I love that this kit involves no cutting or the use of a soldering iron and it's completely reversible. I might have to get one of these kits once my warranty runs out
@@reaksyt1787 well here in Australia we have a compulsory 3 year warranty, but in most places i believe it's 2 years repair or replacement warranty from Microsoft
It would have been cool if it was included stock from factory and have lighting effects depending on what’s happening in the game like the light bar in the dualshock 4 controller
One thing that you’ll have to think about is if you want your Xbox to run and have the fan on you’ll also always have to have the leds on.. seems awesome at night but idk if I’d want the lights running all the time..
result is nice. its worth the work of around 1 or 1,5 hour :) you do this once and enjoy it. just follow the videoinstruction and it should be no problem.
I have a question... Since warm/hot air emanates from the top fan, wouldn't that loosen up the strips over time, and may cause them to fall off and get entangled with the fan?
@@ZER0x824 just got the halo one and thought it would go perfect with some lights but had the same question of falling off. Now I have to try these lights out!
@@louistorres0054 definitely worth the buy and the easiest one to install. I felt like I was doing surgery on my halo xbox because it is a beautiful console and I didn't want to damage it lmao.
I was going to use 4-in LEDs on each of the four sides and solder it direct or just run it 5V, but then I thought about just getting a new 130mm fan with lights and replacing the fan that's in it, it's the cheapest most simple solution there is, you pull it out unplug it plug it in slide it in done. That being said, this looks pretty cool, I just watched the basic video for it and I haven't watched all of the install yet but I'm hoping the lights are all the way on the inner blades, otherwise it would light it up just as much with the lights going around the edge of the fan.
Not sure if I would trust this tho.. the Led strip could come off and fall into the fan. And the fan connector Is pretty weak. However if you wanted to do this I’d just wait for RGB Fans to be made. It’s a 130mm fan btw
@Green Grugach yeah they know if you damaged the console. I would do this mod but tbh I can’t be bothered 😂 I’ve got the leds that go around the base. They are the same as this mod but obviously not in the fan. Made by the same person tho. All the best to you too mate!
Just be careful that middle screw in the inside can be tricky it was so hard to come out it strip lucky I had a small dill I had to make another hole on that screw to use a special screw drive with 2 spikes to remove it but after that it was a breeze to install
Hi, unfortunately the remote control is not working. Battery is inserted and you can see a red dot when pressing any button, but the lights are not changing…what can I do?
Seems simple enough. My initial concern was, will these cause any air flow restrictions. After watching, no, I highly doubt it does. My next concern, after watching is, how well does the glue on the dots hold up to heat? This thing runs hot and if the glue was to melt and the strip drop into the fan, that would be disastrous. Also, after initial setup, do I need the remote to turn it off and on, or will it power off and on with the console?
@@BeanpotPubParlour yea that sucks I would think it does to which would Be more convenient then looking for a remote or when lose remote Mayb hopefully thy can redesign it for a newer version I guess ima wait then
i love this kit but i have one small problem, i use the auto play option and it only does two effects, rainbow and then white. Not too worried about it just would like for it to work. But maybe it just takes longer for it to change idk.
FYI this will not avoid your warranty as Microsoft stopped doing it so as long as you don't break something then opening the back will not avoid your warranty.
Well, purchased this from Amazon and installed it today. It was as simple as it looks. I must say, I am utterly disappointed that the LED lights stay on even when you power off the console. You need to find a way to fix that!!!
@@dawsonpittman4776 The remote has ON/OFF but if the console and fan it draws it's power from is OFF it should be automatically OFF too... Bad design and bad programming!!!
My Xbox unfortunately broke because of the LED. The Power Supply of the Xbox broke. So now i need to repair my Console. But i did on my own Risk. I will deinstall the LED also but it was cool to have them.
