I had this issue on my 2009 Dodge Challenger R/T. The ESP BAS lights would come on after making a left-hand turn when the directional signal canceled. I discovered that if I manually canceled the directional signal following a left-hand turn before it canceled automatically, the ESP BAS lights did not come on. I also had codes C121A and C2205. I drove it that way for about two years. I discovered recently that the cruise control wasn't working as well. I just tried the simple procedure you explained and it corrected the problem with the ESP and BAS lights coming on. The cruise control also works now! Thanks so much!
Ok so i had this light on n off for about a year. Had a diagnostic it said the angle sensor. Few mechanics told change it etc. i tried this and IT WORKED! Ran it few weeks now to make sure before i commented. Gotta be honest idoubted it would work but thanks man!👍
Thanks for sharing. Most mechanics get paid to replace. Fixing something that takes 20 mins means less money for them. Oh and u don't kneed them. Hope people learn about this "secret". Save 💰!
I watched this video a couple months ago and finally got around to doing this a few days ago and it fixed mine. I got that code every time i turned left. Had to come back and give a thumbs up and say thanks.
oh yes!! I was skeptical at first of course.i want to thank you for posting this video and knowledge.thank you so much.none of us car people can stand lights like this.thank you.
I replaced my multifunctional switch and clock spring about a year ago and the BAS light has been on ever since. I did this procedure and it went out!!!!! Thank You so much for this video.
I'm so glad this helped I only wish you could have saved money before buying the parts, but at least knowing the lights do not come on for you anymore is great and I am assuming that your traction is now good which should keep you safer on the roads!
Oh, I had to change the multi-function switch in order to get the wipers to work at the correct speed and the new switch cured that problem. The clock spring broke and the signal lights were not turning off and the clock spring fixed that problem. So, I didn't waste any money. I just coudl not get the BAS light to go out until I saw your video! Thanks Again!!!
Aye so my turn signals don't go off by themselves either...plus my BAS light and traction light is on too...so I most likely need to change the cLock spring or the steering sensor?
after change the multifunctionalswitch the BAS light comes on and stay.after surching in the web for my problem i see this video .and its works .thank you so much.
Thanks in advance. I will try this tomorrow. I have been dealing with this issue for about a month now. Also I think both lights together = limp mode, so I gotta get that fixed. Thanks again.
I had a mechanic try to read the codes today, they don’t bring in a check engine light, so my $50.00 scanner won’t see anything. Well I’m sure his is 100x better but all he could was pull up history on his scanner. I don’t think he tried hard enough for free lol.
Thank you my brother I just fix my vehicle my Chrysler it was a simple fix. May God continue to bless you and your family and we need more people in the world like yourself helping someone out😊😎❤️👍🏾🙏🏾👍🏾🙏🏾🙏🏾👍🏾🙏🏾👍🏾💯💯💯💯🏆🏆🏆🏆🏆
Thank you so much!!! That's why I create all these videos to help people out. Its my small way of giving back because I too have learned from others videos in accomplishing all sorts of stuff.
The sensor can be reset after you unhook the battery for 30 mins then reconnect and drive it for 5 mins. I had this same issue on my Chrysler 200. Never had to replace any of the items that is talked about in the video
This totally worked. Thanks so much. ‘07 Challenger SRT8. I actually did have a broken clock spring (plastic ring that engages the column had broken off and also took out the turn signal mechanism where it wouldn’t turn off automatically after completing a turn). I replaced both the turn signal module and clock spring. Did the SAS as well since I was there but come to find out, the old SAS was good. But when I put everything back together, and did the turning the wheel to calibrate it, the light would go off after driving, only to come back after a slight turn to the left. It was driving me insane. Then ran into your video, just did this and light is gone 🤞🏻. It seems the whole SAS/Clockspring unit need to be forward (towards you) all the way before tightening the sleeve that holds it to the steering column for it to work as it should 🤷🏻♂️. Also though a T30 works, the actual screw at least in my case is a metric 4 Allen (I did have this apart that’s how I know). Thanks again. 👏🏻
@@FixCarYourself I already did and it came out P0882 tcm power input signal low, P0846 transmission fluid pressure sensor B, C, D, E P0871, P0076, P0988
@@oscargonzalez6195 Hard to say, that's a lot of codes, so not fully sure, but it sounds like the transmission valve body and/or solenoids need to be replaced, as well as new transmission oil.
I fixed mine by doing something like he did. All I did was have my car in park and turn the steering wheel all the way to the left for 2 seconds and the right for two seconds and then left again and then middle and it turned off before I was able to leave my driveway. I didn’t have to use the screw driver at all
Give it a try, and let us know. I wouldn't be surprised if it also worked on the Nitro. Lot of components are shared between Chrysler, Dodge, and Jeep.
Try this quick procedure. I drove for I think a few months with this code on, and I don't believe I had any problems. Let us know if this worked for you.
