Great, concise and straight to the point. Most other tutorials seem like the presenter is either doing stuff mechanically without much thought or that they don't even know what they're doing/talking about. Cheers!
Probably the best tutorial for hfss I just started today and was able to to do this and actually understand what I was doing thank you so much, it takes a true genius to be able to explain things like this to a beginner!
Your video really helped me, I was so stuck on how to begin using HFSS so I google it and your video was the first one that I found (and the best introduction to HFSS, as far as I'm concerned). Please, continue spreading knowledge! Greetings from Brazil!
Hello Mr. Davidson, This video is really knowledgable. Thanks for making this process seem so easy. I request you to share the formulae to calculate the dimensions of the feed and substrate length & width. Guys plz like this comment if you too want these dimensions..
Thank you for this nice tutorial. I'd like to remark at 18:25: QW, meaning quarter wavelength, is set to 15 mm. However at 10 GHz we have a wavelength of 30 mm, so QW should be 7.5 mm to avoid confusion. Of course, the air box can be higher than 7.5 mm. In the tutorial the hight is hence half a wavelength, i.e. 15 mm.
Hi Kyle, thanks for the great video! I appreciate how you used variables to make it scalable (like a real engineer). I think the only thing lacking is to explain how to display the result plots (S11 and Realized Gain), that would be a good addition. Maybe instead of making a whole new movie you could just add an explanation in the video description?
Hi Davidson, I saw [info] Normal completion of simulation on server: Local Machine. (1:11:31 下午 二月 26, 2018) After the simulation, but nothing under the result file, how can I get the graph?
THanks for ur tutorial. Can u explain me the most important formulas for the dimension of this antenna? It would be great. I want to design this antenna for 500 MHz. Is it possible or is the frequency too low? Greetings
Hello Mr. Davidson, Is there any chance that you have a walkthrough for the entire array antenna or a file that I can study to help me with my undergraduate project? It would help me out greatly. Thank you.
hey kyle, i made Wilkinson power divider on hfss. while analysing i got error . here i quote .....Project1 (D:/HFSS_project/) HFSSDesign1 (DrivenTerminal) [error] Port refinement, process hf3d error: Port 1 does not have a solved inside material on either side.. (12:31:37 AM Aug 27, 2015) [error] Simulation completed with execution error on server: Local Machine. (12:31:38 AM Aug 27, 2015)
Kyle Davidson I'm trying to design a fractal antenna patch using hfss Could u please guide me how to remove a part of the already made patch on hfss I'm trying to design Sierpinski carpet for my final year project and before proceeding ahead they want to see the design of the patch and it's simulation It would mean a lot if u could help
Thanks sir for the video...can u please show how to assign port(lumped and wave)to hfss...and how we know lumped or waveport to assign and exactly where we have to assign these ports....
you do know stacking . . . dont you .!!!! So if you do then design it already .An antenna is fed and antennas are parasitic . .. . . fed electromagnetically
Hi Kyle, I am designing an antenna array and I am having some trouble when performing the impedance matching of the feeding network. Mostly because when designing one element I didnt need to put the port in the substrate but on the edge. Therefore, I decided to use lumped ports using a terminal solution type. But, when I want to obtain the impedance it is fixed on a value. Even though I specified NOT to renormalize the terminals. Should I be using another port? Or maybe my terminal solution data report (mag(Zot(1,1)) and mag(Zot(2,2))) is wrong? Thanks in advance.
Sir, After clicking on analyse all ....... it analyses for some time and then says the simulation has completed normally ... but where do i see the radiation pattern and the dB plot u have shown in the video?
right click on Results in your Project Manager -> create terminal solution data report -> rectangular report a screen will pop out. choose whatever you want and then click new report. The figures will show on your main workspace
hi while while analyzing i am getting the below error message .please rectify my error [error] Port '1': Assignment contains entities that do not exist in the model. [error] Simulation completed with execution error on server: Local Machine.
hey kyle, can i know how to contact you in personal as I have few questions which are very confusing because of which I am not able to design an uwb antenna which I am suppose to do
Hi, kyle , i just watched your vedio and have done the simulation, but the results such as S11 and gain are not coming under results even though the software is showing no errors, plssss help.
hi kyle, i am working on a project namely "design of fractal antenna" but i am facing some problems in designing it on hfss. i need some help . can you just give your email id so that i can contact you in detail. plwase its urgent.
Hi Kyle. I just have watched your video. It's really interesting and educating. I am newbie with this software,therefore I have some question regarding the simulation setup on it . Can you share your mail to allow me to send you the question? Alex
The best HFSS Antenna design tutorial. Whenever I need to re-learn the design with HFSS, I immediately start out with this video, thanks mate!
