damn, I've got a taranis qx7 acces and D8 isnt there, the video you link doesn't use a qx7 so the binding is different... Can you help me? I'm trying to but I don't know what am doing wrong and dunno where to start again... thanks man
Thanks! This is really helpful and straight to the point. Loving the minimal look of your video and it gives a fresh look to your tutorial compared to the other cluttered tutorials regarding binding. Would love a tutorial on how to bind goggles with the drone! Keep it up man!
Have the Tinyhawk 1 and just ordered the Tinyhawk Freestyle. Time for a new radio. Thank you. Don't have Freestyle or the Taranis qx9 lite (the one I'm leaning towards this hour). I am new to FPV but am already obsessed. Watching and learning. Fun is! Thanks for this and the next, which I plan to watch now.
Did my research on QX7. I like. Question: Do I need the XJT Lite module to connect to my growing Tinyhawk family? Also - If I get into this, do you recommend the M7 Hall Sensor Gimbal as an upgrade in the future?
John Pellico I just bought the stock one and it works will all my tiny hawks no extra modules or software. As for the sensor gimbal I’m not to sure about that I’m using it as is right now for a 5” racing and 3” cinewhoop
@@TheGregFarnum Thanks for the nearly instantaneous response! That what I was hoping. From what I could tell, the newer FrSky radios stopped supporting D8, so now they need the XJT Lite Module to connect. Again - really appreciate the info - I'm learning every day.
Might wanna add the new access models wont work on d8 receivers unless you change it to the frsky xm, xm+, or archer m+ receiver... currently running the xm upgrading to the archer m+ for ota, fport and double the range almost 4x more than stock. 🤷♂️
Hej good totorial! I waiting for my eachine nano longrange. You know that one Witherspoon like one li-lion battery. And I would appruciate a totorial or maybe some tips on how i connect it to my qx7. Ive been looking at my armattan rooster for almost 5 years because im all new to quads. Mostly been flying airplanes since that time when you hade like a chip/crystal in the controller and another one in The resiver. Im eager to start flying as soon as my eachine nano longrange is arriving. If found a lotta of good totorials and Would say i understand betaflight. Love your vids. Best regards Hampus (From sweden) haha Thanks for a Great vid!
I have the same taranis but i dont have a module in the back, like above the battery there is another socket with pins. the eachine rtf kit has its own radio but id like to use my taranis. It seems to be d8 protocol on the quad. Which module do i have to buy and stick it in the back of the taranis¿
I don't have a D8 option for internal rf. Options are 'Off' 'Access' 'Accesss D16', neither Access seems to bind with the steps mentioned.. (Running OpenTX 2.3.5)
@@DerHeigl Found this video for taranis since they no longer support D8. Basically you'll need to open up betaflight under configuration and set the sp bus to FRYSKY_X: th-cam.com/video/mDBoXLGjqS4/w-d-xo.html
I have 2 questions: Does this also works with emax tinyhawk 2 freestyle? Do you need a taranis reciever put in the drone to connect with the controller, or the one which was set when you bought the drone?
Is there a simulator to practice flying the tinyhawk with the taranus on the computer? I have been flying regular drones for years. DJI Phantom 3P and Yuneec Typhoon are my go to. I have never flown a FPV racing style though.
Hey just got the qx7 got everything binded (I think). When I push the bind again on the radio the quad starts beeping like it's getting ready to arm? Do I just need to set the tx up right in betaflight?
Excellent video as usual... !!! I need some help please !!! I have an eflite viper 70 mm edf and I bind my Taranis QX7 with Spektrum Rx AR636A AS3X using the JP4IN1 Jumper Multiprotocol Module....... everything is working good, but I don't know how to make the Safe works, how can I assign a switch to enable or unable that option?..... I'll appreciate any help... thank you....
