the best. on my f250, my body mounts were coming apart in some areas, the s&b kit was backordered and they were able to get me a set within 2 weeks. the body lines are nice now. the truck rides nice, and no jarring in bumps or cab does not more like before. best for the money.
They are now listed for $499 for my 2014 super crew. I actually paid $699 plus tax and the next week or so they lowered the price as I still had them in the box sitting in garage. Great customer service to let me return them and repurchase. Everyone complaining about the price and went with the cheaper brands, Goodluck! I learned my lesson on going cheaper too many times and this isn't something to cheap out on. Especially if you're like me and DIY because it's a PITA to change when the cage nuts spin on you. Hopefully I will get to test them tomorrow when I finish installing "BUY ONCE , CRY ONCE''
I just put these on my 2012 Superduty....OMG what a difference they make. So easy to install these once you get the old ones off....which was a pain to say the least. Took me and a friend 4 hours.
I have 2011 Super Duty that needs the bushings replaced. Is the ride stiffer with the S&B and is there any additional noise from them? My current concensus was to go back with OEM @bwreynolds72
@@Icemax1970 The ride quality is the same as OEM and the silicone won't deteriorate like the OEM foam will. S&B also have a lifetime warranty on the mounts.
Wade . . Keep up the good stuff your helping a lot if folks both young and old learn and grow in the diesel groove thanks buddy . Got 2 myself 1 03 common rail 156000mi and an 2000 VP with 127460mi and get this the 2000 .... there's not a single crack on the dash...
On the website, it only goes to 2006 for ram 2500 and I need this set for a 2001 ram 2500. Do you know if there is a difference between the two. I’ve been trying to find out, but not having any luck. Thank you ✌🏽
Ill be ordering these soon, i cheaped out and went with daystars from amazon, and now i can feel vibration and almost like a knocking sound every bump and pebble i run over, driving me nutz
I have a 2011 F350 6.7 dually crew cab… i can feel a lot of bumps and sometime feels like we’re going to thrown out haha… I would’ve thought I would had to get airbags to fix the issue but are these cab mounts that good, that I will feel a big difference?
Wouldn’t these eventually compress like regular silicone does? I mean I’m sure they work great for a couple thousand miles but eventually everything will compress probably not break and dry rot like regular aftermarket choices but compress would they not? Idk can someone explain the science as to why this is stronger then your average quality silicone?
Good question. We make our own silicone in house. The formula and properties of the silicone that went into these body mounts are very unique and well tested. Compression deflection and compression set is what you are describing. You don't have to worry about our body mounts flattening out overtime
S&B Filters ok nice thanks for answering! Rereading my comment I didn’t mean to come off sounding like a complete critic I was just curious I definitely have to look into these more very fascinating thanks guys!
T.Money11 . There are different formulations for silicone and I’m sure theirs is proprietary but in general silicone will be softer and increased longevity vs OBD body mounts
Just bought poly. and Reused the original hardware (a mistake on a 92 f350with original body mounts). Poly is too hard in my opinion. Ive been looking into silicone. This imformative. Thanks!
@@Icutmetal thx . i will hold out hope for Si mounts, the fact mine are rusted/gone... should help a lot lol may re-pad the seat and see how things sit after all that.
depending how urethane is made it can be just as good or better than silicone at absorbing shock... the problem is most companies use the cheapest urethane made in the cheapest way possible... if ur ethane has bubbles in it, it was made wrong...
96 and 97 f250 stuff is 99% always compatible... I put mirrors and front bumper from bronco on my truck, and a minute ago ordered floor pans and body mount metal pans that are cross compatible, so I am fairly confident the mounts would have to work as well
Thanks for letting me know this product isn’t price competitive. As a consumer- one might not mind a small up charge for a superior product, but not 4 times the cost of the competition.
@@thoroughbreddiesel Please tell me what benefit I would receive in spending 4X the money when the "cheap", as you say, set will outlast the life of the truck and then some ????
Replaced mine on a 2016 F-350 extended cab, Gas S/A The ride is improved compared to the origional deteriorated FORD body mounts. FORDS BETTER IDEA. There's NO recall on the original mounts, such bullshit, a customer has to endure the COSTS of their failure, thus isn't a cheap upgrade, especially if you have to have FORD do it. I was quoted $1,700.00, oh yea, I didn't studder. Most likely all vehicle brands used this junk as original installation, hope not. This upgrade is so uncalled for if Ford would have tested this JUNK, but customers are bearing a big expense. Masonry Plus Florida
the best. on my f250, my body mounts were coming apart in some areas, the s&b kit was backordered and they were able to get me a set within 2 weeks. the body lines are nice now. the truck rides nice, and no jarring in bumps or cab does not more like before. best for the money.
They are now listed for $499 for my 2014 super crew. I actually paid $699 plus tax and the next week or so they lowered the price as I still had them in the box sitting in garage. Great customer service to let me return them and repurchase. Everyone complaining about the price and went with the cheaper brands, Goodluck! I learned my lesson on going cheaper too many times and this isn't something to cheap out on. Especially if you're like me and DIY because it's a PITA to change when the cage nuts spin on you. Hopefully I will get to test them tomorrow when I finish installing "BUY ONCE , CRY ONCE''
Glad we could make you happy!
