hello sir,there is a small problem i got in lcd program.i am using 16*2 lcd display through which i am not getting any output.So igo through the program that you have given in the link .You have mentioned there 20*4 lcd in the programm. So please help us with this problem. thank you sir.
Why would you need the password texted to the phone? Doesn't it ruin the idea behind biometric authentication? It becomes almost the as normal PIN code.
@@Emtron_Technologies sir firstly create obj files of all c code and after link this obj files.it is correct way? command prompt suitable for create obj files?
Thanks for your interest in our project. We provide you the complete working project with Hardware & Software. Please send a mail to bsp.embed@gmail.com
Dc gear motor is how many volts?
Can't we use any other device other than gsm module for this project?
Can we use R307 fps?
hello sir,there is a small problem i got in lcd program.i am using 16*2 lcd display through which i am not getting any output.So igo through the program that you have given in the link .You have mentioned there 20*4 lcd in the programm. So please help us with this problem. thank you sir.
20 * 4 LCD will also works for 16 *2. Please check the hardware once.
thank you sir.i will check again and update you
please sir i haven't the hardware you used how can i implement it in proteus and if you have the source code. thanks
I have not idea on proteus. The source code is available in the video description.
can you suggest an alternative for gsm module?
For What Application.
great work ..
+sangram gouda
Thank you Sangram..
Why would you need the password texted to the phone? Doesn't it ruin the idea behind biometric authentication? It becomes almost the as normal PIN code.
Two level of authentication...
sir what's the size of the project.. I mean dimensions..and wt may be the overall cost Sir
It's prototype design. Not customized for product. It dimension will be 10 inch * 12 inch. Overall project guidance cost will be 25K.
Hii Sir mail me yashas360@gmail.com how long this project take to complete... we want to order first ah... or we have to come to institutions ah
It will take 10-15 days, once you place the order.
Haii sir i want know how to make vehicle unlocking system using fingerprint and gsm same as above project
You can make use of this idea. Instead on Motor, use relay to control the ignition of the vehicle.
I want full Working project.
How much is the cost?
12K
Sir can i use gt511c3 fingerprint scanner instead of r303 using the same code given in the github link.
They are not compatible. I haven't developed code for GT Fingerprint module.
Sir the r303 fps is not available, please suggest me the substitute for it
You can use R305
sir what is the j6? and what is the easiest way for upload the code?
J6 RMC connector for sprinkler motor.
@@Emtron_Technologies thank you!
sir can you give me your email address?
Let me know your doubts here.
@@ceylonmusicstatus1400 source code is given in the description. You have to compile to generate Hex file.
@@Emtron_Technologies sir firstly create obj files of all c code and after link this obj files.it is correct way? command prompt suitable for create obj files?
Sir, if the r303 fingerprint sensor isn't available, what are the substitute fingerprint sensors
You can use R305 or R307.
@@Emtron_Technologies thank you
@@Emtron_Technologies full details of the ir sensor you are using
@@Emtron_Technologies at the Gsm module, can sim800L can used as a substitute if sim 900 is not available?
It's normal IR proximity sensor. You can use SIM800L.
in sim800l how can the connections be made?
Checkout the Tx, Rx and Gnd Pins in the SIM800L GSM Modem. Connect these pins to Microcontroller serial Pins.
my buzzer continues to be on even after the on time ends and i declare that port to zero. What can I do?
Declare ZERO to pin is input and 1 to pin is OUTPUT. Depend on how you configure an buzzer, You can set to input or output.
In the code, what is FP_SW_PIN and why is it that when it is 0, we have to select the choice
It's for external switch for entering into the registration mode. When you press, the pin value is logic ZERO.
BUT P1_0 is already 4*4 kbd
@@karthikreddy-zk9xy Matrix Keyboard is connected to PORT1(all 8 bits P1_0 to P1_7).
@@karthikreddy-zk9xy Can we even access, one switch from that keyboard.
@BSP Embed I Want To Buy This Project Please Reply ASAP.
Sorry, We don't have an facility to sell these projects.
sir please send me the code of project sir.
Thanks for your interest in our project.
We provide you the complete working project with Hardware & Software. Please send a mail to bsp.embed@gmail.com
@@Emtron_Technologies sir kindly send the working and coding of this project thnks in advance
@@syedaasra2423 Please check the video description.
Hello Anil, please visit our institute. We will guide you to develop the project. For more information please contact through mail bsp.embed@gmail.com
Hi, I'm located in Bengaluru. Please send me the mail.