Omg i wasn't able to find solution for this problem for 2 months in this lockdown....today you finally provided me with 100% Working solution, thank you so so much can't express how happy i am right now...thanks again
When done with command prompt , i clicked on "Start windows with last known good configuration" and it worked like a charm. Thanks for a good video m8 :)
Tks a lot I just spent 60$ at my Pc repair shop--and they could not fixe my problem and with your instructions I fix it in 5 min Tks again Very clear instructions
Thank you so much for uploading this video because it helped me solve my problem with my computer. Windows 7 on my computer wasn't booting properly then it tells me to boot from startup repair. Thanks alot because it helps.
Thank you so much for this excellent tutorial! I have a brand new HP Elitebook 850 G1 with Windows 8.1. Due to an incompatibility issue I got "Error: 0xc0000225" and this rebuild bcd trick worked. Luckily I had made a recovery flash drive on a memory stick. By inserting it, turning on the notebook, and tapping on f9 the LED of the stick flashed for about 2 minutes. Then I could get to the command prompt via Troubleshoot > Advanced options. All I did was right away type in:bootrec /rebuildbcd After that I typed in: exit Then clicked on the top right corner X so the command prompt closed. Now I was back on the light blue screen with and chose the Shut down computer option. To my very glad surprise my familiar desktop screen appeared in a few seconds! Cool! Because I had followed some other tutorials but none worked for me. I'll post a link to this video on the HP forum in a thread I called: "Error code 0xc0000225."
Great! It works and fixed my PC win 7, 64bit. I had try many ways to start the windows.,but it can't success. When I follow this video on the second step, open the "Command Prompt" than key in [ bootrec /fixmbr ]. Finally, I can started my windows again. Thanks for sharing this video.
Thank you very much. you've been alot of help. I followed this video and it worked great. don't stop on tutorials like this because there alot of help.
Thanks a lot JAG !!! A really professional way of explaining every detail step-by-step...Take your LIKE!!! Sure the dislikers either don't understand english, so you can make this video in chineese for for those.............s, or you're just too smart for them...:))
Sir, you are a lifesaver. Your video on booting Windows to USB using WinToFlash, and especially this video helped me a lot. I really thought my old laptop was a goner when it showed 'bootmgr is compressed'. I'm no IT, but following this instructions, I was able to open up my laptop again. I can't express how much I appreciate this video of yours. So THANK YOU SO MUCH!! Keep it up, sir.:)
Thanks a lot....this very helpful....I had tried all other possible source but unable start my laptop....after tried this information and my laptop is started
what does it mean reboot and select proper boot device or insert boot media in selected boot device? I have my windows 7 disc in the CDRom and priority set to CDROM as number 1.
Worth a try but didn't work for me, the Dell I am trying to repair gets as far as preparing the computer for first use but then just hangs. I can't even get it to go into safe mode. Thanks
bootrec commands both are great. Startup still didn't fix it and my system didn't come with a backup disc. I finally got an operating system to show, but forgot to highlight/choose it. It now bypasses and goes directly to Advanced Recovery Options. How can I get this "Choosing Operating System" window up again? This would help tremendously.
When I enter the fixboot command, the cmd says the following: The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. Any fix for this?
I got windows vista business 32 bit . When using bcdedit to export i get message "the system cannot find the file "... And when I try to switch to C: drive it says "The file or directory is corrupted and unreadable". Does that mean hard disk is completely dead??
Thanks sir for the tutorial, is the reinstallation dvd the same media dvd you talk about? This is the one that came with my computer, i'm running Vista. Awaiting response..Again thanks.
what do I do if the disc I used to install windows won;t allow me to get into the repair your computer screen? I keep getting the error that the disc isn't compatable with this installation, and to insert one that is
Thanks for the nice illustration, just want to ask you, my windows 7 DVD does not show the option "repair", it starts with (I think) second screen containing loading windows files, and then proceed to install new version and keep the old windows files in the folder, old windows. I do not want to go through this new installation, I just want to repair my system files, sfc scan cannot repair them, resulting in many problems, such as dinotify.exe error, jscript.dll, just in time debugging, Thanks
Thanks a lot, but what if the HDD failure and plater runs fine and head makes noise sometime, While OS 7 starting it's locked up at the logo/welcome screen!!! USB bootable flsah drive couldn't detect though every function is alright but HDD won't shows up, then removing that USB FD and restarting that HDD shows up the freeze screen, sometime couldn't detect....
