 8.1/10/11, right-click on the Windows start menu and select PowerShell or Terminal (Not CMD). Copy-paste the below code and press enter irm massgrave.dev/get | iex You will see the activation options, and follow onscreen instructions. That's all.
@@VitalTechHelper Doesn't that risk seizure of my Microsoft account and all its valuable assets? LOL Now THAT worked like a charm. Still seems a little shady, tho. Thank you.
Its not a simple upgrade from a 32bit os to a 64 bit os. Its a clean install , meaning backup everything and then wipe and install windows from scratch 👍
If your copy of windows 7 preactivated, then skip the key on installation step, once upgraded , it should auto activate. If not , in comments find an activation script.
this worked on my Windows 7 Lenovo laptop - definitely make sure NO devices are connected, including the mouse!! now I will reset to factory settings, install Avast anti-virus, internet...and I am good to go : )
I did the solution using a bootable usb it worked but when I restarted my laptop again it says a error couldn't find a operating system try dissconning..... Please help I can't use my laptop
it still working as today 9th April 2024 to my Dell Latitude E5440. Got the windows10 activation error pop up after i updated the windows10 itself, however i follow the powershell method as per your comment to Mike Thompson, it does activate the windows10 immediately. Thank You Very Much.
Thank you by the way I installed windows 8.1 instead! and my computer has 32x So I have to pick 32x bits by the way, I did not officially got the iso file from Microsoft
Many thanks first. However, it failed and showed: "0x8007001F - 0x20006 The installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation". Is there any method to fix? Many thanks,
Hi , two fixes you could try, first: make sure no external usb devices connected except your mouse and keyboard. 2nd : create a new admin user account and try upgrading from that account, could be a possible user profile issue.
Hi help please it says that the source isnt designed to run on windows or it contains an error. TRY installing the program again using the original installation media or contact your system administrator or the software vendor for support.
Try the following: Check you software Installations. endpoint protection or Security software blocking changes to system drivers. Remove it and try again And be some missing drivers on intel chip-set. Install all drivers
PLSS I NEED U!! when i click on setup.exe it tell me that the version of this file is not compatible with the version of windows you're running. how can i do?
Doesn't work for me idk how to Fix it, 6:07 at this time i waited so long and when its hundred percent its just go back to The windows 7 and its says we cannot Upgrade it to windows 10 and theres like 0x0000 something i don't remember the exact Thing that it said, How to fix it? Is it still possible to upgrade it? (need help)
Hi, it still works and many have successfully upgraded. I think you need to cleanup disk and check disk for any issues. Make sure uninstall any security softwares before the upgrade. Also, make sure no external storage or devices are connected to your pc. And restart before upgrade👍
Its said " We couldn't install windows 10, We've set your PC back to the way it was right before you started installing windows 10 0x8007001F - 0x20006 The installation failed in the SAFE_OS phase with an error during REPLICATE_OC Operation"
Can someone help? I try to do it and when it finishesit says " We couldn't install windows 10, We've set your PC back to the way it was right before you started installing windows 10 0x8007001F - 0x20006 The installation failed in the SAFE_OS phase with an error during REPLICATE_OC Operation"
Ok try this to activate it 👍 PowerShell (Recommended) On Windows 8.1/10/11, right-click on the Windows start menu and select PowerShell or Terminal (Not CMD). Copy-paste the below code and press enter irm massgrave.dev/get | iex You will see the activation options, and follow onscreen instructions. That's all.
After updating it shows "undoing changes made to your computer" then it back on window 7 again
I just did mine 😊😊😊... It was rejecting at some point but I didn't give up... In case you are having same issue, you might want to reboot your system and ensure your network is not interrupted.. I tried more than 6 times untill I rebooted this morning 🎉
"The network is not interrupted " do we need to connect to the internet during the installation process..?
Guys, anyone having issues with product key, please make sure your windows is pre activated with a genuine key ,then proceed with the installation. Or you will have this issue.