@@ExtremeRatei know this was a Year Ago but to answer the question how this happened, i think the Control Board of the LED that you stick inside the Xbox, caused my Xbox to Overheat and this caused a Shortcircuit. But i got it repaired 👍
Cheap counterfeit tape stuck to a dusty/greasy surface then yes. But good quality adhesive on a perfectly clean surface will last for many years/decades, its used more than most realise in automotive and that takes a lot more of a beating than a fan in a games console ever will.
The LEDs cant go inside the console if you dont open it lol. Ig if you want them outside it then you could just buy some battery powered LEDs and put them on it
This is 100% safe? How much power does the LEDs uses? I’m a bit worried since the Fan header is Designed to just power the fan and no Leds.. don’t want it to blow up the fan Connector
Hello, I bought two LED mods for my Xbox Series X, one for the base, and one for the fan. The problem is that both remotes control both mods at the same time. They are on the same frequency. Do you have a solution?
its really dope but is it really worth it for $40 and its just a light strip i thought it was a whole new fan idk only because the xbox sits tall so you cant see it and when you lay the xbox down you still cant see it at least where i have my xbox i wouldn't be able to see it it would be facing the wall so idk im hesitant to pay for it when i cant really show it off like i would want to
Hey so I’m trying to get the warranty for my “rise remap kit” I don’t have any other social medias so how do I go about this because I was sent a kit, where when I finished the install, my down on the Dpad was not working and left and up would be clicked at the same time when either one was clicked?
Please reposition the connection part of the main flex cable, make everything aligned. If the problem stands still, please contact us via email at info@extremerate.com, thanks
How has the adhesive held up? The only thing holding me back from this is the led strip unsticking from side of the fan and falling in the fan itself causing damage. I went to see how this holds up long term? Thank you for the great vid!
Anyone asking about the adhesive... it's 3M mate... they go alright under high stress... a lil bit of warm air from a series x isn't gonna do squat hahaha
Cool, but I’ll wait till someone makes a new fan that’s better quality then original and has the led lights built into it. Also the lights need to shut off when you turn the Xbox off and not by finding the remote!
Don't not put the cables like in the video it rubs on the fans second off my remote would not work until i pulled the tag out and removed the battery then put it back in
I'm not seeing the 39 modes?? I'm seeing 3-4 just different colors. It's a simple install. But installation guides are 100000x with talking and explanation
Leave it to Microsoft to make things so damn complicated lol just put these on my PS5 and it was so simple. Sides pop off apply LED’s sides pop back on! I love little projects though so I’ll be looking forward to putting these on my Halo Infinite XBone!!!
ähm .... "complicated" ... microsoft/xbox? as long as you have to be a mechanic to change/expand a SSD HD at PlayStation you guys shoul be quiet ;) this is done in seconds at XBOX SERIES X/S. can be done by childs without any tool. Just to remind you "For the Players" and things ;) @topic .... looks sweet. i think about to order it. i bought and installed it. tooks me around an hour or 1,5. The result ist worth it. @savage hitta .. comeone ... *rolleyes*. even as a xboxfan
PlayStation 5 is also the size of the burj khalifa tower in Dubai. Bigger, Worse engineering = easier to work on. It's like comparing working on an old Ford to a koennisegg
Cool product but no way am I paying $53 Canadian for some LED lights. You can buy light strips 5m long for $9.99 and come with a remote. Cool but a rip off.
you think im going to void my warranty just to install this they trippin. i saw an external fan that fits perfectly on top of the xbox and it has rgb lights, i rather get the fan.
I love that this kit involves no cutting or the use of a soldering iron and it's completely reversible. I might have to get one of these kits once my warranty runs out
How long does it last in total
By that I mean the warranty
@@reaksyt1787 well here in Australia we have a compulsory 3 year warranty, but in most places i believe it's 2 years repair or replacement warranty from Microsoft
How long will that be?
@@TheJackInTheBox916 well given that I've had my console about 2 years, in another year I guess
It would have been cool if it was included stock from factory and have lighting effects depending on what’s happening in the game like the light bar in the dualshock 4 controller
That sounds amazing!! Missed opportunity from Microsoft :(
It does sound great.. But if the lights fail that's a console return... The lights will fail before the console.
