Making a fluid bed for powder coating jigs

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 56

  • @digitalwoodshop
    @digitalwoodshop 3 ปีที่แล้ว

    Great Video. Comments are great too. Love the tip on the electrical tape around the lid.

  • @fredb9438
    @fredb9438 2 ปีที่แล้ว

    this video was great , tried making a fluid bed following your video and it was spot on THANK YOU !!!

  • @iwantosavemoney
    @iwantosavemoney 5 ปีที่แล้ว

    This is super cool am buying a Lee pro 4-20 later today and this is my project before it gets here thank you for sharing my friend.

  • @kalascarafiotti5311
    @kalascarafiotti5311 6 ปีที่แล้ว

    Best instructive video clear speaking and awesome detail much better than all others I watched. Great job.

  • @rickbeauchamp7339
    @rickbeauchamp7339 8 ปีที่แล้ว

    Nice..i've seen others that have a female and male adaptor but after watching this I don't think it's needed. Simple and easy...I like that you can make the one base and switch out tops..that is a great idea!! Thanks for the video

  • @rodneyprast9035
    @rodneyprast9035 6 ปีที่แล้ว +5

    Dude, did you take speech classes. It is awesome to here someone speak in complete sentences, with out a bunch of ums and uhh's. Great video and explanations. Thanks

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  6 ปีที่แล้ว

      RODNEY, ha ha ha, I’m glad you liked the video! Thanks

  • @louievjg
    @louievjg 6 ปีที่แล้ว

    Very well made video and very good camera skill I most definitely learned how to make a simple and clean looking fluid bed

  • @35rose8PBuck
    @35rose8PBuck 4 ปีที่แล้ว

    This is the best set up yet. I will be using it. Thanks great video!

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  4 ปีที่แล้ว

      It’s been working great for me for the past several years

  • @mikeswan1970
    @mikeswan1970 5 ปีที่แล้ว

    I made this and it works awesome, thanks for the informative tutorial. I wish I woulda made two now that I dug through all the parts at home blepo!

  • @ReelSouthernOutdoors
    @ReelSouthernOutdoors 6 ปีที่แล้ว

    Just found this video but just what I was looking for. A lot better than using unions , Thanks for sharing.

  • @chuckward7403
    @chuckward7403 6 ปีที่แล้ว

    Enjoyed the video. It was a very quick and easy project. Plus, it really works! Thanks.

  • @tyler496121
    @tyler496121 5 ปีที่แล้ว

    Finally someone showing how to make these without using a pvc coupler than cost $ 10 by itself.

  • @aboubakrifall2561
    @aboubakrifall2561 5 ปีที่แล้ว +1

    hello friend are you well asked a question this filter that models papers is because I have a filter problem my problems are filters

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  5 ปีที่แล้ว +1

      Hello, I’m sorry, but I do not understand what you are asking.

  • @rickbeauchamp7339
    @rickbeauchamp7339 8 ปีที่แล้ว

    Does any powder ever seep through the filter into the lower air chamber? That would be my only concern for changing out the paint top part

  • @jstorres486
    @jstorres486 9 หลายเดือนก่อน

    How easy is it to switch cups? I feel like once u push the filter and cup in it will be hard to take out

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  9 หลายเดือนก่อน

      The cups fit in fairly tight, but really aren’t that hard to remove and switch

  • @jamesmilewski9461
    @jamesmilewski9461 8 ปีที่แล้ว

    I'm new to this and need to coat small pieces, this looks to be the way for me to go, I was under the impression there had to be a positive and negative voltage used

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  8 ปีที่แล้ว

      Using a fluid bed like this does not require voltage. I think with larger items like truck frames, they use voltage to heat the metal up.

    • @nikpik6877
      @nikpik6877 8 ปีที่แล้ว +2

      Standard powder coating on large items requires electrical ions being introduced to the powder paint as it flows out of a "paint gun." The item being painted is electrically grounded and the electrically "charged" paint particles from the gun are then attracted to the grounded item. These fluid beds are used for powder coating using heat, i.e. you simply heat a lead head jig, dip it in the powder paint, and you now have an evenly paint-coated jig head.

  • @johns2453
    @johns2453 9 ปีที่แล้ว

    i made a quad.. now im tryin to find the right filter to use to get it flowin good

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  9 ปีที่แล้ว +1

      +John s A brown paper grocery bag worked the best for me.

  • @ljc_outdoors9511
    @ljc_outdoors9511 7 ปีที่แล้ว

    When I turn on the pump, the air that comes out is not very strong..... is that how it should be? Pretty light?

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  7 ปีที่แล้ว

      Ya, you don’t want it very strong or it will blow the powder. You want just enough air so when you move the cup back and forth. The powder moves like water

  • @jongkang1614
    @jongkang1614 6 ปีที่แล้ว

    I try looking for the valve you used.... Went to Home Depot and there were multiple 1/4 inch valve.....could you tell me exactly which size you used?

