Make Your Smart Home Even Smarter with Tuya / Smart Life Tips + Tricks th-cam.com/video/BVRJYZW-wkk/w-d-xo.html If you don't have a neutral wire then there are other options Smart WiFi Light Switch HACK th-cam.com/video/E93oiCDplTI/w-d-xo.html No Neutral Smart Light Switch th-cam.com/video/duSFZDRzy6E/w-d-xo.html Zigbee Touch Smart Switch th-cam.com/video/o_O5HdQo8u0/w-d-xo.html ✅ Don't Forget to Like👍 this Video, make a Comment✍and Subscribe ▶ it makes these videos possible 😊
thank you so much for this video....last year i tried to install smart switches only to find it needed a neutral supply. then I tried to link it to earth but it would trip the MCBs every time. So glad to discover this product exists.
I'll be honest, I'm not normally a fan of these glass switches as they tend to look a bit tacky, but this one is definitely one of the better ones. With no neutral and Zigbee, these should be a winner. That said, I still prefer the Aqara switches, which are very understated and the clicky factor means they have more family approval. I do agree with you on getting more switches on them than you need, as it makes for a very neat solution without needing to stick up extra buttons everywhere.
I have been looking into these and all smart switches seem to have a large control box on the reverse there is no way this will fit into a standard uk light switch back box without alterations? I have a three gang 2 way switch I’d like to make smart and there just isn’t the room in the back box with the cables too. I have smart plugs which work without the hub via Alexa echo and dot devices. Is the hub absolutely necessary?
@geekStreet Great video! thanks Question - I've seen in other videos that not having a capacitor creates lights to flicker and stuff. So how does that Zigbee gateway help to eliminate this?
I really wanna buy this switch but they are missing an important feature. They dont keep their last state when there is power failure. In my country, we have alot of power failure
I would really like this setup on my switch but when I do it the strip lights do not come on or off, not sure if I have setup the when condition is met turn on led and when turn off. The lights on the switch are all on to start off with so not sure I done them the wrong way around any further help be great on being able to use the extra switch to do other usful thing. Thanks for your video!
These switches are nice! Good review! Can it be any Zigbee hub ? Which one do you recommend for these switches ? Some have Zigbee 3.0, some don't mention it, is it all backward compatible ?
I bought a black smart switch for three lights but when I connect it, it does not work and one of the lights flickers and the others don't work. what am I doing wrong?
Good there is more no neutral, I prefer the aqara d1 personally, I've seen you review a similar clicky type although that looks bit cheaper plastic and them led would annoy me Again only personally would buy if deconz/zigbee2mqtr/zha are able to support with third party hubs
Hey, i find your videos very informative. Please could you guide on where i can find no neutral smart DIMMER switch (google compatible). The smart switches with no neutral are really impossible to find with the dimmer function? Thanks
Good stuff. Watched this video several times. Bought myself some touch smart switches recently and swapped out a 2 gang tradition switch (one of the gang to power up the ceiling fan and the other for the lights fixed to the fan) with a 3 gang touch smart switch. The fan speed and the lights can be controlled by the fan remote controller as well. Now the new switch works with Google assistant voice control. Great! Just one thing, though. I hear a purr (sound) when I touch the gang that is not connected to any device. Why is that? Any ideas? Thanks.
Hi @Geek Street - Great vid, Can you use the Smart Switch to turn off or on another Smart Switch? I have a Light switch upstairs but cannot turn off downstairs light. If I installed two touch smart switch's could one control the other?
Hello I have a couple of questions. Will these work with IKEA Tradfri lights? I have a 2 gang switch (2 sets of cables). How would I wire those with this? Do I put both the live wires in L and both the switched live in L1 or one in L1 and another in L2?
How do you get the different backgrounds in the switch control panel? I have looked and can’t see an option to change it. Is it something that’s not on iOS? Great video.
