HPI TROPHY TRUGGY FLUX vs HPI TROPHY TRUGGY 4.6

RC CONNOISSEUR -- HERE IS MY COMPARISON SLASH REVIEW ON BOTH HPI TROPHY TRUGGIES ELECTRIC AND NITRO POWERED. OVERALL THEY ARE BOTH GREAT TRUCKS. THANKS FOR WATCHING AND SUBSCRIBE FOR MORE VIDEOS.

[@rcnitrotruggy8857]

I have the 4.6 TT. Its a fun truggy. I have Proline Badland tires and it really hooks up.

[@tonygregory1397]

Hi, I have the flux. The clicking noise when turning is the steering rod catching on the centre drive shaft housing. Adjust your steering cut-off points! If you have a look you will see where it's been catching. Once adjusted all will be fine. A 19T pinion or higher in the flux and it will increase the speed a lot.

[@MANOSRC]

yeah....they are both good truggies for sure, but i find very hard to believe 51mph on the nitro, even with the big block.....you must be very good on tuning nitro engines...thanks for this comparison video!!

[@rhengst22]

Thanks Manos, I have gotten pretty good at tuning the nitro engines, check out the speed run videos I did on both, you will see the 40 mph and the 51mph

[@sonsrc1326]

Sweet mate

[@PASTEVE1976]

I believe the clicking when turning far that you are referring to is the steering hitting the front diff output. Mine hits on both sides. Seems that HPI could have added an additional 1/4” of room for clearance. Bad design flaw in my opinion.

[@696mattie]

I see your using the iR4 receiver with sensors on the nitro. If so, witch one's and how'd you do it?
Thanks

[@luigynkaren062011]

Looking to get the nitro version in the next 2 weeks what nitro fuel do you run on it?

[@JamesmoellerX]

Hi the clicking would be something to do with your servo. It is probably the servo clicking but this could happen because something else is stopping the servo or you have shredded some gears in the servo. This same thing happend to me and I destroyed some of the servo gears. Hope this helps.

[@Cake_Doge]

it might be that (6 years later) I also saw someone having the same sound when turning only to one side with a different car

[@mickyovts3872]

Are the dogbones in the centre different sizes between the 2 ???

[@michaeldev5962]

should i get this one or the ofna sste
i need something durable

[@user-jv2jf1ll8p]

servo needs changing