@@bobbydazzle4113 True
Worthless feature and a battery drain. Who even looks down at their controller
@@AeonsOfBlight You right but you know how we gamers our with our RGB and stuff
The undisputed champion of next gen gaming accessories!
Thank you so much bro! :D
Just got in and installed mine and it’s was extremely easy and looks awesome
Wife beater.
One thing that you’ll have to think about is if you want your Xbox to run and have the fan on you’ll also always have to have the leds on.. seems awesome at night but idk if I’d want the lights running all the time..
Turn them off with the remote
Turn them off with the remote
Same Bro and idk Why
Ordered 1 just now coming tommorow super hyped just cleaned my series x in preparation
thanks for the led strip and the video. ordered it few minutes ago for my series x. will report after installation. merry xmas
result is nice. its worth the work of around 1 or 1,5 hour :) you do this once and enjoy it. just follow the videoinstruction and it should be no problem.
@@Schiessburger01 what are the led lights called
@@anthonyaviles5774 in the description
Let the mods begin, great video dude
I love these videos and I love the products they make keep up the amazing work 🎉
what if you lose the remote? screwed?
Love it.. my series X looks awesome now 😊 very easy to install!!!
I just got done installing these and there doesn't seem to be a way to have them automatically turn on/off with xbox???
I have a question... Since warm/hot air emanates from the top fan, wouldn't that loosen up the strips over time, and may cause them to fall off and get entangled with the fan?
Nah, it's really sticky just pulled it off my console because u got the halo edition now I gotta buy a new one so definitely won't fall off.
@@ZER0x824 just got the halo one and thought it would go perfect with some lights but had the same question of falling off. Now I have to try these lights out!
Yeah nah it should be fine
@@louistorres0054 definitely worth the buy and the easiest one to install. I felt like I was doing surgery on my halo xbox because it is a beautiful console and I didn't want to damage it lmao.
@@ZER0x824 💀 I want to do it but if my xbox breaks accidentally I will be so annoyed
Just awesome!!! For the both consoles
I've just mounted it in my Series X, the leds works but the remote don't. The led in the remote works but it doesen't change strip colors
I have this same issue
Did this to mine, looks great but my remote doesn’t work
You had me until wait 24 hours to use the console.
I was going to use 4-in LEDs on each of the four sides and solder it direct or just run it 5V, but then I thought about just getting a new 130mm fan with lights and replacing the fan that's in it, it's the cheapest most simple solution there is, you pull it out unplug it plug it in slide it in done.
That being said, this looks pretty cool, I just watched the basic video for it and I haven't watched all of the install yet but I'm hoping the lights are all the way on the inner blades, otherwise it would light it up just as much with the lights going around the edge of the fan.
Not sure if I would trust this tho.. the Led strip could come off and fall into the fan. And the fan connector Is pretty weak. However if you wanted to do this I’d just wait for RGB Fans to be made. It’s a 130mm fan btw
That sounds a great idea!
@Green Grugach yeah they know if you damaged the console. I would do this mod but tbh I can’t be bothered 😂 I’ve got the leds that go around the base. They are the same as this mod but obviously not in the fan. Made by the same person tho. All the best to you too mate!
@greengrugach1984I'm still looking for ya pot of gold. 😁 ☘️
PLEASE HELP! I’ve had this product for a year, however the remote control I think is not working, does the remote control take batteries?
Just be careful that middle screw in the inside can be tricky it was so hard to come out it strip lucky I had a small dill I had to make another hole on that screw to use a special screw drive with 2 spikes to remove it but after that it was a breeze to install
mine is stripped rip, what do u reccomend?
Hi, unfortunately the remote control is not working. Battery is inserted and you can see a red dot when pressing any button, but the lights are not changing…what can I do?
Same problem here only I don’t have any lights going on at all… I don’t know what I’m going to do
Seems simple enough. My initial concern was, will these cause any air flow restrictions. After watching, no, I highly doubt it does. My next concern, after watching is, how well does the glue on the dots hold up to heat? This thing runs hot and if the glue was to melt and the strip drop into the fan, that would be disastrous.