Hey geek street. I installed a 1 gang switch successfully boots going to install a 2 gang. I have four wires for two sets of lights (in my switch all wires are the same brown colour). Do I put both commons together, or will the switch get power from just the one common to power the two lights (only three inputs on the smart switch itself. Many thanks!
Hi thank you for the video. I've bought 2 smart switches just like yours (3 gang). Question on top of the switches I found a paper. If I remove the white papers do I have more light on the bottom of each switch. Thank you
Thanks for the vid. I've got no neutral wiring in my house, I'd like to replace these switches, but currently Ive got 3 switches in intermediate settings. What's the best solution for this? Can you please advise? Thanks
@@GeekStreet Thanks for this. I clicked on the amazon link below and it took me yagusmart instead of zemismart. So I then posted a question if L2 and L3 switches will get powered if I just wired L1, someone replied saying that L2 andL3 won't work if I do that. Can you please confirm if they're actually the same switch just different branding? and that it should work with your method here? I'd like to confirm before buying as they come all the way from China. Cheers
Hi, Great presentation I have ordered about 15 switches to convert my house switches, just one question does it work with my Samsung smart thing hub? Please advise. Keep up the review you doing a fantastic job. Thanks very much
@@sureshsukumaran6761 So you purchased a new Tuya HUB? Did you try looking for a device handler to integrate it in ST? I really do not want to get a new HUB and moreover wanted all my devices in one place.
@@lanio08 Please recommend the best device handler for me I have a zigbee ethernet connected hub the WIFI was not good enough I also have broad links hub connecting all the remote control. Thanks for for your reply.
Hi Geek, I have installed about ten of these switches, I did buy a WiFi Zigbee hub, in the end, my Smart thing hub do not work with the switch. So happy with the switch and thanks once again to Geek , one question can I use this switch for two way lighting? please advise
Thanks for getting back to me about that! They are pretty cool I love them. I've done a video about 2 way lighting with smart switches take a look: th-cam.com/video/W2pcYp2pPWA/w-d-xo.html
Yes thats possible using smart scenes, I've shown the concept in this video th-cam.com/video/W2pcYp2pPWA/w-d-xo.html But thinking about it you may need to change some of the wiring as it may be redundant.
zibee does do dimmer switches, search amazon for ...iolloi Zigbee 3.0 LED-Dimmer-Switch 5-250 W, trailing edge dimmer and remote control for dimmable LED and halogen lamps, compatible with Alexa and Philips Hue
No they do power off the lights, but i use the switch with smart lights because you get additional functionality off the smart lights light rbg and dimming.
@@GeekStreet so that means you still have to power the switch on first either physically or remotely to be able to control the smart lights. I am weighing between using a SLISAON switch or smart switch.
It would be a good idea to get one with more buttons on than the number of switches that you need, BUT this doesn't work well. I did that with mine and it causes the lights to flicker. I checked the instructions and it says "Please install the corresponding number of lights according to the switch button, otherwise the light will flash" So unfortunately not good advice. I now have two of these that are limited use.
I'm supprised you're having this issue as I've not had any problems and I'm using in 2 rooms, but to note I using in conjunction with a smart bulb in one room and smart gu10's in the other room.
Just an update I've put this in but smart life app does not see any of my other WiFi plugs. I have meross and kasa tplink. I can't find any way to get the smart life app to see these devices. So I cannot use the spare switches at all.
I have a wifi light switch from another brand that doesn't require a separate hub, it connects to my NOVA mesh on the guest network (2.4Ghz). Will this switch be able to connect the same way or does it 100% need the separate hub to connect to my network etc?
Can someone enlighten me? I want to buy zemismart downlights? Do I need to get zigbee hub? Is there anyway without hub r gateway the downlights functions?
Hi is it possible to use the switch through WiFi to switch another smart device on / off that’s not on the smart life or TuyaSmart app for example my sonoff light switches running on the eWeLink app? Look forward to your reply.