Hey Greg or anyone I need help. Total new guy trying to do what you did in the video. I tried before and thought the button on top of the stack by the USB was the bind button but I think it's the vtx or something but I was following directions for binding using that button and now I cant get it bind. Not saying that messing with the other button is the problem but I dont know. When I followed your instructions and after the steps to bind the red LEDs are still flashing and the blue is solid..hahahahaha I've been trying for awhile now. It's all new to me! If you can help that would be really cool. Thanks
His videos are amazing. Not only in quality but also in explaining everything. Deserves way my subs! Keep up the great work! Can’t wait to start flying FPV drones!
I have a Tiny Hawk 2 and an FRsky QX7 that came with an Access receiver thing on the back. In my mode menu options I have, OFF, ACCESS and ACCST D16. Im having trouble pairing. Will this not work with the Tiny HAWK?
Hey there everything works fine, exept the throttle. Motors are not responding to throttle. All other signals work fine (ail, etc. are getting the motors spinning). Maybe you have an idea on how to fix this?
Tinyhawk 2 doesn't bind to the new x7! Unfortunately, the new transmitters come with 2019 Access, which do not include D8 mode, and render the new X7 unable to bind Tiny2. I'm searching endlessly for how to put D8 onto the new X7, to no avail. Any help?
I was trying that and it looked like it was bound but the tinyhawk didn't react. Thought i was going crazy until i realized that usb_hid_cdc was still enabled LMAO. So keep in mind that you have to disable that if it's enabled or your drone won't work obviously
Didn't work for me. Now my Tiny hawk is beeping at me constantly lol. And it's no longer bound to the eMax controller. My Mode has "XJT D8" next to it though.
So..... I got a tinyhawk s and the frsky x lite reciever, I've tried binding it that way and for some reason it doesn't bind. Does anyone know what I'm doing wrong or what I missed.
@@Hyrsch Thank you for the reply, I ended up figuring it out about 10 min after I posted this. What happened was I forgot to save my settings for the x lite so there was no movement until I saved my controller settings lol
@@brennanhanson4617 Also for this last reply 6 months ago, I was talking about in betaflight you set your buttons up for the controller and then save it and the save button is bottom right of betaflight program
I'm pretty sure you have to put the inputs in both of the settings on the taranis. That's how it is for the x lite, I dont have my controller right now but when I get home later tonight I can see it and tell you exactly where the inputs go and what they are.
Does anyone know if d16 has less or more range. I finally got my tinyhawk 2 to work but it has absolute crap range. Maybe 100ft. I was only able to bind with d16. My taranis X7 access doesn't have d8.
I also have access. Just bought the XJT to bind in d8 and working on that now. I bought it because my range was also garbage. Will let you know if I can figure out how to get it to bind lol
If you don't have D8 Mode try this method to Bind in D16 th-cam.com/video/mDBoXLGjqS4/w-d-xo.html&t=
How do i bind my beta 75 lite D8 to my taranis qx7? My beta 75 lite s has no usb input on it.. i need help
Can we update the firmware of taranis qx7 and add D8 mode in the updates?
Would it work fine with d16 mode i mean lile range or is better on d8 mode?
damn, I've got a taranis qx7 acces and D8 isnt there, the video you link doesn't use a qx7 so the binding is different... Can you help me? I'm trying to but I don't know what am doing wrong and dunno where to start again... thanks man
Thanks! This is really helpful and straight to the point. Loving the minimal look of your video and it gives a fresh look to your tutorial compared to the other cluttered tutorials regarding binding. Would love a tutorial on how to bind goggles with the drone! Keep it up man!
Getting back into my own videos so more should be coming soon!
This man makes such quality videos
Have the Tinyhawk 1 and just ordered the Tinyhawk Freestyle. Time for a new radio. Thank you. Don't have Freestyle or the Taranis qx9 lite (the one I'm leaning towards this hour). I am new to FPV but am already obsessed. Watching and learning. Fun is! Thanks for this and the next, which I plan to watch now.
I love the qX7 and is definitely the way to go in my opinion if you ever plan on doing bigger 3 and 5” quads
Did my research on QX7. I like. Question: Do I need the XJT Lite module to connect to my growing Tinyhawk family? Also - If I get into this, do you recommend the M7 Hall Sensor Gimbal as an upgrade in the future?
