Fix Windows Can't be installed on drive 0 partition error while install windows 10.
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Solve Windows Can't be installed on drive 0 partition 1 error while install Windows 10. You can fix this error without any file loss if you do correctly otherwise it could happen. How to Fix Windows Can't be installed on drive 0 partition 2 error while install Windows 10. Can't select windows installation drive : error : Windows Can't be installed on drive partition.
Still learning English, please try to understand.
What is Windows Can't Be Installed on Drive and Partition?
This error can occur when selecting an install drive after the first stage of Windows 10 installation.
Process.
If the partition you selected here is a local disk of a drive, the solution to this need to be done very careful. Other than that, if you are using a hard drive or SSD completely for Windows 10, then the solution can be done very fast, and simple.
Let me make it more clear.
Here you can see all the partition of the drive connected to the computer. If Operating system is installed on a Partition, commonly known as C drive of a Hard disk. Then the fix is only need to apply on that particular partition. And its essential to install windows 10 without damaging other partitions. For that, you need to do this procedure more carefully.
Let start procedure. use your computer keyboard and enter the Command prompt option. For that , hold the Shift key and press F10 key.
Type : Diskpart command and hit the enter key.
Type : List disk
It will shows the connected disks.
Type: Select Disk 0.
Disk 0 is now selected disk.
If you want to use the entire hard drive space for the Windows 10 operating system. From this point you can type the "clean" command and press the enter key. Then close the cmd (command prompt ) and proceed to install windows 10.
( following commands will helps you to save other partitions)
Type : List volume
it will show all system partitions.
Type: select volume ?.
Once the volume partition is selected .
Type : Clean
Type: Create Part pri
Type: Active,.
Type: format fs=NTFS label=DEE Z quick p
it takes some times to get formatted.
Type :Assign Letter=C.
Type: exit
and close the CMD.
------------------------------------------------
Now try to refresh the drive section it will allows you to select and install without any problem.
Best Free Data recovery tool : bit.ly/362xY03
There is two way to recover your important data if loss.
1, you need to have one more working desktop PC. If then, disconnect the hard drive from the loss computer and connect it to the working computer, and install a recovery tool like getdataback , Power data recovery, Recuva, Disk Drill, Pandora Recovery etc., on the computer. Then, Run the recovery tool and locate the "drive" and start recover.
2, Use another "hard drive" or any USB storage that support up to 32 GB file. And, choose that drive to install the windows operating system. After the installation log in to windows desktop. Then, install the same recovery tool on the computer, and try to recover ( no need another PC ).
you can contact me, If you can't choose the drive for windows OS installation.
How to Fix Windows Can't be installed on drive 0 partition 1 error while install Windows 10. Solve Windows Can't be installed on drive 0 partition 2 error while install Windows 10.
Deepu Prabhakar
Trivandrum, Kerala, India.
Contact : +916238290039.
Thank you so much! Worked like a charm.
Just a heads up to anyone that may be reading this, the important step here is running diskpart, and then running the clean command on the correct disk. You don't really have to do the rest in the command line.
Hope u lost all the data on a disk when executed clen command. Am i correct?
Shift f10 not working
@@saqibirfan4367 try shift+fn+f10
@@dineshkumar-nh7fq No bc This is suppose to be a clean install of windows 10? not update
@@dineshkumar-nh7fq YES BRO ....IM FUCKED
"Don't follow this method"
There is so many compliments from viewer that is this method is wipe all data, Then why you are not delting this video. Why are saying all to connect me by whatsapp, WTF r u doing buddy!
helping to recover their data, brother
I always backup all my files to the cloud, so formatting my disk is perfect, Im gonna have a clean computer with all my files saved
Im downloading this video because so many people want it taken down, I LOVE this video! Because I dont care, all my files are saved to the cloud.
bhai sahi kaha chutiya hai ..is trick ko use karke mera sara data chala gaya
@@masoodahmed7502 Right
i love this guy he actually saved me from going crazy
Same here!! 😂 thanks Dee Z!
me tooo
Me too
Jeb i love Microsoft support
Same
Its easy, just do this inside of the installer, when you are at the select disk to install Windows on part:
Click Shift + F10
Type "diskpart"
Type "list disk"
Select your disk with "select disk " + disk number
Type "clean" (It formats your drive, make sure its empty)
Type "convert gpt"
Type "exit"
Now close Command Prompt.
Click refresh
Select your drive to install on
Click "New"
Click "OK"
Select your drive then install Windows!
clean ??????????????????????????????????????????????????????????????????????????????????????????????
This help a lot men, thank you very much
I can't clean my disk 0 ):
@@DEEPUDASyoutuber what?