2005 Dodge Magnum ...ABS light, BAS light and traction light on....my turn signals do not disengage after turning plus horn not working....I replaced all four abs speed sensors first... haven't went further than that yet....heard clock spring could be the culprit and SAS sensor too....seems to me both probably need to be replaced....and suggestions or help if u know what the problem is. Thanks
Hi found out the problem....my clock spring was indeed broken I replaced it now my turn signal disengages like it should.. My car was not equipped with a steering angle sensor, but I ordered and installed one anyways. ABS light were still on after all this...put a high tech diagnostic scanner on my car and found out that my abs control module was bad...(U0121 Lost Communication with Anti-Lock Brake Module). Got another one and reprogrammed to my car...all lights gone now.
My ESP and Bas comes on but only when I'm at a fast food restaurant idling in the car's been sitting for awhile, I just turn the car off and turn it back on and it goes away it rarely comes only when I'm standing still
Is this permanent fix or temporary till you get the steering angle fix cause I have 3 lights on abs esp and traction light on will this fix my problem?
@@FixCarYourself I have the same 3 lights on, sometimes they turn on and sometimes they turn off. My jeep has been checked and the mechanic says it’s just an electronic issue and that it shouldn’t cause any problems but I just feel very anxious having these lights. If I try this and they go away forever, does that mean that there’s no problem? Sorry if it doesn’t make sense I really don’t know anything about cars :(
My guess is it will becuase Dodge and Chryser share similiar parts. Not much to lose just need a torx screwdriver. Let us know if this fixes your vehicle.
Well on my 07 Chrysler 300 I get the traction control light and esp/bas light on every so often and now my turn signal won't cancel which I am sure the clock spring done
I tried this on my 2010 challenger SE and it didn’t work. I unscrewed it 5-6 times then went up top to move it out like you did and you can’t with the steering wheel locked so I unlocked it moved it out (the steering wheel more towards me) and then screwed it back tighter and didn’t work. Am I doing this right? I couldn’t see clearly what you were holding in the video with your left hand while you were turning it
I believe my steering wheel was locked when I did this, meaning the key is in the off position or not plugged in. Also this Chrysler 300 has a tilt steering which allows me to move it up and down in this case without any key being plugged in. Anyway to help troubleshoot, my left hand is firmly grabbing the piece (of which has no name) and it kinda looks like its sliding towards me. Once I bring it towards me, I then tightened the screw on the bottom while still holding that piece with my left hand. Also make sure you check your code reader to determine the problem, as for me anyway this procedure applies to the codes mentioned: C121A and C2205.
@@jasoncasillas8688 Cool! BTW which wheel speed sensor? I have a different video you can watch...as sometimes the problem isn't the speed sensor but is actually a bad CV joint tone ring. If you already completed the job let me know otherwise if you need any other suggestions I'll try to help. Let me know. But glad this helped!
So I have a 06 charger with this issue I’m about to order a clock spring because my horn, signals, wipers or Cruise control will not work along with these lights on do you know if the clock spring is the cause of this ?
Its possible. If you could check a code reader that would help confirm the issue or at least narrow down the problem. Also before ordering it see 1st if this less than 10 min fix resolves your issue. I would rather you try this first and save money before making a purchase.
Pull it towards you.... To further explain: what happened with these vehicles is it got loose over time and was moved back or away from the steering column. This is why you need to pull it towards you or closer in line with the steering column and retighten the screw so it doesn't get loose again.
The ESP/BAS light being on won't prevent you from using Cruise Control on its own, however, both the Steering Angle Sensor and the Cruise Control Switch plug directly into the Steering Column Control Module. So if there is a problem with the SCCM, it could theoretically cause both your ESP/BAS light to come on and Cruise Control to not work, but the ESP/BAS light being on is not the direct cause of the lack of Cruise Control on its own. Not sure if this fix would work for an SCCM issue.
i have 2005 dodge magnum ...BAS light, traction light, and ABS light on....I changed all 4 speed sensors on all four wheels...All lights still on...I see that it is possibly the steering angle sensor (plus my turn signals are not turning off on their own too). Any help or possible solutions
Do u have Instagram I can send u a video...I have not had it diagnosed yet...I have a Diablo Sport In tune I1000, but it doesn't show a code for it...can I got to AutoZone or parts store and find out?
@@kb._4 A video won't help me yet. Its the codes that are necessary to drill down the problem first. But Yes go to those stores and get the code or codes. However, you really should buy a code reader, which is a good investment. Also, you'll need a code reader sooner than later to clear any codes that were previously stored on the car if any. Something they might not do for free.
My 08 Daytona has the Brake, car with swerve, and esp lights come on. But they arent always on. At a loss. Like mine wouldn't be on when I start the car like youra
@@markgil9249 it honestly took care of itself. I will have to think a bit and get back to you. But I recall starting the car. Turning traction control off, on and then going on a short drive and it never came back. The problem originally started after I turned traction control off for a second. Then the next time I got in the car the lights started
Trying on my 2010 Dodge Challenger se tomorrow morning ,I’ll give y’all back some feedback ,I’ve heard that it can be exhaust pipe since my challenger is straight pipes but I will find out for yall tomorrow thank you !!