John Pellico I just bought the stock one and it works will all my tiny hawks no extra modules or software. As for the sensor gimbal I’m not to sure about that I’m using it as is right now for a 5” racing and 3” cinewhoop
@@TheGregFarnum Thanks for the nearly instantaneous response! That what I was hoping. From what I could tell, the newer FrSky radios stopped supporting D8, so now they need the XJT Lite Module to connect. Again - really appreciate the info - I'm learning every day.
@@ShorePelican55 th-cam.com/video/mDBoXLGjqS4/w-d-xo.html&t=
this is a way to do it without the module in D16 mode
Might wanna add the new access models wont work on d8 receivers unless you change it to the frsky xm, xm+, or archer m+ receiver... currently running the xm upgrading to the archer m+ for ota, fport and double the range almost 4x more than stock. 🤷♂️
Super good quality tutorial, thanks 🤙🏼
Thanks! Just put up another one on setting up switches!
thanks dude....im search for connect transmitter to fpv so long.....and you help me Alhamdulillah......✊✊✊🇵🇸🇵🇸🇵🇸
Just bought a tiny hawk! Thank you for this tutorial!
You bet just put up the next one on how to set up switches!
Hey can you use this with the tinyhawk Freestyle?
Hej good totorial! I waiting for my eachine nano longrange. You know that one Witherspoon like one li-lion battery. And I would appruciate a totorial or maybe some tips on how i connect it to my qx7.
Ive been looking at my armattan rooster for almost 5 years because im all new to quads. Mostly been flying airplanes since that time when you hade like a chip/crystal in the controller and another one in The resiver.
Im eager to start flying as soon as my eachine nano longrange is arriving. If found a lotta of good totorials and Would say i understand betaflight.
Love your vids.
Best regards
Hampus
(From sweden) haha
Thanks for a Great vid!
I have the same taranis but i dont have a module in the back, like above the battery there is another socket with pins. the eachine rtf kit has its own radio but id like to use my taranis. It seems to be d8 protocol on the quad. Which module do i have to buy and stick it in the back of the taranis¿
Easy way to press bind button is don’t put battery in the compartment. You can press the frame up and it presses the button in perfect
Great Tip
Can i bind this controller to a tinyhawk 2 freestyle?
Yea you can they have the same receiver
Hey man. My Taranis isn't doing this chirping sound after pressing the bind button. What could cause that?
Extremely helpful! Thanks so much
to connect the goggles do Fat Shark Attitude V6 work aswell?
I don't have a D8 option for internal rf. Options are 'Off' 'Access' 'Accesss D16', neither Access seems to bind with the steps mentioned.. (Running OpenTX 2.3.5)
same
@@DerHeigl Found this video for taranis since they no longer support D8. Basically you'll need to open up betaflight under configuration and set the sp bus to FRYSKY_X: th-cam.com/video/mDBoXLGjqS4/w-d-xo.html
I have 2 questions:
Does this also works with emax tinyhawk 2 freestyle?
Do you need a taranis reciever put in the drone to connect with the controller, or the one which was set when you bought the drone?
Is there a simulator to practice flying the tinyhawk with the taranus on the computer? I have been flying regular drones for years. DJI Phantom 3P and Yuneec Typhoon are my go to. I have never flown a FPV racing style though.
Hey just got the qx7 got everything binded (I think). When I push the bind again on the radio the quad starts beeping like it's getting ready to arm? Do I just need to set the tx up right in betaflight?
My frisky Q x7 dose not have D8 as an option. Only access and D16
Any tips?
Excellent video as usual...
!!! I need some help please !!! I have an eflite viper 70 mm edf and I bind my Taranis QX7 with Spektrum Rx AR636A AS3X using the JP4IN1 Jumper Multiprotocol Module....... everything is working good, but I don't know how to make the Safe works, how can I assign a switch to enable or unable that option?..... I'll appreciate any help... thank you....
