I rechambered my Mauser back in the 60’s to 8mm/06 and made a fine sport rifle out of it. We turned down the barrel and removed the sights then altered the bolt to accept a scope put in an adjustable trigger and had a Myrtlewood stock made for it. Shoots great.
@miketychewicz that sounds alot like my 1938 Persian Mauser. Somebody took great care and surely considerable expense to convert it. 29" barrel shortened to 24 3/4" and recrowned. 2 position safety and turned down bolt. Redfield bases, rechambered and custom made tiger maple with rosewood endcap Monte Carlo stock. Good thing they also installed a good butt pad because it kicks. I took my second deer this fall with it, but my loads are really built for moose and elk. Hopefully next fall I can test it on something bigger. Cheers.
Hey boys, thanks for giving a little respect to the old 8mm 06! I picked one up recently for $375.00 Canadian. It's a beauty. Some old guy sporterized it back in the 50's. Tiger maple stock with rosewood caps, nicely turned down bolt, modified safety, already had a Redfield base mounted. Been working up some loads and I can't wait to get out to the range. 200 grain Nosler Accubonds. Continued: Well I got the old 8mm-06 down to the range, and it shoots great. With 56 grains of 4350 it makes nice patterns at 100 and 200 yards.
Got my first whitetail with my 8mm06 the other day. Just above the shoulder, through the spine. No damage to the back strap, heart or liver. Flat out to 220 yards.
That is some very cool content you guys create. We have some interesting 8mm catridges here in Europe like 8x60S, a 8mm Mauser lenghtened to get around the Versailles treaty or the 8x64S, made prior to WWI, very similar to 8mm06 but more powerful and the magnum 8x68S, from 1938, same powerlevel as the excellent .300 Wby. Weidmannsheil form Germany!
Shot my first elk with an 8mm-06 180 grain ballistic tip. Phenomenal cartridge if you ask me. Glad you chose to go outside the box and talk about this cartridge. I still have it and it has the nazi stamp on the barrel
I own a full custom build to 8mm -06 . I chose it based off of a build I wanted to duplicate from an 1957 article. Now that there are great projectiles from Nosler and Hornady it really performs across the board.
I actually found a box of 8mm-06 in my grandfather's ammo cabinet recently and was looking for more information on it. Good stuff guys! Love the podcast!
👋🏼(SuggesTion Below to Consider) I’m glad to see this caliber discussed today, especially bc I just won bidding on a finely customized Mauser chambered on the 338-06 A-Square, instead of the 8mm-06. I chose this chambering to fit between my goto 270 Win and my only Magnum, the 375 H&H. This caliber fits perfectly in between the capabilities in the my bookend calibers when you consider bullet grain weight that each cartridge is best efficiently at 2850-3000fps. Please consider to touch base on this chambering even if it’s not on it own. 🤔 Such as a topic discussing very efficient and effective NON-Magnum rounds. 🙏
The 8mm-06 was a great game getter, but there was more to making one than running the reamer in. If you did that you would have an inaccurate rifle, you really needed to set the threads back and reface the barrel before reaming. The problem is the 8x57 neck in military rifles is large enough to create an extra shoulder on the 8mm-06. Two big issues have plagued the 8mm for all these years: First, there are two different bullet diameters associated with German rifles .323 and .320 and that's not the end of it, other countries call .329 diameter 8mm. The other problem has been bullet availability. You could find two bullet weights in .323, a 170 round nose and a 175 spitzer. Then, just before the 8mm Rem. mag came out a 123 grain spitzer bullet came out, followed by a 220 grain spitzer and then the Remington round came out and a 180 grain bullet became available. These last two were a little tough for any non-magnum velocities, but if you needed penetration they were the ticket. Great discussion, glad to see the 8mm-06 cartridge mentioned, In some ways it was the most underrated hunting wildcat ever developed.
When I was little I was given a second edition Sierra bullet loading manual and I remember flipping through it and finding the 8mm odd 6 and thinking that was the coolest thing ever. I still want one 🤘😂
You all missed out on the best part. Mr. Ackley wildcatted this wildcat, That 200 grain Acubond will do close to 3100 fps and higher BC than the 338. On the 7mm Mauser case head and 200 grain bullet, the 8mm AI (or somebody else's improvement, thank you Mr. Rocky) is the one to beat.
I have 06s & 308s, I own several 8mms . In my opinion it outperformed 06 and my 308 in hunting. And I also love here loading for it I am thinking about chambering one in 8-06, I believe it will be a blast to handload for.
I just inherited an fn mauser that was converted to 8mm-06 from my grandfather. My dad and I didn't know what it was because my grandfather never brought it out, we always shot shotguns bird hunting with him. I'm slowly getting the reloading stuff now.