Never mind just tried it and the esp bas did go off ,it’s night time now ,did a quick drive around and drove around kinda aggressive to see if a bump or anything like that will trigger it back on but it didn’t ,I’m gonna take a hour ride tomorrow morning and I’ll give y’all feedback from there !
Just took that hour road trip ,light did not come back on !! Surprised me ,I will come back and leave feedback if it does turn back on ,if not thank you so much 🙏
I get those same lights on when i turn on my car after using it for a while, i put my key in to the on position and it doesn't let me put the car in gear and also the engine turns for several seconds and then it starts. Can that also be the problem? Does anybody know what it could be?
This is really frustrating, i took my car to the mechanic and he told me it was the cam and crank sensors that were going bad i replaced them and nothing. Then he told me it was a weak battery got rhe battery checked and its at 94% so its strong then he told me it was the starter and i also replaced it and nothing. I really need help.
Will this give a lighting bolt light cause my magnum idles up and down and no gas pedal after i took a hard left turn i replaced gas pedal and throttle body and still no throttle
I was called to another garage to fix a 2005 300c chrysler. The problems they noticed with the car was Hard or no start, red lightning bolt flashing, no throttle response, headlight stays on, immediate stalling after starting and rough idle throughout idling as a result a new PCM was replaced with a new one however problem still persisted. I scanned for DTC codes and saw a P0340, P2167, P2166, P2115, P2116, p0603 and more module codes like C2202, U0168, U1414, B1A25, etc.
@@FixCarYourself 2005 v6 300c Chrysler car had Hard, stalling or no start. In addition, red lightning bolt was steadily on, no throttle response, immediate stalling after starting and rough idle throughout idling as a result an old PCM was replaced with a new one however problem still persisted. I scanned for DTC codes and saw a P0340, P2167, P2166, P2115, P2116, p0603 and more module codes like C2202, U0168, U1414, B1A25, etc. Please help me! How can I fix those problems? The major problem is that whenever the red round light probably, the security and battery light remains ON, the car won't start at all. However, even if it does start by chance, the car would definitely stall immediately. On the otherhand , if the red perhaps security light blinks and battery light goes off, it will have only hard starting but would definitely start. Firstly, how can I fix the security issue? The client said: "he doesn't want anything security in the car anymore." How should I proceed to disable that security completely? It's because of that that made the engineer encourage them to get a new ECU. Please🙏, help me with the repair procedure and also wiring diagram showing power distribution layout identification for the engine bay and rear fuse. click on the link below to watch and guide me on what to do next. th-cam.com/video/omRXM_SU0OI/w-d-xo.html
Is the replacement ECU PCM brand new or from a used vehicle? Also, did you try replacing any relay fuses 1st? Here is a video I made about replacing relay fuses.
I have the same problem with my car is a 300 (2006) but I do not understand English use a translator I would appreciate it if you gave me instructions to prescribe it
Chrysler shares lots of similar parts so it may work. Give it a try not much to lose. its just unscrewing a screw and then re-tightening it. The screwdriver is cheap. Please let us know if it worked for you.
Yep that's right, pull it towards you....To further explain: what happened with these vehicles is it got loose over time and was moved back or away from the steering column. This is why you need to pull it towards you or closer in line with the steering column and retighten the screw so it doesn't get loose again.
@FixCarYourself you think if i change the computer cuz my code says steering angle sensor not initialized? I mean got the throttle body code out but the yellow one 🙅♂️ nope
The reset prob cleared it not adjusting the cover ( resetting the steering angle sensor turn key on and rotate wheel full left full right then center and drive the car)
you could just reset it with a code reader scanner. But i tried it and the codes came back on pretty fast. In general turning the wheel left to right back in center, may work. In my case I had to unscrew and then tighten the screw to fix the problem.
If you loosened the screw a few times and pushed the cover towards you hard and then re tightened it while holding it then turned the wheel 2 times to the right and then the left and it still doesn't work after driving it for a little bit then a SAS may actually need to be replaced. Usually its becomes misaligned as a result of going over bumps over the years.
My lights just came on tonight while I was driving my headlights turned out and those lights came on I turn my headlights on instead of Auto lights by the time I got to my destination turn the car off and back dash lights were out
I had this issue on my 2009 Dodge Challenger R/T. The ESP BAS lights would come on after making a left-hand turn when the directional signal canceled. I discovered that if I manually canceled the directional signal following a left-hand turn before it canceled automatically, the ESP BAS lights did not come on. I also had codes C121A and C2205. I drove it that way for about two years. I discovered recently that the cruise control wasn't working as well. I just tried the simple procedure you explained and it corrected the problem with the ESP and BAS lights coming on. The cruise control also works now! Thanks so much!
Good info, but glad you ultimately fixed it!