I had the choice between a 200 page HFSS manual or this. I do not regret my choice, very well done
Great, concise and straight to the point. Most other tutorials seem like the presenter is either doing stuff mechanically without much thought or that they don't even know what they're doing/talking about. Cheers!
Probably the best tutorial for hfss I just started today and was able to to do this and actually understand what I was doing thank you so much, it takes a true genius to be able to explain things like this to a beginner!
He speaks! So rare for a HFSS youtube tutorial. LOL
Thanks for the effort nice video!
Your video really helped me, I was so stuck on how to begin using HFSS so I google it and your video was the first one that I found (and the best introduction to HFSS, as far as I'm concerned). Please, continue spreading knowledge!
Greetings from Brazil!
Hello Mr. Davidson,
This video is really knowledgable. Thanks for making this process seem so easy.
I request you to share the formulae to calculate the dimensions of the feed and substrate length & width.
Guys plz like this comment if you too want these dimensions..
Thank you for this nice tutorial. I'd like to remark at 18:25: QW, meaning quarter wavelength, is set to 15 mm. However at 10 GHz we have a wavelength of 30 mm, so QW should be 7.5 mm to avoid confusion. Of course, the air box can be higher than 7.5 mm. In the tutorial the hight is hence half a wavelength, i.e. 15 mm.
This tutorial is the truth, thank you.
Thank you, Kyle, it was really helpful.
Thank you for this! it's a very thorough and well explained video, & it helped a lot! Liked how you added the 8x8 design too :) Cheers!
Hi Kyle, thanks for the great video! I appreciate how you used variables to make it scalable (like a real engineer). I think the only thing lacking is to explain how to display the result plots (S11 and Realized Gain), that would be a good addition. Maybe instead of making a whole new movie you could just add an explanation in the video description?
Hey Scott, thanks for the review. Pretty funny to find one of your best buds in the comments of a video. I'll check it out :)
hello this tutorial has been of great help... but I can't get the simulated results... the patters and waveforms even after repeated trials!
Thanks for taking the effort. Its very nicely demonstrated.
Thanks. Looks very simple to get started.
th-cam.com/channels/pDbCC0-MW7usz87WN9q96w.html
possible to post a video on how to go from single patch to an array?
Which pages form the Balanis book were referenced for the dimensions, and which book edition?
This was so incredibly helpful thank you so much
Where did you get the values from 9:45?
Hi Davidson,
I saw
[info] Normal completion of simulation on server: Local Machine. (1:11:31 下午 二月 26, 2018)
After the simulation, but nothing under the result file, how can I get the graph?
this was extremely helpful , thank you very much !
Sir, Its nice explanation.. Can you share calculation you have did in the background please.
How do I simulate the S11 results?
THanks for ur tutorial. Can u explain me the most important formulas for the dimension of this antenna?
It would be great. I want to design this antenna for 500 MHz. Is it possible or is the frequency too low?
Greetings
How to get the dimensions of the feeder line and micro if I want the impedance matching to 100ohm
the programm does not give the option to change the axis . i do not know why.
hi may i know how type xnull and ynull on keyboard
hi Kyle. Can you please upload any video regarding sierpinsiki triangular fractal antenna designing. I will be highly obliged.
Very helpful sir 💛
Thank u for the video and i have a doubt that, is it possible to design a filter in HFSS?
Can u plz make a video on 4x4 Butler matrix using HFSS at 5.4GHz
Thanks i am looking like these videos thanks for effort nice video
Thanks, you are my hero
hi..can you please explain how to design double sided ( having conducting material on both the side of substrate) micro strip patch antenna in HFSS
Is it linear polarized???
Hey davidson, how to make 8*8 array from a single unit.Is there any simple way to make it using a single unit of antenna ?
Hello Mr. Davidson,
Is there any chance that you have a walkthrough for the entire array antenna or a file that I can study to help me with my undergraduate project? It would help me out greatly. Thank you.
sir how to design the feed for the patch antenna
hey kyle, i made Wilkinson power divider on hfss. while analysing i got error . here i quote .....Project1 (D:/HFSS_project/)
HFSSDesign1 (DrivenTerminal)
[error] Port refinement, process hf3d error: Port 1 does not have a solved inside material on either side.. (12:31:37 AM Aug 27, 2015)
[error] Simulation completed with execution error on server: Local Machine. (12:31:38 AM Aug 27, 2015)
+SUMIT PRATAP SINGH I suspect the port(s) is on the boundary of the simulation, inset it from the edge and the simulation should work.
Thank you so much kyle for your reply. Lemme check this out.
+Kyle Davidson ...sorry . But what do you mean by boundary of simulation?
do we have to provide radiation box to it?
i m not getting the final results of this simulation. Rather its showing "Adaptive passes did not converge based on specified criteria"..what to do???