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  6 ปีที่แล้ว +1

      I show the package in the video. Other than that I really don’t remember. Sorry.

    • @teamfatkatzfishing6908
      @teamfatkatzfishing6908 6 ปีที่แล้ว +1

      1/4 inch compression fitting. I made mine a while back after Fishing Frenzy posted this great vid. Here is my vid as well. All props got to Fishing Frenzy. th-cam.com/video/Jm6S1gbQ0zc/w-d-xo.html

    • @teamfatkatzfishing6908
      @teamfatkatzfishing6908 6 ปีที่แล้ว +1

      3/8 inch male thread

    • @garymccraw1466
      @garymccraw1466 6 ปีที่แล้ว

      On the video he is using a LFA-41 Brass Valve. hope this helps you

  • @MrSpcdll
    @MrSpcdll ปีที่แล้ว

    Thank you sir

  • @tineschrijvers3174
    @tineschrijvers3174 6 ปีที่แล้ว

    What wattage is on the aquarium pump? I have a choice of 1.5 w or 4 w.

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  6 ปีที่แล้ว

      Tine Schrijvers I do not remember, and the pumps are at the lake right now, so I can’t look. I will tell you that it requires really minimal air, so I’m sure the small one is fine

    • @tineschrijvers3174
      @tineschrijvers3174 6 ปีที่แล้ว

      Thanks

    • @lancehenthorn17
      @lancehenthorn17 5 ปีที่แล้ว +1

      @@tineschrijvers3174 3.5W On mine. 20-60 gallon /double outlet.

  • @gtb2710
    @gtb2710 6 ปีที่แล้ว

    Great Video and Information

  • @otalldon5582
    @otalldon5582 8 ปีที่แล้ว

    Sorry I did not hear the name of the caps you use in the fluid beds. I have had a hard time finding these

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  8 ปีที่แล้ว

      At my Home Depot they have these temporary caps for the PVC. I can look on mine and get the skew and you can give that to your Home Depot.

  • @darylehayward5155
    @darylehayward5155 7 ปีที่แล้ว

    How well does Black work?

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  7 ปีที่แล้ว

      Daryle Hayward black works fine. That’s the color I use 75% of the time

  • @TalkingGIJoe
    @TalkingGIJoe 4 ปีที่แล้ว

    Nice!

  • @christaylor4161
    @christaylor4161 ปีที่แล้ว

    Why did I not know air could go through a brown paper bag 😳😳

  • @teamfatkatzfishing6908
    @teamfatkatzfishing6908 8 ปีที่แล้ว

    Great vid and I copied your product. Works great. Thanks !!!!

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  8 ปีที่แล้ว

      +Team Fat Katz Fishing No problem, Im glad that it worked for you. I was astonished how much easier it made painting jig hears...way more "factory" look too.

    • @teamfatkatzfishing6908
      @teamfatkatzfishing6908 8 ปีที่แล้ว

      No doubt they are coming out flawless. can't remember from your vid but are you baking them off to cure or not ? I have not done it yet.

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  8 ปีที่แล้ว

      +Team Fat Katz Fishing I didn't talk about it in the video, but yes I bake all of mine. It makes them way more durable. I just hand the hooks off the rack In the oven. Each color requires a different temp and time, so just google a baking chart for whatever brand of paint you are using. Another thing I do now, is find a piece of copper wire the same size as the inside of the eyelet on the hook and as soon as I pull it out off the paint I shove that wire through the eyelet to clear it out. It works perfect and leaves the eyelet super smooth.

    • @teamfatkatzfishing6908
      @teamfatkatzfishing6908 8 ปีที่แล้ว

      Thanks FishingFrenzyTV. Got it !!!!

    • @nikpik6877
      @nikpik6877 8 ปีที่แล้ว

      Have you found that it is necessary to use copper wire, or would another type of wire work just as well? I get the feeling that if I used, say, a stainless steel wire, that something undesired would happen since each guy I've seen do this with the wire uses copper.

  • @jeffstanford6187
    @jeffstanford6187 6 ปีที่แล้ว

    Simple but if you want you can take a small spoon or a touth pick and stick it in the paint and whisk it around it puts air same thing this thing is doing been pouring jigs for years, not knocking this vid good job building it buddy but for the money he spent that's a lot of money you can use for powder paint

    • @fishingfrenzytv1555
      @fishingfrenzytv1555  6 ปีที่แล้ว

      Jeff Stanford thanks for watching and thanks for the advise!

    • @lancehenthorn17
      @lancehenthorn17 5 ปีที่แล้ว +1

      This is the cheapest fluid beds I have come across. I will say from my experience of painting jigs both ways. It's well worth using a fluid bed. You save paint with a fluid bed. Just my $.02!

  • @bulldog6728
    @bulldog6728 7 ปีที่แล้ว

    Great vid and I copied your product. Works great. Thanks !!!!