Ok so i had this light on n off for about a year. Had a diagnostic it said the angle sensor. Few mechanics told change it etc. i tried this and IT WORKED! Ran it few weeks now to make sure before i commented. Gotta be honest idoubted it would work but thanks man!👍
Thanks for sharing. Most mechanics get paid to replace. Fixing something that takes 20 mins means less money for them. Oh and u don't kneed them. Hope people learn about this "secret". Save 💰!
J😅😊yjjjjj😊😊uf😊yu
5:56
Had to come find this video, sense my 08 magnum was doing this. The truck worked like a charm, no more light. Appreciate that my man.
awesome!!! glad it helped and that you saved money !!! and time from going into a dealership.
I watched this video a couple months ago and finally got around to doing this a few days ago and it fixed mine. I got that code every time i turned left. Had to come back and give a thumbs up and say thanks.
Glad it worked and thanks for letting me know this video has made a difference for so many other people.
السلام عليكم ممكن مخطط ايABS دوج جارجر اس ار تي موديل 2009 واتشكرك جزيل الشكر@@FixCarYourself
oh yes!! I was skeptical at first of course.i want to thank you for posting this video and knowledge.thank you so much.none of us car people can stand lights like this.thank you.
I replaced my multifunctional switch and clock spring about a year ago and the BAS light has been on ever since. I did this procedure and it went out!!!!! Thank You so much for this video.
I'm so glad this helped I only wish you could have saved money before buying the parts, but at least knowing the lights do not come on for you anymore is great and I am assuming that your traction is now good which should keep you safer on the roads!
Oh, I had to change the multi-function switch in order to get the wipers to work at the correct speed and the new switch cured that problem. The clock spring broke and the signal lights were not turning off and the clock spring fixed that problem. So, I didn't waste any money. I just coudl not get the BAS light to go out until I saw your video! Thanks Again!!!
Aye so my turn signals don't go off by themselves either...plus my BAS light and traction light is on too...so I most likely need to change the cLock spring or the steering sensor?
This worked for me, really helps with a computer that you can read the live data from the steering angle aswell to make sure it’s at 0 degrees.
Interesting...nice input!
after change the multifunctionalswitch the BAS light comes on and stay.after surching in the web for my problem i see this video .and its works .thank you so much.
Glad it helped and that this video did the trick for you!.
I have a 2010 charger and the turn to the left twice n turn to the right twice then back to the middle worked for me, thank u so much
Glad it helped. BTW this would also be good to do after your battery is replaced.
This method really fix that for my old car. Thank you.
Glad it helped
Thanks in advance. I will try this tomorrow. I have been dealing with this issue for about a month now. Also I think both lights together = limp mode, so I gotta get that fixed. Thanks again.
Thanks and If you can confirm with a scan tool what the codes are to narrow down the problem.These lights could mean all kinds of crazy codes.
I had a mechanic try to read the codes today, they don’t bring in a check engine light, so my $50.00 scanner won’t see anything. Well I’m sure his is 100x better but all he could was pull up history on his scanner. I don’t think he tried hard enough for free lol.
Thank you my brother I just fix my vehicle my Chrysler it was a simple fix. May God continue to bless you and your family and we need more people in the world like yourself helping someone out😊😎❤️👍🏾🙏🏾👍🏾🙏🏾🙏🏾👍🏾🙏🏾👍🏾💯💯💯💯🏆🏆🏆🏆🏆
Thank you so much!!! That's why I create all these videos to help people out. Its my small way of giving back because I too have learned from others videos in accomplishing all sorts of stuff.
I wish you were more success in your personal life and your TH-cam channel as well 😊❤️🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾💯💯💯💯💯💯💯💯💯💯
Just tried it today and it worked!!!! We'll see how long it lasts
The sensor can be reset after you unhook the battery for 30 mins then reconnect and drive it for 5 mins. I had this same issue on my Chrysler 200. Never had to replace any of the items that is talked about in the video
Didn't work for me on my dodge nitro 2008
This totally worked. Thanks so much. ‘07 Challenger SRT8. I actually did have a broken clock spring (plastic ring that engages the column had broken off and also took out the turn signal mechanism where it wouldn’t turn off automatically after completing a turn). I replaced both the turn signal module and clock spring. Did the SAS as well since I was there but come to find out, the old SAS was good. But when I put everything back together, and did the turning the wheel to calibrate it, the light would go off after driving, only to come back after a slight turn to the left. It was driving me insane. Then ran into your video, just did this and light is gone 🤞🏻. It seems the whole SAS/Clockspring unit need to be forward (towards you) all the way before tightening the sleeve that holds it to the steering column for it to work as it should 🤷🏻♂️. Also though a T30 works, the actual screw at least in my case is a metric 4 Allen (I did have this apart that’s how I know). Thanks again. 👏🏻
Thanks, great info and for detailing your troubleshooting!!!
👍👍👍
Very vauluable knowledge for others!
Thanks the the great info i was dreading tearing into my steering column and will try this on my 07 dodge plum crazy and hope for the best !!!
Great! Let us know if it works for you and saves you time.
Thanks for the . video just happen to me recently. But the lights finally when off
Right on... I had to do it twice but it worked for my 2009 charger thanks alot big guy...👍🏻
GREAT! I've heard sometime you got to fumble with it to get it nice and tight.