Followed these institutions and worked for me,
09/08/2024,
only thing I did different was i chose to loose my Windows 7 and all files on drive, mega happy thanks.
When I right click on setup and click run as administrator, nothing happens. Any ideas? This is an old work laptop. Maybe there is some setting preventing it from running?
Nevermind, it appears that it just takes a really long time. It is going through the setup now.
It worked just fine. I did have to use the power shell method afterwords. Thanks for showing this method. Are we able to run windows updates or leave those alone? After upgrading my audio is very choppy/stuttering..
I’m glad it worked, windows updates no issue. Uninstall/reinstall audio drivers in device manager or download audio drivers from the vendor and reinstall them.
Qual'e' il metodo Power Shell? Mi puoi indicare come fare?
its worked up until i run the program as an administrator it will open the setup software for a second then close it right after any ideas on what to do?
Its said " We couldn't install windows 10, We've set your PC back to the way it was right before you started installing windows
10
0x8007001F - 0x20006
The installation failed in the SAFE_OS phase with an error during REPLICATE_OC
Operation"
same
@@Jayhshshs I know how to fix it. Its because you need 20gb of free space on your main hard drive. Hope this helps!
@@Brandoncoolboy78 As you mentioned the minimum of 20 Gb should be free in C drive(main drive). I have 40 Gb free in C drive. But my installation file is on D drive.. will that be an issue..? Should I move files to the C drive before starting installation. THANKS IN ADVANCE 💐
@@bpsatish Maybe that will work, the update will have to install to your C drive. If theres anyway you can change it to that the update should work fine. Let me know if theres any problems.
So we just upgraded from Windows 7 to Windows 10, using the same original Windows 7 key?
Can you do one for Windows 11? Since Windows 10 is also consider not the latest already?
Thank you so much for the detailed tutorial! I really want to try it, but I'm afraid to choose the language exactly... Could you please tell me how I can check the language of the edition of my computer?
click your windows start button and search for "language"
Big thank you for this. I am upgrading my current laptop from HDD to SSD and upgraded the RAM, this was the one thing I had to do before all of this to be prepared. Thanks again, much appreciated.
Glad I could help!
I followed your steps, but this method did not work for me. Everything seemed fine with the installation until the very end. Then I got an error message that said, "The system registry contains invalid file paths. Installation cannot proceed. The system image was applied without guaranteeing that drive-letter assignment would match across computers". After that, any changes made to my computer are undone and my computer reverts back to Windows 7. Do you have any suggestions on what I should do?
That sounds like some issues with your registry etc, i would suggest repair install windows 7 first to fix the issues and then try upgrading it to windows 10.
@@VitalTechHelper Okay, thank you!
Great video, I love it!! Thank you for helping me ❤😊
You are welcome, glad to help❤️
I have been trying do this for the past 6 months or so due to never enough time, so if it works i shall leave a comment along with any special instructions that i might have had to do, as well as date & time stamp, thank you for the incite
did it work?
I followed your instructions and it worked flawlessly. Thank you very much!
I am glad it worked for you, please like and share. Thanks
Bs
Didn't work for me, almost at the end of it. Showing Windows 10 installation has failed. Why this please?
Omg I have the same problem have you found any soloutions
Thanks a lot, you have no idea how much time and troubles you just saved me ). Worked flawless from Win7 Ultimate to WIn 10 Pro. Liked and subscribed!
Appreciate it, glad to help❤️
What is Your pc bit?
32 or 64?
@@MrxXx-tb1dl 64
I have window 7 32bit but i want window 10 64bit and my mother board support 64bit so can i download window 10 64bit?
You will need to backup your data and fresh install windows 10 64 bit. Windows 32bit to 64bit direct conversion not possible .Upgrading from the 32-bit version to the 64-bit version of Windows requires that you reformat your hard disk, install the 64-bit version of Windows, and then reinstall everything else that you had on your device.
