Haha yes is was indeed. I need to remember to spray some soapy water of alcohol in there to make it slip out a little easier. Thanks and thanks for watching x
I like the mold very much except for it being such a struggle to demold. I love the colors you chose. The flowers were a good choice. All in all a pretty project.😊
@@heidih.2465 Thanks and thanks for watching. No, I don't think it would have helped. The main problem I found was that the supports to help prevent it from sagging in where a little chunky, so made it hard to squish the mould in on itself to remove it from the internal sections. Thanks for the suggestion though. x
Thanks & thanks for watching. Yes I I know, I was shocked when I couldn’t find it anymore. Pretty sure I have seen it on a couple of other sites. I will update the description if I come across it on any of them. x
I have the bath mold 😂😂😂😂 ... took 10 minutes to get out. However, even if not fully cured, that is the moment to remove from the mold. Resin goes back to form. Why are you working in a place that is so cold? I had not seen this mold before. 😊
Wow was thinking about getting that mold. Might give it a miss now lol. Yes I do try demolding when it’s still a little soft however not always easy for me to get back into my studio in time to do so. It’s basically an old shed which we rebuilt during lockdown and as I’m disabled, getting outside to get there can be a little difficult. That’s also why it’s often cold this time of year. My little heater takes a while to warm up the space. But it’s my little getaway from the house place lol. Can you tell I don’t get out much pmsl 🤪 x
Thank you! You too! Don’t forget to place something along the straight edge on the base of the main mold so you don’t get a wonky base. Also yes, I know the feeling about many others to try lol. x
@WendigovanStudio I will do thanks for the tip much appreciated. Haha, I went on a temu rampage last year and got so many, and some have been done too many times. But hey, they are great to start out with and put our twists on them.. look forward to your next upload x
Thanks for watching. Sadly it’s no longer listed on Amazon where I bought it. It’s completely vanished. But I’ve seen it on another site but still trying to find where it was. As soon as I find it, I’ll share it. X
Did you make your pigment paste? It looks odd. You can spray soapy water 🧼 into your molds after they are cured, and they will un-mold much easier. Craziest mold 🤪 I have ever seen. You can't even use the top drawer and not much will fit in the other drawer.
Thanks for watching. No the pigment was a prepaid 1 which I got some time ago. It might look a little odd due to it being a chameleon pigment. I think I needed to add more than I did to get the true effect. I keep forgetting to bring a bottle of soapy water out to the studio, but it will be on my list. Yes the mold is crazy but I think it’s more as a display piece rather than a fully functional unit. x
Thanks for watching. I did for the drawers but for some reason my brain thought it would be funnier if I just struggled lol. Will for sure be using it for the shelf unit in future too x
Hello my lovely. I love this pot!! I know how you feel with trying to demold with painful hands!! I have Fibromyalgia and run my channel 'HomemadeMiraclesUK' doing crafting, mainly resin. It's mental trying to unmold some of those things we torture ourselves doing 😂. Xxx
Hiya, welcome and hello fellow fibro warrior. Yes it is torture but I am sure you know that if we didn't , we wound be in a very sad place in our minds. Thanks for watching and I also subscribe to you too xx
@WendigovanStudio aww thank you huni. My name is Lori. It's nice to see another UK crafter on YT, most are from US! Looking forward to watching more of your videos. Xx
Thanks for trying this for us. I’d want to buy the mold if I saw it also. Great color choices!
Thank you! Cheers! x
I found 1 on AliExpress so I’ve added the link for that in the video description x
The struggle was real, I could tell. That is indeed a cute little mold. You make came out very cute
Haha yes is was indeed. I need to remember to spray some soapy water of alcohol in there to make it slip out a little easier. Thanks and thanks for watching x
Looks good. Seems like the drawers are supposed to be on the bottom.
Thanks so much!
No, they are on the side. You can see the flat bottom on the mold. 2:30
Hi cute mould 😍 love what you done with it, thanks for sharing ❤ xxx
Thanks 🤩
You took quite the trip on the struggle bus with this demold, didn't you. 😂😂
The end results were worth it, though. I love it. Thanks for sharing. ❤
Yes it was! lol. Thanks for watching x
Cute mold thanks for sharing.
Thanks and thanks for watching x
You could stand I flat and make it a tub. Thanks for perceiving ❤
Great idea!! Thanks x
Freaking adorable! Love that mold and the product you designed from it!!!✌️
Thanks so much!!
Cute trinket shelf storage 😊
Thank you! Cheers! x
Very cute❤❤❤ I hate when the pieces are suctioned in so tight, I break out sweating trying to get things out sometimes😂
I thought that was just me who did that lol. I'm sure you will have noticed the extra heavy breathing lol. Thanks for watching x
@WendigovanStudio lol....yeah, I completely understood why as well😉
Well done that is beautiful, love the colour
Thanks 😍
I use a mold release and it works great! Not too expensive either
Great tip!
Looks lovely. Thanks.
Thanks for watching!
This is very sweet Diana. I love ❤ 😍
Thank you 🤩
@@WendigovanStudio you're welcome
New to your channel, this is a very pretty piece and the glitter is just right.
Thanks and welcome
Thanks for the video. Looks very cute. Don’t think I would get the mould but I do love watching the making process
You’re welcome 😊
Spray alcohol in the mold before demolding. It will loosen every area.