Thank you very much this worked. I tried doing many other things but this worked. So i think what happened was a I accedently downloaded something with a virus and when I went to start it up this morning it was no go. Thanks very much
after startup, I get recent hardware or software change might have installed a file that is signed incorrectly of damaged, or that might be malicious software from an unknown source. try the recovery disc option. OTHERWISE press f8 for advanced boot options and select last known good. if you understand why it cannot be verified temporarily disable driver signature enforcement. >>>> HOW DO I Get to "disable driver signature enforcement" ?? So i can start up and put my product key in??
Is it possible this issue can get fixed without inserting some disk or whatever it is we would need? may sound like a stupid question but with these solutions there is nothing i can do about it when it comes to inside out of you're own PC. I'm not all that professional at computers or repairing things, i could take this to someone if i run out of option to this BS error or whatever video i go to that isn't helping. I hope you give me some better solutions please so i can hit back to my Windows 7.
I have done every thing in the video. Windows reboots and says "preparing start up". Then it loads to a black screen saying this version of windows is not genuine(build 7601). How do I fix this?
on the last step after we press enter for rebuild bcd, the system scans but doesn't find and windows installation "total identified win. installations:0" what do i do then?
Hi , tried several times. unable to rebuild BCD. given message as corrupt or unreadable BCD. also I have only one hard drive. it shows three partition. partition 1 is for recovery, partition 2 is questionable(only 100 MB -primary???), Partition 3 is the actual partition for primary. How do I delete partition 2 or what is the solution for this..Thank you
Hi, I did these on my Windows 7 (only the bootrec /mbr and fixboot) then when I started my computer it fixed the boot problem and then I just saw in my desktop on the lower right side writes "Windows 7 Build 7600 This copy of Windows is not genuine" .. What to do? Please help thank you
alright so what I decided to do is name the folder differently , instead of c:\boot\bcd bcd_backup1 , is it alright if i kind of switched the file names?
You saved me! I couldn't start my computer at all, now I can start it, & run all of the programs. However when I start up it still says "Problem starting....specified module could not be found" any suggestions?
please help me out! I did the same process as the video, but when I clicked the restartutton, then it went back to where it says "press any key to... CD and DVD"
Thanks Very Much. With the elaborate BCD rebuilding as narrated and shown by you, I was able to restore my Windows 7 Pro back into operating condition with my personal data files intact. Although my Compaq Presario V5000 has only a single partition (C:) the repair window showed as in your video d: Any reason as to what could have caused this problem out of the blues (I have a genuine win7 pro disk). Thanks again.
I really messed up my computer real bad im trying to do this but when I get to 4:03 on my computer it doesn't show anything there so I can't boot. Also im trying to figure out what my hard drive should be formatted so that I can install a new windows 7 is there a way you can help?
I finished the complete video and I got successfully scan Windows installation total identified Windows installations 0 so what do I do from this point? I have a Dell laptop and it has Windows 7 on here with Intel onside core i4... if that's any help I would greatly greatly appreciate it. I know it's been some time since you did this video but hopefully you will see this and get back to me thank you .
Hey I have a huge problem I think, my os doesnt appear when I start the system recovery options it doesnt even scan for it it just pops up the window with the restore using image button selected and I dont know how to load the drivers manually please help!
Hi I've folowed your fist command :bootrec \fixmbr) and it was ok. I've folowed the second command (bootrec \fixboot) and it said : element not found. So, I do not know what to type nex or to do next Can you help please ? Thanks
I have a toshiba laptop with windows vista that does the post boot but does not show anything, no windows logo, no startup at all just a blank screen. I tried everything on this video and still nothing. Any more tips or ideas. Thanks in advance.
hey dude i tried you're tutorial.. but it didn't show me the selection of repair windows etc. it ended to "where do you want to install windows" and there's a caution notif. the "Cannot install windows to disk 2 blach2 "the disk may fail soon" what if i format it?? co'z i only want to repair it co'z it wont bootup
hi, i did all the steps and like Scott R i got windows installations installed 0 so can you help regarding this problem?? please help if you know a way that this can be fixded... thanks
it doesnt find anything in the Cd boot step, and when i use /dir to see if there is "Boot", it doesnt appear any folder with that name. My english sucks
well if you can get on command promt with the boot cd, you should try scanning your hard drive, type "chkdsk" without quotes other than that just rebuild the bootmanager orr reinstall windows and yes i know you would lose all data likethat but only way honestly
Omg i wasn't able to find solution for this problem for 2 months in this lockdown....today you finally provided me with 100% Working solution, thank you so so much can't express how happy i am right now...thanks again
When done with command prompt , i clicked on "Start windows with last known good configuration" and it worked like a charm. Thanks for a good video m8 :)
Tks a lot
I just spent 60$ at my Pc repair shop--and they could not fixe my problem
and with your instructions I fix it in 5 min
Tks again
Very clear instructions
Thank you so much for uploading this video because it helped me solve my problem with my computer. Windows 7 on my computer wasn't booting properly then it tells me to boot from startup repair. Thanks alot because it helps.