I was around gun shops for the "hot stove league" of cartridge discussions in the 1970's as my grandfather was an avid player. The 8mm was really held back by the American confusion with anything metric, and also the .318 vs .323 mess. The Germans switched the bore diameter (way before the World Wars in 1905) but that didn't stop people saying there were two 8mm calibers floating around and if you ID'ed your bore wrong you would kill yourself with an 8mm. It cursed the 8mm in America!
8mm-06 was a wild cat developed after WWII. Wilhelm Breneke developed the 8x64 in 1912 offered it to the German military they said no thanks and he released it on the commercial market for hunting. It was popular prior to WWII and after and still is in Europe the Czechs still load it. I've owned 1 CZ VG47 bolt action hunting rifle in 8x64 and its a hammer on wild boar.
Best podcast bar none! My suggestion is still some more big bore. 577 nitro, 577 t Rex, 505 Gibbs, 470 nitro, 460 a square short. So many more, absolutely love big bores!
having one made now on a winchester action,, ,, it will be what i use on elk next year,,lots of good bullets,,,,,and good power and range,,,,8mm-06 needs to be known more,,thanks for doing this video,,,,,,
This talk brings to mind the 8MM Remington Mag. Do it if you don’t mind...Maybe you could do it as part of great cartridges that faded. The 264 Win Mag could be included.
6.5&350 rm, 6mm rem,358 win, 264 wm, 358 norma, 8mm rm, 325 wsm, 338 rcm, 7mm & 300 saum, 9.3x64, and 366 sako mag should be on your wish episode. All rounds that should have large cults following,
You should piggy back off this into the old 8mm Poor Man's Magnum. It's an 8mm mauser rechambered to accept an necked down 338win mag to 8mm for mauser rifles.
So, considering this modifies a German Mauser, if one were to find one of these for sale does it take away from the Mauser’s value or add to it (since 30-06 brass and more 8mm bullets are available)?
Also, 8mm Mauser ammo is more expensive then 30.06 so cost wise if I buy 30.06 and load them to 8mm-06 that is the better way to go IMO. You typically would want brand new cases for necking up to the 8mm-06.
I have a 33806 it's an awesome gun we have taken lots of deer with it. It's a deadly truck gun and awesome in the boat moose hunting. It's a howa 1500 that started as a 3006 and I had it re barreled to 33806 a square. 25 inch barrel which is a sweet length for it with a 11 degree target crown on a heavy sporter contour like #2. I run 225 gr TSX,s out of some lapua 3006 brass. Man the gun shoots great.
You see this in old Speer reloading books. I remember this old 8mm-06. There was another conversion on Mausers called the 8mm PMM (poor man's magnum). It was basically an neckedndown 338 win mag case to 8mm.
@@borkwoof696 Here is a worthwhile video to watch, and though I can't confirm anything he says, it makes a lot of sense. th-cam.com/video/2rT7DpXyxfw/w-d-xo.html But honestly, in modern times, when all 270 brass is virgin and not formed from something else, it doesn't matter.
7mm-08 is close. More importantly, much better, and on the shelves. Think like a salmon and fight upstream, or like a dolphin and ride the bow wave ...
I have one built on a Mauser 98. It has freebore and it is powerful but doesn't kick too much. 21 inch barrel. synthetic stock. Shoots the 175 grain Sierra Pro Hunter at about 3,000 fps. I put a .5 inch freebore so it reduces the pressure from hot loads. One hole groups with H380! Puts a deer down RIGHT NOW!
…you seem to refer to the 8mm Mauser , presume you talking about the 8x57JS!? Hear in Europe this caliber is very popular still….probably behind the 30-06, 9,3x62 if we talk about European Moose hunting. It would be cool if you could do a comparison between the 8mm06, 8x57JS and maybe the 8x68s!! 👍
My Dad showed up one day with an 8mm Mauser that he bought in Nevada. It was made in about 1938 by the Czecholslovakian company that makes the modern CZ firearms made today. I thought about rechambering to 8mm06 but the gun has so much sentimental value because it was given to me by my Dad. I need to buy some modern 8mm Mauser ammo with none mercury primers so I can shoot it. .