I followed all ur steps and it still says windows could not format a partition at disk 0
DEEZ, this is a great tutorial!!!
One point not addressed in it is that Windows 10 (and presumably Windows 11) need have the partition formatted for "GBT" instead of "MBR" which my old drive had. It was a simple command, after "Clean", insert the command "convert GPT". I am now loading Windows 10...after 2 days of trying the "Tricks" from other sources.
You made it easy to be a DIYer!!! Best wishes. Keep up the great work!!
Thanks mate 🌽
I'm glad reading this comment. I was stucked because the "insufficient disk space" at the end of copying step. The disk had been cleaned so I wonder why there is no space. Then I tried the convert GPT then then windows installation step continued to number 2 (installing windows). Thanks 👍🏻
thank you so much, i formatted my brand new nvme ssd and thought i just ruined it. your a life saver!
You are welcome!
Everyone complaining that they lost their data should not be doing these tasks. Hire someone to do it for you if you don't know what your doing! When messing with drives you can ALWAYS loose data. Ps. He literally said to clear/clean the drive and you typed it. Good luck with your computer!
Feb 2021:
You:still helping people
Everyone: :D
yeah dude no cap
AWESOME video, it worked!!! Thank you, have been fighting with this build for hours!! Thanks again.
Great to hear!
Thank you after typing clean I was able to go back and forward and install windows 10!
Excellent!
Which drive didnu select does it matter?
Hi,
I tried to format C drive and install windows 10 64 bit by watching your video. But using your commands, my disk fully got cleaned. How to recover ? All my volumes got wiped. Any help is much appreciated.
Legend. This shit was driving me crazy as install was stuck on a reboot loop! All sorted.
I followed this video steps, and my 450GB data in another partition also lost completely including my works data, and the partitions became merged into one partition.. keep in mind to backup first before doing these..
same here
Same with me
same
Kya kiya fir bhai
Mere sath bhi yahi hua
I follow everything but i lost my all data.please help me
why did you select volume 8? How did you choose this? Same for selecting which disk.
Ultimately, I just selected disk 0 and cleaned; which allowed me to re-install Windows from my boot USB
Thanks a lot for video, I deleted my primary partition by mistake. This video SOLVED my problem. Thanks again and God bless.
Thanks for telling us this will wipe the drive. I was hesitant when he said to type clean the drive, but did it anyway. Then he said to format it and I was like nope I'm not doing that and stopped. Started my pc on my old drive and went to disk management to check my new drive... all files gone. Thanks bud!
Bro, use any recovery tool to recover data ( such as MiniTool or any other ), free cracked versions available from "getintopc". Note., don't install recovery tool on the same disk that you lost data.
Same happened with me, does that mean my ssd is not working properly or it was meant to format whole drive?
after two days of struggle and i come across this!!! My man!!! i salute thee hahaahah thanks bro your tech brain is greatly appreciated
You are welcome!
I can’t get the last code to work format fs=NTFS Label=DEES quick..... what am I suppose to put instead of deez in so confused and about to throw this out the window please help I’m about to loose my mind
Don't do this you will lost whole data from your hard drive.
This works but make sure you dont care about your files anymore
Yeah he didnt said that in the video about deletion of files😑 ..now I'm fuckeddd
Do you know what clear mean? Like clear something..
@@wdkpwr6586 😑
@@wdkpwr6586 and format too
@@makkinenisoumith2591 did this fix the problem? And were u able to recover your data again?
Don't watch this video.
Your entire disk will be formatted.
I always backup all my files to the cloud, so formatting my disk is perfect, Im gonna have a clean computer with all my files saved
@@JohnMiller-qp2qb but if you backup and restore all you files later, what's the point of formatting your disk then?
sorry, I haven't read your comment before :(
I obtained a used desktop PC with a 2TB Seagate HDD via Trash Nothing, here in England, and could even boot it into its BIOS (from the HDD). Then when booting from a USB loaded with the free Microsoft Media Installation programme I could not get past "Partition 0 cannot be formatted as it is not NFTS."
After following your instructions I was able to install Windows (using my previously purchased Windows 7 key) straight after inputting the > clean command (the cleaning only took 2 seconds) as you suggested, then returning to the Set-up window, and clicking on New. The installation took a while (had to connect to the internet to complete it). Thank-you, my friend.
Man I see so many ppl who've lost their data following this tutorial, so please remove it!
Im downloading this video because so many people want it taken down, I LOVE this video! Because I dont care, all my files are saved to the cloud.
