Building a Two-Stroke Race Replica Aprilia RS 125 Old Body New Chassis Conversion
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- In this series i'll be attempting to transplant the best bits of Aprilia's 2002 model RS 125 into the frame of a 2008 two stroke RS125. In doing so i'll be upgrading most of its chassis and components to give a true Aprilia RS 125 race look from the 90's and early 2000's. This Aprilia RS 125 will be fully rebuilt and restored from the ground up so make sure you subscribe and check out my other project videos.
#apriliars125 #twostroke #motorcycleproject
I'm 15 years old and i will be buying my first bike some time next year,and it will likely be the Aprillia RS 125.I will most likely be doing a build on it so these videos are highly informative and helpful to someone that hasn't owned a bike before,keep it up!
You still building this bike ? Part 2.? 👍
Love these videos you do of the RS125 rebuilds. Iv just finished the restoration of a 1999 and these videos remind me of the challenges I faced throughout the my build. Can’t wait to see this come together. Keep up the great work!
Great video. I have just purchased a 2000 myself for a restoration project. Similar condition to yours and it has been stored for 11 years. Looking forward to seeing your progress. Thank you 👍
Phil Fisher cheers for watching Phil they’re good fun to work on
@@letsreviewit8925 I've worked on a few bikes upto now but this is my first 2 stroke. Looking forward to it. Thanks for the reply. 👍
Awesome can’t wait to see the next update on this build 🙏🏻🙏🏻
I’m going to be buying one soon looking for an 09-12 model can’t wait 😊😊😊
So chuffed to have found your channel as I'm doing pretty much the same thing. Look forward to seeing the progress!
Laurence Borg cheers for watching mate this is going to be a special build
2012
Love those rebuilds! 👍
I am the owner of RS125. I deeply respect your efforts!
Excellent choice :-) Just finished my Biaggi Replica
Part way through a 2005 rs125, spent a lot of time polishing the frame and swinging arm
Good luck with the build mate
2014
Just went through all these build videos and they're great! Where'd you go? Hope all is well.
Well done mate great one 👍
Ps what took you so long only joking 😂😂😂
Looking forward to this Ben 👍
I take my hat off to you sir, well done. Any upcoming videos?
Can't wait for the next video!
Will be about a week I expect make sure you're subscribed :)
@@letsreviewit8925 didn't know a week takes about 6months :)
Super anschaulich erklärt ich Starte auch bald ein RS 125 Extrema Projekt💪
Great video
i really enjoyed this nice content mate!
now i like to jump in my garage to build my own project!
Have a good one buddy
AeroR thanks for watching
2013
Checking this channel everyday to see if there’s any new videos of the RS125 up I’ve already watched every Rs video on Ytube need some new ones ASAP😂💯
They’re coming matey stick around
@@letsreviewit8925 I will be can’t wait for the new video last build you did turned out perfect can’t wait to get mine finished
A good combination is a old shape front end plastics with a new shape tail and tank.
Happy Birthday!
Using a torque wrench as a breaker bar made me wince.
Great video 👌
If you're ever considering picking up a new project bike, then I think you should do a cagiva mito one.
Great video mate
Nice one looking forward to the updates. Forged or carbon wheels?
Essex Hognose no too expensive haha
2015
.
Well done
Hi, thanks for sharing your journey, Can you tell the website on which you get all these furniture? Thanks keep going
Hi Antoine they come from all different sites, which parts are you specifically referring to?
2016
Any further progress? Keen to see what's happening
Maximum pleasure Guaranteed
Did you buy the Blue one from Peterborough by any chance?
Im loving my RS, fitted a 140cc kit and 34mm carb and just this morning a new clutch as the old one was beggining to slip a touch. I never saw myself as a bike mechanic :)
As far as i know, the latter model CDI's are different, from the clocks the Blue one is a Euro 3 bike. This means its the most restricted RS they did, 2 cats in the Expansion Chamber and to derestrict it if it isnt it needs drilling in the small recess at the top left if i remember right.
I use a 50p coin for the clutch caps :)
boneav83 it did come from Peterborough yes 👌🏻
@@letsreviewit8925 It was just 2 minutes down the road from me, i saw it on Ebay a while ago and was so close to buying it. Im glad its gone to a good home :)
Actually both seem quite restorable to me. The blue one seems to be a talmacsi replica. So restore both :-)
Rad u pulled off is alloy.. one of those double depth race rads you want
Must say I'm loving the vids
2017
How is it coming along?
New sub here,great to watch👍👍
Great video, where did you get the race rear end fairing from?
Jordan shaw comes from a composite company in Italy text this guy Bert +39 349 871 6114 he’s really good and did it in 2 weeks
Are they expensive, with shipping etc?
£110 I think mate
We want the part 2!
Hiya Is there a part two on this build ?
Love theses vids, can I ask, do you have your personal 125?
I'm working on the next one now one day i'll keep one lol
@@letsreviewit8925 very lovely bike, I hope so 👍🏿👍🏿
Are you still building this bike? Havent seen any updates!
when is your second rs 125 project expected to start?
Whats the progress? Been afew months! Ive got a 2001 which I'm restoring, nut and bolt rebuild!
The new rim look nice. What rim is that
Where do you send the engine to i am looking for someone to do a 123 rotax
Where have the new uploads Gone? Has he quit?
Where’s this guy gone ?
Where are you guys? You haven’t released a video in ages?
Where'd you go ?
We're back!
Where you gone
Any new updates on this project??
Any updates?
Part 2. ?
What company are you sending your engine off to?
I know an ex GP rider who is a 2T nut
2018
Doing the same, restoring a a basket case...only it’s a 2009 yzf 125 that spent 11 years at the seaside so has been eaten alive by the salt.
Mark D salt is a nightmare on fixings mate
The state of the clip ons, chain and shock were horrific.
The RSV1000R I did was from Cornwall it had rust in places that weren’t metal haha
so is the other bike a rotax 123?? i have hears they don’t fit in newer frames but don’t know for sure.
there are subtle differences with older and new frames and parts are harder to get for older models
who is building your engine ?
They're both 122's so there are no issues there, a good friend of mine is building the engine he's an ex 2T GP rider and old fart to boot but he knows smokers.
Lets Review It corsa black is paint code 95-98 then changed to diablo black R and S motorcycle paints have it
Whats corsa black? I’m confused?
Lets Review It the name of the colour for “chesterfield “black aprilia rs125, took me an age to find that out, so thought i’d share it with you.
Ah sorry got ya thank you, I was just getting a painter to colour match to be honest
2019
update ?? :)
What happened to the build?
Back up and running!
@@letsreviewit8925 Need an update video 👍
hi there bro! nice rebuild. but i just want to know where u purchase all the accessories especially the single seat? Im very interested! and hi from singapore! 🇸🇬 i own one too do check up my video
Aaafiiqqq they come from various suppliers, the seat came from Holland actually I’ll dig out their contact details
Seat came from Italy sorry text this guy Bert he makes them and they’re good quality +39 349 871 6114
You buy bike lift....
Part 2 ?
Is online now