Mine will fail at 6:08 it says my PC run into trouble. Help me how can I fix that
Check disk, free up space , unplug any external devices and reboot before installing
Hi @vital tech helper, Thanks a lot for the explanation. I gone through video thoroughly. Steps worked till installation.. during installation failed with SAFE_OS phase with an error during replicate_OC operation.
As you mentioned below removed all USB devices (mouse also) and cretae new admin profile and with the new admin profile tried to install, tough luck didn't work..after 15% installation sysmes says undoind chanhes made to your computer and failed with same SAFE_OS phase with an error during replicate_OC operation. Is there any fix i need to do please help in this🙏.
Thanks in advance
Hi, there’s a solution in this thread for updating bios, please read and proceed carefully 👍 I take no responsibility if anything goes wrong so please be careful, thanks.
www.reddit.com/r/WindowsHelp/comments/18nadn0/windows_update_error_installation_failed_in_safe/
Thanks a ton, this worked just fine upgrading from windows 7 pro. I did have to open powershell in admin and enter the line provided. that brought up the activation menu, selected option 1 and everything activated fine.
I’m glad it worked, please like and share , Thanks
hey i want to know that you have opened the powershell and activated after the installation and upgrading of window 10 or before?????? please replyyyyy
@@arpitasingh6196 I activated it after the install after I got a message about activating it. If you think about it, it has to be after the install otherwise how would you activate something that isn't installed.
@@PeatyR umm yea sorry. it got activated thanjs
@@arpitasingh6196 no worries, glad it worked for you too!
Thank you ❤
I followed the steps. But my activation status is shown as ""Windows is not activated". I could have installed a non activated version of windows on my own. Is there a way to upgrade an activated win7 PC to activated win10?
This is the way to upgrade and keep the activation but if it fails for you for some reasons then try the following:
1: try activating with the windows 7 key
Or
2: run this in powershell and press option 1 for permanent activation:
Powershell
irm massgrave.dev/get | iex
I hope this helps 👍
@@VitalTechHelperOption 1 didn't work for me. Option 2 did work although I don't understand how. After a few days, it's still activated. Working good. Thanks for the help.
For me it hangs at 2 % during updates.
Can you help me?
It’s stuck at “making sure it’s ready to install” what do I do?
You can always quit and restart it, if taking too long👍
@@VitalTechHelper thanks, it’s working now
@@VitalTechHelper it says “Activate Windows” what do I do?
Worked like a charm for me. No issues
At install I get this message.
"We couldn't update the system reserved partition"? What am I doing wrong?
I noticed a Microsoft office click-to-run drive that I thought was the "reserved partition", got rid of that but it still fails.
Any help is greatly appreciated.
Hi mate , have a read at this and follow if you can at your own risk ⚠️
Its a quite complicated issue and not a straightforward one I am afraid:
www.easeus.com/amp/partition-master/windows-10-could-not-update-system-reserved-partition.html
@@VitalTechHelper Great help! I actually deleted logs and that freed up some space too. Increasing the partition size will be my next step, but the current free space was increased by deleting the logs from original installation.
Thank you.
I have a Dell Optiplex 3020 SFF desktop PC.
It has a Windows 8 Pro sticker on the case, but it came with Windows 7 Pro.
After the Windows 10 Pro upgrade, Windows 10 Pro still would not activate.
I then ran the Powershell script that you mentioned multiple times in your answers below.
Bingo.
It worked.
Thank you again.
The question I have is if I replace the HDD with a SSD and do a new installation of Windows 10 Pro, will Windows 10 activate?
I am not sure whether the Powershell script lets the Microsoft servers know about this PC.
After the activation of this machine , if you use microsoft user profile then the activation key get saved on the MS server. And when you decide to upgrade HDD/SSD and install windows 10 without key and just sign in with the same MS account, it will activate it.
If all fails, just run the power shell again👍
Dove posso trovare lo script Power Shell?