I was just looking at the older guns section of our gun store. I saw a gun that had a boyd stock. So it stood out. I started looking closer and I realized that this gun was a CZ but the strangest thing was the action looked just like a Mauser k98. Rifle it said 8mm-06 24 1/2 inch barrel. I started to piece together they had taken the sights off and there was a scope incl with the gun. Camouflage cheap, has a "W" on the cap,and looks nice though. I put it on their layaway program why did some more research. I'm a hand loader I know that it was going to be a hand load caliber and I didn't want this gem at such an affordable price of $299 to get away. I'm looking for a project done and I figured worst case scenario and I could be wrong I've got a check made k98 action to build a play rifle on. Which for 300 bucks is a little steep for just okay 98 action but those are going up in value as less and less around and they are solid so I can build a pretty heavy duty long range gun on it. I don't know the twist. It looks like it could be the original barrel but the barrel was turned down in two different spots and there are plugged holes where it looks like there was sights attached to that barrel so I'm guessing it's original. Everything was all reblued very nicely I don't understand the multiple turning down of the barrel broadcast like every when is 8 inches is turn down so you have three sections of barrel that are different diameters on the outside
8mm 06, great hog spanker for the swamps here in the south. Brass is easy to get, neck up that prolific 06 stuff and get the poor man's magnum. One thing about a mauser action, it is controlled feed, huge claw extractor makes it rum in any position in lncuding upside down! Strong and reliable. .323 cones in a few different projectiles and weights, one could even do hard cast I am guessing getting a mold made at a machine shop not too crazy expensive. Love some of the not so vouge cartridges like .300 Savage which almost became a military use but due to the steroer shoulder angle, complicated reloading reliability. It's loadable to .308 all day, with the .39 cal. Bullet offerings and new powders. My 2¢ worth, OG's rule like OC's (old cartridges)
In the mid sixties, on a hunt in the Upper Peninsula, my dad had a sporterized M98 and his friend Dick had a sporterized '03 Springfield. Both rifles had the same type aftermarket stock. In the pre-dawn darkness they got their rifles mixed up. After a few minutes Dick found me and said that he was having difficulty loading his '06 cartridge in the chamber. I knew that we immediately had to find Dad who had an 8 mm Mauser cartridge in the chamber of the '03 rifle. Firing it would have been a disaster. Later I had the Williams Gunsight Co. re-chamber the Mauser rifle to 8 mm/06 and I loaded ammo for it. Today it's a much better cartridge due to a wider selection of better bullets.
I once had a pre WWII Mauser 98 with a Krupp Essen 1/2 round, 1/2 octagonal bbl, light sporter stock, tang sight, double set triggers, claw mounts on receiver bridge (Alpine rifle) that was rebored to 8-06
Just had one in the shop. Like you guys talked about a sporterized FN 98Mauser. Guy tried to chamber 8mm Mauser ammo and it would not lock so I casted it and it is a 8mm-06 by my measurements. Not sure how to post a pic in here.
Ryan, Jimmy and Mark great show. The 8x57 or the 8-06 are not getting attention in US just because nobody has paid to be done so. As all European calibres are downloaded at the factory, the publish data also downloaded and even SAAMI specs have special downed the allowed the max pressures. In US the hype and paid campaigns make things look good and desired. The 6x62mm Freres, 9,3x64mm Brenneke, 9,3x66mm Sako, 8,5x63 REB just to name a few, are almost unknown of the public just because nobody makes it great on the shows and the publication do not talk about it, just because they do not get paid to do so. The 8x68S is much older and powerful than a lot of US magnums, yet unknown and underrated. The hype of the short actions is a joke, talking about 0.025 of a second faster? Half an inch shorter? Keep up with your good show. Cheers
8mm-06 is awesome! You guys are too young to realize how popular this cartridge was and still is. The Speer 200 grain bullets with a neck up 30-06 Springfield brass is a thumper. Although the 338-06 A-Square cartridge is far superior to the 8mm-06, because of available bullets. The 35 Whelen cartridge is also more popular. Finally High BC bullets are not needed for real big game hunting and I laugh when I hear you guys talk about high BC bullets.
you guys REALLY liked the 350 Legend. well, there's a new cartridge gaining some steam called the 6mm Max out there that's based on the 350 legend case. 6mm ARC type energy and accuracy, but doesn't require the paper thin bolt walls that 6mm ARC and 6.5 Grendel do in AR type weapons. seems pretty cool, definitely has advantages over existing options, and could benefit from some exposure on your platform. could probably even get the guys who invented it on your pod to talk about it.
Do you know why the 8mm Mouser is more powerful than the 8-06? I seriously considered getting the 8-06 once but found out that is wasn't as powerful as the 8mm Mauser? Which is strange for me since the -06 case is larger.. Please also consider talking about the 10.3x68
You have bad information. 8mm-06 isn't loaded by any ammo manufacturer so it's handload only. You can load as hot as you like and it has a larger case volume than 8x57. Choose your powder carefully and work up a load to your liking. I'm getting 2840 fps with a 200 grainer. I don't think an 8x57 will top that.
I love when he says it’s like a 308 My old man had a 8mm Mauser in a cast Ava overseas and he always called in “like 308” and as a kid I’d see it and be like looks completely different, took ages to click it’s cause it did similar things and everyone had one
Gentlemen, by my Gewehr 98k’s demand, 8MM Mauser (and feel free to combine the 7mm right in there with it for my Argentine Mauser!) Ryan and crew, bless you sirs!
The 8mm.'06 closely approximates the ballistics of the. 338 '06 a square. It's an accurate, hard hitting cartridge, capable of taking anything on the North American continent, and is a solid performer on African plains game.
