I've always used front brake and no one ever told me to do it kinda funny it just always felt right to use the front brake instead of the back i don't tbink I've ever tried using the back brake. But thats awesome i was doing the right thing the whole time even confirmed by a pro abd that's cool he gave u such good advice
I sometimes use the rear brake to slide the back wheel into some shallow ruts but I agree that the front brake is a lot more efficient for straight line braking
I think they did that on purpose because the kick starter hits the peg. It happened to me with my works connection titanium foot peg on my 2014 kx450 because the stock ones are skinny.
I noticed some comments asking about a price on this bike, so that got me thinking how much would this cost? Using ONLY off-the-shelf parts (so no factory, works parts "unobtanium"), also no engine modifications (clutch, tranny etc) I did some window shopping, tried to find every visible part I could think of, please feel free to add more if I missed anything! (Everything in GBP) 2018 KX450F - £6,999 KYB Suspension (Fork + Shock combo) - £4,500 Pro Circuit Ti6Pro - £979.99 Pro Circuit Airboot - £599.99 X-Trig ROCS Clamps - £409.99 D.I.D ST-X Rims ONLY (Stock spokes and hubs) - £419.99 Dunlop MX3S Front + Rear Tyre - £115.99 Renthal Fatbar - £66.95 Renthal Full Waffle grips (soft) - £10.99 ARC Levers (set) - £175.99 Hinson Clutch Cover - £182.32 Hinson ignition Cover - £399.95 Renthal Ultralight Sprocket set - £69.95 D.I.D 520VX2 Chain - £77.95 Acerbis plastics GREEN - £104.99 D'Cor Visuals full graphics - £129.95 D'Cor Visuals seat cover - £69.95 Total: £15,313.94
Casey Lee you can add a c4 stage 3 motor for 4500 cash and also the vortex cdi with tune for 900-1000, go top end hubs ( not sure on price ) clamps are 1100 and it just keeps going
Fork and shock are "A" kit... Bigger diameter fork tubes and shock slide. I believe they are 51mm tubes instead of the stock 48mm. That suspension is gonna cost you 10,000...
You can buy a bike real close to this. Talon hub/ excel rims for 1,500 Pro-curcuit can do the exhaust and head mods. Stage 2 hotcam and vortex ignition will get you close to the power this bike has. Expect to pay about 30, 000 total and it will be close to.this bike but its still not a factory bike
A clear clutch cover might be kinda cool. A gold anodized swing arm like 79 KX. Polish radiator end tanks. More green less black. Overall awesome ride.
People hating on 4 strokes in the comments don’t know this bike make more power and is better in every way than even the old 500 two strokes. (Idk why people care different strokes for different folks😏😉😂)
Heh, heh, compare to the F21M Kawasaki I was sponsored on in late '67. That was some ride with a warmed over street bike engine and poorest ergonomics for the rider.
It's made out of titanium, which can be "anodized" either by controlled heat with a torch or through an electrolytic bath with precise voltage control if a more uniform result is desired. In the case of heat, the color is simply the result of oxidation which varies depending on the temperature the metal reaches when in contact with oxygen. Light yellows = lower heat, blues and purples = greater heat. Of course some coloration will result from the temperature of the exhaust gas itself. You will notice a similar discoloration on the foot pegs as a result of the heat associated with welding the assembly together.
Are those air forks on the Kawi? I was surprised seeing air forks on the factory Yamaha's raced in Europe. No way they work as good as the spring sss. Maybe lighter.
in the ballpark of $100k+ full suspension these guys run are near $20k in the factory brackett. and the motor work is over 15K (malcom stewart when funding his privateer effort spent 30k for three motors.....and that without the factory workings ) then the prive of titanium bolts and all that with carbon fiber, factory spec tires and exhuast, plug the factory ecu.....100k to 250K
For sure! Jgr does builds though for public around 25k-50k you could get exactly what peick and them run since they do everything in house. Jgr is awesome. But yeah from the “factory” the price is almost immeasurable. But if they DID sell it, it be high thousands
tomac kyb rear shock looks like the same 1 he used when he was with honda is so beat and chucks missing but must found sum he likes on honda wish he go back ..also id like to know what transmission numbers he runs cuz his bike sounds like he hardly rev's it in the turn compard to the other riders
Has to be 1 of the best looking bikes
James McCauley hello l have an idear should we share it pse ...