Thanks so much!
Love that mold. It turned out great!
Thanks so much!
Keep a spray bottle with a little soap in the water and spray it in your mold. They pop right out
Great idea!! Thanks x
I like the mold very much except for it being such a struggle to demold. I love the colors you chose. The flowers were a good choice. All in all
a pretty project.😊
Thank you! Cheers!
This looks lovely! You sound local, a West Midlands twang to your accent, thank you for sharing ❤
😊 thank you. Yes I am from Birmingham originally but live in South Wales now. x
Oh lovely, I’m from Staffordshire x
Love it! Would some mold release spray have helped?
@@heidih.2465 Thanks and thanks for watching. No, I don't think it would have helped. The main problem I found was that the supports to help prevent it from sagging in where a little chunky, so made it hard to squish the mould in on itself to remove it from the internal sections. Thanks for the suggestion though. x
Wow what a wonderful creation, Ms Dianne😍💖.The cute mini drawers are adorable 😍 ❤️
Thank you so much 🤗
really cute pity mould isn't available anymore xx
Thanks & thanks for watching. Yes I I know, I was shocked when I couldn’t find it anymore. Pretty sure I have seen it on a couple of other sites. I will update the description if I come across it on any of them. x
That would be awesome thank you xx
I found 1 on AliExpress so I’ve added the link for that in the video description x
Ah fantastic thanks very much xx
So super cute 💙 TFS ❣️
Thanks for watching x
What a great mould, nice to see what it looks like in a finished cast - thanks for sharing!
Glad you like it!
What a cool mould.... I am jealous, since I cannot find one of them anywhere (within a decent price). Love how it came out!! ❤❤
Thank you! Cheers!
Lovely mold well done getting them out 🤗
Thanks so much 😊
What a lovely job and the colours are perfect. Thanks for the video I enjoyed that 💖
Thanks so much 😊
Beautiful.
Thank you!
I have the bath mold 😂😂😂😂 ... took 10 minutes to get out. However, even if not fully cured, that is the moment to remove from the mold. Resin goes back to form.
Why are you working in a place that is so cold? I had not seen this mold before. 😊
Wow was thinking about getting that mold. Might give it a miss now lol. Yes I do try demolding when it’s still a little soft however not always easy for me to get back into my studio in time to do so. It’s basically an old shed which we rebuilt during lockdown and as I’m disabled, getting outside to get there can be a little difficult. That’s also why it’s often cold this time of year. My little heater takes a while to warm up the space. But it’s my little getaway from the house place lol. Can you tell I don’t get out much pmsl 🤪 x
I have this mold. Not attenpted it yet along with many others lol 😂 Another amazing make Diane. Well done and hope you are well? ❤
Thank you! You too! Don’t forget to place something along the straight edge on the base of the main mold so you don’t get a wonky base. Also yes, I know the feeling about many others to try lol. x
@WendigovanStudio I will do thanks for the tip much appreciated. Haha, I went on a temu rampage last year and got so many, and some have been done too many times. But hey, they are great to start out with and put our twists on them.. look forward to your next upload x
Very pretty❤❤❤
Thank you! Cheers!
Beautiful
Thank you! Cheers!
Hi. Great work. Im trying to find that mold, but it's not coming up.
Thanks and thanks for watching. there's a link in the description box below for the mould. There's a 3 draw version there too. x
It is very cute❤
Thanks so much. Glad you like it x
Any chance you could share the link for where you found this mold I can find it TY
Thanks for watching. Sadly it’s no longer listed on Amazon where I bought it. It’s completely vanished. But I’ve seen it on another site but still trying to find where it was. As soon as I find it, I’ll share it. X
I found 1 on AliExpress so I’ve added the link for that in the video description x
Cute❤
Thanks so much!
Did you make your pigment paste? It looks odd. You can spray soapy water 🧼 into your molds after they are cured, and they will un-mold much easier. Craziest mold 🤪 I have ever seen. You can't even use the top drawer and not much will fit in the other drawer.
Thanks for watching. No the pigment was a prepaid 1 which I got some time ago. It might look a little odd due to it being a chameleon pigment. I think I needed to add more than I did to get the true effect. I keep forgetting to bring a bottle of soapy water out to the studio, but it will be on my list. Yes the mold is crazy but I think it’s more as a display piece rather than a fully functional unit. x
Spray some alcohol on the insides, that helps to loosen the grip.
Thanks for watching. I did for the drawers but for some reason my brain thought it would be funnier if I just struggled lol. Will for sure be using it for the shelf unit in future too x
Hello my lovely. I love this pot!! I know how you feel with trying to demold with painful hands!! I have Fibromyalgia and run my channel 'HomemadeMiraclesUK' doing crafting, mainly resin. It's mental trying to unmold some of those things we torture ourselves doing 😂. Xxx
Hiya, welcome and hello fellow fibro warrior. Yes it is torture but I am sure you know that if we didn't , we wound be in a very sad place in our minds. Thanks for watching and I also subscribe to you too xx
@WendigovanStudio aww thank you huni. My name is Lori. It's nice to see another UK crafter on YT, most are from US! Looking forward to watching more of your videos. Xx