Does it come back on after cutting the car off then cranking it back up?
nope
Good Repair Video!
Glad you enjoyed it
Should I do this before or after an alignment because my steering wheel isn’t straight when the wheels are
It doesn't matter.
Thank you buddy works perfect for me no more light on
It worked, I’ve had this light on for almost a year and just saw this video, thank you for the info!
Glad it helped. I too know this is a big sense of relief. Hopefully you didn't spend any 💰 .
@@FixCarYourself no, I do research before I buy thankfully, call it cheap but to me it’s better than spending $60 up on a new sensor
I love that his torx driver is made in the USA like his car
I wish more things were made locally!
I got a few codes
C1035
C1032
C121A
💪🏼💪🏼💪🏼💪🏼🔥🔥🔥🔥 def works, no light, and super smooth turning, preciate the video👍👍👍
My 2006 jeep commander 5.7 randomly shutdown while driving after that ESP, BAS, and traction light came one. What can I check in order to fix it?
Hook up a code reader 1st to see the troubleshooting codes, this will help you narrow down the issue.
@@FixCarYourself I already did and it came out P0882 tcm power input signal low, P0846 transmission fluid pressure sensor B, C, D, E P0871, P0076, P0988
The last codes are the other sensor from transmission fluid.
@@oscargonzalez6195 Hard to say, that's a lot of codes, so not fully sure, but it sounds like the transmission valve body and/or solenoids need to be replaced, as well as new transmission oil.
@@FixCarYourself Oh ok I'm going to take to the mechanic this saturday, thank you so much for your time.
Could you please help. Just to clarify is it 2 right 2 left center or 2 left 2 right center. Thank you.
2 left (Counter clockwise) then 2 Right (Clockwise) and then put it back to the center.
Thank you!!! It worked for me!! Just did it myself!!!
Yeahhh!!!! It’s works in a Jeep Liberty. Thanks!!!
Nice. I figured it would work for probably all the Chrysler, Dodge, and Jeep vehicles.
Worked great even without using the screw driver for my 2010 Chrysler 300 code c2204
Do this work for the 2013 Chrysler c 5.7L as well?
Others have said so. But let us know if your results are the same.
Does anyone know if this effects my blinker or breaklight, changed them both test said I needed steering sensor, haven't tried this yet
Try this...it doesn't hurt, but this shouldn't effect the blinker.
Worked like a charm! Tyvm!
Will this work on my 2010 charger
Yep it should.
I have the dodge charger with the same issue,Is this gonna work for that?
It should if you have the same codes and problem. Lot of other people in the comments have said it worked for them.
Let me know if it works for you.
@@FixCarYourself sure
Used a Torqued T30x4" screw driver.
Awesome!!! Glad it worked.
I fixed mine by doing something like he did. All I did was have my car in park and turn the steering wheel all the way to the left for 2 seconds and the right for two seconds and then left again and then middle and it turned off before I was able to leave my driveway. I didn’t have to use the screw driver at all
Great! That is actually what you should do 1st before you do the screwdriver thing. So great job!
What about on a dodge nitro. The only light thats on is my esp bas light
Give it a try, and let us know. I wouldn't be surprised if it also worked on the Nitro. Lot of components are shared between Chrysler, Dodge, and Jeep.
Exelente video ,si funciona!
Thanks!
I have a 2007 Chrysler 300c 5.7 I have 2 abs codes stored that I can’t figure what to do.
C121A
C2206
And is it safe to drive ?
Try this quick procedure. I drove for I think a few months with this code on, and I don't believe I had any problems. Let us know if this worked for you.
Thank you. my brother has solved his problem Thanks to you.
Thanks. Fixed a 2010 Dodge Charger SXT. Great video.
Wonderful! And thanks 😊.
2005 Dodge Magnum ...ABS light, BAS light and traction light on....my turn signals do not disengage after turning plus horn not working....I replaced all four abs speed sensors first... haven't went further than that yet....heard clock spring could be the culprit and SAS sensor too....seems to me both probably need to be replaced....and suggestions or help if u know what the problem is. Thanks
Plug a code reader in, and let me know the codes?
Hi, were you able to fix this? Dealing with the same issue
Hi found out the problem....my clock spring was indeed broken I replaced it now my turn signal disengages like it should.. My car was not equipped with a steering angle sensor, but I ordered and installed one anyways. ABS light were still on after all this...put a high tech diagnostic scanner on my car and found out that my abs control module was bad...(U0121 Lost Communication with Anti-Lock Brake Module). Got another one and reprogrammed to my car...all lights gone now.
My ESP and Bas comes on but only when I'm at a fast food restaurant idling in the car's been sitting for awhile, I just turn the car off and turn it back on and it goes away it rarely comes only when I'm standing still
Is this permanent fix or temporary till you get the steering angle fix cause I have 3 lights on abs esp and traction light on will this fix my problem?