You did it! Thank you so much. Excellent commentary clear and precise. Very easy to follow along with. Definite thumbs up.
Thank you so much for this excellent tutorial!
I have a brand new HP Elitebook 850 G1 with Windows 8.1. Due to an incompatibility issue I got "Error: 0xc0000225" and this rebuild bcd trick worked.
Luckily I had made a recovery flash drive on a memory stick. By inserting it, turning on the notebook, and tapping on f9 the LED of the stick flashed for about 2 minutes. Then I could get to the command prompt via Troubleshoot > Advanced options.
All I did was right away type in:bootrec /rebuildbcd
After that I typed in: exit
Then clicked on the top right corner X so the command prompt closed. Now I was back on the light blue screen with and chose the Shut down computer option.
To my very glad surprise my familiar desktop screen appeared in a few seconds!
Cool! Because I had followed some other tutorials but none worked for me.
I'll post a link to this video on the HP forum in a thread I called: "Error code 0xc0000225."
Thank you so much JAGTutorials!! YOU ARE MY HERO
Great! It works and fixed my PC win 7, 64bit. I had try many ways to start the windows.,but it can't success. When I follow this video on the second step, open the "Command Prompt" than key in [ bootrec /fixmbr ]. Finally, I can started my windows again. Thanks for sharing this video.
Thank you very much. you've been alot of help. I followed this video and it worked great. don't stop on tutorials like this because there alot of help.
Excellent tutorial, Very descriptive. Keep it coming.
Thanks a lot JAG !!! A really professional way of explaining every detail step-by-step...Take your LIKE!!! Sure the dislikers either don't understand english, so you can make this video in chineese for for those.............s, or you're just too smart for them...:))
Sir, you are a lifesaver. Your video on booting Windows to USB using WinToFlash, and especially this video helped me a lot. I really thought my old laptop was a goner when it showed 'bootmgr is compressed'. I'm no IT, but following this instructions, I was able to open up my laptop again. I can't express how much I appreciate this video of yours. So THANK YOU SO MUCH!! Keep it up, sir.:)
Thanks a lot....this very helpful....I had tried all other possible source but unable start my laptop....after tried this information and my laptop is started
Thank you very much, I was ready to send my HD back to WD but i did what you said and it works fine now.
Once again thank you.
You make my day! Great tutorial! Thanks!!!
Wow I don't know what I would say ! Thank you a lot teacher! I fixed my computer problem !!!
Man you are my hero, i just being called by telephone and help my friend!
besides harddrive idk then, but if its a boot problem, try typing in on command promt, bootrec /fixboot
what does it mean reboot and select proper boot device or insert boot media in selected boot device? I have my windows 7 disc in the CDRom and priority set to CDROM as number 1.
Worth a try but didn't work for me, the Dell I am trying to repair gets as far as preparing the computer for first use but then just hangs. I can't even get it to go into safe mode.
Thanks
Thank u soooo much. It works with me, I was gonna to reinstall a new version of windows but it's help, so thanksss so much
bootrec commands both are great. Startup still didn't fix it and my system didn't come with a backup disc. I finally got an operating system to show, but forgot to highlight/choose it. It now bypasses and goes directly to Advanced Recovery Options. How can I get this "Choosing Operating System" window up again? This would help tremendously.
you're geeeeeeniusssss. thank you so muuuuuchhh 😭😭😭
Guys someone can help me? When i am typing cd boot , i have "the system cannot find the path specified".Please!!!
When I enter the fixboot command, the cmd says the following: The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
Any fix for this?
Thnx man you're- freaking life saver
I got windows vista business 32 bit . When using bcdedit to export i get message "the system cannot find the file "... And when I try to switch to C: drive it says "The file or directory is corrupted and unreadable". Does that mean hard disk is completely dead??
You are my hero! Thanks alot. Mine didnt want to reboot so i just chose start to last known good configuration
Tu e foda mano !! Parabéns 👏👏👏👏
After everything was done I tried starting my computer in safe mode, safe mode with command prompt, and normally but it still wouldn't load.