Hey Greg or anyone I need help. Total new guy trying to do what you did in the video. I tried before and thought the button on top of the stack by the USB was the bind button but I think it's the vtx or something but I was following directions for binding using that button and now I cant get it bind. Not saying that messing with the other button is the problem but I dont know. When I followed your instructions and after the steps to bind the red LEDs are still flashing and the blue is solid..hahahahaha I've been trying for awhile now. It's all new to me! If you can help that would be really cool. Thanks
Hey hopefully you got this solved already but if not shoot me a message on Instagram I am faster at responding on there
I Just bought an Taranis qx7, and on my modes show "XJT D16" or "XJT D8" instead of only "D16 or D18" can u help me?
His videos are amazing. Not only in quality but also in explaining everything. Deserves way my subs! Keep up the great work! Can’t wait to start flying FPV drones!
Thanks!
is there a difference between a FRSKY drone receiver and a SPI FRSKY?
I have a Tiny Hawk 2 and an FRsky QX7 that came with an Access receiver thing on the back. In my mode menu options I have, OFF, ACCESS and ACCST D16. Im having trouble pairing. Will this not work with the Tiny HAWK?
I have the same problem
Try this th-cam.com/video/mDBoXLGjqS4/w-d-xo.html
Same problem here with my TinyHawk 2.
Thank you! It worked
I'M finding for this tutorial thanks!
Thank you!
Do i have to buy D8 or D16 transmitter for the controller?
@@nothingdude6760 it runs off D8 but can work if you have a D16
Hey there everything works fine, exept the throttle. Motors are not responding to throttle. All other signals work fine (ail, etc. are getting the motors spinning). Maybe you have an idea on how to fix this?
Hmm thats an interesting problem. In betaflight under the reciver tab when you have it all powered on are you seeing the throttle control?
Video của bạn rất hữu ích mong bạn ra nhiều video ráp fpv
Can u plz do it for flysky i6..
Tinyhawk 2 doesn't bind to the new x7! Unfortunately, the new transmitters come with 2019 Access, which do not include D8 mode, and render the new X7 unable to bind Tiny2. I'm searching endlessly for how to put D8 onto the new X7, to no avail. Any help?
It is possible to bind the tinyhawk 2 in d16 mode it just needs a setting change in betaflight.
th-cam.com/video/mDBoXLGjqS4/w-d-xo.html&t= try this
Did you have to buy the module
Will this still work in 2024, I'm looking for a radio with D8
can i bind this trans to a rodeo 150?
Why is it when I go into mode it says XJT D8. I can't get rid of the XJT? Any help would be awesome
Does this also work with custom drones ?
Can you bind it with the QX7 on D-16 mode ?
i'd like to know the same... my qx7 acces doesn't have D8 and i'm struggling hard...
Great Video Thanks
Glad you enjoyed it
Hi, please help! I have a Tinyhawk s and it won’t bind to my qx7. I’m only getting a flashing red light. Any ideas what it could be?
Same here . Im trying to figure that part out lol
I was trying that and it looked like it was bound but the tinyhawk didn't react. Thought i was going crazy until i realized that usb_hid_cdc was still enabled LMAO. So keep in mind that you have to disable that if it's enabled or your drone won't work obviously
Didn't work for me. Now my Tiny hawk is beeping at me constantly lol. And it's no longer bound to the eMax controller. My Mode has "XJT D8" next to it though.
I have the same problem
Ok I figured it out ... I was changing exterior Rf and I should have been in interior rf
But the throttle and roll is all messed up
@@qweasdzxc363 Use Betaflight to verify that your TX is set up right. There is no other way.
@@qweasdzxc363 Use Betaflight to match the radio settings to the model
How do I bind my 5 inch drone
On my internal RF, it doesn't let me change to D8, does anyone have any ideas?
Does it works with the tiny hawk freestyle?
It should be a similar process!
New to rc. Can I bind this to my flysky fsi6 radio?
Noooooooo you got the wrong protocol transmitter. To bind this quad you must buy a fr sky protocol transmitter.
@@orechris21 thanks for the warning a year after I bought this hhahahahahahaha I figured it out
@@karlhess7278 hahaha I am sorry but better later than never
@@karlhess7278 sometimes you gotta learn things the hard way I guess
Hello~I'm korean~
I bought an x7 remote controller after watching your video.