RedBull KTM has the best looking bikes
gamejr84 so you broke the world record by double? Hope your not serious
@@jaredleavermx94 Nahh. The new black on blue YZs are the best look imo. The classic monster energy kawi looks amazing too
That bike is a beast! Tomac definitely slays! 💯💯
Hhhhhhyyyyccvvhchchcchxncyhdbcgdfgdhehfjdjdyvhdvhdbcbxhc ❤❤❤😅😅😊😊😊❤❤I ❤am 😂❤❤❤❤❤❤❤❤
😆😆😆😆🤙😆🤙😁🤘😁🤘🤚😁🖐😁🖐😁👍👍😁😁🤚🙏😄😄👐👐👐🙂😷👎👎😊😊👍👊🙂😆🙂😉😉😉👍👍👍👍👊👊🤲🤲🤲🤟👆👆🤟🤟☝☝☝☝🤌🤌🤌🤌🤌👋👋😁🤚😆👊😃👊👊😄😄🙏👐👐👐👐👐👐👐👐👍🖐👍👍😇👆👆👆😁😆🙏🤲🙏🤲😆😆🙏🙏🙏😄🤚🤚😁🤙😁😁😆😆👊👊😷😷😷😷🤚🤚👊👊👊🤝🤝🤝🤝🤝🤝🤝👊👊👊👊👊🤛🤛🤚🤚🤚😆😆🙏🙏👐😃👐👐👐👐😃😃😃👐👐😃👍👍👍👍👍🖐🙂😷😷😷😄😄😄😄😄😄😄😄😄😃😃😃👐😃👆👆👆👆👆👆👆👍🤚🙃🤝🤝👊👊👊👊👊👊🤲🙏👊👊👊👊👊👊🙏👊👊👊👊🖐🖐🖐✋🖕🖕🖕🖕🖕🖕🖕😊
Its probly not that fast my grandma could ride that bike
@@loadthebowl eh idk, I am the dirt bike and no grandma has passed me yet.
@@wazzup2987 my grandma would throw a rooster tail at you
eli tomas is my favorite rider. i mean like my guy has some skill! when i get older i’m going to be like him
(i’m 11 btw)
Thats is the right attitude... Tank Doss 2027 motocross rookie and champion of the year.
YoungGun-RickyAnzley thanks! i have a kawasaki 110L with a fmf pipe and i can ride like its a 450 lol. love that guy! he’s my baseball number too!
Same dude
Tank and Maverick....ill be looking out for you guys in future...ride for fun and race for the win!
@@rocket41792 ok thanks dude I appreciate it I ride a trail Honda 80 cc
My no.1 favourite Motocross rider Eli Tomac❤️,
Wow - what a masterpiece. That thing is hardcore. All the real magic is hidden inside the engine
1keykneedeep and suspension
I've meet Eli in person he said the best tip he can give for a rookie is to use the front break more than the rear
did you ask why? maybe because you carry more speed? as apposed to dragging that back brake? thanks for the comment
Because you have way more stopping power with the front brake.
I've always used front brake and no one ever told me to do it kinda funny it just always felt right to use the front brake instead of the back i don't tbink I've ever tried using the back brake. But thats awesome i was doing the right thing the whole time even confirmed by a pro abd that's cool he gave u such good advice
I sometimes use the rear brake to slide the back wheel into some shallow ruts but I agree that the front brake is a lot more efficient for straight line braking
Eli is right. I've been trained and they said you use your front brake more
That green carbon cap looks Great!! Mitch’s special treats:)
Far from stock young Grasshopper.
If only Eli can keep that gorgeous beauty off the dirt
I'm in love with motocross, hopefully one day have like this one 😘
Boo boo booooooooooooooooooooooooo
Yeah right, about 25k might get u one
You give galaxies that machine😍👏👏👏
Syukur syukur bisa order ❤️
What a sick bike 👍
At 4:00 you can see the right titanium foot peg is bent along the back row of spikes
I think they did that on purpose because the kick starter hits the peg. It happened to me with my works connection titanium foot peg on my 2014 kx450 because the stock ones are skinny.
I noticed some comments asking about a price on this bike, so that got me thinking how much would this cost?
