Stihl Weedeater Carb Adjust
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Please Subscribe and leave comments
Don't forget to hit the notification bell next to the Subscribe tab to get notifications on my latest video. Also time and date for my next Live so you can jump on and Chat
Donate to: paypal.me/yatabata
Email: yatabata03@gmail.com
Also Subscribe to my fishing channel: "Fishing with Tim TJY"
This saved me today :)
Thanks to you I managed to make finish it all this evening before midsummer here in Sweden! :D
Thanks Erik, So happy to help you. I'm thinking of adding some instructional pictures to the video. I knew when I did this video it would get allot of views. It's now one of my top ten. Thanks again for watching and please share with friends in Sweden👍
Great vid maan....I saw you fighting with that "H" screw. Next time, pick it up off the table or set it on the floor/ground. The engine vibrates the table with then causes the body of the trimmer to vibrate even more giving way to a vicious cycle...lol....you got it all sorted though. Great job and explanation at the end there 👍
Thanks for watching, after I did this video I realized I could have used a small socket which I will do next time. I guess for folks trying this like me for the first time they would struggle too so in that sense I was keeping it real🤣
Thanks for the plug Tim! I am glad that helped you...
Great instructional video complete and to the point. Easy to understand.
Thanks Christian, there are other videos on this, but I wanted to make my own. After I did it was thinking why I didn't just use a small socket and ratchet wrench instead of the screwdriver. With it vibrating made it a challenge to adjust the high speed. Haha anyway I left it as is since the message was there either way. Thanks for watching and let your friends and family know about my videos. Tim
I have a Stihl weed eater, best weed eater I've ever had! Haven't had to tune the carby yet but if I ever have to I'll try this!! Thanks for the share Tim!😀👍💯
Thanks Robbie, I need to do a new more close up video and instead of trying to turn the screws with a slotted screwdriver use the right size socket on a handle. With the weedeater vibrating it's hard to stay on them. A drawing too on the video would help show which screws do what. I just came in from my workshop adding to another video I'm working on. It takes awhile to warm up out there. Burrr❄
Might want to check fuel. Fuel line. & fuel filter first.
Most of the time , you shouldn't have to.
Even if you get a brand new oem carb, it should come set.
I loaned a friend my blower once, he came back & said "I adjusted your carburetor for you"
!!!!???!@??!?
Last thing you want to hear.
Took me a long , long time to adjust it back
Thanks for your input. This was sitting for a few years outside under my old truck canopy. Moisture got to it and the fuel squeeze ball was cracked and leaking. I actually had another video cleaning it up and putting the new carb on it. The carb was not set from china. Plus the shutter spring was super weak so put the old carb one on. Worked great and still does👍
Using it today out in the backyard and it still starts right up and runs great👍
Great video, thanks. You may want to consider your dog's hearing too and lock him in the house while you're operating the trimmer. Just a thought!
Thanks for watching and suggesting to put Buddy in the house when using my power equipment👍 If he doesn't like something he just leaves the area but putting in the house is a good idea
Great job explaining! I just bought a 131 four mix off Craigslist. It's brand new but the guy left fuel sitting in the carb for over a year. It runs a little rough so I might need to rebuild the carb. Fresh gas and tuning the needles didn't help....bummer
Sounds like a good cleaning is in order. Usually carbs just need to be cleaned. If the gasket doesn't tear or Orings aren't cracked just used the old ones. Check the float to make sure it doesn't have fuel leaking inside or cracked. Check the needle valve to make sure it's not worn. If all good no parts required just cleaning. Lots of videos out there. Thanks for watching and please subscribe if not already.
Guess I need to add the carbs on weedeaters are sometimes not fixable and cheaper to buy another one on line like I did. From China and works great except for the throttle return spring is too weak. I just used the the old spring which was stronger
Very good
Thanks for watching
I'm gonna try this tomorrow. I'll let you know.