Kyle Davidson
I'm trying to design a fractal antenna patch using hfss
Could u please guide me how to remove a part of the already made patch on hfss
I'm trying to design Sierpinski carpet for my final year project and before proceeding ahead they want to see the design of the patch and it's simulation
It would mean a lot if u could help
Hi,excellent video.
I need to simulate antenna performance in UHF band in HFSS, can you please help me?
I followed your tutorial and got a radiation pattern that has a maximum of 5dB. What is your methodology for using Optimetrics to tune?
Can someone explain what the S parameter plot is showing mathematically? Minimum value at 10GHz proves it's resonant there? How?
Thanks sir for the video...can u please show how to assign port(lumped and wave)to hfss...and how we know lumped or waveport to assign and exactly where we have to assign these ports....
thank u sir for this video
can u please help me by video to design 16 microstrip regtangular patch array antenna at 2.4 Ghz using hfss
hi davidson,
how i simulate stacked microstrip patch antenna. can you explain it .
you do know stacking . . . dont you .!!!! So if you do then design it already .An antenna is fed and antennas are parasitic . .. . . fed electromagnetically
do we need antenna design kit to be installed in seperate even if we have hfss 15 installed in ??
Hi Kyle, I am designing an antenna array and I am having some trouble when performing the impedance matching of the feeding network. Mostly because when designing one element I didnt need to put the port in the substrate but on the edge. Therefore, I decided to use lumped ports using a terminal solution type. But, when I want to obtain the impedance it is fixed on a value. Even though I specified NOT to renormalize the terminals. Should I be using another port? Or maybe my terminal solution data report (mag(Zot(1,1)) and mag(Zot(2,2))) is wrong? Thanks in advance.
Sir, After clicking on analyse all ....... it analyses for some time and then says the simulation has completed normally ... but where do i see the radiation pattern and the dB plot u have shown in the video?
right click on Results in your Project Manager -> create terminal solution data report -> rectangular report
a screen will pop out. choose whatever you want and then click new report. The figures will show on your main workspace
廖羿翔 thanks sir 😁
Mr kyle i get error when run simulation ( error in local machin ) what does mean that ??💔☹️
Share please the project files for 64 patches array. DropBox or so. Thanks!
hi while while analyzing i am getting the below error message .please rectify my error
[error] Port '1': Assignment contains entities that do not exist in the model.
[error] Simulation completed with execution error on server: Local Machine.
Hi Kyle can i know which mode is this for ?
Hi, Kyle, can you simulation with this antenna ANTENNA LOGARITMICA A 32 ELEMENTI mod. 425010 ASSEMBLAGGIO ANTENNA. pls help me. thanks
sir can you please help me with the feed design of that array???, it will be really helpful to have a tutorial of that as well
sir ,can you please upload the design of array antenna and phased array antenna
hi Kyle,
After analyze all, i have a problem "Adaptive Passes did not converge based on specified criteria"
how can i solve it?
try increasing the number of adaptive passes in Analysis -> Setup -> Properties
hey kyle , could you please upload video on Wilkinson power divider on hfss??
Great video - thanks!
this helped a ton , thanks alot , god bless
hey kyle, can i know how to contact you in personal as I have few questions which are very confusing because of which I am not able to design an uwb antenna which I am suppose to do
how to create 1:2 array rectangular patch???
can you create another video on that that would be helpful
Kyle or anybody out there, please help me with any reference material that can help me simulate a 2.4Ghz slot antenna. Thank you in advance.
I need a help please
Thanks Kyle, But could you explain what do you mean by h=31 ml , do you mean 31 mm? or what is the unit of ml?
+Abdullah Al-Janah
31 mil it is another length unit
wow, just wow!
Hi, kyle , i just watched your vedio and have done the simulation, but the results such as S11 and gain are not coming under results even though the software is showing no errors, plssss help.
B Sandeep Go to HFSS --> Results --> create whatever report you want!
cheers!
Thank you!
Mr. Davidson,
Pls let me know the version of HFSS have you used? is it HFSS 13.0.2 or any other?
Sometimes this video clearly appear to me and sometimes blur... Is any one else facing same problem...
Hi thank you for your tutorial . it would be better to talk a little bit about the physics behind those chosen geometries.
nice video, can you please send me you project.hfss of MIMO antenna, i mean the antenna that you fabricated and thanks
thank you sir
sir, I want Substrate integrated waveguide-based designs, thanks
you are canadian aren't you?
hi kyle, i am working on a project namely "design of fractal antenna" but i am facing some problems in designing it on hfss. i need some help . can you just give your email id so that i can contact you in detail. plwase its urgent.
Hi Kyle.
I just have watched your video.
It's really interesting and educating.
I am newbie with this software,therefore I have some question regarding the simulation setup on it .
Can you share your mail to allow me to send you the question?
Alex
알아듣기가 어려운데 한국어로 말해주세요
video
Gonzalez Michael Moore Amy Davis Michael