Using ONLY off-the-shelf parts (so no factory, works parts "unobtanium"), also no engine modifications (clutch, tranny etc) I did some window shopping, tried to find every visible part I could think of, please feel free to add more if I missed anything! (Everything in GBP)
2018 KX450F - £6,999
KYB Suspension (Fork + Shock combo) - £4,500
Pro Circuit Ti6Pro - £979.99
Pro Circuit Airboot - £599.99
X-Trig ROCS Clamps - £409.99
D.I.D ST-X Rims ONLY (Stock spokes and hubs) - £419.99
Dunlop MX3S Front + Rear Tyre - £115.99
Renthal Fatbar - £66.95
Renthal Full Waffle grips (soft) - £10.99
ARC Levers (set) - £175.99
Hinson Clutch Cover - £182.32
Hinson ignition Cover - £399.95
Renthal Ultralight Sprocket set - £69.95
D.I.D 520VX2 Chain - £77.95
Acerbis plastics GREEN - £104.99
D'Cor Visuals full graphics - £129.95
D'Cor Visuals seat cover - £69.95
Total: £15,313.94
Casey Lee you can add a c4 stage 3 motor for 4500 cash and also the vortex cdi with tune for 900-1000, go top end hubs ( not sure on price ) clamps are 1100 and it just keeps going
I know some of these bikes reach around 20-25k normally. There was a fully built 2016 CRF450R making 67hp the showed full detailing on the build.
Fork and shock are "A" kit... Bigger diameter fork tubes and shock slide. I believe they are 51mm tubes instead of the stock 48mm. That suspension is gonna cost you 10,000...
You can buy a bike real close to this. Talon hub/ excel rims for 1,500
Pro-curcuit can do the exhaust and head mods. Stage 2 hotcam and vortex ignition will get you close to the power this bike has. Expect to pay about 30, 000 total and it will be close to.this bike but its still not a factory bike
Forgot to add the real cost of A class suspension. And we haven’t started doing all the smaller stuff and the all the ti bolts that’ll run a few k
amazing work on the bike sir
God dayum thats one sweet looking bike 👌👌
A clear clutch cover might be kinda cool.
A gold anodized swing arm like 79 KX. Polish radiator end tanks. More green less black. Overall awesome ride.
Eli's my hero
Tomacs bike is sick
Eli tomac the best
I like it... how much like this boss because i'm from indonesia...
Now....just imagine if it were a good old KX 2 stroke works bike........sick bike either way
i wish there was a 250sx class. Bring ur own 2 banga. How amazing!
Ahhh....the good old days....still got my kx100 and my banshee, so lifes good..
All it needs is a kx500 motor and I'm in heaven
Sick bike for the fastest guy out there
To clean the bike what do u use?
Amazing all these Factory bikes are!
Jesse Detrick m
Jesse Detrick z
Cio
😎
Tomac is very cool
Full extras. Una nave esa kx 450F
How many gears do race bikes have? Are they like normal factory bikes?
Badass machine 👍
Nice vid guys your vids are the best
Price
what torque do you use on your tire valve caps? asking for a friend
snowshred4life Hahahahaha
How much do the frame, the wheel-rims, the front forks and rear swing-arm weigh? Would it be possible to make them from carbon fiber?
wowwwww ilove this bike,
Perfeitamente linda😍😍😍😍
This bike is a 2.5 stroke has to have oil mixed in the gas but still the 4 stroke noise. That's how he clears the big gaps
Looseunit666 666 how stupid are you
People hating on 4 strokes in the comments don’t know this bike make more power and is better in every way than even the old 500 two strokes. (Idk why people care different strokes for different folks😏😉😂)
A built 500 cc two stroke makes around 80 how and does a ten second quarter mile. A 450 has never come close to making 80 hp
Yez cool
🏁
Me indian
Eli’s mechanic⚙️🔧 good work
Amazing
Can someone tell me how much is this bike?
aqua I could be wrong just wild eating maybe 20-30k
So many trick parts I’d love to have for mine.
Motor impian gw...😍😍😍
Stupenda 😍😍😍
Nice!
Kawasaki is the best, lovee kawasaki i hope have this bike.Amiiin.
Heh, heh, compare to the F21M Kawasaki I was sponsored on in late '67. That was some ride with a warmed over street bike engine and poorest ergonomics for the rider.
Give us a total cost of this bike!
I like motor cross
Cool bike...
Linda moto ,Eli tomac um monstro das pistas
That bike is too lit🤣👌😍
could someone tell me how they get the pipe looking like that?
It's made out of titanium, which can be "anodized" either by controlled heat with a torch or through an electrolytic bath with precise voltage control if a more uniform result is desired. In the case of heat, the color is simply the result of oxidation which varies depending on the temperature the metal reaches when in contact with oxygen. Light yellows = lower heat, blues and purples = greater heat. Of course some coloration will result from the temperature of the exhaust gas itself. You will notice a similar discoloration on the foot pegs as a result of the heat associated with welding the assembly together.
