Duuuude!!! Do not delete the HVAC! Every person who deletes it regrets it. Heat and cooling is so helpful especially for rain days. Hopefully you sort a solution for heat and cooling if deleting it for a smaller version
8:59 This gave me an idea, when I get myself a cosmetically rough car to drift in I want to use an old floor jack handle trimmed to fit as the handle for the hydro handbrake, I think it'd be a nice touch in a beat up, stripped out missile
Best way to start the morning off before work. Thank you, Mike, for all the wonderful content and helping keep the rest of us inspired to keep going with all our builds!
About preventing the plate from scratching the paint, you could put some scrap vinyl on the back of the plate, some shops will give you free offcuts to use. Also to protect the hooks you could leave some extra vinyl at the plate's bottom and wrap it around maybe?
Motor Vehicles inspection kinda pointless in Jersey now also. They used to be more strict which kinda sucked if you had a really modded car. Now if you have some bolt ons, a muffler silencer or something, and the right guy is working you can kinda make it through. I remember the guys at the DMV laughing when I brought my 86 Corolla back in the day (late 90's-early 2000's), it was running so rich, but I needed a sticker rejected or not. Po-Po used to love handing those failure to inspect tickets at me, I think they were like $180 a pop. Liked the Glizzy plates definitely original
Hi Mike, For the Y32, Z32 brake calipers work great on them! But I will let you know I have a set of brake pads for the rear if you want them, and if you want I can send you my old calipers as well
Well this worked out well. I went to look up your old video to get Dingdongsrifts info so I could ask him about pricing to scan a part for me. And not only did I get that info but I guess now I'm watching a new video I hadn't yet noticed you uploaded
I had a similar thing years ago when I got new wheels! It turned out that there was a tiiiny sticker on the lip of the tire (where it mounts to the rim) that they didn't remove when mounting. Whenever the tire got flexed by the road you could hear it get squished between the lip of rhe rim and the tire. Drove me nuts and took me a good while to figure this out. Even did a little burnout in my trouble shooting xD
Here I thought you were doing home powdercoating, just a differnt kind I guess 🤣 Wish I could get my 73 amc hornet sedan scanned, I do a ton of 3d printing and modelling myself without the scans. Working on flush mount push and pull electronic door handles 😅 Guessing he uses ASA filiment? PLA and PeTG warp under heat over time 😆 I got 1" spacers and hate it. Wish you luck on fitment , looking great👌
The licence costs you have aren't that expensive. Think someone said in Canada it was about 300 moose bucks. My Altezza in the UK is nearly $440 for a year! We have a yearly "MOT" inspection too at $70. Whole car inspection. Touch wood, mine hasn't been much hassle. Bar the emissions test, I have to warm the car up before due to the Catalytic converter being in the middle. Only thing we have is when a car is over 40 years old, it then becomes inspection and road tax exempt.
noriyaro recently posted a slammed car drift festival video with a gloria that looks similar to your spec but with a crazy stance at about the 10:15 mark in that video, projects all looking good though!
Love that new plate haha! (Btw personally think the angle you folded is a lil bit too aggressive, aesthetically wise. If it’s on the bumper, that angle would be perfect. But it’s on the trunk so I think it’s a lil bit too much😅) (but I still love it lol)
here in cali we call it smog in a smog tech in La and people pay good money to by pass smog every 2 years and tags are expensive af for my m3 is 240$ a year
If I’m not wrong somehow it looks like the front tire that was on the back of the Gloria has a slight wobble to it, meaning it’s not running centered 100% but I could be wrong
"Glizzy was originally used to refer to a handgun, specifically a glock. Due to the similar shapes, glizzy started being used to describe hotdogs in the 2010s. Glizzy can also be used as a sexual innuendo, usually in a derogatory context." I don't get how this fits Gloria?
11:13 The pinky finger is about 1.5cm (15mm) wide A fist without Thumb 9cm (90mm) with 10cm (100mm) ✊ And if you spread the thumb and pinky you have 20cm (200mm) 🤙 (Ofc depends on your Hands)
Quick question, where do you get your wheels rechromed and how much do they charge for a set of wheels? I've got some chrome wheels that are in desperate need of replating and would love to know where you get yours done. They look literally perfect.
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
Duuuude!!! Do not delete the HVAC! Every person who deletes it regrets it. Heat and cooling is so helpful especially for rain days. Hopefully you sort a solution for heat and cooling if deleting it for a smaller version
YESSSSSSSSSS! Out grindin' in the garage on a Friday night and there's a new Mike drop. Love it. ...get it, Mike drop? Mic dr--nevermind.