Is there a simulator cable in your x7 remote controller set?
No its the same cable u would use to charge a ps3 controller
Is the method different for the tinyhawk 2 race? I can’t seem to get it to bind.
I think that would be because you don’t have d8 mode
did you not have to do anything in betaflight for binding
Nope just need betaflight to set up switches.
So..... I got a tinyhawk s and the frsky x lite reciever, I've tried binding it that way and for some reason it doesn't bind. Does anyone know what I'm doing wrong or what I missed.
Try to put the newest firmware on the frsky. Did help me. Also when in europe, it might help to switch the frsky to non-eu mode.
@@Hyrsch Thank you for the reply, I ended up figuring it out about 10 min after I posted this. What happened was I forgot to save my settings for the x lite so there was no movement until I saved my controller settings lol
@@Hyrsch Once I set the controller up properly it bonded no problem and now I dont have to bind it to the controller anymore lol
@@brentrickert9400 how do you save it
@@brennanhanson4617 Also for this last reply 6 months ago, I was talking about in betaflight you set your buttons up for the controller and then save it and the save button is bottom right of betaflight program
how do i pair my googles to it?
Thanks 👍 🤗
Does the same thing work for the emax freestyle?
it should
Dude i use secondhand tiny hawk. I did like your tutorial but cant bind, any advise ?
are you using the same radio?
I solve it by change config in betaflight thanks bro
@@vergil9397 awesome glad you got it worked out!
How do I save my settings on my fr sky taranis?
I'm pretty sure you have to put the inputs in both of the settings on the taranis. That's how it is for the x lite, I dont have my controller right now but when I get home later tonight I can see it and tell you exactly where the inputs go and what they are.
Does anyone know if d16 has less or more range. I finally got my tinyhawk 2 to work but it has absolute crap range. Maybe 100ft. I was only able to bind with d16. My taranis X7 access doesn't have d8.
Is it the VTX Range or actual flight range where you lose control?
@@TheGregFarnumonce I lose video the quad drops. So I take it both.
I also have access. Just bought the XJT to bind in d8 and working on that now. I bought it because my range was also garbage. Will let you know if I can figure out how to get it to bind lol
@@GarrettDespainVlog Did you ever figure it out? I also have the access and the tutorials for the old models to get D8 don't work.
So the QX7 just has D8 now or you downloaded it off of OpenTX?
It comes on it already
Whats next after I bind it beta flight ?
It’s going to be setting up switches I’m finishing that video now
Shoot me a message on Instagram and I can send you a text instructions of what to do
th-cam.com/video/sZ_rFqVEFAw/w-d-xo.html
I do like you say but the arm not working way I am so sad I have tinyhawk2
Mine doesn’t have a D8 mode help plz
Its possible to do it in d16 just need to change some other settings
@@TheGregFarnum ive been trying :( would i need to have external RF on?
Can I bind a DX6 with the tiny hawk ?
You should be able to
@@TheGregFarnum I could not bind it. If you can help I would be eternaly grateful and cancel the order for an additional tx I don't need
@@Vrago-787 I don't know Spektrum that radio to well so I can't really give you instructions on how to 'sorry
My taranis hasn’t D8 only D16.... what can i do?
just change it from ch1-16 to ch1-8 should be right under where it says D16
Greg i flashed it with non eu version and now everything is fine
@@davenow1017 tried flashing mine but maybe I'm doing something wrong. Any tips?
why does my receiver not have d-8? its the exact same one. i only have D-16 and LR12? WTF
Hmm that’s odd maybe reach out to frsky
@@TheGregFarnum I found out that it's a EU thing
@@dutchkillzgamingchannel476 and how i can fix it
Man I can't get my whoop to bind and fly for the life of me
I can't bind my Tinyhawk 2 to QX7 either.
I tried to keep up with you " just wondering is your house on fire " to damm fast
Bought a frysky radio instead of frsky ahhahahahah
o noooo hahah
2024 - doesnt work anymore
does this work with the tinyhawk 2 freestyle ?
Thanks!