Iv finally got it to turn my sonoff light switches on and off but there’s a delay of sometimes up to 2 minutes either way. Is there anything u can suggest I try please ?
@@GeekStreet thanks you doing a grate job On my smart thing hub it shows it work with zigbee I will have a go cheers buddy,for the prompt reply. I will get a zigbee hub as well. Since your review was good I went on bought 15 switch all three gang. Keep up the good work 👍
Hi there yes the switch picked up by the SmartThings hub but can’t perform any function, just it’s connected.I have ordered a WiFi Zigbee gateway should arrive tomorrow keep you updated. Normal UK house back box does not foot the switch I need to change all back box with a deeper one about 25 mm deep.
@@GeekStreet it is possible for more range, that statement might get someone to buy a hub and 1 zigbee device and put them a mile apart scratching there head :D
To clarify - does a zigbee hub reach further to a device than a wifi router would? Or is the extra distance dependant on a daisy chain of devices? I'm trying to workout if an echo plus - which I believe to be a zigbee hub - will talk to a switch in our detached prefab garage some 10 metres away as the crow flies but with one inside house wall plus one outer house wall and one prefab concrete wall, in between. Our router, which is across the room from Alexa, but further away from the garage, will talk to a tablet next to the proposed light switch location. I'm unclear if a zigbee switch will need another zigbee device closer to Alexa to repeat with? In other words, if the wifi signal gets there, does that suggest a zigbee signal should def get there over the same distance from its relative hub? Cheers
Make Your Smart Home Even Smarter with Tuya / Smart Life Tips + Tricks
th-cam.com/video/BVRJYZW-wkk/w-d-xo.html
If you don't have a neutral wire then there are other options
Smart WiFi Light Switch HACK
th-cam.com/video/E93oiCDplTI/w-d-xo.html
No Neutral Smart Light Switch
th-cam.com/video/duSFZDRzy6E/w-d-xo.html
Zigbee Touch Smart Switch
th-cam.com/video/o_O5HdQo8u0/w-d-xo.html
✅ Don't Forget to Like👍 this Video, make a Comment✍and Subscribe ▶ it makes these videos possible 😊
Did you know your smart switch is upside down. Lol
@@SpicyLemonVlog no that is the correct way up.
@@GeekStreet oh ok sorry my bad
This was a useful vid so thanks for it
Do these dim?
thank you so much for this video....last year i tried to install smart switches only to find it needed a neutral supply. then I tried to link it to earth but it would trip the MCBs every time. So glad to discover this product exists.
You only needed to rewire your switch with 3 core and earth cable or drop a natural from your light
i definitely like this smart switch. the styling looks good too
I'll be honest, I'm not normally a fan of these glass switches as they tend to look a bit tacky, but this one is definitely one of the better ones. With no neutral and Zigbee, these should be a winner. That said, I still prefer the Aqara switches, which are very understated and the clicky factor means they have more family approval. I do agree with you on getting more switches on them than you need, as it makes for a very neat solution without needing to stick up extra buttons everywhere.
Great video, good in depth presentation as off all your video's. The blind control is very impressive, you have a great setup there.
will if link to philips hue bride its zigbee so why need a new port being used if i all ready have hue please let me know ;-)
Impressive light switch, might have to get me some of these for my house. Thanks for the awesome review 👏🏻
Thanks bro much appreciated. I've been using for month or so and really like it.
There are WiFi switches on the market that don't require a neutral wire, and are part of the Tuya Smart Life system
Great vid, thanks! Can I use the 3 separate buttons to add routines in Google Assistent? So this way I can change a scene and control my Hue lights?
man those switches are really cool! great equipment!
Great video!
Will it work with smartthings hub?
I want to know that too haha
Thanks for the nice video and I wish you a good week !!! 🔝🥰🔝🥰🔝
Thank you! You too!