Thanks sir for the tutorial, is the reinstallation dvd the same media dvd you talk about? This is the one that came with my computer, i'm running Vista. Awaiting response..Again thanks.
what do I do if the disc I used to install windows won;t allow me to get into the repair your computer screen? I keep getting the error that the disc isn't compatable with this installation, and to insert one that is
i have a win 7 ultimate disc and did what u said but when i hit fix and repair problem it only shows the mouse and thats it it does nothing .....
Thanks for the nice illustration, just want to ask you, my windows 7 DVD does not show the option "repair", it starts with (I think) second screen containing loading windows files, and then proceed to install new version and keep the old windows files in the folder, old windows. I do not want to go through this new installation, I just want to repair my system files, sfc scan cannot repair them, resulting in many problems, such as dinotify.exe error, jscript.dll, just in time debugging, Thanks
Thanks a lot, but what if the HDD failure and plater runs fine and head makes noise sometime, While OS 7 starting it's locked up at the logo/welcome screen!!! USB bootable flsah drive couldn't detect though every function is alright but HDD won't shows up, then removing that USB FD and restarting that HDD shows up the freeze screen, sometime couldn't detect....
Thank you very much this worked. I tried doing many other things but this worked. So i think what happened was a I accedently downloaded something with a virus and when I went to start it up this morning it was no go. Thanks very much
Can I use the start up repair contained in Windows 7 CD for Windows Vista? I believe is the same...
Yes, just use: bootrec /fixboot, if it doesn't work use: bootrec /rebuildbcd. Just follow the video
after startup, I get recent hardware or software change might have installed a file that is signed incorrectly of damaged, or that might be malicious software from an unknown source. try the recovery disc option.
OTHERWISE press f8 for advanced boot options and select last known good. if you understand why it cannot be verified temporarily disable driver signature enforcement.
>>>> HOW DO I Get to "disable driver signature enforcement" ?? So i can start up and put my product key in??
Is it possible this issue can get fixed without inserting some disk or whatever it is we would need? may sound like a stupid question but with these solutions there is nothing i can do about it when it comes to inside out of you're own PC. I'm not all that professional at computers or repairing things, i could take this to someone if i run out of option to this BS error or whatever video i go to that isn't helping. I hope you give me some better solutions please so i can hit back to my Windows 7.
I have done every thing in the video. Windows reboots and says "preparing start up". Then it loads to a black screen saying this version of windows is not genuine(build 7601). How do I fix this?
on the last step after we press enter for rebuild bcd, the system scans but doesn't find and windows installation "total identified win. installations:0" what do i do then?
Hi , tried several times. unable to rebuild BCD. given message as corrupt or unreadable BCD. also I have only one hard drive. it shows three partition.
partition 1 is for recovery, partition 2 is questionable(only 100 MB -primary???),
Partition 3 is the actual partition for primary. How do I delete partition 2 or what is the solution for this..Thank you
Hi, I did these on my Windows 7 (only the bootrec /mbr and fixboot) then when I started my computer it fixed the boot problem and then I just saw in my desktop on the lower right side writes "Windows 7 Build 7600 This copy of Windows is not genuine" .. What to do? Please help thank you
Thank You This really worked for me. I have a asus computer with windows 7. Thank you so much.
alright so what I decided to do is name the folder differently , instead of c:\boot\bcd bcd_backup1 , is it alright if i kind of switched the file names?
WOW very comprehensive Sir and very useful and helpful :D thank you so much! Bless you!
You my friend have earned a sub :)
Thank you so much. You fixed my computer for me!
it worked for me. thanks alot coudnt have did it myself. keep up the good work
incredible! thanks just saved me the pc! I am a designer and have much important stuff!
You saved me! I couldn't start my computer at all, now I can start it, & run all of the programs. However when I start up it still says "Problem starting....specified module could not be found" any suggestions?
It days I need to insert a installation disc but I don't have one. What should I do? And does this delete what ever was on my Computer?
Great Video! This did the trick. Thanks man.
My start up doesn't show the logo. :/ Please help!
please help me out! I did the same process as the video, but when I clicked the restartutton, then it went back to where it says "press any key to... CD and DVD"
This saved me a lot of time thank you so much.
Ok so I put in the e: what ever them I put the CD boot and to said "the system cannot find the patch specified" what do I do
You the man, Nice Job
Thank you very much for a outstanding explanation. Thank you. You save me lots of haours trying to fix my pc. Gracias de todo corazon.
Good sa ton...you are the best...merci beacoup😘😘❤❤❤
OMG YOU, SIR, ARE A LIFE SAVER!!!
