Joe, you are the reason I chose Studio One 3 years ago when I started my recording adventure! I learned almost all I know from watching your videos. Can't say thank you enough. I love Studio One more with each upgrade.
This DAW just keeps getting better and better with the upgrades and things that we can do with the audio signal. This splitter tool creates endless possibilities for amazing sounds!
My mind is blown!!! I haven't watched a video longer than 10 min nonstop or without losing interest or attention in a long time. Thank you! I just switched to SO-5 two months ago.
Thanks Joe! You make Studio one look like a music playground 😄. All your splitter tutorials are awesome. I'm going to have so much fun with this stuff.
Joe. This might be a bit weird but bare with me. I'm a guitar player love to tinker with effects. You've just sold me a sub to Sphere based on the possibilities presented by the new Splitter. Can't wait to get my hands dirty!
when splitter splits the audio is it also splitting the audio strength..? (split into 2 so each split receives 50% of the audio strength) or does it multiply the audio into each split equally..?
You are right, just turn the left (original) channel up by 6 db, which will double the volume. This way you compensate that split. Then add your parallel.
I am waiting for the expansion of this so it becomes a modular system by adding/combining instruments, effects and modulators (LFO, S&H, Envelopes, etc.) to modulate parameters of the plugins. I'm also missing the ability to automate gain of the different paths of the splitter. This is useful to sometimes gradually dialing in some delay or reverb. Mixtool goes only to -24dB which is not enough.
would be awesome if you could add features like "Send follow main pan" is really a pain in the ass to be panning each send hopefully you can improve this and add the option FMP on the sends in the future. Best regards
I'm using Studion One 5.2 Artist, but I can't find that routing icon/view where you arrange the effects. Is it a Pro feature or where can I open that view?
Nice Video, Joe, really opens up a lot of possibilities! I have a question. Is it possible to map the "mute output" function of the splitter to, say, a letter in my keyboard?
I see how it tries to be like Ableton's instrument rack. But how do you balance out continuously what portion of the signal goes to each side (like 80:20, 79:21,... ) ? And be able to automate it as well? I didn't get how you would assign the splitter to an automation lane. Can you assign the splitter levels to a macro knob using the macro as a dry/wet knob? I purchased 5.2 pro and I'm a bit lost.
Okay, so the FX Chain re-naming was what I had intended to convey last time we tromped thru the "Name a Splitter" (heated) discussion. I admit I was inadvertently confusing the two. You can't, currently, name a splitter. But you can engage it in an FX Chain and name that. It ain't the same. I know. Can you ever forgive me?
Hey Joe, question. Using this, can I create a mid side eq, then go back to a mono compressor, followed by another mid side eq? Or would I have to close out the first mid side, put in the compressor, and then put another mid side? Thanks, your videos are awesome!
Such a normal mixing techniques today, is the ability to use the original source as a sidechain to itself. Mostly used with wet effects, where you for instance duck/sidechain reverb or delay when the original source is playing. The splitter would be amazing for exactly this, but it is not possible Now.. This is really keeping me away from the splitter for instance. This is also a normal feature in some of the other DAWs that have rack/chains like this. for example abelton effect rack has this feature that you can sidechain the reverb to dry signal...fl studio patcher also has it... please make this feature avaible in next updates.thanks alot.
Hi Joe, good video as always however have I missed something, there is nothing new here right? Everything shown in this video is exactly how its been for years in S1pro, the only change I can see is that you now have a visual in the mixer channel that It has a splitter, from a sound design angle (and a feature request i submitted years ago) I was really hoping for the splitter sliders to be assigned automation, link a midi controller to the slider and etc. But whats changed is you can see a splitter in the channel and thats it, which was easily compensated for by naming conventions anyway, I got excited with the 'new splitter tool' announcement, is this it?! (Don't get me wrong the splitter is fantastic and have been using it for years and I have heaps of fx chains saved using it so I am definitely thankful for it, but not really seeing anything new).
Hello there. I want to know if personas is even thinking of addressing the issue with the roli equator plug-in. It seems that every time you hit an overlapping note it cuts off the last note hit ..That is not normal behavior for this plug-in. It works fine in ableton live 11 and also in reaper. So it’s not a driver issue or VST issue…. The issue started when they switched over from version four to version five. And the issue with the MPE feature Studio five.. please share if there’s any updates to this issue ..Thank you..
All very cool, but unfortunately you can't automate the split levels (S1 v5.5), which makes it much less useful. I was trying to use it to morph from one effect to another and was surprised to find out PreSonus left out automation.
I wish it has linear filter capabilities for the frequency split. Right now one should be really careful when using the frequency split in a multimic recording.