Lost all data , seriously fucked up
Same here i thought it's just drive C format
@@chetansolanki5493 there is no other idea other than tkaing out your laptop drive and read it from other computer or make new bootable from rufus and select gpt and uefi
Fucked up, I lost all the data. Ohh God! I don't know why I didn't go to the comments section
Thanks dude for it my laptop was left stranded for over a week after which I created a bootable USB drive but was getting this error when installing and this helped me a lot 😊
Great to hear!
It's very IMPORTANT that people should backup their data on separate drives before they could take this action.
Most people don't have the idea of backing up their data before taking this action
You saved my life buddy! I was ready to pull my hair out discovering I couldn't re-install windows.
Unfortunately, this didn't work for me. I've followed everything as directed, this cleared my entire 1 TB HDD instead of just the chosen partition. Lost all the rest of the drives and files.
use diskpart again, then force close cmd after successfully use "clean" command. after that use "Refresh", click next to continue installation. If it doesn't work , you may try to recreate bootable USB in MBR instead of GPT, and change boot option from UEFI to legacy in bios settings.
Wow same happened to me..lost my entire data
Same here lost all my data.. 😭
thats the point.. you have to delete your data... there's literally a command called clean dude. not gonna lie thats on you
@@karanjoshi2783 Man this is misleading. Lost my whole data from my 500 GB Hard!
You should have to give us a warning that you will lose your file
normal, if you format the partition... this are the basics. You have to know which partitions contain what and how much important the data is.
@@a64dx86 You don't realize you're formatting the drive until its too late if you are following along with his steps.
I tried to format and install in selected partition only. I follow video stepwise for this but at last my all partitions are deleted even i give clean command to the selected volume only. I lose all my data. At last there is a single partition remain with all disk formatted. Do not try it if u want ur data which r in other partion.
Bro! You’re king!
And thanks for actually explaining in English instead of just click baiting with English title.
Followed the exact steps.. Ended up loosing entire data without being able to backup. And the best part is it still shows 'Windows can't be installed on drive 0'
Varun , If you have not yet resolved ..contact me
@@DEEPUDASyoutuber can you please help me recovering my data. Without any alerts or notification it wiped the entire hard drive. Even after selecting particular volume partition.
did you install windows ?
@@DEEPUDASyoutuber Yes, But not by the same process.
Please help bro... How do I recover my data?
Bro thank you so much, this helped me setting up my computer and I couldn’t be more happy
Clean command will clean the ENTIRE disk which is selected. It will NOT only clean/wipe a single partition
I thought he'd cleaned specific volume only, not touching all the rest volumes on this disk, hadn't he?
Yes. Boy, do I feel like an idiot.
Yass 😢 my hard also full formated
I followed him step by step but lost the other partition data too, i got very old pictures, fully regretted, please be careful to watch such tutorials
IT ACTUALLY WORKED!!! Thank you, I was looking for hours!
You're welcome!
Extremely helpful and very well articulated. Thank you so much for your help, you have saved me so much stress and anxiety!
When you apply the command " clean" it will delete the entire drive. In this video, when he cleaned the volume (8), it deleted the whole (removable) drive. So all the files will be lost. If lost, you have to remove the drive and recover the lost contents with a recovery software in another working computer.
that's what happened to me, I wanna kill myself now..
Lmao I had little backup of other partition..This guy cleaned my whole drive
Same happened with me, does that mean my ssd is not working properly or it was meant to format whole drive?
@@reverseeditions8384 these commands are not right ! They're meant to wipe the drive regardless
@@adityadwivedi6154 ok thanks buddy, can u help me recovering data by any free software
I had the biggest headache trying to figure this out.
Thanks man !
Mate.. This was amazing.. I've been googling for ages.. To no avail. And this was just right! Thanks. Worth a sub for that!
Thanks for the sub!
Don't follow this way. You will lost everything. I lost all data of my PC.
Then why are you Installing USB windows Setup? just UPGRADE or Custom, or If u already Formatted? and sorry.
Bro report his channel
It fixed the problem but sadly, it reformatted my drive. And i'm dead. :(
it did the same and im dead too :(
I'm dead three 😂😭
4
small price to pay for salvation
Funking dead
Hi~ I have a quick question. When you say Type a name for the drive at “format fs=NTFS label=? quick” does it mean I can type any name or it has to be same name as somewhere else?
I'd assume you've got the answer for this, correct?
I'd assume you've got the answer for this, correct?
You stopped me from raging at my $2000 pc. Your an Absolute legend
You instructions were very clear and did what I was looking to do.
thanks
I don't understand you should have said at first that full HDD or SSD will be cleaned. You didn't. If I say I lost my official data and it hampered on my education degree, what will you do? Just because of following your video. I lost everything I had.