😅
Marty is such a cool dude. Glad you guys are doing stuff together now
8:59 This gave me an idea, when I get myself a cosmetically rough car to drift in I want to use an old floor jack handle trimmed to fit as the handle for the hydro handbrake, I think it'd be a nice touch in a beat up, stripped out missile
Tim always looks high 😂🍁💨 24:40 looks blazed 😂
I love how Mike is so consistent and always keeps an update but low-key would love to see some drifts RC content
Bruh, I totally lost it 🤣
did you really call it a "Wu-Tang war whistle"
Best way to start the morning off before work. Thank you, Mike, for all the wonderful content and helping keep the rest of us inspired to keep going with all our builds!
Daaaamn that nose candy really be doing work huh🤣
Quality booger sugar
Ding Dong Marty is awesome! Opened up my eyes to the whole 3D scanning car parts!!
About preventing the plate from scratching the paint, you could put some scrap vinyl on the back of the plate, some shops will give you free offcuts to use.
Also to protect the hooks you could leave some extra vinyl at the plate's bottom and wrap it around maybe?
5:06 Couldn't help but notice y'all were drinking Lithuanian-made kvass. It's some good stuff. Greetings from Lithuania.
Geri vyrai gera gira geria
Glizzy is so tough. That car is gorgeous.
Ik it's too late because you already have the plates, but what about Gloria + Prizza? Glizza. That could also be the nickname of the car
I love how the videos are getting more frequent! One of the best parts of my day.
Love the content but now all I'm gonna think whenever I see the gloria is...... "hotdog" lol. Keep up the hard work man saving those cars!
im always so stoked to see mike working on the Gloria, she's so beautiful
Let’s goooo!! My Gloria jar came in yesterday lmfao shits sick
shoutout ding dong drift, guys a legend
Waaaaaait, I low-key do really want those floor mats lol.
They would be sick in my 4d ek hatch lol.
vacation for six weeks damn lucky😂😂
Man that was the best scanning spray I've ever used
Your videos are the highlight of my week icl.
Ive seen rob dahm bend their rods when welding to get into spaces better although he had to use two welders to get gas to the weld it worked perfect
unreal how dope gloria looks certified glizzy mobile
@11:19 easiest way to judge size of a wheels space. 25mm is 1inch. so 12.5mm is 1/2 inch. ect. ect. ect.
Yes! Idk how so many people don’t know inch-mm conversions it blows my mind. Plus you can use the wrong sockets if you know your conversions 🔥
Merry christmas to me, the rare morning i wake up early and get treated to new upload
awesome vid mike keep it up
Motor Vehicles inspection kinda pointless in Jersey now also. They used to be more strict which kinda sucked if you had a really modded car. Now if you have some bolt ons, a muffler silencer or something, and the right guy is working you can kinda make it through. I remember the guys at the DMV laughing when I brought my 86 Corolla back in the day (late 90's-early 2000's), it was running so rich, but I needed a sticker rejected or not. Po-Po used to love handing those failure to inspect tickets at me, I think they were like $180 a pop. Liked the Glizzy plates definitely original
Hi Mike,
For the Y32, Z32 brake calipers work great on them!
But I will let you know I have a set of brake pads for the rear if you want them, and if you want I can send you my old calipers as well
the gloria lookin so good even with the staggered setup
i have a 90' 300zx with red interior and would love those floor mats!
The ticking your hearing could be your ABS sensor, I had a ticking on my 2000 dodge durango 4x4 and it was from the ABS sensor
"BBL GLIZZY" 🗣🗣🗣
waking up and seeing my boy mike posted hell yeah!
Well this worked out well. I went to look up your old video to get Dingdongsrifts info so I could ask him about pricing to scan a part for me. And not only did I get that info but I guess now I'm watching a new video I hadn't yet noticed you uploaded
@prizzaMike is he ONLY youtuber to get me hype when they upload LFG
Love the way the gloria is ! good work my man! proud ! oh and Id take the red carpets ahaha
i want to watch but going to bed had to like asap i kno it will be fun to watch when wake up thank you fffffffffffffff great videos
I had a similar thing years ago when I got new wheels!
It turned out that there was a tiiiny sticker on the lip of the tire (where it mounts to the rim) that they didn't remove when mounting. Whenever the tire got flexed by the road you could hear it get squished between the lip of rhe rim and the tire. Drove me nuts and took me a good while to figure this out. Even did a little burnout in my trouble shooting xD
The 5 spoke chromies look soooo good on the Gloria though!!!
Man woke up to a new mike drop perfect timing
Ooooooshk repping the Grind Hard Plumbing boys 💯 top man 💯
Fun fact. I have 3d printed hub centric rings. Made them 3 years ago.
Love it your rides are making great progress.
Sweet action that's killer badass more work on the 240sx. & 300zx I'm so excited to watch what is going on happen next
sound sounds like wheel weights moving, check by tapping the weights with finger , esp the inner barrel stick on weights
Хлебный квас,это по нашему😮
Специально искал кто это подметит 😂
W video!
lezzz go, best part of my week is theese vids
love the content mike always enjoy your videos 👌
I've had worn sway bar end links make that popping/ tapping noise while driving on some cars.