Permanent. Over 4 years later and the lights haven't come back on.
@@FixCarYourself I have the same 3 lights on, sometimes they turn on and sometimes they turn off. My jeep has been checked and the mechanic says it’s just an electronic issue and that it shouldn’t cause any problems but I just feel very anxious having these lights. If I try this and they go away forever, does that mean that there’s no problem? Sorry if it doesn’t make sense I really don’t know anything about cars :(
@@andreamercado1201 yep. In my case the lights have not returned since.
@@FixCarYourself thank you
@@andreamercado1201 hope it works for you.
Will this work for a Dodge Ram 1500
My guess is it will becuase Dodge and Chryser share similiar parts. Not much to lose just need a torx screwdriver. Let us know if this fixes your vehicle.
Well on my 07 Chrysler 300 I get the traction control light and esp/bas light on every so often and now my turn signal won't cancel which I am sure the clock spring done
Ok, so did you try this procedure? Also check the fuses/relays for the wiper switch.
@@FixCarYourself I am going to replace both clock spring and turn signal multi function switch I am sure they are broken inside
Did you replace it or try this procedure first?
I tried this on my 2010 challenger SE and it didn’t work. I unscrewed it 5-6 times then went up top to move it out like you did and you can’t with the steering wheel locked so I unlocked it moved it out (the steering wheel more towards me) and then screwed it back tighter and didn’t work. Am I doing this right? I couldn’t see clearly what you were holding in the video with your left hand while you were turning it
In other words when the steering wheel is locked you can’t pull it out so I unlocked steering wheel to pull it out and tightened it didn’t work
I believe my steering wheel was locked when I did this, meaning the key is in the off position or not plugged in. Also this Chrysler 300 has a tilt steering which allows me to move it up and down in this case without any key being plugged in. Anyway to help troubleshoot, my left hand is firmly grabbing the piece (of which has no name) and it kinda looks like its sliding towards me. Once I bring it towards me, I then tightened the screw on the bottom while still holding that piece with my left hand. Also make sure you check your code reader to determine the problem, as for me anyway this procedure applies to the codes mentioned: C121A and C2205.
@@FixCarYourself Thank you for your reply! It ended up being a wheel speed sensor I appreciate your help though!
@@jasoncasillas8688 Cool!
BTW which wheel speed sensor? I have a different video you can watch...as sometimes the problem isn't the speed sensor but is actually a bad CV joint tone ring. If you already completed the job let me know otherwise if you need any other suggestions I'll try to help.
Let me know.
But glad this helped!
@@FixCarYourself Thanks man! It was the left rear.
عندي كودات مشتغلات abs esp ومانع الانزلاق سياره كرايسلر 2010
Did it work?
Thanks it worked and I didn’t have to buy the screwdriver.
What did you use in place of the screwdriver?
Is it OK to drive with those codes on
I did for about 6 months.
ThNk u
So I have a 06 charger with this issue I’m about to order a clock spring because my horn, signals, wipers or Cruise control will not work along with these lights on do you know if the clock spring is the cause of this ?
Its possible. If you could check a code reader that would help confirm the issue or at least narrow down the problem. Also before ordering it see 1st if this less than 10 min fix resolves your issue. I would rather you try this first and save money before making a purchase.
I have a 2010 challenger and just put new abs sensors and a new angle sensor and did this and the lights still don’t turn off what can it be?
what codes do you have?
@ 4:15sec When you say push forward. Are you pushing to the front of the car or rear of car. It looks like you are pulling to the rear?
Bring the piece towards you to lock it in place. Aka going towards the rear of the car.
Do u push it forward or pull it toward yourself and then tighten..
Pull it towards you.... To further explain: what happened with these vehicles is it got loose over time and was moved back or away from the steering column.
This is why you need to pull it towards you or closer in line with the steering column and retighten the screw so it doesn't get loose again.
@@FixCarYourself ok cool thanks...
@@1942808no problem! let me know if it fixes your problem.
@@FixCarYourself will do
I've got the same lights but no engine codes. Could that be something different?
I tried it, i guess it doesn't work on the charger(2006) police package, any advice
Same problem on my 06 300 bas light, reaction control light, and ABS light on 🤷 any ideas ? I do have a code it's c123f
did your cruise control work whilebthe lights were on?
Not sure I never use cruise control
no it doesnt let u use it
The ESP/BAS light being on won't prevent you from using Cruise Control on its own, however, both the Steering Angle Sensor and the Cruise Control Switch plug directly into the Steering Column Control Module. So if there is a problem with the SCCM, it could theoretically cause both your ESP/BAS light to come on and Cruise Control to not work, but the ESP/BAS light being on is not the direct cause of the lack of Cruise Control on its own. Not sure if this fix would work for an SCCM issue.
Thanks man. Seems to have worked just doing the wheel turn.
Mine did not work! I have the ABS, DTC, ESp and a red light in between the gas and speedometer gauge...
To you fix this problem?