Also, after initial setup, do I need the remote to turn it off and on, or will it power off and on with the console?
It does not go off when the console does. I was so disappointed by with this. Terrible design.
@@BeanpotPubParlour yea that sucks I would think it does to which would
Be more convenient then looking for a remote or when lose remote Mayb hopefully thy can redesign it for a newer version I guess ima wait then
Unplug it
@@joelcreer9503 No, that is dumb. There's a remote if you want the light off but it should go off when the console is off.
@@BeanpotPubParlour does it turn off by itself?
Led strip gets warm falls off the the fan gets too chew it up sounds like fun
why just adhesive dots and not the entire back of the LED strip???
The dots are extra sticky, the strip does have glue on it, And it's also really sticky.
i love this kit but i have one small problem, i use the auto play option and it only does two effects, rainbow and then white. Not too worried about it just would like for it to work. But maybe it just takes longer for it to change idk.
Have y’all guys made one for the Xbox s yet?
As soon as he bust out the hair dryer I realized it's gonna be a pain in the ass.
You dont need the heat gun at all. But it makes it just the slightest bit easier but I assure you that you dint need it
It works for my series s I don't see why not extremerate 🤔
Is it anyway i can sync the lights to cut on and off automatically?
FYI this will not avoid your warranty as Microsoft stopped doing it so as long as you don't break something then opening the back will not avoid your warranty.
What do you mean? Cause usually the stickers covering the bolts are for that purpose. To check if you opened it or not.
@@ivomilo6210 they made it illegal to put warranty stickers on now it only warns them that you opened it.
Well, purchased this from Amazon and installed it today. It was as simple as it looks. I must say, I am utterly disappointed that the LED lights stay on even when you power off the console. You need to find a way to fix that!!!
Is there no on/off button ?
@@dawsonpittman4776 The remote has ON/OFF but if the console and fan it draws it's power from is OFF it should be automatically OFF too... Bad design and bad programming!!!
Unplug the console
@@joelcreer9503 Why? Who the hell unplugs consoles??? Dumb!
Look for a standby 5v point on the mobo and connect the led instead of the continue 5v. Simple but more work.
Can you tell me something else that you can’t mod? you guys are so talented
lol thanks bro
My Xbox unfortunately broke because of the LED. The Power Supply of the Xbox broke. So now i need to repair my Console. But i did on my own Risk. I will deinstall the LED also but it was cool to have them.
OMG how does it happened?
@@ExtremeRatei know this was a Year Ago but to answer the question how this happened, i think the Control Board of the LED that you stick inside the Xbox, caused my Xbox to Overheat and this caused a Shortcircuit. But i got it repaired 👍
why does the LED strip even have that blue removable paper if it's not adhesive on the back? you stuck adhesive dots on it instead
Because we want the strip more sticky
Ok so I did everything you did and it works perfectly but now the fan is very loud what can I do to fix that could the strip be to close
Could be that controller you place inside for The leds. The fan plugs into that so..
I used the original extreamerate RGB for the Xbox and did this 2 months ago 😎
Oh that's you! I saw the pic, great job!
Did a full tutorial on the same thing different method 6 months ago
Not gonna void warranty on xbox. But I did add the lights to my ps5 and replaced buttons on both dualsense. Awesome products 👌
can you make one for the xbox series s?
Knowing what self adisesive tape is like I would avoide this mode, those thing will come unstuck in a few weeks/months and all hell will break loose.
Cheap counterfeit tape stuck to a dusty/greasy surface then yes. But good quality adhesive on a perfectly clean surface will last for many years/decades, its used more than most realise in automotive and that takes a lot more of a beating than a fan in a games console ever will.
My remote is not working. They’re on I just can’t change any settings or turn them off
Пока мы живым в 2023, китайцы живут в 3023 году. Это просто сверхлюди! Обожаю вас, парни!
Please make one that doesn't require console to be opened.