Can you do a segment on the French 7.5x54. A cartridge that was way ahead of its time and totally applicable today for hunting and self protection. Just not much brass....
The .303 British had more potential and the aghast adjuvant on one hand, while retaining a sense of its own identity by proxy. This would be from world war be to world war twas, and beyond that scope, there are many tales to tell of personal integrity which consumed those that flew overhead only to see their own devastation. Best
Longest shot and kill on an animal was in 1988 with a war souvenir 8x57mm mouser in Montana... 674 yards on an elk using the vernier peep sight on the gun
Nothing at all wrong with the 8mm(323cal) caliber. It just hasn't seen the love from the bullet manufacturers the .308cal and 338cal have seen. Before the 325WSM came out, I developed an 8mm Wildcat based on my Improved 7mm Dakota case. I named it "8mm Elkhamr" . Loaded using 200gr Nosler Accubonds at 3120fps, It's an Incredible round matching the 300Win mag ballistically, with the thump of a 338Win Mag using 225gr bullets!
It's funny how they describe the happy accident that .30-06 has the same rim diameter as the Mauser cartridge and nobody really mentions that the US adopted a Mauser rifle after discovering the Spanish Mausers were better than their Krag rifles in the Spanish-American war. And since the Spanish Mausers that Springfield copied (and paid licensing fees to Mauser) already used the 12mm rim diameter in their 7mm Mauser cartridge, there wasn't a huge reason to change it. Thus, the .30-06 shares a rim diameter with the Mauser cartridge because it was born from tinkering with a Mauser action. In a roundabout way, the 7mm or 8mm Mauser is the parent of the .30-03 and .30-06 cartridges.
I rechambered my Mauser back in the 60’s to 8mm/06 and made a fine sport rifle out of it. We turned down the barrel and removed the sights then altered the bolt to accept a scope put in an adjustable trigger and had a Myrtlewood stock made for it. Shoots great.
@miketychewicz that sounds alot like my 1938 Persian Mauser. Somebody took great care and surely considerable expense to convert it. 29" barrel shortened to 24 3/4" and recrowned. 2 position safety and turned down bolt. Redfield bases, rechambered and custom made tiger maple with rosewood endcap Monte Carlo stock. Good thing they also installed a good butt pad because it kicks. I took my second deer this fall with it, but my loads are really built for moose and elk. Hopefully next fall I can test it on something bigger. Cheers.
338-06 is a phenomenal round, I’ve taken many deer with it
Hey boys, thanks for giving a little respect to the old 8mm 06! I picked one up recently for $375.00 Canadian. It's a beauty. Some old guy sporterized it back in the 50's. Tiger maple stock with rosewood caps, nicely turned down bolt, modified safety, already had a Redfield base mounted. Been working up some loads and I can't wait to get out to the range. 200 grain Nosler Accubonds.
Continued: Well I got the old 8mm-06 down to the range, and it shoots great. With 56 grains of 4350 it makes nice patterns at 100 and 200 yards.
56 grains of 4350 is what I use in my '06 to push 165 grain projectiles. It moves them at right around 2875 fps.
@@georgesakellaropoulos8162 that's terrific! I hope to get 2700 out of my loads.
@@wayne3340 seems like a great find, enjoy it!
35 Whelen! Seeing as we're on a 30-06 parent case kick!
Awsum hunting round
@@aussieshootandhuntadventur4973
My favorite caliber bar none. It would indeed be nice to hear someone talk about it.
0:(;:
lol pl
Got my first whitetail with my 8mm06 the other day. Just above the shoulder, through the spine. No damage to the back strap, heart or liver. Flat out to 220 yards.
Heck yeah - congrats, Wayne!!
I have a beautiful example and use 200 grain Nosler Partition bullets. Taking it moose hunting next month.
That is some very cool content you guys create. We have some interesting 8mm catridges here in Europe like 8x60S, a 8mm Mauser lenghtened to get around the Versailles treaty or the 8x64S, made prior to WWI, very similar to 8mm06 but more powerful and the magnum 8x68S, from 1938, same powerlevel as the excellent .300 Wby. Weidmannsheil form Germany!
Shot my first elk with an 8mm-06 180 grain ballistic tip. Phenomenal cartridge if you ask me. Glad you chose to go outside the box and talk about this cartridge. I still have it and it has the nazi stamp on the barrel
The 257 Roberts! An underrated cartridge for sure! It needs some justice.
458 win mag
.257 AI. The best quarter bore ever.
My favorite cartridge. Imagine a world where the 257 Bob is again popular and ammo plentiful.
False. 25-06 in 120 gtains. Bang flop.
My deer rifle for the last 20 years is a an 8mmo6 .I love it , and it has taken a lot of deer .just like you guys said it is a German Mauser model 98
Well if you're gonna do the 8-06, it's only fitting you do the 6.5-06!