@@thoroughbreddiesel will these hold up with fluid film undercoating?
I just put these on my 2012 Superduty....OMG what a difference they make. So easy to install these once you get the old ones off....which was a pain to say the least. Took me and a friend 4 hours.
I have 2011 Super Duty that needs the bushings replaced. Is the ride stiffer with the S&B and is there any additional noise from them? My current concensus was to go back with OEM @bwreynolds72
@@Icemax1970 The ride quality is the same as OEM and the silicone won't deteriorate like the OEM foam will. S&B also have a lifetime warranty on the mounts.
4 hours? I'd be real pleased if that's all it take me to cut/weld pans/mounts and replace mounts lol :) salt state PA
How have they been holding up ?
I put them on my 12’ super duty 3 years ago amazing difference
Glad they made a difference!
How have they been holding up?
@@cdsmit27 zero issues I would recommend them to anyone over the cheap OEM mounts any day. They are showing no signs of failure whatsoever
I want to know how it holds up over time - specifically, if it compresses too much.
Wade . . Keep up the good stuff your helping a lot if folks both young and old learn and grow in the diesel groove thanks buddy . Got 2 myself 1 03 common rail 156000mi and an 2000 VP with 127460mi and get this the 2000 .... there's not a single crack on the dash...
On the website, it only goes to 2006 for ram 2500 and I need this set for a 2001 ram 2500. Do you know if there is a difference between the two.
I’ve been trying to find out, but not having any luck.
Thank you ✌🏽
Give us a call at 859-737-4966.
Ill be ordering these soon, i cheaped out and went with daystars from amazon, and now i can feel vibration and almost like a knocking sound every bump and pebble i run over, driving me nutz
They need to do some for 2nd gen Dodge
Hello I have 2005 ram 1500 quad cab, will your 2006 fit my application for the body mounts ?
They don’t offer a kit for the 05 trucks.
For the duramax guys s&b says they are about a month out. Cant wait was just about to buy a set but couldn't find something that interested me.
I hope I can find some of these for my E350 van!
Just put them in my 2011 F350 6.7 👍 worth the money
Glad to hear it!
I have a 2011 F350 6.7 dually crew cab… i can feel a lot of bumps and sometime feels like we’re going to thrown out haha… I would’ve thought I would had to get airbags to fix the issue but are these cab mounts that good, that I will feel a big difference?
Will these replace the stock bushing if my truck has a leveling kit?
Yes as long as the truck doesn’t have a body lift, these are the bushing for you.
Are they available for 07 Ram 2500 with 5.9 Cummins?
If there’s a set for an ‘03-‘05 Diesel Excursion will the same set work for ‘00 V10?
Hey. I’m reviviving a Nissan G60 cab chassis and need new body mounts. Can S&b do a kit for the G60? 1966 model. Cheers Mick
@@GPatrolUte you should ask s&b instead of some guy asking another question
Wouldn’t these eventually compress like regular silicone does? I mean I’m sure they work great for a couple thousand miles but eventually everything will compress probably not break and dry rot like regular aftermarket choices but compress would they not? Idk can someone explain the science as to why this is stronger then your average quality silicone?
Good question. We make our own silicone in house. The formula and properties of the silicone that went into these body mounts are very unique and well tested. Compression deflection and compression set is what you are describing. You don't have to worry about our body mounts flattening out overtime
S&B Filters ok nice thanks for answering! Rereading my comment I didn’t mean to come off sounding like a complete critic I was just curious I definitely have to look into these more very fascinating thanks guys!
@@t.money1196 I didn't read it that way. We appreciate your interest and glad you asked!
T.Money11 . There are different formulations for silicone and I’m sure theirs is proprietary but in general silicone will be softer and increased longevity vs OBD body mounts
@@SBFilters anything for the 19+ Cummins? These body mounts are complete trash and I have horrible clunking daily.
Can I use these in conjunction with a 1.5” body lift? 06 2500 Suburban.
I bet these are so much nicer than the urethane on my OBS. I’m sure they’re worth a kidney or two as well! Man I want those!!!
About to try their kit meant for NBS on my OBS. We've dealt with shit bushings for too long.
How much does this kit cost for 2012 ford F-250
$399 for a regular cab. www.thoroughbreddiesel.com/2012-ford-f250/81-1002/
hello do you have for 2017 ram 1500
Give us a call 859-737-4966.
Do you have any recommendation for a 97 Dodge 2500HD Gen2 Club cab body mounts? Ride is horrible and cab and bed starting to not align to the eye.
There are some kits out there for the 2nd Gens but we don’t carry any yet. Hopefully S&B will have them soon.
Just bought poly. and Reused the original hardware (a mistake on a 92 f350with original body mounts).
Poly is too hard in my opinion.
Ive been looking into silicone. This imformative. Thanks!
Polyurethane can be made in hard or soft compounds... maybe not for the ones you buy.