Hi Joe What does the normal splitter actually split? Does this split the level as 50% and 50% or 100% and 100%? When we use the faders, does that proportion change?
That mute option for each channel should have a circuit icon even when the circuit is closed. Like a dot with a circle around it. Otherwise, it's not intuitive that you are able to click on the line to mute it.
So the mute and level functions by the splitter plugin still not have an automation function? come on people, this was asked for so long now. Why is it so difficult to implement this?
Something doesnt work properlyi think, you can't copy splitter to another track, and if you duplicate (complete) a track with splitter in, the duplicated track doesnt get the splitter
Ok. I'm becoming really frustrated with 2 things about PreSonus: 1- Studio One Artist version: A) Is missing lots of features that the EARLIER versions had. B) So you now have to either buy those features like 'amps' or spend hundreds more for the Pro upgrade. (So Studio 5 is really... a downgrade). 2) Many of those who represent PreSonus on YT instructional videos DO NOT SAY you need the Pro version before sending thousands of us on a wild goose chase to see if there is something wrong with our system. It would really be helpful if in future such features were announce as Pro or not... before the video lesson. That said- This Splitter is only available in the Pro version. Thank you.
Yes right on. I was surprised that this couldnt be automated. Id also like to have an inverse link so that the proportion of each could be automated in the NOrmal mode
@@dulmin_ I don't understand why I am suspected that I was joking when I express my contempt and frustration with a software... I just don't understand how to use it, I think it's so stupid and I really don't understand your question...
@@reinklang Oh, yes !!! Including Voicemeeter. I wish to have the power to create a powerfull virus in my laboratoire and that virus destroy all the softwares that I don t understand !
Joe, you are the reason I chose Studio One 3 years ago when I started my recording adventure! I learned almost all I know from watching your videos. Can't say thank you enough. I love Studio One more with each upgrade.
Wait! Did you chose Studio one...three years ago, or did you chose Studio One 3... years ago? I jest.
@@laynehoward2870 Lol
@@laynehoward2870 My brain just broke!
This DAW just keeps getting better and better with the upgrades and things that we can do with the audio signal. This splitter tool creates endless possibilities for amazing sounds!
Thanks Joe for the education. I've been messin around with splitter for years. Now I understand.🔥
My mind is blown!!! I haven't watched a video longer than 10 min nonstop or without losing interest or attention in a long time. Thank you! I just switched to SO-5 two months ago.
This DAW is absolutely amazing. I've moved almost completely to Studio One. Just wish it had a video track like Mixcraft. 👍
I think it has video playback
It does have, but it's pretty garbage due to the absence of a dedicated audio track for imported videos
NO BRO THIS IS LEGENDARY MY SOUND IS ABOUT TO EXPAND FAR BEYOND I EVER THOUGHT IT COULD
The tremolo bit was GOLD...GOLD, Jerry!
Love your videos. I'm a newb but already doing things I could of never imagined just 6 weeks ago. Cheers!
Snare drum fattening:
1. Three band frequency split @ 150 and 400.
2. Limiter on middle band.
3. Adjust frequencies to taste
4. Recheck limiter levels
AMAZING! Reason #5,387 why I love this DAW! Not to mention helpful videos like these making it nice and clear! Thanks Joe and PreSonus!
Thanks Joe! You make Studio one look like a music playground 😄. All your splitter tutorials are awesome. I'm going to have so much fun with this stuff.
I have been touting about Splitter for awhile now, I am glad its getting a lot of focus.
The splitter is very cool for mastering. It's awesome
Hey Joe this is my 3rd time watching this video...good stuff man...love the energy and the knowledge that you openly share with us..
Dangit. You guys are making it difficult not to make the jump to pro Joe. Fantastic tutorial Joe, every time I learn something new from you!
Look at the side chaining and you’ll switch
Great tutorial. Vocal is killing! Good stuff!
I am slowly becoming more and more of a fan of Studio One. I really need to use it more
Love this. What a fantastic feature.
For experimenting as well with different signal chains.
Joe ..Thanks for the way you teach...easy too understand but precise and to the point..great vid..
I always thought this was a great tool, but never used it precisely because you couldn't tell what track had split FX. Great fix!
Open solution for creating rich custom filter templates. Thank you for this clear demo.
This feature reminds me of Multipass for phase plant. Great job guys!! You're geniuses!
Joe. This might be a bit weird but bare with me. I'm a guitar player love to tinker with effects. You've just sold me a sub to Sphere based on the possibilities presented by the new Splitter. Can't wait to get my hands dirty!
Awesome thanks joe :D studio one is more powerful now. Makes want to mix my own song again.. Yeah!
when splitter splits the audio is it also splitting the audio strength..? (split into 2 so each split receives 50% of the audio strength) or does it multiply the audio into each split equally..?