This video is very informative my friend. Thank you for this tutorial
I have been looking into these and all smart switches seem to have a large control box on the reverse there is no way this will fit into a standard uk light switch back box without alterations? I have a three gang 2 way switch I’d like to make smart and there just isn’t the room in the back box with the cables too. I have smart plugs which work without the hub via Alexa echo and dot devices. Is the hub absolutely necessary?
@geekStreet Great video! thanks
Question - I've seen in other videos that not having a capacitor creates lights to flicker and stuff. So how does that Zigbee gateway help to eliminate this?
Same question please
I really wanna buy this switch but they are missing an important feature. They dont keep their last state when there is power failure. In my country, we have alot of power failure
Great video👍
I would really like this setup on my switch but when I do it the strip lights do not come on or off, not sure if I have setup the when condition is met turn on led and when turn off. The lights on the switch are all on to start off with so not sure I done them the wrong way around any further help be great on being able to use the extra switch to do other usful thing. Thanks for your video!
Nice video ma man keep up the great work. Is that a zemismart zigbee blind engine you using or is it wifi version
Thanks thats the wifi version.
Cheers for that ma man 👊🏾
@@craigsamuels7895 you're welcome!
These switches are nice! Good review! Can it be any Zigbee hub ? Which one do you recommend for these switches ? Some have Zigbee 3.0, some don't mention it, is it all backward compatible ?
And are they 3 way switches and if the internet is down will the 3 way function still work?
I bought a black smart switch for three lights but when I connect it, it does not work and one of the lights flickers and the others don't work. what am I doing wrong?
Good there is more no neutral, I prefer the aqara d1 personally, I've seen you review a similar clicky type although that looks bit cheaper plastic and them led would annoy me
Again only personally would buy if deconz/zigbee2mqtr/zha are able to support with third party hubs
nice video~bro
Hey, i find your videos very informative.
Please could you guide on where i can find no neutral smart DIMMER switch (google compatible).
The smart switches with no neutral are really impossible to find with the dimmer function?
Thanks
Hi,
Which RF controller you have used for your blind?
Do they have this in black , if so can you please send a link
I have earth cable that is screwed onto the switchplate, what do I do with earth cable when installing smart switch?
Good stuff. Watched this video several times. Bought myself some touch smart switches recently and swapped out a 2 gang tradition switch (one of the gang to power up the ceiling fan and the other for the lights fixed to the fan) with a 3 gang touch smart switch. The fan speed and the lights can be controlled by the fan remote controller as well. Now the new switch works with Google assistant voice control. Great! Just one thing, though. I hear a purr (sound) when I touch the gang that is not connected to any device. Why is that? Any ideas? Thanks.
Hi @Geek Street - Great vid, Can you use the Smart Switch to turn off or on another Smart Switch?
I have a Light switch upstairs but cannot turn off downstairs light.
If I installed two touch smart switch's could one control the other?
Yes thats possible using smart scenes, I've shown the concept in this video
th-cam.com/video/W2pcYp2pPWA/w-d-xo.html
Hello
New friends
Nice to meet you guys
🔔🔔🔔🔔🔔🔔
That switch won't fit in a standard UK back box, it looks like it needs a 35mm deep box. Looks good though. Nice review!
It's the same for most smart switches. The nearest I've been able to get to fitting in the standard box is the Aqara, and even that needs a spacer.
Will a hue bridge work?
This could just be the video I've been looking for to set up two double light switches that control the two set of kitchen lights.
Hello I have a couple of questions.
Will these work with IKEA Tradfri lights?
I have a 2 gang switch (2 sets of cables). How would I wire those with this?
Do I put both the live wires in L and both the switched live in L1 or one in L1 and another in L2?
Can this switch be used to control smart lights as well?
Does this work with IFTTT and Samsung smartthings?
How do you get the different backgrounds in the switch control panel? I have looked and can’t see an option to change it. Is it something that’s not on iOS?
Great video.
I also wanna change the on and off colors if thats possible?