The LEDs cant go inside the console if you dont open it lol. Ig if you want them outside it then you could just buy some battery powered LEDs and put them on it
@@szandyrclendenen3159 or take a liitle cheap battery Chrismas led chain, and put some of the leds in the back of the xbox.
can we just fix one color? I got the Halo Edition and I want just blue
It's got many colors and effects.
Will the fan still spin, even if the lights are turned off?
I dont have that little sticker at the bottom. Mine has a hard piece of plastic
Do you still reply to comments , my remote isn’t working how can i re sync it
Hey is this discontinued? Because i cant find it in your store
Do they come on n off with the console? Or are they only on and off with remote?
can you please make one for the series s
This is 100% safe? How much power does the LEDs uses? I’m a bit worried since the Fan header is Designed to just power the fan and no Leds.. don’t want it to blow up the fan Connector
No because the fan doesn’t use a lot of power and the leds don’t add much either it works perfectly for me
Does this work with the Xbox Series S?
I'm pretty sure it does not void the warranty in the USA.
Same in the UK. I think its more around "why" you are opening it, rather than simply removing a sticker.
does the lights automaticly turn on if u turn the console on or have u turn it every time on manually?
Hello, I bought two LED mods for my Xbox Series X, one for the base, and one for the fan. The problem is that both remotes control both mods at the same time. They are on the same frequency. Do you have a solution?
Can you please tell the tool you used to open your Xbox series x I need to clean mines out
The fun Connected have 4 pin ?!?! Thanks !!!
Nice video!
its really dope but is it really worth it for $40 and its just a light strip i thought it was a whole new fan idk only because the xbox sits tall so you cant see it and when you lay the xbox down you still cant see it at least where i have my xbox i wouldn't be able to see it it would be facing the wall so idk im hesitant to pay for it when i cant really show it off like i would want to
So my question is that will this short out the system or have any issues with that whatsoever?
Good question but I don’t think it would
Hey so I’m trying to get the warranty for my “rise remap kit” I don’t have any other social medias so how do I go about this because I was sent a kit, where when I finished the install, my down on the Dpad was not working and left and up would be clicked at the same time when either one was clicked?
Please reposition the connection part of the main flex cable, make everything aligned. If the problem stands still, please contact us via email at info@extremerate.com, thanks
@@ExtremeRate ok I’ll check again when I get home and then if it doesn’t work I’ll contact you guys
I’ve got a full on laser light show in my room now 😆👍🏻
Does it rotate the opposite way or I just have to install the strip in reverse instead?
You have to install the strip in reverse
This was my concern too. You would want the lights to go in the same direction as the fan spins.
I know what I wanna do but I don’t know if I have the strength to do it
It's not that difficult!
so what happens when the glue deteriorates?
The strip drops off and gets shredded by the fan and u say goodnight to ur xbox
@@apzrn2735 👍
How has the adhesive held up? The only thing holding me back from this is the led strip unsticking from side of the fan and falling in the fan itself causing damage. I went to see how this holds up long term? Thank you for the great vid!
I'm sure the adhesive would be strong enough and the fan part doesnt get warm so it shouldn't unstick I already ordered one I cant wait to install it
@@aftaahlife the fan gets Very warm… it’s pulling air into the console to cool it. That air can be as hot as 50+ Degrees C.
@@ARXInfinite if it's pulling the air in it shouldn't get that hot, if it's an exhaust fan then it may get warm
@@mattchumoore4214 it’s an exhaust fan. The console pulls air from the bottom through the heatsink and the rest of the console and out the top
I installed the rgb inside the fan made all the connections etc. Turned on the xbox but the lights don't light up why
Use the remote that comes with it 🤦🏻♂️
Anyone asking about the adhesive... it's 3M mate... they go alright under high stress... a lil bit of warm air from a series x isn't gonna do squat hahaha
But if you break your Xbox the warranty is voided so you would have to buy a new one so I would not risk it
Are you planning this mod with Alexa support or smartphone app ?
🤣🤣🤣🤣
😂😂😂😂
Music?