Yeah, I noticed the same thing, I wish we could get a response for this...
You are right, just turn the left (original) channel up by 6 db, which will double the volume.
This way you compensate that split.
Then add your parallel.
really cool tool for compression or other sound design stuff when frequency splitt is used
Really great and fully comprehensive! Thanx!
I am waiting for the expansion of this so it becomes a modular system by adding/combining instruments, effects and modulators (LFO, S&H, Envelopes, etc.) to modulate parameters of the plugins.
I'm also missing the ability to automate gain of the different paths of the splitter. This is useful to sometimes gradually dialing in some delay or reverb. Mixtool goes only to -24dB which is not enough.
Add another mixtool
That was a really well done video Joe... good job. Made some wheels turn.
Man that was killer. Going to try it right away on guitar. Thanks man.
Awesome Joe ! Thank You !!!
again excellent explained...tanx a lot Joe
Thanks, especially for those creative tips.
would be awesome if you could add features like "Send follow main pan" is really a pain in the ass to be panning each send hopefully you can improve this and add the option FMP on the sends in the future.
Best regards
I'm using Studion One 5.2 Artist, but I can't find that routing icon/view where you arrange the effects. Is it a Pro feature or where can I open that view?
Nice Video, Joe, really opens up a lot of possibilities! I have a question. Is it possible to map the "mute output" function of the splitter to, say, a letter in my keyboard?
With macros I bet you can
I see how it tries to be like Ableton's instrument rack. But how do you balance out continuously what portion of the signal goes to each side (like 80:20, 79:21,... ) ? And be able to automate it as well? I didn't get how you would assign the splitter to an automation lane. Can you assign the splitter levels to a macro knob using the macro as a dry/wet knob? I purchased 5.2 pro and I'm a bit lost.
Please add the ability to rename each Splitter.
Okay, so the FX Chain re-naming was what I had intended to convey last time we tromped thru the "Name a Splitter" (heated) discussion. I admit I was inadvertently confusing the two. You can't, currently, name a splitter. But you can engage it in an FX Chain and name that. It ain't the same. I know. Can you ever forgive me?
I'm super excited. Presonus, you're amazing.
If I split in 3 channels, do I have to adjust the gain as if it were like 3 busses...?
Yes
This just opened up Pandora's box... I'll be doing some of this stuff.
Awesome tool awesome explanation.. Thanks
Hey Joe, question. Using this, can I create a mid side eq, then go back to a mono compressor, followed by another mid side eq? Or would I have to close out the first mid side, put in the compressor, and then put another mid side? Thanks, your videos are awesome!
Such a normal mixing techniques today, is the ability to use the original source as a sidechain to itself. Mostly used with wet effects, where you for instance duck/sidechain reverb or delay when the original source is playing. The splitter would be amazing for exactly this, but it is not possible Now..
This is really keeping me away from the splitter for instance. This is also a normal feature in some of the other DAWs that have rack/chains like this.
for example abelton effect rack has this feature that you can sidechain the reverb to dry signal...fl studio patcher also has it...
please make this feature avaible in next updates.thanks alot.
Does adding effects into the splitter reduce the CPU usage as compared to having them either directly on the track or in an aux channel?
If I have an older version of studio one how do I add the spitter to my fx if it’s not showing up?
Hi Joe, good video as always however have I missed something, there is nothing new here right? Everything shown in this video is exactly how its been for years in S1pro, the only change I can see is that you now have a visual in the mixer channel that It has a splitter, from a sound design angle (and a feature request i submitted years ago) I was really hoping for the splitter sliders to be assigned automation, link a midi controller to the slider and etc. But whats changed is you can see a splitter in the channel and thats it, which was easily compensated for by naming conventions anyway, I got excited with the 'new splitter tool' announcement, is this it?! (Don't get me wrong the splitter is fantastic and have been using it for years and I have heaps of fx chains saved using it so I am definitely thankful for it, but not really seeing anything new).
Hello there. I want to know if personas is even thinking of addressing the issue with the roli equator plug-in. It seems that every time you hit an overlapping note it cuts off the last note hit ..That is not normal behavior for this plug-in. It works fine in ableton live 11 and also in reaper. So it’s not a driver issue or VST issue…. The issue started when they switched over from version four to version five. And the issue with the MPE feature Studio five.. please share if there’s any updates to this issue ..Thank you..
Can we add Linear Phase and Frequency Selection to the filters? This would be amazing for mastering!
Hi Joe, does Studio One have a feature similar to FL Studio's Dump Score Log?? thanks
thank you mate, very useful
This is so cool.
Wooo Wooo Wooo Bass is cool ;-)
All very cool, but unfortunately you can't automate the split levels (S1 v5.5), which makes it much less useful. I was trying to use it to morph from one effect to another and was surprised to find out PreSonus left out automation.