I need these for my 96 F 350 !!!!!!
Coming soon!
I had a 1997 F350 with 41k original miles. Great old school truck, but the only way to improve that ride was to replace the truck!
@@Icutmetal did you try Si mounts or an air-ride seat? :) I have the 250 and the rear is stiff, front isn't unbearable thx
@@galehess6676 No.
@@Icutmetal thx . i will hold out hope for Si mounts, the fact mine are rusted/gone... should help a lot lol may re-pad the seat and see how things sit after all that.
depending how urethane is made it can be just as good or better than silicone at absorbing shock... the problem is most companies use the cheapest urethane made in the cheapest way possible... if ur ethane has bubbles in it, it was made wrong...
We have found these last the longest.
Do they make these the obs Ford's?
Coming very soon! Thoroughbred should be able to get you come in January 2020!
S&B Filters good to hear, mine are SHOT. My truck is a 97 so at this point ANYTHING is better than what’s left of them now.
S&B Filters do you guys already make them for the ford OBS?
@@harasdf112 500$
Are the mounts for the GM 2500 interchangeable with the Hummer H2?
Finally, so much better than the daystar garbage
They are pretty nice! Everyone loves a smooth ride. 😉
I need these for my 08 superduty. The constant clunking is driving me nuts.
Give us a call 855-917-6795
I would like to get those for my 05 Excursion! 😎
We'll be happy to make that happen!
did you ever get these replaced on your Excursion? What did it cost you if you did...
@@idatoebear1865 No I haven’t gotten around to it yet.
Offered for a 2005 dodge 2500 SC 5.9?
Nothing for the 2005’s just yet.
How you doing? Are they available for 2000 tundra????
Good. How you doin? Not yet, but S&B is always looking to expand their offerings.
Looking to replace some on my 95 bronco. Any products for it?
96 and 97 f250 stuff is 99% always compatible... I put mirrors and front bumper from bronco on my truck, and a minute ago ordered floor pans and body mount metal pans that are cross compatible, so I am fairly confident the mounts would have to work as well
Man I wished I'd seen these before i installed that daystar crap. These are about 5 hundred bucks but I bet they're alot smother ride, damn it man!!!!
thanks for posting as i consider for my 7.3 i am leaning toward spending the $$
Hi, are they available for the 3000 Tundra???
Not yet, but S&B is always looking to expand their offerings.
do you make a lot for 79 bronco
Do they squeak?
No
That’s what she said
Easy install did them in 3hours no lift
available for the 2017 Ford Super Duty yet?
Not yet but my guess is that will happen soon.
Can you get these type of body mounts for 2001 F350
Coming very soon
@@SBFilters okay I'll sit tight until you get it in I can't wait thank you
For dodges 🙌🏻🤷🏻♂️
For my LBZ Duramax🤷♂️
About a month out until we release these
They dont make those for the expedition 💔
Silicone for well over $500 per set.
Polyurethane 1/4 of the cost and will still outlast the life of the truck!
If you just want to replace the mounts cheaply then this isn’t the product for you.
Thanks for letting me know this product isn’t price competitive.
As a consumer- one might not mind a small up charge for a superior product, but not 4 times the cost of the competition.
7 years into my 2013... metal on metal. How will the stock outlast these?!? You need to replace it again, cost plus labor. No thanks to oem.
@@thoroughbreddiesel Purchased & installed (myself) the polyurethane bushings. Total Cost: $170 w/all hardware - Labor: self install - New ride: Excellent
@@thoroughbreddiesel Please tell me what benefit I would receive in spending 4X the money when the "cheap", as you say, set will outlast the life of the truck and then some ????
SERIOUSLY???? $700+ for body mounts!!!!
I used polyurethane mounts for under $200 (including new hardware) and the truck rides GREAT!
Brand? Where you buy them from?
That great ride will only last about 3-4 yrs if your lucky, then you'll be replacing them again. Good luck.
Replaced mine on a 2016 F-350 extended cab, Gas S/A
The ride is improved compared to the origional deteriorated FORD body mounts.
FORDS BETTER IDEA. There's NO recall on the original mounts, such bullshit, a customer has to endure the COSTS of their failure, thus isn't a cheap upgrade, especially if you have to have FORD do it.
I was quoted $1,700.00, oh yea, I didn't studder.
Most likely all vehicle brands used this junk as original installation, hope not.
This upgrade is so uncalled for if Ford would have tested this JUNK, but customers are bearing a big expense.
Masonry Plus
Florida
98 SILVERADO?
Yeah, but the won't warranty their product if not installed by a "qualified" technician. What the hell is qualified?
S&B has so much to say in the comments I guess they should have done the commercial for this product instead of having someone else do it.
Just trying to help out!
You don't like us?
@@thoroughbreddiesel it's not about liking someone it's about how much money you spend how long they will last
@kitchen3050 is my sandwhich ready yet.....
Can these be made for a kenworth w900?
Not yet, but if its something that you know of a lot of failures let us know and maybe it is something S&B would consider producing.
@@thoroughbreddiesel would you consider making me a set?
S&B would have to do that.