Got it and it's great 👍
I own a modded ps5 but this looks dope af
Thanks!
There is now lighting from eXtremerate for the PS logo.
@@Christian-po3sl rally now?! 🤔
@@gulla04 jup.
Cool, but I’ll wait till someone makes a new fan that’s better quality then original and has the led lights built into it. Also the lights need to shut off when you turn the Xbox off and not by finding the remote!
So my bf has it likes it.. curious if it's ok that fan is now louder than before.. does that mean it's not on right?
hey bro do you know something like this for series s ?
Beautiful
My led remote doesn't work
I wish the green LED fan was stock. Instead, they only painted it green.
Does this slow down the fan a little
I installed it and I feel like it does
Don't not put the cables like in the video it rubs on the fans second off my remote would not work until i pulled the tag out and removed the battery then put it back in
Just wondering cus my fan keeps spinning, is this supposed to happen or not even when my console is off the fan spins
F’d
Does the led turn off when you turn the console off
no, you have to turn it off with the remote
@@ExtremeRate Well that is dumb.
I'm not seeing the 39 modes?? I'm seeing 3-4 just different colors.
It's a simple install. But installation guides are 100000x with talking and explanation
My remote doesnt work.
Definitely NEED
GO!!
Crap, you need standby power direkt from the psu to feed the leds. Now you have manually switch the leds on and off.
Leave it to Microsoft to make things so damn complicated lol just put these on my PS5 and it was so simple. Sides pop off apply LED’s sides pop back on! I love little projects though so I’ll be looking forward to putting these on my Halo Infinite XBone!!!
Lol I know right, you can access the PS5 just by popping the plate. This shit you have to bust out the damn hair dryer.
@@WheeledHamster that's why gaystation . I mean playstation is so trash 🗑️. Thin weak n flemsey
ähm .... "complicated" ... microsoft/xbox? as long as you have to be a mechanic to change/expand a SSD HD at PlayStation you guys shoul be quiet ;) this is done in seconds at XBOX SERIES X/S. can be done by childs without any tool. Just to remind you "For the Players" and things ;)
@topic .... looks sweet. i think about to order it.
i bought and installed it. tooks me around an hour or 1,5. The result ist worth it.
@savage hitta .. comeone ... *rolleyes*. even as a xboxfan
@@savagehitta2788 was that supposed to be funny
PlayStation 5 is also the size of the burj khalifa tower in Dubai. Bigger, Worse engineering = easier to work on. It's like comparing working on an old Ford to a koennisegg
I'll think 🤔 about it too much for me
I did my ps4 like this but I didn't have to open it 😤
The little 3m sticky dots were a pain with how big my hands are lol
Same
Will this void warranties?
Ye
I just did this and now my Xbox button won’t turn white
All this need to take the console apart what if it wouldn't play anymore what if you messed something up.
Nice gadet but the price is too high in Germany. 40 Euro is too much for a led stripe.
Where can I buy this besides your website
Amazon www.amazon.com/dp/B09JYTXG2B/
My remote not working
Cool product but no way am I paying $53 Canadian for some LED lights. You can buy light strips 5m long for $9.99 and come with a remote. Cool but a rip off.
Are you guys planning on making any real mods for the controllers rather than leds and stuff
WOW I love it, where can I buy in Europe?
The inventory to EU is on the road, please wait for a couple of days!
@@ExtremeRate thanks for the reply. If you could let me know when there is stock here, I appreciate it.
@@EliTeAIM We are having trouble with adding the new products to Amazon EU, we are going to fix it in about 2 weeks, sorry
What about the Series S? 😭
We checked inside of the Series S, but it seems there is not enough space for the strip :(
@@ExtremeRate :(
@@outbadbrutal3786 you have a link?
@@ExtremeRate not enough space for the LEDs? Or the green microboard
Soon as warranty expires I’m doing it!
you think im going to void my warranty just to install this they trippin. i saw an external fan that fits perfectly on top of the xbox and it has rgb lights, i rather get the fan.