The limit is 5 splits as of the current version
Hahah great video. Beautiful examples
I wish it has linear filter capabilities for the frequency split. Right now one should be really careful when using the frequency split in a multimic recording.
Thanks a lot man! You are so funny by the way 😂
*__* Thanx a lot! As always a lot of useful things! Regards! )
Hi Joe
What does the normal splitter actually split? Does this split the level as 50% and 50% or 100% and 100%? When we use the faders, does that proportion change?
I've just noticed that, seems it spits the signal 50 50
Very cool!!!
That mute option for each channel should have a circuit icon even when the circuit is closed. Like a dot with a circle around it. Otherwise, it's not intuitive that you are able to click on the line to mute it.
why your vocals in stereo?
How steep is the frequency splitter LP filter?
I have never used the splitter. Shame on me!!! Thank you Joe and PreSonus.
Oh man, it fasters all my things much!
So the mute and level functions by the splitter plugin still not have an automation function? come on people, this was asked for so long now. Why is it so difficult to implement this?
normal mode doesn't work...unless I'm doing something wrong. one fader turns the other down. i don't use the splitter for that reason
adding soundtoy in that splitter will make crazy shit
is frequency split linear phase? or can i change it?
Need automate branches, and mix know between arms. I want to be able to automate between 2 effects
How do you organize folders or ...? with effects in studio one ? Please
Plug in manager?
Basically... the splitter is a way to avoid the clutter of having a lot of busses?
So is this better than using sends??
"DISGUSTING ...." LOL :) Great video.
ou did not mention, that the splitter is not available in Artist version right ??
11 seconds in I say, "If you're a Studio One Professional user..." - Joe Gilder
i have the program how do i set it up plz help
No info about mid/side splitting using MixTool + Splitter? Hope that's for next episode :)
Yup. Coming soon. - Joe Gilder
@@presonus Awesome! :)
Does splitter have phase filter?
Something doesnt work properlyi think, you can't copy splitter to another track, and if you duplicate (complete) a track with splitter in, the duplicated track doesnt get the splitter
I have SO5P and updated to 5.2 and don't have the splitter pluging anywhere.
click on the Channel Editor or with the browser open to effects Ctr F and type Splitter.
I usually use it as multiband imager
In mastering
5 is the most number of “splits” you can have - I just tried to do 9 but it defaults back to a max of 5
How Can You Download that
Hey Joe and everyone at Presonus. If you duplicate a track, and copy all, if you've got a splitter in your inserts it won't be copied correctly
Would be nice to have the ability to save presets on Splitter, a little bit like the Fl Patcher have on FL Studio
Yup you can.
@@presonus when I turn off or bypass the inserts channel splitter remains on whilst other plugins are off. This makes hard to AB the sounds
Ok. I'm becoming really frustrated with 2 things about PreSonus: 1- Studio One Artist version:
A) Is missing lots of features that the EARLIER versions had. B) So you now have to either buy those features like 'amps' or spend hundreds more for the Pro upgrade. (So Studio 5 is really... a downgrade).
2) Many of those who represent PreSonus on YT instructional videos DO NOT SAY you need the Pro version before sending thousands of us on a wild goose chase to see if there is something wrong with our system. It would really be helpful if in future such features were announce as Pro or not... before the video lesson. That said- This Splitter is only available in the Pro version. Thank you.
It would be useful to automate Frequency Split, but I don't think it is possible to automate these splitter setting's.
Yes right on. I was surprised that this couldnt be automated. Id also like to have an inverse link so that the proportion of each could be automated in the NOrmal mode
Presonus let us have this feature for artist version too pleaseeeeeee #realeasetheSplitterforArtistVersion
This is nuts thinking about what can be done. Im going to SPLIT up with my girlfriend now.
HAHA YOU CANT BEAT ME, CHILD
Kid comes in and destroys everything lol
👍🏾👍🏾👍🏾
No mid side example.....
Just casually throw a splitter under a splitter. Me :🤯
how mixing my drums will be happier with saturation
Ok! Cool! Now buy me SO5.2
Can't. It's a free update.
Frustrating software. I hate all about !
You're kidding, right?
@@dulmin_ I don't understand why I am suspected that I was joking when I express my contempt and frustration with a software... I just don't understand how to use it, I think it's so stupid and I really don't understand your question...
@@redpoint8823 OK, so the software is stupid because you don't understand it?
@@reinklang Oh, yes !!! Including Voicemeeter. I wish to have the power to create a powerfull virus in my laboratoire and that virus destroy all the softwares that I don t understand !
@@reinklang See, he is just kidding
Speak slowly...
Can you pan the splits?