It gives you a pop up before you confirm for doing it. It's your fault for not reading.
@@WheelinPNW The pop up it gives no one will understand that it meant for the whole hard drive. Coz look you selected a volume. So it's natural for us to think that it's meant for the selected volume.
you are trying to reinstall windows(in my case tiny10) what are you expecting??
THANK YOU BROTHER! I was having a very hard time formatting a specific laptop for another employee, you just saved my butt!!!
My Data is Lost, after your steps my harddisk has only 1 partition available and that is totally empty, what should i do now, i want to recover my data
If you have a running computer, there are several ways to recover it.
1, Create a sub booting device to boot your device on which data is lost. (I mean, you need to create a USB or an external hard drive to boot the windows for your device. For that you need to have a working device and a software called Wintogo or Wintohdd or Wintousb). This will allow you to create a device as a windows launcher media.(it's not a bootable installation media, )
When you're done, connect that media to the PC and launch the windows, you may need to set up the operating system before launching widows. Then install a recovery tool and start recovering from the lost hard drive.
2. Disconnect the Hard Drive and Recover with a Running Device.
3. Continue installing windows on the hard drive without creating any partitions (no other device required).
Once you have completed the installation, download and install a recovery tool on your USB. Then scan the hard drive ( please note ; do not install recovery software on your lost hard drive, it must be run from another drive).
Remove this tutorial. Deleted alll my dataaaa dudeeeee. How can I recover it now???
contact
@@DEEPUDASyoutuber where?? Send your Instagram id if possible?
FB
@@DEEPUDASyoutuber check your fb matee. Please check it lil fast
Same... How can i recover it now
I lost all my data man 😭😭
Now it's your duty to help us
use my whats contact , check
@@DEEPUDASyoutuber where is your number
Plz sir mera data Delete ho gya meri help kro na sir plz
Mera photography ka pura DATA THA
So far so good, very clear and saved me a ton of nerve damage to myself..... worked ! Thank you !
How can i recovery it?
This really worked and I was so worried I ruined my SSD and HD. Thank you so much, God Bless you
Welcome 👍
Hello man have you lost your data i mean local C
@@guuledhassan446 the clean command will delete all the data in the entire drive no matter if you applying it in just one partition. "IT WILL WIPE THE WHOLE DRIVE." The guy is misleading here. He should have mentioned in the description at least. Report the video.
Thank you so much! I was worried sick that I needed to buy new parts or something, but this worked a treat! You're a legend!
You're very welcome!
Don't proceed from 3:19 if you not want to format all your partitions
Mera data delete ho gya use waps kise lau
THANK YOU!!! This tutorial really helped me after I messed up with a laptop :D man earned a new subscriber
Data recovery procedure and tips.
1. Use the best recovery tools like powerdata, disk drill and getgataback.
2. Do not install recovery software on same HDD. Use a USB drive instead.
3. Check all the folders that appear in the search result. This is because lost files can be found inside in any of extension folders.
you can contact me, If you can't choose the drive for windows OS installation.
U not just destroyed my laptop u almost destroyed my life
we can retrieve bro !!! don't be afraid ..
@@DEEPUDASyoutuber how ?
Delete this video
Or make it private
Thank you man. This helped me tons. Saved me a lot of work. I was about to do a bunch of way more complicated junk. I was stuck and was about to take radical measures lol.
Great to hear!
will it be affect or clean the same partitions other volumes data ?
Thank u so much u are the best now if my pc go down i will wach ur videos.
All the best
Dont follow the instructions in this video you will loos all of your data on the computer.
Keep reporting this channel
Bro you can get my number on comment section and whatsapp me, don't lose file, i can help you to recover.
@@DEEPUDASyoutuber Your Whatsapp Number
@@DEEPUDASyoutuber Please tell what to type after label if it is C drive whole word local disk C
Im downloading this video because so many people want it taken down, I LOVE this video! Because I dont care, all my files are saved to the cloud.
Same here, i have lost all of my data
I lost my all data 😡😡
Please Report this channel
Do you want to recover your important files, i can help you.. many users have been successfully recovered their files with recovery tool. I can guide you to do the steps.. find my whatsapp number in comment section.
@@DEEPUDASyoutuber Bro It will Format my C Drive ?
Sir plz help me
If I follow the instructions in this video, is it possible to lose the d drive?
i don't lost D-drive,,my inportent file here
IF YOU USE CLEAN!!!!!, THERE ARE SOME OTHER OPTIONS THAT YOU CAN TRY BEFORE THIS METHORD. CREATE NEW "MBR" BOOTABLE USB, CHANGE UEFI TO LEGACY OR CHANGE WINDOWS BUILT VERSION.
