Toyota Avensis Estate Rear Brake Light Bulbs Replacement
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- If you are interested in importing and exporting cars see here...
bit.ly/35Ts5QK
How to replace the brake light bulbs on a Toyota Avensis Estate Car.
There are some slightly difficult clips, use a torch or flashlight to see the bulb holder.
Thank you so much. The struggle is teal here :)
Happy to help!
Very difficult to change these bulbs. I came up with a idea after trying for a long time. I cut the plastic lid from a silicone spray bottle into the right size to hold the clip springs 'in' on the lower pair so I could then use my hands on the upper pair of springs and pull the bulb holder out. Hope that helps someone out there.
Excellent idea!
I used a knife and cut out a bit of the inner lining/wall that was blocking access to the light. Just a small piece that I cut which was not visible once you put the lid back on.
A lot easier to access and work with now.
My plan exactly. Bless you and thanks for the support. :)
I ended up cutting the Panel behind the bulb cluster to gain access to the bulb holder . Used a scalpel to give a neat cut so as to be able to refit the panel without the cut being too obvious. So much easier. It's a pity the clown that designed this didn't think it through or try to fit a bulb himself.
I bet you that same clown designed the places for the fuses and relays. I changed the blinkers relay it was like heart surgery practically.
Whoever designed this deserves a special place in hell. Thanks for the vid though.
Yes, your neck will hurt doing this/ Please SUBSCRIBE! :)
I have the same car, and everything whats about replacing the bulbs is worst nightmare.
Ты прям спас меня! 😊
Thank you
You are welcome, please subscribe?
Great info! Thanks.
Glad it was helpful!
Brilliant thanks 😎
Thanks mate
Thank you so much. x x x.
No worries 🙂☺️
Thanks :)
Danke
Thank you for the video.
You are welcome, please subscribe :)
Thanks!
Thanks! Please subscribe? Have a Great Day!
@@scotscaspian yes sir!
How do you remove the whole tail light assembly? How many bolts/nuts are used for mounting? Namely, I guess you better remove the whole light to get access to the bulbs. Access from the trunk is practically impossible.
No, it doesn't work like that. In the video, the (black) part that holds the bulbs was already removed, but the removal was not shown. There's a reason for that: The named part is almost impossible to remove. There's no visibility, and your hand barely fits in the "maintenance opening" - you're supposed to remove it blindly. The design of the part is terrible. The clips (4 pcs) should be bent to unlock them, but the bending arms are so flexible that they just flex and don't open the clips.
After you've somehow managed to open the clips (most probably by breaking something, I broke 3 clips from one side and 2 from the other), there's nothing you could grip in order to pull the part out. I have no idea, how come the part in the video was unbroken. I think the guy had removed the complete light assembly before removing the part...
Finally, when you pull the part back, there are absolutely no guides but you will have to fight with the part. I consider myself a semi-experienced "car DYI guy" and I've replaced multiple tail bulbs from T25 Estate. Still, it's terrible fighting with it, every time! Horrible engineering by Toyota!
Do you know how to remove the chrome trim under the rear brake light?
I think it is part of the body work.