Hey geek street. I installed a 1 gang switch successfully boots going to install a 2 gang. I have four wires for two sets of lights (in my switch all wires are the same brown colour). Do I put both commons together, or will the switch get power from just the one common to power the two lights (only three inputs on the smart switch itself. Many thanks!
Cheers very comprehensive. Are they dimmable thats what Im after, I dont have Alexa btw, thanks.
No unfortunately this isn't dimmable.
Smart Wifi Switches comes with no N-wire also
Yes they normally require a capacitor to be installed in the circuit.
Hi thank you for the video. I've bought 2 smart switches just like yours (3 gang). Question on top of the switches I found a paper. If I remove the white papers do I have more light on the bottom of each switch. Thank you
I'm not sure not come across that.
I'm not sure if I have a neutral wire or not. I have a brown wire a blue wire and a yellow/green wire. Is one of those a neutral?
I'm assuming you haven't from what you have mentioned, to be on the safe side best to ask an electrician.
Thanks!
Pretty sure blue is neutral, brown is live, yellow green is earth
hello dear,will it work with smartthings hub?
Amazing 👍
That's a really cool switch. Can you dim the lights say with amazon alexia?
No you'd have to do something like this
th-cam.com/video/XPPvphiLmCI/w-d-xo.html
How come you don't need a capacitor for this switch?
It works differently, you'll need a zigbee hub to use this.
th-cam.com/video/5xXorxPrRuI/w-d-xo.html
Hey would you know ir they work with Alexa hub?
Thanks for the vid. I've got no neutral wiring in my house, I'd like to replace these switches, but currently Ive got 3 switches in intermediate settings. What's the best solution for this? Can you please advise? Thanks
This is the best list switch with no neutral. For intermediate lights check out this video:
th-cam.com/video/W2pcYp2pPWA/w-d-xo.html
@@GeekStreet Thanks for this. I clicked on the amazon link below and it took me yagusmart instead of zemismart. So I then posted a question if L2 and L3 switches will get powered if I just wired L1, someone replied saying that L2 andL3 won't work if I do that. Can you please confirm if they're actually the same switch just different branding? and that it should work with your method here? I'd like to confirm before buying as they come all the way from China. Cheers
@@th0r777 yes its the same brand.
@@GeekStreet thank you muchly!
Just above a Shelly above the fitting instead of in the switch pannel
Excellent
Thanks!
I bought the switch that same as you. Everything worked fine but my switch not having red status when I turn off, only blue status when I turn on.
I wonder if they have changed the functionality?
are you required to use L1 terminal? I'd quite like to use the middle button (L2) for ceiling lights
Its fine to use either.
Nice video my friend
Thank you 👍
Can I get this in black
Most led lights are dimmable, will this function be lost
Hi, Great presentation I have ordered about 15 switches to convert my house switches, just one question does it work with my Samsung smart thing hub? Please advise. Keep up the review you doing a fantastic job. Thanks very much
Thanks for the comment, in theory yes it should work as its Zigbee based. Let me know how you get on as it will help other people thinking of buying.
Hi Suresh, were you able to get the switch to work with Smartthings? Many thanks in advance.
@@lanio08 No it did not work I have linked with zigbee hub then to alexa via smart life
@@sureshsukumaran6761 So you purchased a new Tuya HUB? Did you try looking for a device handler to integrate it in ST? I really do not want to get a new HUB and moreover wanted all my devices in one place.
@@lanio08 Please recommend the best device handler for me I have a zigbee ethernet connected hub the WIFI was not good enough I also have broad links hub connecting all the remote control. Thanks for for your reply.
Great vid. - Am I right in saying echo plus has zigbee gateway, so no extra gateway purchase necessary?
Thanks, in theory yes it should work, but ive not tested.
will it work with smartthings hub as it is also sigbee
Great video. Quick question Is it Zigbee? or WIFI? Can I use a different HUB? Non-Tuya?
Thanks its a Zigbee product. I'm not 100% sure it will work with other hubs.
