I bought a rossi brawler a few weeks ago. I had to order brass to reload 45 colt with.but being a reloader for 44years I know how to improvise I went to harbor freight bought a225 box of nitrile metric o rings . with my reloaded 45acp, 230 gr 900fps ammunition used sizes 8x2mm and 8.8x1.9 o rings pull over bullets to the back of.the 45acp, load and it won't fall down the barrel. with 24 rounds it fired and ejected them all but one, I think I might have put a o ring size 7.8x1.9 on it it came out easy with tip of pocket knife. if you choose to use 45acp factory ammunition use only shells rated 800to 825 fps .I'm not responsible for any ammunition you choose to use.great news if you're a reloader, using Hornaday reloading data center you can use any of there 45colt data and load the 45acp casings but dontload over 14,000 psi because that's the maximum chamber pressure for 45 colt. 45acp has up 18,000- 20,000 psi .that's not safe for 45 colt casings according to maker of the firearm. ruger strong framed pistols and outher brands with superior strength fine.probly today I'll reload some.45 acp emptys with cfe pistol powder, 10.0 gr 1065 fps 13,300 psi ,548 foot pounds of energy hornady 451 😅dia,200gr xtp - hp.this is Hornaday reloading data and safe to shoot in the rossi brawler 45colt/ 410. the way ammunition and prices, availability is today being able to shoot 45acp, 45colt, 410 out of the same gun is a big benefit. papa from the foothills of the blue ridge mountains in NC wishing you well 😊😊
I do like this single shot pistol from what I've seen, but you have released it during a time that 410 ammo is ridiculously hard to find anywhere. It is not your fault, but you will probably lose a lot of potential buyers because of that fact. I will keep an eye out for it just to see it in hand, but the lack of ammo available for it will not allow me to pay much for it. If you sold it with chamber adapters ( 9mm, 22mag, and such ) as a survival gun, you might have more success with sales.
@timmccarver4121 agreed about how awesome short lane adapters are 👍. I only have the ones that go down to 410/45LC. I need to get one to further goes down to 22LR.
Bring back the Thunderbolt rifles. Carbine versions. They are faster than lever guns and you would have no competition in that market. Timberwolves and Thunderbolts are desirable on the used markets. With the resurgence of lever guns, pump actions, with a modern twist, would be a great addition to the gun market.
Yes Sir. right on it. Not worth a penny more, in my opinion, I'd take my Bond rough and rowdy any day. Rossi is going to need some luck to get this one to catch on!!
I'd buy one right now IF....it were chambered for 454cas or 45 70 or 450 bushmaster and the 410. Make it a chambering that's meaningful...Can't shoot #71/2 shot out of rifled barrel and expect it to pattern worth a crap. So it goes up $100 bucks and has two barrels rifled and a smooth bore ....
@@ambienceization So? It doesn't cost any more to ream a longer chamber and the pressure isn't an issue....what's the point? Would you want this in .45colt to stop a bear in AK? .44mag is even a bit light for close up work on dangerous game. It may ent up being a $200 dollar billy club. Good for birds only inside 20 ft.
@@pacman10182 OK...I wouldn't own a poly frame hunting rig, but ATI has been building and selling polymer ARs with pieces of aluminum only at stress points in 223 / 5.56 for a long time ..pressure on 5.56 is in the 50k cup or less range, (copper units of pressure) quite a bit more than 45 70 at 25k cup or less. Using factory load data. The Taurus line has a polymer frame .357mag ...around mid 28k cup or less ..45lc is around 15k max pressure... so yah chamber pressure isn't an issue.....
Moral of the story: the man is dead and the snake now owns the gun.
I do like how the end of the video implies the snake won
Imagine Rossi bringing back the Riot 12 gauge version 🙃
12 gauge/ 50 bmg
This is on my buy list. Really hope you bring the Riot 12 out next.
Hell yeah!