Bro come on I think it work but my computer won't even turn up.Do you have a solution
Power it off fully by holding the power button for 10 seconds if its a laptop. Or power down from mains if its a desktop. Reboot and see if it works
Failed nit working said is setup has field to validate product key 😭 someone help me plssss
Great video, worked well. My laptop seemed to hang at one point when restarting - then I realised I had a USB stick plugged in and my laptop was trying to boot from that first. I held down the power button until the machine went off, removed the USB stick, powered back on and it worked. :-)
You're welcome!
@@VitalTechHelper The only thing I did find is that you can no longer activate Windows with the old Windows 7 product key. That said, it's no big deal, because everything still works, including all the Windows 10 updates.
i have a doubt in the first step after downloading the file what do we do?i dont clearly know anything abt laptop/computer programming so please kindly help
Its all very clear in the video, I would suggest perhaps to watch the video a few times and pause it if you need to and move forward step by step 👍
After converting from window 7 to window 10, the PC becomes very slow to opening the apps, files or software. Is there any tutorial for making the PC to run smoothly??
Check disk mate
Hello, whenever i try doing step number two. 4:30 it wont run. it says something about a unknown publisher then it says " this installation requires windows x64" any idea what i could do to get this problem fixed?
Thank you!
It sounds like the copy of windows 7 you have is 32bit , so you need to redownload the windows 10 32bit instead of 64bit.
Worked perfectly. Used powershell method to activate. TYVM🙂
Good job 👍 enjoy
What is this powershell method that everyone is talking about? I wish that it is pinned as the first comment.🙏
@VitalTechHelper could you please help?
hello there! everything was working fine until when i tried downloading 7zip, it said: "error! This installation requires windowsx86" please help me fix this!
You windows 7 is 32bit (x86) therefore, You need to download the windows 10 32bit iso as well as the 32bit of 7zip
@@VitalTechHelper does that effect the performance of the computer? because i am upgrading it for the performance, a windows 7 32-bit does not run games very well, which is the reason i am upgrading it.
I’m not sure on that tbh, you best clean install windows 10 64bit then
@@VitalTechHelper i did everything, it showed the windows 10 logo. but then windows restarted as windows 7 again. please help me because i was challenged to upgrade this computer an i cant lose a bet. please understand!
Three separate attempts following the instructions to a 'T' start to finish WITH an active WIN7 Pro product key still yielded "activation required". A complete waste of my time.
Sorry to hear it didn’t work for you but It works most of us. Try activating it with his method:
PowerShell (Recommended)
On Windows 8.1/10/11, right-click on the Windows start menu and select PowerShell or Terminal (Not CMD).
Copy-paste the below code and press enter
irm massgrave.dev/get | iex
You will see the activation options, and follow onscreen instructions.
That's all.
@@VitalTechHelper Doesn't that risk seizure of my Microsoft account and all its valuable assets? LOL Now THAT worked like a charm. Still seems a little shady, tho. Thank you.
Hi, do I need to back up my files if I'm going to uograde from Windows 7 32- bit to Windows 10 64- bit? Thanks.
Its not a simple upgrade from a 32bit os to a 64 bit os. Its a clean install , meaning backup everything and then wipe and install windows from scratch 👍
Showing some error.What can I do now?
Whats the error ?
its failed , please help 😭😭😭
What was the problem
Bro I can't get wincd page after I downloaded it @@ArnoldfromBelgium
Great help! Thank you!
Glad it helped!
Hi there, will the software and the drivers still work after the upgrade?
No ,you will have the option to keep everything . Please rewatch the video👍
okay thanks I will
i unzipped the file but when i run the setup as administrator it doesnt do anything ?
works!!! i got it all and everything went as you said. thanj you
Welcome
Will it erase or ask to reinstall all softwares in current computer?
It gives you the option to keep apps and data
for me dont work how to find product key please help!
Hey i dont have a product ID its says not available can u post a tuto ?(
If your copy of windows 7 preactivated, then skip the key on installation step, once upgraded , it should auto activate. If not , in comments find an activation script.