Dude your tire mounting buddy trolled yah, bet he put something in the wheel/tire LOL
love your videos keep it up, genuinely always look forward to watching 💙
Love the videos Mike keep up the hard work and imma check on those EA plates in my state good looks 👌 😂
Great video! Love your videos keep up the amazing work on your cars!
Check the inner part of the rim. Mine made that noise when it was cracked
Ooooh the preview! Nice
Fun fact if you don't now what size spacer you have you can put a wrench to it and you'll know example 10mil spacer will fit in a 10mil wrench ect ect
I think the middle floor mat in the rear should be tucked under the other 2 on the sides. :D
It looks Much Gooder with the floor mats my guy!
10 mins ago, I needed this tonight 😂
Dude big fan man been watching since the crash ❤
wutang war whistle. yessss sir!!!
"Wu-Tang war whistle"
#priceless
Here I thought you were doing home powdercoating, just a differnt kind I guess 🤣 Wish I could get my 73 amc hornet sedan scanned, I do a ton of 3d printing and modelling myself without the scans. Working on flush mount push and pull electronic door handles 😅 Guessing he uses ASA filiment? PLA and PeTG warp under heat over time 😆 I got 1" spacers and hate it. Wish you luck on fitment , looking great👌
You da best Michael
Marty has definitely had his share of nose beers over the years😂😂
The licence costs you have aren't that expensive.
Think someone said in Canada it was about 300 moose bucks.
My Altezza in the UK is nearly $440 for a year!
We have a yearly "MOT" inspection too at $70. Whole car inspection. Touch wood, mine hasn't been much hassle. Bar the emissions test, I have to warm the car up before due to the Catalytic converter being in the middle.
Only thing we have is when a car is over 40 years old, it then becomes inspection and road tax exempt.
noriyaro recently posted a slammed car drift festival video with a gloria that looks similar to your spec but with a crazy stance at about the 10:15 mark in that video, projects all looking good though!
Love that new plate haha!
(Btw personally think the angle you folded is a lil bit too aggressive, aesthetically wise. If it’s on the bumper, that angle would be perfect. But it’s on the trunk so I think it’s a lil bit too much😅) (but I still love it lol)
Let goooooo love the vids keep it up
Yess !
You should make it out of KBD 🤙🏻
I got a great place that sells classic cars that are just waiting to be restored that place is collier motors in Pikeville North Carolina!
here in cali we call it smog in a smog tech in La and people pay good money to by pass smog every 2 years and tags are expensive af for my m3 is 240$ a year
If I’m not wrong somehow it looks like the front tire that was on the back of the Gloria has a slight wobble to it, meaning it’s not running centered 100% but I could be wrong
Have you notice your tire hit the fender as soon as you put it down ? Dont mess up the nice paint job 🫥
Keep the double stagger on the z!!!
please design a replacement plastic piece for the glovebox latch! they fail alot and oem ones are $200 on Z1
Ticking/Pinging sound can be an issue with the valve stem if it's a metal valve stem
Normally Nissan back seat floor mats the middle ones flaps go under the side mats
Us plates look sick, damn so jealous
Hopefully you guys come up with something for the cowl that always breaks, mines broken lmao
It could be a pebble, stuck behind the brake shield and the rotor I’ve had that happen before
i was just looking if you posted😂
"Glizzy was originally used to refer to a handgun, specifically a glock. Due to the similar shapes, glizzy started being used to describe hotdogs in the 2010s. Glizzy can also be used as a sexual innuendo, usually in a derogatory context." I don't get how this fits Gloria?
At last another one 😎😎
great video as always mike! keep it up!!!
That sc is so cool man
Thanks man!
11:13
The pinky finger is about 1.5cm (15mm) wide
A fist without Thumb 9cm (90mm) with 10cm (100mm) ✊
And if you spread the thumb and pinky you have 20cm (200mm) 🤙
(Ofc depends on your Hands)
Imma need that battery cover
its crazy how invested I am in the 300zx build and its not even mine!!
Have you tried checking the wheel bearings the might be the clicking sound on the gloria
Quick question, where do you get your wheels rechromed and how much do they charge for a set of wheels? I've got some chrome wheels that are in desperate need of replating and would love to know where you get yours done. They look literally perfect.
make an aggressive lip to put on the 300zx
nothing would’ve prepared me for the license plate reveal
11:23 most reliable measerment tactic
12:25 I think smokes is trying to tell us something lol
Not digging the bent plate mod but love the glizzy
Dam since your offering I'm up for those floor mats it'll really accentuate my red shit boks😂😂😂