I know that if I found human remains I'd definitely want to leave confusing ballistic evidence from my gun 😂
I bought a rossi brawler a few weeks ago. I had to order brass to reload 45 colt with.but being a reloader for 44years I know how to improvise
I went to harbor freight bought a225 box of nitrile metric o rings . with my reloaded 45acp, 230 gr 900fps ammunition used sizes 8x2mm and 8.8x1.9 o rings
pull over bullets to the back of.the 45acp, load and it won't fall down the barrel. with 24 rounds it fired and ejected them all but one, I think I might have put a o ring size 7.8x1.9 on it
it came out easy with tip of pocket knife. if you choose to use 45acp factory ammunition use only shells rated 800to 825 fps .I'm not responsible for any ammunition you choose to use.great news if you're a reloader, using Hornaday reloading data center you can use any of there 45colt data and load the 45acp casings but dontload over 14,000 psi because that's the maximum chamber pressure for 45 colt. 45acp has up 18,000- 20,000 psi .that's not safe for 45 colt casings according to maker of the firearm. ruger strong framed pistols and outher brands with superior strength fine.probly today I'll reload some.45 acp emptys with cfe pistol powder, 10.0 gr 1065 fps 13,300 psi ,548 foot pounds of energy hornady 451 😅dia,200gr xtp - hp.this is Hornaday reloading data and safe to shoot in the rossi brawler 45colt/ 410. the way ammunition and prices, availability is today being able to shoot 45acp, 45colt, 410 out of the same gun is a big benefit. papa from the foothills of the blue ridge mountains in NC wishing you well 😊😊
Super excited. Can pick up an RP63 and a brawler and be all set. The 357/38 for defense/small game and the Brawler for big game.
The snake pulled his own. Get that money, snake.
I do like this single shot pistol from what I've seen, but you have released it during a time that 410 ammo is ridiculously hard to find anywhere. It is not your fault, but you will probably lose a lot of potential buyers because of that fact. I will keep an eye out for it just to see it in hand, but the lack of ammo available for it will not allow me to pay much for it. If you sold it with chamber adapters ( 9mm, 22mag, and such ) as a survival gun, you might have more success with sales.
Привет ,Джон.А ты не пробовал самостоятельно снаряжать патроны для 410 калибра?Это не сложно!!!
Ordered mine soon as I saw the first review. I use Short Lane adapters that I previously purchased for other firearms. Can't beat them.
@timmccarver4121 agreed about how awesome short lane adapters are 👍. I only have the ones that go down to 410/45LC. I need to get one to further goes down to 22LR.
I’m freaking crying this is so dang funny and such a bad commercial to sell a gun
I know it's an advertisement. But, it sure looks like he missed. 🤣 LoL.
I just ordered one of those Rossi Brawler's. 💯🇺🇸💪🦌
Yes, and 12ga Riot, I'll take one of each!
Dont think thats the best way to go about advertising a gun lol 🤣
Bring back the Thunderbolt rifles. Carbine versions. They are faster than lever guns and you would have no competition in that market. Timberwolves and Thunderbolts are desirable on the used markets. With the resurgence of lever guns, pump actions, with a modern twist, would be a great addition to the gun market.
*Apparent fail. Snake alive, gun discarded in the dirt. Cowboy rode away in disgust.*
First things first....learn how to shoot ...hit what you need to😆🤣🤔
Obviously the snake killed the cowboy which is why the gun is laying there
will the barrel and stock off the tuffy fit this?
You guys should have made it a combo pistol like the Rossi Matched Pair Pistol you guys discontinued a decade ago
...he missed???
A single-shot as choice for self-defense? I wouldn't want to bet all my chips on one roll of the dice!
A version chambered for 30-30 would be ideal for metalic targets
we NEED the riot 12
i really hope that guy in this video knows a rattle snake can strike the length of it's body.....
The snake lived? Should have used a stone!😁
I'd pay about $100
Yes Sir. right on it. Not worth a penny more, in my opinion, I'd take my Bond rough and rowdy any day. Rossi is going to need some luck to get this one to catch on!!
sold lol
Хорошая реклама!!!
Snub nose revolver rossi please😭😭
Just ordered mine. $200
I'd buy one right now IF....it were chambered for 454cas or 45 70 or 450 bushmaster and the 410. Make it a chambering that's meaningful...Can't shoot #71/2 shot out of rifled barrel and expect it to pattern worth a crap. So it goes up $100 bucks and has two barrels rifled and a smooth bore ....
Sure a .45-70 in a 9" barrel😂IT's a $200 dollar gun bruh
@@ambienceization So? It doesn't cost any more to ream a longer chamber and the pressure isn't an issue....what's the point? Would you want this in .45colt to stop a bear in AK? .44mag is even a bit light for close up work on dangerous game. It may ent up being a $200 dollar billy club. Good for birds only inside 20 ft.
@@scuba1088 "the pressure isn't an issue" polymer frame dude
@@pacman10182 OK...I wouldn't own a poly frame hunting rig, but ATI has been building and selling polymer ARs with pieces of aluminum only at stress points in 223 / 5.56 for a long time ..pressure on 5.56 is in the 50k cup or less range, (copper units of pressure) quite a bit more than 45 70 at 25k cup or less. Using factory load data. The Taurus line has a polymer frame .357mag ...around mid 28k cup or less ..45lc is around 15k max pressure... so yah chamber pressure isn't an issue.....
@@scuba1088 it's not a polymer bolt and barrel extension