Same here!:( Any solution please help
i have 2005 dodge magnum ...BAS light, traction light, and ABS light on....I changed all 4 speed sensors on all four wheels...All lights still on...I see that it is possibly the steering angle sensor (plus my turn signals are not turning off on their own too). Any help or possible solutions
What codes do you have?
Do u have Instagram I can send u a video...I have not had it diagnosed yet...I have a Diablo Sport In tune I1000, but it doesn't show a code for it...can I got to AutoZone or parts store and find out?
@@kb._4 A video won't help me yet. Its the codes that are necessary to drill down the problem first. But Yes go to those stores and get the code or codes. However, you really should buy a code reader, which is a good investment. Also, you'll need a code reader sooner than later to clear any codes that were previously stored on the car if any. Something they might not do for free.
My 08 Daytona has the Brake, car with swerve, and esp lights come on. But they arent always on. At a loss. Like mine wouldn't be on when I start the car like youra
Same here did you figure it out?
@@markgil9249 it honestly took care of itself. I will have to think a bit and get back to you. But I recall starting the car. Turning traction control off, on and then going on a short drive and it never came back. The problem originally started after I turned traction control off for a second. Then the next time I got in the car the lights started
Como puedo quitar eso tengo el mismo problema
Does this problem cause the car to shake or jerk right before the light code comes on? That’s the problem I’m having
Yes it's real quick. More of a jerk than a shake in my opinion.
Works on chrysler town country??
give it a shot and let us all know if it does.
Trying on my 2010 Dodge Challenger se tomorrow morning ,I’ll give y’all back some feedback ,I’ve heard that it can be exhaust pipe since my challenger is straight pipes but I will find out for yall tomorrow thank you !!
Never mind just tried it and the esp bas did go off ,it’s night time now ,did a quick drive around and drove around kinda aggressive to see if a bump or anything like that will trigger it back on but it didn’t ,I’m gonna take a hour ride tomorrow morning and I’ll give y’all feedback from there !
Cool!
Not sure how this would have to do something with exhaust pipes. But you never know with these kind of cars. keep us posted!
Just took that hour road trip ,light did not come back on !! Surprised me ,I will come back and leave feedback if it does turn back on ,if not thank you so much 🙏
@@bryantvalenzuela2497 Glad it helped! And gives you piece of mind, and thanks for your input this should help a lot of other viewers!
What if the screw is missing? Imma check the fuse first....
That doesn't sound too good. Their should be a screw there.
I get those same lights on when i turn on my car after using it for a while, i put my key in to the on position and it doesn't let me put the car in gear and also the engine turns for several seconds and then it starts. Can that also be the problem? Does anybody know what it could be?
My journey is doing same thing , was this th problem?
Did you ever figure out the problem?
This is really frustrating, i took my car to the mechanic and he told me it was the cam and crank sensors that were going bad i replaced them and nothing. Then he told me it was a weak battery got rhe battery checked and its at 94% so its strong then he told me it was the starter and i also replaced it and nothing. I really need help.
And NO i didn't figure it out 🤬
All good
Will this give a lighting bolt light cause my magnum idles up and down and no gas pedal after i took a hard left turn i replaced gas pedal and throttle body and still no throttle
Nope sounds like a different problem.
Does it need a throttle body relearn?
Not sure specifically but it sounds like it involves the throttle body.
Michael Fults check the egr O-Ring gasket
Bro thank you so much I would of never thought about that Ive been putting money an time into that damn light thank you so much bro
Hopefully you didn't waste that much time or money. Regardless, now its time to move on in a good way!
Will this work for Dodge caliber 2009
It should. Let us know if it worked for u. Its quick and easy.
I fixed the problem Chrysler 2010
I have a 2008 dodge grand caravan and the turning of the steering wheel calibration worked
Cool thanks for letting us all know. I figured this situation would apply to many other Dodge, Chrysler, and maybe even Jeep vehicles.
I was called to another garage to fix a 2005 300c chrysler. The problems they noticed with the car was Hard or no start, red lightning bolt flashing, no throttle response, headlight stays on, immediate stalling after starting and rough idle throughout idling as a result a new PCM was replaced with a new one however problem still persisted.
I scanned for DTC codes and saw a P0340, P2167, P2166, P2115, P2116, p0603 and more module codes like C2202, U0168, U1414, B1A25, etc.
Ok, did you fix your problem?
@@FixCarYourself I didn't yet. My phone is pretty low now if I get it charged, I'll send you an update.
@@FixCarYourself 2005 v6 300c Chrysler car had Hard, stalling or no start. In addition, red lightning bolt was steadily on, no throttle response, immediate stalling after starting and rough idle throughout idling as a result an old PCM was replaced with a new one however problem still persisted.
I scanned for DTC codes and saw a P0340, P2167, P2166, P2115, P2116, p0603 and more module codes like C2202, U0168, U1414, B1A25, etc.
Please help me! How can I fix those problems?
The major problem is that whenever the red round light probably, the security and battery light remains ON, the car won't start at all. However, even if it does start by chance, the car would definitely stall immediately.