Hi Geek, I have installed about ten of these switches, I did buy a WiFi Zigbee hub, in the end, my Smart thing hub do not work with the switch. So happy with the switch and thanks once again to Geek , one question can I use this switch for two way lighting? please advise
Thanks for getting back to me about that! They are pretty cool I love them. I've done a video about 2 way lighting with smart switches take a look:
th-cam.com/video/W2pcYp2pPWA/w-d-xo.html
Hi, will it work with the Philips Hue Zigbee Hub ?
Or we need to take an other bridge ?
I've tried adding on the Philips hue hub a while back and it didn't work
Will this work with sonoff zigbee hub?
Can you use these to dim the bulb?
Yes this is how to do it.
th-cam.com/video/XPPvphiLmCI/w-d-xo.html
Hi Geek Street does is there a switch for air conditioning thank you.
You could link via smart scenes so the air con could use a smart plug to turn on.
@@GeekStreet Thank you.
Can this light switch be used with a second as a 2way switch ie top and bottom of the stairs to control one light
Yes thats possible using smart scenes, I've shown the concept in this video
th-cam.com/video/W2pcYp2pPWA/w-d-xo.html
But thinking about it you may need to change some of the wiring as it may be redundant.
Genius!
I have a Philips hue bridge, would this work?
I have tested but it didn't work.
Hi, can it be configured without ZigBee Gateway, direct with WiFi router?
No
Awesome video! Can these switches dim the lights?
Thanks, no unfortunately not.
zibee does do dimmer switches, search amazon for ...iolloi Zigbee 3.0 LED-Dimmer-Switch 5-250 W, trailing edge dimmer and remote control for dimmable LED and halogen lamps, compatible with Alexa and Philips Hue
ALSO, does it have to be a zigbee gateway or can it be any, for example, samsung smarthings hub, xiaomi hub, etc
It should in theory work with other zigbee hubs like the ones you mentioned.
Will of this work without "Internet Connection"?? The wifi is still Running but No Internet Connection...?? Will this still work??
Yes but if you've setup any smart automation that won't work.
there were no details in the video how the gateway / hub is set up?
Check this out
th-cam.com/video/5xXorxPrRuI/w-d-xo.html
Is there a 120 volt version?
Not sure check out the links in the description more details there.
Does the switch work with smart lights? If the switches is in the off state, can the smart light still be controlled directly?
No they do power off the lights, but i use the switch with smart lights because you get additional functionality off the smart lights light rbg and dimming.
@@GeekStreet so that means you still have to power the switch on first either physically or remotely to be able to control the smart lights. I am weighing between using a SLISAON switch or smart switch.
It would be a good idea to get one with more buttons on than the number of switches that you need, BUT this doesn't work well. I did that with mine and it causes the lights to flicker. I checked the instructions and it says "Please install the corresponding number of lights according to the switch button, otherwise the light will flash" So unfortunately not good advice. I now have two of these that are limited use.
I'm supprised you're having this issue as I've not had any problems and I'm using in 2 rooms, but to note I using in conjunction with a smart bulb in one room and smart gu10's in the other room.
oh does this switch work as a zigbee extender ?
No
Hi, can you control other WiFi smart plugs with the spare buttons or does it have to be zigbee devices?
Should work on either via scenes in smart life.
Just an update I've put this in but smart life app does not see any of my other WiFi plugs. I have meross and kasa tplink. I can't find any way to get the smart life app to see these devices. So I cannot use the spare switches at all.
@@paulrobinson6860 oh if you have other brands you would have to use IFTTT.
I have a wifi light switch from another brand that doesn't require a separate hub, it connects to my NOVA mesh on the guest network (2.4Ghz). Will this switch be able to connect the same way or does it 100% need the separate hub to connect to my network etc?
100% this one needs a hub.
@@GeekStreet Thanks for replying so quickly. How does the hub connect to my mesh/wifi?
@@richardcook9828 using ethernet, take a look at this video all is shown in that
th-cam.com/video/5xXorxPrRuI/w-d-xo.html
Are these available in 2 way for Hallways?