They did a whole podcast on 6.5 cartridges
@@eggbert191 and nearly no mention of the 6.5x55 it was just a foot note
@@danietkissenle :(
Could go one more with the 256 newton (uses .264 despite the name)
sticking with 8mm, 8mm remington mag?
I own a full custom build to 8mm -06 . I chose it based off of a build I wanted to duplicate from an 1957 article. Now that there are great projectiles from Nosler and Hornady it really performs across the board.
The 8 rem mag is a wicked round
Do a 10 min talk on the .22 hornet, .22 k hornet and .17 hornet!
I actually found a box of 8mm-06 in my grandfather's ammo cabinet recently and was looking for more information on it. Good stuff guys! Love the podcast!
How about some handgun cartridge love. Possibly handgun hunting cartridges?
.44 Magnum has a rich history to start things off!
.454 Casul has the halflife, the spunk and enough cachet to win over starlets and stalactites.
👋🏼(SuggesTion Below to Consider) I’m glad to see this caliber discussed today, especially bc I just won bidding on a finely customized Mauser chambered on the 338-06 A-Square, instead of the 8mm-06.
I chose this chambering to fit between my goto 270 Win and my only Magnum, the 375 H&H. This caliber fits perfectly in between the capabilities in the my bookend calibers when you consider bullet grain weight that each cartridge is best efficiently at 2850-3000fps.
Please consider to touch base on this chambering even if it’s not on it own.
🤔 Such as a topic discussing very efficient and effective NON-Magnum rounds. 🙏
The 8mm-06 was a great game getter, but there was more to making one than running the reamer in. If you did that you would have an inaccurate rifle, you really needed to set the threads back and reface the barrel before reaming. The problem is the 8x57 neck in military rifles is large enough to create an extra shoulder on the 8mm-06.
Two big issues have plagued the 8mm for all these years: First, there are two different bullet diameters associated with German rifles .323 and .320 and that's not the end of it, other countries call .329 diameter 8mm.
The other problem has been bullet availability. You could find two bullet weights in .323, a 170 round nose and a 175 spitzer. Then, just before the 8mm Rem. mag came out a 123 grain spitzer bullet came out, followed by a 220 grain spitzer and then the Remington round came out and a 180 grain bullet became available. These last two were a little tough for any non-magnum velocities, but if you needed penetration they were the ticket.
Great discussion, glad to see the 8mm-06 cartridge mentioned, In some ways it was the most underrated hunting wildcat ever developed.
i would hunt anything in the world with the 8mm-06 AI.
Barnes makes a 160 grain TTSX for the 8mm. Fantastic bullet that brings the 8mm into a modern playing field.
Great vintage cartridge that was born by a need.
When I was little I was given a second edition Sierra bullet loading manual and I remember flipping through it and finding the 8mm odd 6 and thinking that was the coolest thing ever. I still want one 🤘😂
You all missed out on the best part. Mr. Ackley wildcatted this wildcat, That 200 grain Acubond will do close to 3100 fps and higher BC than the 338. On the 7mm Mauser case head and 200 grain bullet, the 8mm AI (or somebody else's improvement, thank you Mr. Rocky) is the one to beat.
I have 06s & 308s, I own several 8mms . In my opinion it outperformed 06 and my 308 in hunting. And I also love here loading for it I am thinking about chambering one in 8-06, I believe it will be a blast to handload for.
I have a soft spot for the 8's. Started with the 8x57 that I rebuilt and now I've got an 8x68S and a wildcat in the works.
I just inherited an fn mauser that was converted to 8mm-06 from my grandfather. My dad and I didn't know what it was because my grandfather never brought it out, we always shot shotguns bird hunting with him. I'm slowly getting the reloading stuff now.
I love the 8mm mauser , have taken many of deer with it .
I was around gun shops for the "hot stove league" of cartridge discussions in the 1970's as my grandfather was an avid player. The 8mm was really held back by the American confusion with anything metric, and also the .318 vs .323 mess. The Germans switched the bore diameter (way before the World Wars in 1905) but that didn't stop people saying there were two 8mm calibers floating around and if you ID'ed your bore wrong you would kill yourself with an 8mm. It cursed the 8mm in America!
Do the Weatherby cartridges!
8mm-06 was a wild cat developed after WWII.
Wilhelm Breneke developed the 8x64 in 1912 offered it to the German military they said no thanks and he released it on the commercial market for hunting. It was popular prior to WWII and after and still is in Europe the Czechs still load it.
I've owned 1 CZ VG47 bolt action hunting rifle in 8x64 and its a hammer on wild boar.