On the otherhand , if the red perhaps security light blinks and battery light goes off, it will have only hard starting but would definitely start. Firstly, how can I fix the security issue? The client said: "he doesn't want anything security in the car anymore." How should I proceed to disable that security completely? It's because of that that made the engineer encourage them to get a new ECU.
Please🙏, help me with the repair procedure and also wiring diagram showing power distribution layout identification for the engine bay and rear fuse. click on the link below to watch and guide me on what to do next.
th-cam.com/video/omRXM_SU0OI/w-d-xo.html
Is the replacement ECU PCM brand new or from a used vehicle? Also, did you try replacing any relay fuses 1st? Here is a video I made about replacing relay fuses.
Also, here is a video on how to test a relay fuse: th-cam.com/video/B5Yt1CnE9CE/w-d-xo.html
I have the same problem with my car is a 300 (2006) but I do not understand English use a translator I would appreciate it if you gave me instructions to prescribe it
Can you do it on a aspen
Chrysler shares lots of similar parts so it may work. Give it a try not much to lose. its just unscrewing a screw and then re-tightening it. The screwdriver is cheap. Please let us know if it worked for you.
What is the cause of this i changed my tie rods yesterday in my 300 and I definitely need an alignment but these two lights came on
Put a scan tool on this, as these codes could be anything. The scan tool will pinpoint the problem.
thanks a lot it works
I'm wondering if this process will work on a 2010 charger?
My guess is it will. The Charger and 300 are made on the same line for the most part. Please let us know if it works.
Can you tell us if it worked on a Dodge Charger as well?
Interesting 🤔,, good to know,, thank you,,
It's hard to tell - are you pulling or pushing the steering column? It looks like you're pulling toward your chest.
Yep that's right, pull it towards you....To further explain: what happened with these vehicles is it got loose over time and was moved back or away from the steering column. This is why you need to pull it towards you or closer in line with the steering column and retighten the screw so it doesn't get loose again.
Thanks!
Unbelievable. This actually worked.
Alguien que me pueda apoyar como lo hicieron me sucede en un chrysler 300 modelo 2007
Thanks for letting us know!
Does this work on a 2008 Charger
It should. Tell us if it worked for you.
Zostamax
Did it work
Thanks for the info .. 🤘🏽..💯
Thanks bro this video helps me alot tvm 😘
Jajaja gonna try it , cuz my mechanic is charging me 300 to replace it when the piece costed me 50 bucks 😂
Wow...robbery at its finest.
@FixCarYourself yesh just changed the throttle body and boom all gud , 🤣🤣 but gud video bro yu gave me confidence 🤙🏻
@FixCarYourself you think if i change the computer cuz my code says steering angle sensor not initialized? I mean got the throttle body code out but the yellow one 🙅♂️ nope
Sure will
Thank you sir!
Does this really work? My 07 charger has these damn light on...
Still works for me all these years later
@@FixCarYourself thanks I'm goin to give it a try
@@Nik3T3kk great let us know if it workes for you.
@@FixCarYourself ok will do
@@Nik3T3kk does it work? 2010 charger is doing it too, sometimes it won't even accelerate...
The reset prob cleared it not adjusting the cover ( resetting the steering angle sensor turn key on and rotate wheel full left full right then center and drive the car)
you could just reset it with a code reader scanner. But i tried it and the codes came back on pretty fast. In general turning the wheel left to right back in center, may work. In my case I had to unscrew and then tighten the screw to fix the problem.
will your car pass emissions with this stuck on
Issue is back and back what I should to do ?
If you loosened the screw a few times and pushed the cover towards you hard and then re tightened it while holding it then turned the wheel 2 times to the right and then the left and it still doesn't work after driving it for a little bit then a SAS may actually need to be replaced. Usually its becomes misaligned as a result of going over bumps over the years.
Thank's a lot buddy
Michał Michalski were you able to fix it?
Michał Michalsk
Mine has those lights on and also the abs sensor....would it be the same issue?
Most likely
didn't work for me were to go from here wen I turn my turn signals dnt turn off
I'm not sure what you mean. This shouldn't effect turn signals. Also use a code reader to verify the codes.
Thanks that fucken worked
Just performed this on my 09 Durango it works wtf I was quoted 300$ for parts and labor on new clock spring
Wow. Glad u saved money and time. Thats what its all about!
mi carro tiene lo mismo como le poedo kitar todas esa luses
My lights just came on tonight while I was driving my headlights turned out and those lights came on I turn my headlights on instead of Auto lights by the time I got to my destination turn the car off and back dash lights were out
What if it's an srt8
It should be the same as the car shares similar equipment (if not the same) with each other Please let us know
I watched your video 30 times and kept trying it and it did not work. Thanks anyways 👍🏽
Didnt work for me neither. Have u fixed it
@@Nik3T3kk it’s crazy but I had the abs light on to and when I replaced the speed sensor all my lights went off.
@@22norcal do u remember which 1
@@Nik3T3kk my front driver side speed sensor
@@22norcal ok thank I'll try n see what I come up with