Thanks for watching, it works good. I had an earlier video cleaning the magneto. Hadn't used it for 5 years and sat outside under my canopy. It was all Rusty so cleaned it and bought a cheap 10 dollar China carb for it. Had to replace the shutter spring that was weak and use the old carbs one. Worked great👍
thanks bro, Ill give it a go
Thanks for watching. Plenty more coming👍 oh, I might add when trying to turn the adjustments while it's running use something that won't bounce around. Can't remember if a socket will work or not?
My ECHO starts first pull every time had it for 16 years . I miss it as its being used by my brother and I have his junk stihl. Needless. To say think I'll toss this one and go get another ECHO.
Thanks for watching. Never used an Echo before but my Stihl works great and my chainsaws. Both old Stihl units sat in the weather for 5 years and I cleaned them up and run great. Had to put a new Chinese knock off carb on the weedeater and was surprised it works great. Had to use the old throttle spring though. Chinese one sucked. Too weak
No thank you because of your time and my searching it runs really good now.so a big thanks to you for yojr video. And most of all your time.
Hey coach congrats on the chiefs superbowl win
No Problem, been a chiefs fan for years since my family was from there
good job help me out big time ,desmond in ireland
Would have liked to see what you were moving but fair enough
A close up would have been better for sure which I'm getting better at. I think a small socket on the adjustments would have worked better than a screwdriver too. Thanks for watching
If you fully seated(clockwise) the H. How many turns out?
I'm not getting much variation in rpm.
About a turn maybe a 1¼ turns out from seated.
Is this to lean?
I can't find much on a starting point for this particular trimmer (fs131) though most I've dealt with in the past are around one turn.
Any help would be appreciated I really don't want to blow it up. 😨
I think I saved the full instructions on file. I'll look it up to share with you after I find it.
photos.app.goo.gl/QeErqAS9nYXHPkAh7
Here you go Matthew, this is my notes on how to tune my weedeater on the video. It shows the complete process. This should get it running right. I suggest using something better than a flathead screwdriver on the high speed adjustment. Not like I struggled through with. Haha
@@TimsWorkshopTJY I have a spline adjustment tool that fits
Let me know how it goes. Thanks for watching Matt
Hi, what is the initial adjustment on the high and the low screw. How much open on both. Cannot get it right. Thanks
Thanks for watching. Someone else asked awhile back so here the word file link I did when I made this video. Hope this helps. Tim
onedrive.live.com/view.aspx?resid=9E619484E75F6C92!170&ithint=file%2cdocx&authkey=!AJTQ-7KOjUsYyrI
@@TimsWorkshopTJY Thank you very much sir.
So where is the link to the guy you got the instructions from
At the end of the video, Steve's small engine saloon link
Explain what your doing while your doin it nit after
Would have done that except the thing was so loud you would not have heard me talk. I since have a good mic on my newer videos which help. Thanks for watching.
need some hair around that hole grandad...........
Haha, yep that would help👍
Z
I didn’t watch because of the ads
Yep, I skip through them when I watch Vice Grip Garge and my favorite channels
I bet if there were some hair around it.... lol. Jk
Haha, trying to turn the screws with the motor running was not easy. I think the screw is also a hex head so a small socket would have worked allot better
@@TimsWorkshopTJY I laughed when I saw that because I did the EXACT same thing. I think you found it a lot faster than I did. Ha ha. Appreciate the video.
He like to trouble too much
Yep, it was hard to set with a slot screwdriver. I think the head of the screws I could have used a 5pt socket to make it easier to adjust👍
You got to be kidding
Nope, works great
@@TimsWorkshopTJY Am still confuse on how to adjust what you have just adjusted.can you please explain more so i can adjust my fs 38 trimmer
Hi,
Here's the link to the file:
1drv.ms/w/s!ApJsX-eElGGegSqU0Puyjo1LGMqy
Shared from Word for Android
office.com/getword
So when I did the video back when I typed up this so I would have reference for the sequence myself. Worked good and hope it helps you too. If you like please share with your friends to subscribe. Thanks
Too far away and too dark to see exactly what you are adjusting. Poor filming. Get closer!!!!
old video and since have done just that. learning curve but will someday redo all these old ones. Thanks for watching