Excellent presentation! It is really complete, both for the optimization part and for the integration into the vehicle. Thank you very much for the detailed information you have given us.
Antenna and RF design simulation with ANSYS HFSS. I am really excited and admire your level final PCB. Please make one simple video step by step to show beginning to end with some components. Please devote for youtube learning a little time. Thank you very much for your time.
Hi Zefan, I did follow your wonderful guide for HFSS and I can do optimize LRC component in Circuit environment to matching impedance. But when I apply those new value to HFSS 3D through Lumped LRC and re-simulating it then the result of resonant frequency slip out of position where it should to be in Circuit environment. The plot look the same but only resonant frequency not the same. Is it possible that the way we set up Lumped LRC effect on simulation like current flow in LRC set up and the shape of Lumped LRC? And this is really out of my knowledge and I have no way but to ask for your help.
Hi! Do you know and could you help me about how I can prepare a simulation by HFSS or any suggested program for scattering from a half plane located at y=0,x(0,Inf),z(-Inf,+Inf) which is illuminated by a cylindrical wave of exp(-j.k.rho.cos(phi-phi_0) by the incident angle phi_0=60° or 45°?
Hiy Zefan I try to export my pcb board from SIwave to HFSS which is same in your presentation. But after exporting the passive component (capacitor, inductor and resistor) is not visible in hfss . If passive component is not exported my board may be become open circuit. Can you give me some comment please
Excellent presentation! It is really complete, both for the optimization part and for the integration into the vehicle. Thank you very much for the detailed information you have given us.
Antenna and RF design simulation with ANSYS HFSS.
I am really excited and admire your level final PCB. Please make one simple video step by step to show beginning to end with some components. Please devote for youtube learning a little time. Thank you very much for your time.
Hi Zefan, I did follow your wonderful guide for HFSS and I can do optimize LRC component in Circuit environment to matching impedance. But when I apply those new value to HFSS 3D through Lumped LRC and re-simulating it then the result of resonant frequency slip out of position where it should to be in Circuit environment. The plot look the same but only resonant frequency not the same. Is it possible that the way we set up Lumped LRC effect on simulation like current flow in LRC set up and the shape of Lumped LRC? And this is really out of my knowledge and I have no way but to ask for your help.
Does the radiation boundary include both the antenna pcb as well the car model?
Hi! Do you know and could you help me about how I can prepare a simulation by HFSS or any suggested program for scattering from a half plane located at y=0,x(0,Inf),z(-Inf,+Inf) which is illuminated by a cylindrical wave of exp(-j.k.rho.cos(phi-phi_0) by the incident angle phi_0=60° or 45°?
Hiy Zefan I try to export my pcb board from SIwave to HFSS which is same in your presentation. But after exporting the passive component (capacitor, inductor and resistor) is not visible in hfss .
If passive component is not exported my board may be become open circuit. Can you give me some comment please
Can you share the car model ?
Can u plz make a video on 4x4 Butler matrix using HFSS at 5.4GHz
would like to learn by doing. Would you share the board file used in this video
Hi guy! Why did you set PORT (Y,Z) on Split Method?
hi, can you simulate a jammer?
I'm not able to import the 3d aedt file into the antenna which I have simulated. Can anybody help me
Pipl, hello 🎉😊 simuleischen antenna microwave help
Can you share the car model ?