Oh shit.. erase my file. I lost my file my photos everything follow your instruction. shit
After you have entered the clean command, go back and select custom install again. Then you can select disk 0 and press next
Through this method other drives data will remain save or lost?
I followed all steps and my whole drive got format including other partitions too, does that mean my ssd is not working properly or it was meant to format whole drive?
Thanks... was stressing till I looked this up
Thank you, I was able follow the instructions and cleared up the issue after I cleaned the partition.
After selecting the disk 0, then list volume my C drive does not come in the list and also my computer keep restarting to windows setup.
Please help buddy
Bro thankyou very very much my computer was stuck on installation and you helped me to complete it. Again thank you vere very much
Always welcome
No drivers are found during windows installation... What should we do?? I also installed drivers and saved in other drives but during installation again this error is showing
Hi there, Fantastic video and well spoken.
I am trying to do this on Windows Server 2019, through Oracle VirtualBox.
It says that I only have "disk 0". I cannot seem to get past this point. Any ideas? cheers
HELP! When I hold Shift+F10 it gives me X: \Sources> and when I type the cmd it doesn't work
it is cmd (command prompt tool ),. "X:\source" displays when it open in bootmode
is this the reason why my pc goes back to stage 1 and reboots and repeats ? for some reason the partion drive woudlnt let me delete while trying to install windows. i’m going too try this today
When I am running the list volume command, it is not showing my C drive partition. What can I do next?
Extremely Helpful, Thank you for the video! I will keep you updated, as this is my first time recovering windows by myself after my computer BIOS corrupted and wouldn't let me reset the pc from troubleshoot recovery mode.
Thank you for saving my life. Getting me back to work I was stressed out. Love you brother thank you
Thank you so much I’ve been trying to figure out how to do this for 6 days and your video helped fix it.thanks again
Mine saysdiskpart has encountered an error: the request could not be performed because of an i/o device error.
Love me a video that is straight to the point. Following these lines of commands makes me feel like i'm actually doing something smart and not following a TH-cam guide haha.
I have run the command disk 0 then clean, so i had a problem no: no bootable device Can u help me plz
Hey bro my computer crashed and I tried to reinstall windows on the internal ssd that I originally built with my computer. If I already installed windows what command can I use to hard reset my drive?
Please don't try this process guys, otherwise you'll lose your data from another drive also.
This is BS. He selects Volume 8, and 8 is shown as "Removable". This means he is doing all that to a removable drive, and with a formatted size at 14GB, I would say it is a 16GB USB flash drive.
What a load of crap.
I did exactly all the steps for one particular partition and i got all my disk erased and that error is still present
Thank you so much! You saved me a lot of money from needing to bring it to the computer shop!
Thank you so much. This worked when I was trying to boot my laptop from a usb.
You are welcome!
It's not working. pleaseee help... I formatted it before. And i also deleted the small partitions, means I deleted the MB partitions. Please help...
I know im pretty late, but I am glad I found this video. I had been struggling with an entire corrupt computer, and I could get past the partition part when reinstalling windows. I am SO HAPPY I found this video. I know have my laptop back, and its reinstalling windows as I speak.
Does it matter which disk i select i only have 4 options volume 0 c system,volume 1 f hdd,volume 2 e recovery,volume 3 esd-usb
Bro everything works fine but i stuck at format it says the arguments specified for this command are not valid
You're lifesaver. Thanks man
I'll accidentally boot my cousin pc and then I'll have same partition problem. I check most blogs and videos and many time download flash drive and iso file again n again' ..thanks luv u man
Thank you it worked perfectly! Good tutorial, short and effective, thanks for your work :)
Best regards
windows cannot be installed to disk disk.The disk may fail soon.if other harddisk are available,install windows to other location.
what should i do???
I am really pleased to say this worked. The problem was driving me crazy. Thank you my friend.
Glad to hear it
Shall we troubleshoot the error code without loosing data??????
Sorry my friend, but is this method lose disk data?
I am getting same issue during the installation . But format the system using your process then all drive was merged and complete system formatted . So I loss the data.
Now to recover the data . Plz tell me .
Hi, my x370 fgaming motherboard installs Windows 10 99%, but it gives an error again. what is the problem? I also tested the hard drive, it is safe, I tested the Windows ssd hard drive, both fat 32, ntfs, gpt and mbr, but it gives an error again, please help me😔😔😔
Bro it failed to "create part pri" instead it says diskpart has encountered an error 🤦♂️, bro what must I do now?
bro my 2tb harddrive is "not initialized" and it says "the parameter is incorrect" how do I fix this?