I have an Expert 24 LX plotter (it does not have an optical reader) and I would like to know if with this plotter I can cut figures that are more than one meter long? for example cut a rectangle or any figure of 50 cms. wide x 200 cms. long ... how can I configure this plotter to make that cut or longer cuts?
wait, how do you contour cut if you already printed out the design on vinyl adhesive paper through your printer and it doesn't have margins or any way of reading the pattern when placing it in the gcc cuter? do you have to print the design through the gcc program in order for the cuter to know where to cut?
Hoping someone can help me. My problem starts around 2:41 My GCC Plotter doesn't read my crop marks printed on the paper, it just begins to cut automatically, making the cut way off.
you can use media by SIHL USA, they have adhesive vinyl with special coating that can be printed with desktop inkjet printers using pigment or die based ink.
In this video we have print on paper, using an inkjet printer. But you can use inkjet paper or sublimation paper & laser paper depending on what you want to do. We wanted to show the print & cut possibility of the software WinPCSIGN using GCC cutter.
mine isn't working properly. the blade barely skims the surface of the vinyl and doesn't cut. I've tried adjusting the blade physically and tried the dlvc software and adjusting the blade force to max. nothing!
When I do this, and I go to cut project, I get two error codes and the program shuts down. Is this because I have a GCC Expert 24LX plotter and not a JaguarIII?
Ivan W. Polanco Thanks for your help! Yes, The first window that pops up says "Adresse -> 0code-1073741819 Exception_Access_Violation" and the second pop up says "Adresse -> 2002733098 Code= -1072365552" After those appear, the program shuts down.
Hi, very important to know that you need to select Windows Port and not USB in WinPCSIGN (Plotter code/Port/Windows Port). The error code that you sent to me are not from WinPCSIGN.
Ivan W. Polanco That worked! I had it set to USB. Thank you very much for your help!! I'm currently using the trial for the basic version of WinPCSIGN but will be buying the pro version. Thanks again for your help and expertise.
+Graphicx100 it's how he made the stickers. He put a white stroke on them. From the looks of the octopus one he shouldn't have did one because it looks like it had one to begin with.
this is not precise at all, the cut is offset to the right...I'm having the same issue with mine but offset to the top left and I tried everything... the silhouette cameo with the same software and same image and its way better...that machine is crap and GCC don't give a .... about theirs customers.
Hi Jay, I suggest you to contact us at www.winpcsign.ca/support our tech.reps will be able to help with your contour cut setting. We also provide help in French.
I have an Expert 24 LX plotter (it does not have an optical reader) and I would like to know if with this plotter I can cut figures that are more than one meter long? for example cut a rectangle or any figure of 50 cms. wide x 200 cms. long ... how can I configure this plotter to make that cut or longer cuts?
wait, how do you contour cut if you already printed out the design on vinyl adhesive paper through your printer and it doesn't have margins or any way of reading the pattern when placing it in the gcc cuter? do you have to print the design through the gcc program in order for the cuter to know where to cut?
Hi can you make a video how to set it up on the program before you send it to the cutter
Need this
Hi my plotter ExpertII LX doesn`t attempt to read the marks but it moves to cut as it was vynil. Any suggestions?
Hoping someone can help me. My problem starts around 2:41 My GCC Plotter doesn't read my crop marks printed on the paper, it just begins to cut automatically, making the cut way off.
you can use media by SIHL USA, they have adhesive vinyl with special coating that can be printed with desktop inkjet printers using pigment or die based ink.
you guys need to update your video
for contour cutting on the puma 3
In this video we have print on paper, using an inkjet printer. But you can use inkjet paper or sublimation paper & laser paper depending on what you want to do. We wanted to show the print & cut possibility of the software WinPCSIGN using GCC cutter.
You can print on vinyl with a inkjet printer. Look up Sihls 3988 printable aqueous vinyl, or Papilio printable vinyl
Do you sell the cutter or just the software?
comopuedo hacer estomismo con un plotter roland gx 24 gracias
mine isn't working properly. the blade barely skims the surface of the vinyl and doesn't cut. I've tried adjusting the blade physically and tried the dlvc software and adjusting the blade force to max. nothing!
michael mccabe i seen a vid it would do that it was becoz the blade holder wasnt in the cutter device properly
My cutter does not stop, he walks from side to side and I do not know what to do
Hi Please review that the word: JAGUARIII is in Vinyl Commands.
WinPCSIGN/ Setting/Plotter Code/Commands/Special commands/Vinyl command
When I do this, and I go to cut project, I get two error codes and the program shuts down. Is this because I have a GCC Expert 24LX plotter and not a JaguarIII?
I work in WinPCSIGN company. Even you have GCC expert LX, JAGUARIII must be there. Can you give the error codes?
Ivan W. Polanco Thanks for your help! Yes, The first window that pops up says "Adresse -> 0code-1073741819 Exception_Access_Violation" and the second pop up says "Adresse -> 2002733098 Code= -1072365552" After those appear, the program shuts down.
Hi, very important to know that you need to select Windows Port and not USB in WinPCSIGN (Plotter code/Port/Windows Port).
The error code that you sent to me are not from WinPCSIGN.
Ivan W. Polanco That worked! I had it set to USB. Thank you very much for your help!! I'm currently using the trial for the basic version of WinPCSIGN but will be buying the pro version. Thanks again for your help and expertise.
can it alsow cut in size a3
omg did you see that cut......that machine is crap.........not even all the way around the image!!!!
+Graphicx100 it's how he made the stickers. He put a white stroke on them. From the looks of the octopus one he shouldn't have did one because it looks like it had one to begin with.
this is not precise at all, the cut is offset to the right...I'm having the same issue with mine but offset to the top left and I tried everything... the silhouette cameo with the same software and same image and its way better...that machine is crap and GCC don't give a .... about theirs customers.
Hi Jay, I suggest you to contact us at www.winpcsign.ca/support our tech.reps will be able to help with your contour cut setting. We also provide help in French.