No, but you could do using this method
th-cam.com/video/W2pcYp2pPWA/w-d-xo.html
@@GeekStreet great use of scenes! Thank you!
What to do with the ground wire attached to the switch?
Which country are you in? as there isn't normally an earth wire on the switch.
@@GeekStreet I guess just here in Israel
Can someone enlighten me? I want to buy zemismart downlights? Do I need to get zigbee hub? Is there anyway without hub r gateway the downlights functions?
If they are zigbee products you will need a hub
Do these switches have dimming capability?
No
Mga idol magtulongan nlang tyo pwede god bless......,.,
U could just turn it the other way round..
They printed it wrong 😂😂
Hi is it possible to use the switch through WiFi to switch another smart device on / off that’s not on the smart life or TuyaSmart app for example my sonoff light switches running on the eWeLink app? Look forward to your reply.
Yes, you would use IFTTT app to do that
@@GeekStreet thanks for the reply I will download IFTTT and give it a go 👍
No problem, let me know how you get on.
Iv finally got it to turn my sonoff light switches on and off but there’s a delay of sometimes up to 2 minutes either way. Is there anything u can suggest I try please ?
Hiy my now friend l hope more bist
for you Iam waitig you 💞💞💞👍
Hello Geek Street, I have bought this switch, does it work with smart thing hub? do I need Zigbee hub? I already have a smart thing hub please advice.
You need a Zigbee hub for this to work, in theory it should work with smart things hub but I'm not 100% sure.
@@GeekStreet thanks you doing a grate job
On my smart thing hub it shows it work with zigbee I will have a go cheers buddy,for the prompt reply. I will get a zigbee hub as well. Since your review was good I went on bought 15 switch all three gang.
Keep up the good work 👍
@@sureshsukumaran6761 thanks for the comment good to hear my videos help.
Hi there yes the switch picked up by the SmartThings hub but can’t perform any function, just it’s connected.I have ordered a WiFi Zigbee gateway should arrive tomorrow keep you updated.
Normal UK house back box does not foot the switch I need to change all back box with a deeper one about 25 mm deep.
Wah ini.
must need capacitor?
No just the zigbee gateway.
What else can you do with a zigbee gateway?
You can add in other Zigbee devices like PIR sensors, Door Sensors etc. The Advantage is the range is longer than WiFi.
@@GeekStreet it is possible for more range, that statement might get someone to buy a hub and 1 zigbee device and put them a mile apart scratching there head :D
To clarify - does a zigbee hub reach further to a device than a wifi router would? Or is the extra distance dependant on a daisy chain of devices?
I'm trying to workout if an echo plus - which I believe to be a zigbee hub - will talk to a switch in our detached prefab garage some 10 metres away as the crow flies but with one inside house wall plus one outer house wall and one prefab concrete wall, in between.
Our router, which is across the room from Alexa, but further away from the garage, will talk to a tablet next to the proposed light switch location.
I'm unclear if a zigbee switch will need another zigbee device closer to Alexa to repeat with?
In other words, if the wifi signal gets there, does that suggest a zigbee signal should def get there over the same distance from its relative hub?
Cheers
Zigbee range is further than wifi but the more things than are in the way like walls etc then this will impact the range.
No capacitor?
Correct
But you need a hub.
Jealous, I have four brown wires, one silver & black with brown sleeves. And can’t find how to connect outside 🤦♂️
Which country are you in?
UK
Obviously dude u must have installed it upside down like u install the smart socket or r u smoking 😂😂😂
Even a blind could see it's inverted 😂😂
A bit confusing what u r saying.. So u just connect 1 wire to load but can control multiple devices with wifi? How do u do that 😂😂
You haven't watched the video...🙃
I think it's upside down 😂
Nope thats the right way round.
@@GeekStreet u must be funny dude 😂😂
Comment section
I’m the only one here