Anyone else see the green tinted carbon pipe tip?
J Blob soooo sickkk
J Blob 🤢🤢
😒 don’t ask dumb questions
Nice bike
Sweet bike bro...
He didn't mention the boyesen supercooler, and supercooler elbow. Those are a major part to keeping the bike cool.
I'd be curious to know the weight of this bike with all fluids and a full tank
220
Eli tem o top dos tops
Nice brow
Linda moto ,meu sonho é um dia ser dono de uma máquina dessa seria incrível , sonho todos os dias ,
All bikes are fun. Dream on.
OK สวยมากครับ อยากได้ราคาเท่าไหร่ครับ ดูแล้วถูกใจ ok ครับ
Wish he would go into technical specs instead of just rattling off the brand name of each part.
What its price
Being a factory works bike I'm sure he doesn't wanna give away to many details
Now next year we gotta get one but for his Yamaha
I run full waffles...used to run half...but once I went full I never have gone back.
Are those air forks on the Kawi? I was surprised seeing air forks on the factory Yamaha's raced in Europe. No way they work as good as the spring sss. Maybe lighter.
Desert Mountain Preppers says in video they are spring kyb sss forks and shock
thanks, I can't watch this clips worth a crap...still on dial-up speeds out here in the bush.
What its price
Waowww amazing
How much is this bike
Mewaaahhh 😍
Tentu
Sir about the gear size
What would you say the top speed for this bike is ?
90
Does anybody know the exact fat bar he runs?
El Hombre be like, "give me that bike. Look, the throttle is here."
good
this was Model 18 ?
Yes.
Kapan ndue nginiki ndae nek koyok numpak jaran😥😥😥
Which bend of bars does Eli run
Was wondering the same thing!
Brandon Heath ya ive asked the question a whole bunch of times and know one gives up an answer is it a secret lol
I was at A1 and shoulda asked one of the guys in the pits lol. Literally standing 8 ft from the bike... question slipped my mind
Brandon Heath lol guess ill just have to make sure i ask at salt lake race
Please find out and report back!
I'd kill for this bike
My.favorite.bike
Sorum kahape hai
To die for.
Naughty bike
Kawa❤🔥
ស្អាត
Very impressive but at the end of the day it’s still a 4 stroke
David Miller and still better than any bike you have lmfao
That's what makes it good 450 4 banger wins any day any brand any year I'll even take an 01 yz426 over a 2 stroke lol
@CENTRAL CALI KNUCKLEHEAD agree 100
..... your point?
2 smokers all the way
How much to duplicate?
TheScoobysnack08 Probably like 50k lol
Anyone knows an estimation of the price?!
in the ballpark of $100k+ full suspension these guys run are near $20k in the factory brackett. and the motor work is over 15K (malcom stewart when funding his privateer effort spent 30k for three motors.....and that without the factory workings ) then the prive of titanium bolts and all that with carbon fiber, factory spec tires and exhuast, plug the factory ecu.....100k to 250K
Damm !! Thats crazy thanks for the info
For sure! Jgr does builds though for public around 25k-50k you could get exactly what peick and them run since they do everything in house. Jgr is awesome. But yeah from the “factory” the price is almost immeasurable. But if they DID sell it, it be high thousands
subscribe my youtube cenel
please help me buddy
i have a mini 50cc kawasaki and my favoratei rider to
Sensacional
need those peg guards!
Fuck that give me the whole bike.
Good for making beer runs too
Muito show
So what is modified? Just a bunch of bolt on goodies. Whats inside??????????
Epic
Aku suka eli tomac
Did you see bent footpeg teeth on the brake side.
งามคับ
Haw Much is this Bike??
Necunoscut NECUNOSCUT dont even ask about it.
So Barcia is just that much better that the other riders? And Webb is just as skilled as Tomac?
If Tomac was consistent he could be the next Carmichael.
drewcifer24 нет
Barcia has nothing on tomac
anybody else notice the teeth on the right footpeg were pent?
tomac kyb rear shock looks like the same 1 he used when he was with honda is so beat and chucks missing but must found sum he likes on honda wish he go back ..also id like to know what transmission numbers he runs cuz his bike sounds like he hardly rev's it in the turn compard to the other riders