Hello, I really enjoyed the video and your precise explanations. I did what you said and it still takes a minute and a half for the drone to activate (aircraft warming up) , is there any way to shorten it ? Thanks
Very good video. Thanks for your indications. In my case, the app instruced me to change the drone positions, during the calibration, so that it could learn front, back, left and right. Other then that, it was a "smoth ride". Cheers!
What about the VPS calibration on your P4? I have problems with this "calibration failed" messages all the time.. Some people said is some monitors issue..
Thanks so much for the very helpful video and the detailed information that you provided. Very helpful. I notice that my camera seems to very slowly rotate to the right. Example: I lift off to about 30 ft, rotate the camera to the right just a little to look at something, but when I let on all of the controls, the camera image seems to drift to the right? Any thoughts? Have you seen this before? I am new with this Phantom 4, just had it two days and I didn't notice this yesterday. I don't believe it is the wind. I tested it at various locations and times. Again, just a slight drift of the video image that is consistent to the right only. Thanks again for your videos.
Hi Mad Rc . I live in Thailand. Can I do this IMU Cal indoors, in an air-con room? Great video by the way. The audio and video was super clear...as was your instructions. Cheers
Mad RC I used to work on commercial aircraft IMUs. Delco Carousel IV. 40lbs of precision gyros, accelerometers, gimbals and 80's electronics. Amazing how they've miniaturized.
Hi, so I noticed that my Brand New Phantom 4 PRO started making buzzing sound andthe camera won't tilt up and down anymore. It stays pointing down...so I tried, still trying to calibrate the IMU, but it's taking longer than it should...It is in front of the AC so it's cool. I'm worried that I will have to return this. UGH.
Amigo necesito ayuda llevo días tratando de calibrar el phantom 4 del imu pero ya hice todo lo que dices pero me sigue un erro 13 no se que sea pero ya me desespere
PLEASE HELP! The IMU 2 is failing everytime! I get a error. The IMU 1 is always 100% but the IMU 2 will stop and go back to 0% after it reach 30% Please help!!!!!!
How far should gimbal turn left to right
Great video. Very informative and easy to follow.
Spot on mate. Thanks
Great tips! Thank you so much. I was worrying with the constantly errors. Thnks!
Thanks
This video solved my problem....thank you
Thanks that fantastic :)
Hello, I really enjoyed the video and your precise explanations.
I did what you said and it still takes a minute and a half for the drone to activate (aircraft warming up) , is there any way to shorten it ? Thanks
Wow it is cool video. Thank you. You helped me to solve the problem with IMU
I just used a fan worked great!
Very good video. Thanks for your indications. In my case, the app instruced me to change the drone positions, during the calibration, so that it could learn front, back, left and right. Other then that, it was a "smoth ride". Cheers!
Thanks
Thanks very much for the information
Great video. How often do u recommend doin this?
What about the VPS calibration on your P4? I have problems with this "calibration failed" messages all the time.. Some people said is some monitors issue..
Tends to be the resolution and size of monitor, have you tried it on a laptop with its screen at native resolution, also sub 15" seems to work better.
many thanks
Thanks so much for the very helpful video and the detailed information that you provided. Very helpful. I notice that my camera seems to very slowly rotate to the right. Example: I lift off to about 30 ft, rotate the camera to the right just a little to look at something, but when I let on all of the controls, the camera image seems to drift to the right? Any thoughts? Have you seen this before? I am new with this Phantom 4, just had it two days and I didn't notice this yesterday. I don't believe it is the wind. I tested it at various locations and times. Again, just a slight drift of the video image that is consistent to the right only. Thanks again for your videos.
Hi Mad Rc . I live in Thailand. Can I do this IMU Cal indoors, in an air-con room? Great video by the way. The audio and video was super clear...as was your instructions. Cheers
that holder for the ipad i see a split under the bottom can i use my galaxy tab the plug is under the bottom i see a split where you can run my cord
Good video. Inertial Measurement Unit.
Thanks Yea i know, brains says one thing and moth says something else. Appreciate the feedback
Mad RC I used to work on commercial aircraft IMUs. Delco Carousel IV. 40lbs of precision gyros, accelerometers, gimbals and 80's electronics. Amazing how they've miniaturized.
It is, all this started with the original iPhone, whilst things were going on before that Apple pushed sensors into the phone, 2007 was a big shift.
hey..do i need to the im calibration every time im gone fly it..?
gunnar dalen no
Hi Mad, Good informative vid. Btw, what model is that iPad you're using?
.
Mini 2 mostly but have the new iPhone 7Plus and its awesome in the holder :) iPad Mini 4 is by far best option though.
Great advice. (BTW IMU is inertial measurement unit, not intergrated MU)
Yea I was thinking one things and saying something else. That’s a LONG time ago now.
Hi, so I noticed that my Brand New Phantom 4 PRO started making buzzing sound andthe camera won't tilt up and down anymore. It stays pointing down...so I tried, still trying to calibrate the IMU, but it's taking longer than it should...It is in front of the AC so it's cool. I'm worried that I will have to return this. UGH.
Amigo necesito ayuda llevo días tratando de calibrar el phantom 4 del imu pero ya hice todo lo que dices pero me sigue un erro 13 no se que sea pero ya me desespere
My P4 gimbal won't pan up or down.
PLEASE HELP! The IMU 2 is failing everytime! I get a error. The IMU 1 is always 100% but the IMU 2 will stop and go back to 0% after it reach 30% Please help!!!!!!
Replace bugs3 motor
stuck for 10 minutes on gimbal calibrate , now what?
did not help me still not level
you talk too much!!!!!!!!!!!
Appreciate the feedback thanks for watching.