Best podcast bar none! My suggestion is still some more big bore. 577 nitro, 577 t Rex, 505 Gibbs, 470 nitro, 460 a square short. So many more, absolutely love big bores!
having one made now on a winchester action,, ,, it will be what i use on elk next year,,lots of good bullets,,,,,and good power and range,,,,8mm-06 needs to be known more,,thanks for doing this video,,,,,,
American 8 x 57 ammo is way downloaded because of old 8 x 57 bullets measured .318 instead of .323 .
I would love to see a video on the rem age barrel nut is it a good choice for people that want to diy and make a old rifle shoot better
I now own a 30, 32, and 35 caliber rifle all Mauser actions. 35 whelen is still my favorite but the 8mm-06 may take the spot soon.
This talk brings to mind the 8MM Remington Mag. Do it if you don’t mind...Maybe you could do it as part of great cartridges that faded. The 264 Win Mag could be included.
6.5&350 rm, 6mm rem,358 win, 264 wm, 358 norma, 8mm rm, 325 wsm, 338 rcm, 7mm & 300 saum, 9.3x64, and 366 sako mag should be on your wish episode. All rounds that should have large cults following,
You should piggy back off this into the old 8mm Poor Man's Magnum. It's an 8mm mauser rechambered to accept an necked down 338win mag to 8mm for mauser rifles.
So, considering this modifies a German Mauser, if one were to find one of these for sale does it take away from the Mauser’s value or add to it (since 30-06 brass and more 8mm bullets are available)?
Resale, bro. Its a thing
It will reduce the collector value.
As a kid in the sixties my grandfather had a sporterized 8 mm Mauser. I remember it was a beautiful rifle. I don't know if it was 06 or not.
Let’s see the 8mm Mag and some of the 9.3’s!
When are you going to do 8mm Mauser?
375 rum 338 rum 300 rum...
I enjoy these. 7 mm08 was great. In the same area is the 264 win mag. I'd like to see that one discussed
Obsolete now with the .50-264 BMG
Also, 8mm Mauser ammo is more expensive then 30.06 so cost wise if I buy 30.06 and load them to 8mm-06 that is the better way to go IMO. You typically would want brand new cases for necking up to the 8mm-06.
A 338-06 would be cool
9.3x62 Mauser would be great
Great example of a cartridge with an interesting history.
I have a 33806 it's an awesome gun we have taken lots of deer with it. It's a deadly truck gun and awesome in the boat moose hunting. It's a howa 1500 that started as a 3006 and I had it re barreled to 33806 a square. 25 inch barrel which is a sweet length for it with a 11 degree target crown on a heavy sporter contour like #2. I run 225 gr TSX,s out of some lapua 3006 brass. Man the gun shoots great.
You see this in old Speer reloading books. I remember this old 8mm-06. There was another conversion on Mausers called the 8mm PMM (poor man's magnum). It was basically an neckedndown 338 win mag case to 8mm.
The 8mm-06, especially in its AI form is one of the best rounds for someone not big on recoil and only shoots 400 in.
Please cover the 338-06
what about the new .33XC or .37XC ? Best regard from France !
Only the 270-08 is more obscure than the 8mm-06.
I know the .270 is technically based on the .30-03 but is there really much difference to the .270-06?
@@borkwoof696 Here is a worthwhile video to watch, and though I can't confirm anything he says, it makes a lot of sense.
th-cam.com/video/2rT7DpXyxfw/w-d-xo.html
But honestly, in modern times, when all 270 brass is virgin and not formed from something else, it doesn't matter.
@@adamhymas4620 I just realized you said .270-08🤦♂️
7mm-08 is close.
More importantly, much better, and on the shelves.
Think like a salmon and fight upstream, or like a dolphin and ride the bow wave ...
No, bro, he said .270_06. Information. Attention to detail.
I have one built on a Mauser 98. It has freebore and it is powerful but doesn't kick too much. 21 inch barrel. synthetic stock. Shoots the 175 grain Sierra Pro Hunter at about 3,000 fps. I put a .5 inch freebore so it reduces the pressure from hot loads. One hole groups with H380! Puts a deer down RIGHT NOW!
If you haven't already, could you chat about the 338-06?
…you seem to refer to the 8mm Mauser , presume you talking about the 8x57JS!? Hear in Europe this caliber is very popular still….probably behind the 30-06, 9,3x62 if we talk about European Moose hunting.
It would be cool if you could do a comparison between the 8mm06, 8x57JS and maybe the 8x68s!! 👍
My Grandfather/gunsmith built me one of the gems and I love it, now my son uses it on deer
I would love to see a deep dive on the 338-06, I’m currently building one and will start load development soon!
8mm Mauser!
This makes me think if there's an 8mm-08.
I also don't care to Google it, but the name alone should sell.
The 30-06 has a crap ton of kids.
Yeah it's the ultimate papa bear.
