This is awesome im new to the world of electro hobbies. Im currently working on a box containing various switches lights and sounds for my son as he has sensory issues and loves to flick switches and this has given me a few more ideas so thank you you're amazing
super keep it up waiting for more puzzles soon. a little suggestion please make a video on pcbway exploring thier website and telling how to order what specs you need etc.
Just found this video and discovered that this is the only escape room puzzle video. Is there a slim chance you'll pick it up again, I really liked the video??
cool gadget and video! Te receiver module will need some additional circuitry and code i think. it is not advisable to just cut power to a computer like that. the receiver module should detect of the pc is on, and then not react. Or even better send a USB keyboard signal to start the power down process of the PC in software.
That's how I did my 79 Z28 Camaro that I restored I shaved off the ignition put a push button in along with a serious switches to to make a combination and that's my way of Anti-Theft I got them in reach but hidden and to get it started you got to hit the right combination
For some time ago I saw your video about wireless charging then I tried to make the same circuit but it didn't work. I have no idea why it´s not working, but I noticed that the MOSFET got a bit hot, so I turned the 5 volts off. I've attached the MOSFET to a small heatsink with a screw and without heat paste. I also used two 10 k resistors in parallel instead of the 5 k resistor. When the circuit was turned on I looked at the oscilloscope and saw a small change when the secondary coil came closer to the primary, but that was not enough to turn a small led on. Is there somebody who knows how to solve the problem?
@@ELECTRONOOBS I used the IRFZ44N MOSFET. I noticed when the capacitor was charged and I unconnected the circuit from my 5 volts power supply the current raised very fast and fell down again on the secondary coil that was attached to the oscilloscope. Should I use another MOSFET? And is heat paste required?
So you programmed an SD card reader, and an interface for the fingerprint sensor, but cheaped out and kludged the USB stick? ROFL! But, seriously, if you can fit the USB code in there, it would make it much more damage-resilient. Keying on a simple file name, or even the USB stick's identifier, would make it much easier to replace when it's lost or broken. In a typical escape room used by many people, it's only a matter of time before the USB key turns up missing.
Arduino Course (Spanish): bit.ly/3ldW6kO
Follow me on FACEBOOK for more: facebook.com/Electronoobs
Help me on Patreon: www.patreon.com/ELECTRONOOBS
A series on escape room puzzles is awesome, glad to see you are going to pursue that!
Glad to hear that you like the idea!
Using rf to start a pc is a great idea , I love it
Beautiful escape box! I like the translucent panel around the USB key.
Brilliant idea! I love your channel and puzzle channels! It will be the perfect combo!
The coolest project on the internet...
Glad you like it!
That USB key trick is awesome! Thanks for sharing
Thanks :)))
This is awesome im new to the world of electro hobbies. Im currently working on a box containing various switches lights and sounds for my son as he has sensory issues and loves to flick switches and this has given me a few more ideas so thank you you're amazing
Excellent project 👏
super keep it up waiting for more puzzles soon. a little suggestion please make a video on pcbway exploring thier website and telling how to order what specs you need etc.
really love that rog logo
AWESOME
Keep it up🔋🔋
Love it! You should clean your pc though, it will be more silent. The back fan is full of dust
Nice video Dude :D love it. 👍
Your brother is lucky to be getting that cool ICBM launching looking device to turn on his computer.
Very cool project. Lots to learn from it. Well done. Thanks!!
Great job! Love escape room puzzles. Bit this One required quit a lot of components :-)
Superb !
Thx bro :))
Sam 🎵✌🏻
This really deserves more views
Haven't seen something better and cooler like that on the internet!
Nice job! Very cool way to demonstrate alot of different components.
Just found this video and discovered that this is the only escape room puzzle video. Is there a slim chance you'll pick it up again, I really liked the video??
cool gadget and video! Te receiver module will need some additional circuitry and code i think. it is not advisable to just cut power to a computer like that. the receiver module should detect of the pc is on, and then not react. Or even better send a USB keyboard signal to start the power down process of the PC in software.
now I have a reason to subscribe😎
Thanks :)
The best! ♥
Awesome electronics video 😍
A very fun project!