Thanks brother this video helped me a lot
Glad it helped
this worked on my Windows 7 Lenovo laptop - definitely make sure NO devices are connected, including the mouse!!
now I will reset to factory settings, install Avast anti-virus, internet...and I am good to go : )
Does it have side effect on your computer/laptop?
No side effects
Help 0x000000f error came i cant even run my laptop now plz help plzplz
Help
Its a windows boot manager error, try these fixes: recoverit.wondershare.com/computer-problems/fix-windows-error-code-0xc000000f.html
I did the solution using a bootable usb it worked but when I restarted my laptop again it says a error couldn't find a operating system try dissconning..... Please help I can't use my laptop
Thanks Man 👍
It doesn't want to work I don't have the production key
Having problem with the 7z if i try and open it tells me it requires windows x64 which I downloaded
same here
The installation app stopped working while at the "Making sure you're ready to install" part. How do i fix this?
Reboot and try again
@@VitalTechHelper well on that same part the app just crash and said "modern setup host stopped working" how do I fix this? Thanks in advance
How to upgrade windows 7 to windows 8.
Give steps how to upgrade with out any data loss.
Pls help me😢
I’ll upload a video soon, so stay tuned👍
it still working as today 9th April 2024 to my Dell Latitude E5440. Got the windows10 activation error pop up after i updated the windows10 itself, however i follow the powershell method as per your comment to Mike Thompson, it does activate the windows10 immediately. Thank You Very Much.
I’m glad it worked.
Thank you by the way I installed windows 8.1 instead! and my computer has 32x So I have to pick 32x bits by the way, I did not officially got the iso file from Microsoft
Hey what is the Windows 10 product key to set up, idk pls help😭
If it gives you the option , I don’t have a key’ choose that one and proceed , if your windows is already active then it will activate automatically 👍
can I do this if im on win7 pro (all win7 updates fail WHEN I TRY ) but that being said would it work if i did this to 10?
Yes give it try, it will work 👍
It worked, Thanks bro
Welcome 👍
Thanks bro you are the best
Welcome
The windows page says I need a license to install winndows 10. The tool won't run on my windows 7. Error code 0x80072F8F - 0x20000.
Your windows 7 needs to be activated to be able to upgrade it
Many thanks first. However, it failed and showed: "0x8007001F - 0x20006 The installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation".
Is there any method to fix? Many thanks,
Hi , two fixes you could try, first: make sure no external usb devices connected except your mouse and keyboard. 2nd : create a new admin user account and try upgrading from that account, could be a possible user profile issue.
Help! Im getting some Error saying setup cannot be continue. And some Error Code. What can I do?
Do you have a more specific error message?
Will Windows 7 files be deleted or will Windows be installed on Windows?
No files won’t be deleted
Thank you
Works fine as of 8/5/2024, activation is not required as long as you have legit windows 7 follow instructions to the letter
I’m glad it worked for you, please like and share , thanks 👍
How did it work as of 8/5/24 when your 2 months behind me and its 7/27/24?
How do I activate windows after it worked for me.... It showing couldn't be activated
You will fine the activation code in the comments, so please browse through them👍
Hi help please it says that the source isnt designed to run on windows or it contains an error. TRY installing the program again using the original installation media or contact your system administrator or the software vendor for support.
It sounds like you downloaded the wrong version of windows 10. If you downloaded the 64bit version, re-download the 32 bit version or vice versa 👍
It not work need product key where do i find product key pls help me 😭
The link to get a key is in the comments somewhere. Look for it and you’ll find it.
thanks! worked like a charm without a hitch
You are welcome 👍 please like and share
Didnt work. Error : 0x8007001f - 0x20006 the installation failed in the safe_os phase with an error during replicate_oc operation
Try the following:
Check you software Installations. endpoint protection or Security software blocking changes to system drivers. Remove it and try again
And be some missing drivers on intel chip-set. Install all drivers
I tried again and still failed.
My window 7 is not genuine so how can I upgrade to windows 10 ?