Yup. 7x57 has a bunch of grand (and great grand) kids! :-D
My Dad showed up one day with an 8mm Mauser that he bought in Nevada. It was made in about 1938 by the Czecholslovakian company that makes the modern CZ firearms made today. I thought about rechambering to 8mm06 but the gun has so much sentimental value because it was given to me by my Dad. I need to buy some modern 8mm Mauser ammo with none mercury primers so I can shoot it.
.
The tradeoff from mercury is lead, bro. Pick your poison.
"spat balled". 👏
I was just looking at the older guns section of our gun store. I saw a gun that had a boyd stock. So it stood out. I started looking closer and I realized that this gun was a CZ but the strangest thing was the action looked just like a Mauser k98. Rifle it said 8mm-06 24 1/2 inch barrel. I started to piece together they had taken the sights off and there was a scope incl with the gun. Camouflage cheap, has a "W" on the cap,and looks nice though. I put it on their layaway program why did some more research. I'm a hand loader I know that it was going to be a hand load caliber and I didn't want this gem at such an affordable price of $299 to get away. I'm looking for a project done and I figured worst case scenario and I could be wrong I've got a check made k98 action to build a play rifle on. Which for 300 bucks is a little steep for just okay 98 action but those are going up in value as less and less around and they are solid so I can build a pretty heavy duty long range gun on it. I don't know the twist. It looks like it could be the original barrel but the barrel was turned down in two different spots and there are plugged holes where it looks like there was sights attached to that barrel so I'm guessing it's original. Everything was all reblued very nicely I don't understand the multiple turning down of the barrel broadcast like every when is 8 inches is turn down so you have three sections of barrel that are different diameters on the outside
I recently picked up a custom mauser in 8mm that I'm planning on converting to 8mm 06 . I have several thousand rounds of 06 brass, and no 8mm brass
8mm 06, great hog spanker for the swamps here in the south. Brass is easy to get, neck up that prolific 06 stuff and get the poor man's magnum. One thing about a mauser action, it is controlled feed, huge claw extractor makes it rum in any position in lncuding upside down! Strong and reliable. .323 cones in a few different projectiles and weights, one could even do hard cast I am guessing getting a mold made at a machine shop not too crazy expensive. Love some of the not so vouge cartridges like .300 Savage which almost became a military use but due to the steroer shoulder angle, complicated reloading reliability. It's loadable to .308 all day, with the .39 cal. Bullet offerings and new powders.
My 2¢ worth, OG's rule like OC's (old cartridges)
Ok typos damn auto correct and fat fingers
I own one, love it
In the mid sixties, on a hunt in the Upper Peninsula, my dad had a sporterized M98 and his friend Dick had a sporterized '03 Springfield. Both rifles had the same type aftermarket stock. In the pre-dawn darkness they got their rifles mixed up. After a few minutes Dick found me and said that he was having difficulty loading his '06 cartridge in the chamber. I knew that we immediately had to find Dad who had an 8 mm Mauser cartridge in the chamber of the '03 rifle. Firing it would have been a disaster. Later I had the Williams Gunsight Co. re-chamber the Mauser rifle to 8 mm/06 and I loaded ammo for it. Today it's a much better cartridge due to a wider selection of better bullets.
I once had a pre WWII Mauser 98 with a Krupp Essen 1/2 round, 1/2 octagonal bbl, light sporter stock, tang sight, double set triggers, claw mounts on receiver bridge (Alpine rifle) that was rebored to 8-06
Can y’all do a 10 minute talk on the 6.8 spc ???
Here I am bee-bopping along and listening to VNP. Then all of a sudden...there it was. I hear it. Friggin Wizzim! 😂 Dangit!
You can run but you can't hide! :)
Suggestion for +-10 minute talk: 375 Weatherby.
Just had one in the shop. Like you guys talked about a sporterized FN 98Mauser. Guy tried to chamber 8mm Mauser ammo and it would not lock so I casted it and it is a 8mm-06 by my measurements. Not sure how to post a pic in here.
Ryan, Jimmy and Mark great show. The 8x57 or the 8-06 are not getting attention in US just because nobody has paid to be done so. As all European calibres are downloaded at the factory, the publish data also downloaded and even SAAMI specs have special downed the allowed the max pressures. In US the hype and paid campaigns make things look good and desired. The 6x62mm Freres, 9,3x64mm Brenneke, 9,3x66mm Sako, 8,5x63 REB just to name a few, are almost unknown of the public just because nobody makes it great on the shows and the publication do not talk about it, just because they do not get paid to do so. The 8x68S is much older and powerful than a lot of US magnums, yet unknown and underrated. The hype of the short actions is a joke, talking about 0.025 of a second faster? Half an inch shorter? Keep up with your good show. Cheers
Thanks for tuning in, Rolando! We appreciate it :)
Rolando, are you giving off the existential vibe that we can only symbolically ever shoot the gnu, much less be that gnu?