Awesome man keep it up
About the usb key, is it safe if other usb device(like normal flashdisk) accidently attached to that device?
It should be the, connector has only 5V connected to the + pin, so nothing should happen.
Great project
That's how I did my 79 Z28 Camaro that I restored I shaved off the ignition put a push button in along with a serious switches to to make a combination and that's my way of Anti-Theft I got them in reach but hidden and to get it started you got to hit the right combination
Amazing 😍
I made digital load project but its not working dac output is fixed at 5v not change after changing value on arduino
Did you tested teh DAC with the library first just by itself? Maybe the library or the DAC are not working...
@@ELECTRONOOBS i tested dac mcp4725 with your tutorial on website, its working fine. Can you recheck your code? Please fix my issue.
Good work guy
Super cool! 😎
To leave clean edges in holes you can do 2 cuts (in "X" pattern) with blade, and band inside the rest of the foil.
Sir u r great.....
❤️👍 awesome
Can you do mixing for delta wing from homemade transmitter and receiver.
Well done !
For some time ago I saw your video about wireless charging then I tried to make the same circuit but it didn't work. I have no idea why it´s not working, but I noticed that the MOSFET got a bit hot, so I turned the 5 volts off. I've attached the MOSFET to a small heatsink with a screw and without heat paste. I also used two 10 k resistors in parallel instead of the 5 k resistor. When the circuit was turned on I looked at the oscilloscope and saw a small change when the secondary coil came closer to the primary, but that was not enough to turn a small led on.
Is there somebody who knows how to solve the problem?
Are you using the same MSOFET as I did?
@@ELECTRONOOBS I used the IRFZ44N MOSFET. I noticed when the capacitor was charged and I unconnected the circuit from my 5 volts power supply the current raised very fast and fell down again on the secondary coil that was attached to the oscilloscope.
Should I use another MOSFET? And is heat paste required?
this needs to be on sale
I NEED to get one for my pc
Why did u give it the Rog logo
sir please explain this no. 164 ic for shift register from arduino and make code for it
Master key (USB) can be easily hacked by a potentiometer 😂
Overall nice SciFi project 💥
Yes, of course, but imagine you are in an escaperoom game, you always carry a potentiometer with you ? LOL
@@ELECTRONOOBS do you not??????????😂
noice details. love it
Take love from bangladesh
😍😍😍Wow
Love from India
Do you sell these?
Why no more JLCPCB? Bad experiences?
Wondering if you only want to add a little editing things to your file, but in 5 minutes you have to go attending an important presentation.
I have such a Samsung battery and I do not know how to connect because there are 3 contacts ... Help :)
Search the battery online or test it with a multimeter. Also, those battery usually already have a proetection circuit inside...
How much time taken by to write whole code?
Not that much...
Please more puzzles
that razer pc is killing me!
I will see a video with only how to turn on a pc with arduino on Bluetooth, 2.4ghz or 433mhz. And maybe how to power the arduino from an internal usb.
Bro why don't you explain anything about the arduino's code ?
"just $5 for 10 pcbs of 10x10cm"
Where have I heard those prices before?
So you programmed an SD card reader, and an interface for the fingerprint sensor, but cheaped out and kludged the USB stick? ROFL! But, seriously, if you can fit the USB code in there, it would make it much more damage-resilient. Keying on a simple file name, or even the USB stick's identifier, would make it much easier to replace when it's lost or broken. In a typical escape room used by many people, it's only a matter of time before the USB key turns up missing.
Sir can u make real capacitor dropper circuit that works without load.
Means output capacitor will blown when no load is connected.
👍
I cant find your Video on odysee dot com. WTF ?!
I'm still uploading them one by one. There's a lot a videos... sorry... I'll have them all soon
please make a laptop power bank.
You need to sell those
Is youTube is your only income..
My only question is how much
First comment :)
Well for a hacker it would be very easy to gain access
Bro do petrol engine video very easy at home
Looks too much like a bomb. Too cringy. I love the idea, looks great. My brain wouldn't let me touch that thing 😃 I'm cringing watching the video.
First dislike..........
Can you do mixing for delta wing from homemade transmitter and receiver.