Thanks Very Much. With the elaborate BCD rebuilding as narrated and shown by you, I was able to restore my Windows 7 Pro back into operating condition with my personal data files intact. Although my Compaq Presario V5000 has only a single partition (C:) the repair window showed as in your video d: Any reason as to what could have caused this problem out of the blues (I have a genuine win7 pro disk). Thanks again.
if it says stuck on "on please wait since this may take a while" it seems its slow so you might have some harddrive errors
I really messed up my computer real bad im trying to do this but when I get to 4:03 on my computer it doesn't show anything there so I can't boot. Also im trying to figure out what my hard drive should be formatted so that I can install a new windows 7 is there a way you can help?
I finished the complete video and I got successfully scan Windows installation total identified Windows installations 0 so what do I do from this point?
I have a Dell laptop and it has Windows 7 on here with Intel onside core i4... if that's any help I would greatly greatly appreciate it. I know it's been some time since you did this video but hopefully you will see this and get back to me thank you .
Hey I have a huge problem I think, my os doesnt appear when I start the system recovery options it doesnt even scan for it it just pops up the window with the restore using image button selected and I dont know how to load the drivers manually please help!
Thanks it worked and saved me a lot of time
what operating system do you have and what cd are you using to fix this?
Great! very useful , I fixed my father's laptop
Hi
I've folowed your fist command :bootrec \fixmbr) and it was ok.
I've folowed the second command (bootrec \fixboot) and it said : element not found.
So, I do not know what to type nex or to do next
Can you help please ?
Thanks
I have a toshiba laptop with windows vista that does the post boot but does not show anything, no windows logo, no startup at all just a blank screen. I tried everything on this video and still nothing. Any more tips or ideas. Thanks in advance.
hey dude i tried you're tutorial.. but it didn't show me the selection of repair windows etc. it ended to "where do you want to install windows" and there's a caution notif. the "Cannot install windows to disk 2 blach2 "the disk may fail soon"
what if i format it?? co'z i only want to repair it co'z it wont bootup
Thank you for a moment I thought I had to format
hi,
i did all the steps and like Scott R i got windows installations installed 0 so can you help regarding this problem??
please help if you know a way that this can be fixded...
thanks
Cheers mate... It worked...!! Thanks for ur video..!!
Super friend it's working in my laptop thanks lot
The repair tools didn't detect my W7 OS...
After running commands shown in the video, it still doesn't detect my OS, and problem isn't fixed...
Thank you , Really appreciate it worked for me .
HOW DO YOU FIX A DELL N5050 WHEN THE OPERATING SYSTEM IS NOT LISTED IT SAYS I HAVE TO LOAD DRIVERS WHICH I CANT FIND PLEASE HELP
it works until it gets to bcdedit /export c:\BCD_Backup1...
it says that error exporting the archive, and can't find this file...
Help pls !
i dont have a cd but i have a bootable usb how do i fix it with the usb plz give me a command to do in the command prompt please
I LOVE YOU GUY!
nice tutorial, you saved my ass!
thanks
Man thanks you made my day and my pcs day thnx big help
it doesnt find anything in the Cd boot step, and when i use /dir to see if there is "Boot", it doesnt appear any folder with that name. My english sucks
well if you can get on command promt with the boot cd, you should try scanning your hard drive, type "chkdsk" without quotes other than that just rebuild the bootmanager orr reinstall windows and yes i know you would lose all data likethat but only way honestly
make a sfc/scannow off, or rebuild the registry these is the last steps before you reinstal your windows OS again,in my situation works perfectly
thanks man, that was helpful .
ok i know this is a late reply sorry, but you using your windows 7 cd disc?
I have no option to choose an operating system. What then? Like I have no hd to install an os to but my hd is good
THANK YOU VERY MUCH MY BROTHER,, YOU SAVE MY DAY,
IT WORKS,
i wouldn't tried this... but i don't want to risk losing all of my memory... going to like anyways cuz i just enjoyed watching da video doe :333
If this was not my initial problem, (and did it anyway) do I need to reverse anything from these steps or should it run fine with these changes?
If anything you may end up with a boot issue for another os if you are running multiple os's. Otherwise you don't need to revere anything.
it works for me thx buddy you saved me great work :)
Works great for me! Thanks so much!
Excellent Bro It's Working Very Nice .. Thank U Very Much Bro
Thank you very much!!! This worked perfectly
it still giving me problem ..... its my graphics card why it not starting up
same problem for me .. my windows 7 ultimate got corrupted due to graphics card. and still now I could not able to recover my os
Thank you very much
These is so easy
is it still broken? and if so is there any chance you can get on command prompt?