I have a 1940s 8mm true mauser and would love to go there but, the 8mm ammo isn't bad now... 👍
Need to do a ten minute talk on the 300 Weatherby!!
How ‘bout one on dioxins?
@@johngeddes7894 I think they mostly do 10 min talks on cartridges or vortex products lol
8mm-06 is awesome! You guys are too young to realize how popular this cartridge was and still is. The Speer 200 grain bullets with a neck up 30-06 Springfield brass is a thumper. Although the 338-06 A-Square cartridge is far superior to the 8mm-06, because of available bullets. The 35 Whelen cartridge is also more popular. Finally High BC bullets are not needed for real big game hunting and I laugh when I hear you guys talk about high BC bullets.
you guys REALLY liked the 350 Legend. well, there's a new cartridge gaining some steam called the 6mm Max out there that's based on the 350 legend case. 6mm ARC type energy and accuracy, but doesn't require the paper thin bolt walls that 6mm ARC and 6.5 Grendel do in AR type weapons. seems pretty cool, definitely has advantages over existing options, and could benefit from some exposure on your platform. could probably even get the guys who invented it on your pod to talk about it.
I would like to hear about the 257 Weatherby mag
Do you know why the 8mm Mouser is more powerful than the 8-06? I seriously considered getting the 8-06 once but found out that is wasn't as powerful as the 8mm Mauser?
Which is strange for me since the -06 case is larger..
Please also consider talking about the 10.3x68
You have bad information. 8mm-06 isn't loaded by any ammo manufacturer so it's handload only. You can load as hot as you like and it has a larger case volume than 8x57. Choose your powder carefully and work up a load to your liking. I'm getting 2840 fps with a 200 grainer. I don't think an 8x57 will top that.
I love when he says it’s like a 308
My old man had a 8mm Mauser in a cast Ava overseas and he always called in “like 308” and as a kid I’d see it and be like looks completely different, took ages to click it’s cause it did similar things and everyone had one
If they did what would it be
Didn't really talk about performance?
Gentlemen, by my Gewehr 98k’s demand, 8MM Mauser (and feel free to combine the 7mm right in there with it for my Argentine Mauser!) Ryan and crew, bless you sirs!
The 8mm.'06 closely approximates the ballistics of the. 338 '06 a square. It's an accurate, hard hitting cartridge, capable of taking anything on the North American continent, and is a solid performer on African plains game.
I'd like to hear a talk on the modern calibres you each DON'T like and why.
I would like to see 270, 280, 270 wsm, and 204 ruger. Great videos. Thanks
Can you do a segment on the French 7.5x54. A cartridge that was way ahead of its time and totally applicable today for hunting and self protection. Just not much brass....
Would love to see y’all go over the history of the .303 British. Have my grandfathers from WWII and have always found it neat
The .303 British had more potential and the aghast adjuvant on one hand, while retaining a sense of its own identity by proxy. This would be from world war be to world war twas, and beyond that scope, there are many tales to tell of personal integrity which consumed those that flew overhead only to see their own devastation. Best
Video idea!!!!! In one sitting see how many times you can fire and reload one piece of brass! Just fire it then reload it then fire it again!
Longest shot and kill on an animal was in 1988 with a war souvenir 8x57mm mouser in Montana... 674 yards on an elk using the vernier peep sight on the gun
Nothing at all wrong with the 8mm(323cal) caliber. It just hasn't seen the love from the bullet manufacturers the .308cal and 338cal have seen. Before the 325WSM came out, I developed an 8mm Wildcat based on my Improved 7mm Dakota case. I named it "8mm Elkhamr" . Loaded using 200gr Nosler Accubonds at 3120fps, It's an Incredible round matching the 300Win mag ballistically, with the thump of a 338Win Mag using 225gr bullets!
Still got mine that my dad (old gunsmith) made fir me as a kid, decades ago!
7x57 Mauser!
It's funny how they describe the happy accident that .30-06 has the same rim diameter as the Mauser cartridge and nobody really mentions that the US adopted a Mauser rifle after discovering the Spanish Mausers were better than their Krag rifles in the Spanish-American war. And since the Spanish Mausers that Springfield copied (and paid licensing fees to Mauser) already used the 12mm rim diameter in their 7mm Mauser cartridge, there wasn't a huge reason to change it. Thus, the .30-06 shares a rim diameter with the Mauser cartridge because it was born from tinkering with a Mauser action. In a roundabout way, the 7mm or 8mm Mauser is the parent of the .30-03 and .30-06 cartridges.
i have two 8mm 06 my dad and grand father had them made in the 50ds.
I think it was popular to re chamber 8mm mauser to 8mm-06 an ez conversion to increase performance and 30-06 brass very common.
35 Whelen!
I would love to see a talk about the 7.62x39
Yes, different platforms, plus its uses and reloading for it.