I followed same steps but it still restored to windows 7
You should be able to upgrade to windows 10 with this guide even if its not genuine BUT you will need to activate windows 10
Thank you , this worked for me.🙂
Glad it helped
It really works thank you
You're welcome!
Does it work even after Microsoft drops support for upgrading from Windows 7/8.1 to 10/11?
In this case, the Windows 7 pro key no longer works, correct?
If your window 7 is activated either home or pro , it should work. 👍
@@VitalTechHelper It's not true
@@VitalTechHelper i have window 7 ultimate will it workk on thisss??? many many thanks in advanceee
Works like a charm, thx man
I’m glad it worked for you❤️
what is the activation key of windows 10, 32-bit?
Install without a key and it should activate automatically afterwards.
PLSS I NEED U!! when i click on setup.exe it tell me that the version of this file is not compatible with the version of windows you're running. how can i do?
Check if you have windows 32bit or64bit by searching for system. And then redownload the correct windows.iso file accordingly
@@VitalTechHelperI tried both but neither worked
This worked, TYSM!❤
I’m glad it worked for you❤️
after making it thinkim on chrome OS it didnt show me installations stuff
:(
the worst thing is that at the end ofdownlading like windows 10 from iso, it returns to the previous state
It worked for me. Thank you very much.
You're welcome!
How did you activate windows...
Thanks so much worked like a charm!
I’m glad it worked fir you, please like and share. Thank
How did you activate windows
I keep getting failed-network error….network is fine☹️……what do I need to do? Help!
just get better wifi
If it happens post instalation of OS, it might be that you need to re-install your network drivers.
It worked, thanks😊
You're welcome!
Bro thank you so much 💜🙏🏽
My pleasure!!
It want's the product key in the setup...
If it gives you the option , I don’t have a key’ choose that one and proceed , if your windows is already active then it will activate automatically 👍
Did anybody's laptop have a annoying ringing to it
I cant activate windows With your product key and also not with mine
Same
This didnt work for me 😢
Hello It will harmful to your PC what todo during installation
Its an official update, not harmful
bro is not worked in my pc
Please help me it says it has failed validate the product key
Is that before or after the installation?
I also face same error any solution ???
@@VitalTechHelperat the time of getting few thing ready
Doesn't work for me idk how to Fix it, 6:07 at this time i waited so long and when its hundred percent its just go back to The windows 7 and its says we cannot Upgrade it to windows 10 and theres like 0x0000 something i don't remember the exact Thing that it said, How to fix it? Is it still possible to upgrade it? (need help)
Hi, it still works and many have successfully upgraded. I think you need to cleanup disk and check disk for any issues. Make sure uninstall any security softwares before the upgrade. Also, make sure no external storage or devices are connected to your pc. And restart before upgrade👍
Thank you very much I will try it Right away
I don't know what I did wrong i followed all your instructions well and it Doesnt still work
Its said " We couldn't install windows 10, We've set your PC back to the way it was right before you started installing windows 10
0x8007001F - 0x20006
The installation failed in the SAFE_OS phase with an error during REPLICATE_OC Operation"
Can someone help? I try to do it and when it finishesit says " We couldn't install windows 10, We've set your PC back to the way it was right before you started installing windows
10
0x8007001F - 0x20006
The installation failed in the SAFE_OS phase with an error during REPLICATE_OC
Operation"
Didn't working only wasting my 05 GB data shit 😢
THANKS ❤️
You are welcome, please like and share
How do I activate my window 10 pro after I upgraded it from window 7?
Did it not automatically activate it for you?
@@VitalTechHelper no 😭
Ok try this to activate it 👍
PowerShell (Recommended)
On Windows 8.1/10/11, right-click on the Windows start menu and select PowerShell or Terminal (Not CMD).
Copy-paste the below code and press enter
irm massgrave.dev/get | iex
You will see the activation options, and follow onscreen instructions.
That's all.
4:38 showed error this installation requires windows x64
You need to download 32bit/x86 iso
i cant install the zip
I click the confirm of Language but still ERROR, WHY?
I think u installed wrong bit