One of the better tutorials that I've watched, kudos. On some of the other videos they wet sand after using 2000grit sand paper and Meguiar's Ultimate Compound to create the glossy appearance, then they either left it or put on a clear coat.
Thank you very much, I appreciate that. I've also heard that people wet sand them but I don't have any experience doing it that way. As far as I know it turns out great though.
Just because he didn't sand doesn't mean it's not necessary. When you paint its always a good idea to scuff up the surface so the paint has something to grab. Watch a few other videos this is the second worst that I've seen. The way he did it it's not gonna last.
Hey bro! Such a timeless video!! Been her 3 or 4 times in the years double checking 😂 after about 3 years, i notice a fade! A little gas ams cloth remove it perfectly and ready for a new coat!!
Also no need to heat up the can ,it changes the format of the paint. Also try to overlap the paths, as in a blending technique. Before anyone hates, I did body work and detailing for over 25years. Doing them off the car is easier and overlap for even coverage. Just just helpful advice man. Overspray can still travel far. Keep the can 6plus inches away. It looks good over all just sharing some info. Nice touch leaving the reverse lights clear
eric muraca Heating the can is actually a great idea-you just don't want to go too hot. The reason rattle can paint jobs looks horrible most of the time is because the pressure in the can is inadequate. You need good pressure to help the paint lay down. Heating the can helps build that pressure. Again-not too hot as you don’t want to degrade the integrity of the paint-which you mentioned. It also appears that he did overlap his paths. He did a great job overall. He could now wet sand and polish for a true mirror finish. I’ve also been in the body shop business and have been customizing/painting/detailing cars and motorcycles for over a decade.
GameOfInches Both. 1500-2000 grit wet sand after the last coat of night shades-I did 4 coats (I think I still have a video up on my channel). It’ll smooth it out perfectly then 4-6 coats of clear. Wet sand clear with 2000 grit again only after the final coat.
Very cool, don't know how many times I'll watch this, love your color of your car, really accentuates the vht nite shade, hoping I get the same look on my car, love it!
nice look. I did my impala and i used 2000 fine grit sand paper. it just makes the nightshade stick better so you can apply thinner coats for a more longer lasting finish.
these turned out great , Next time the tails on most car's are way easier to remove than worrying about taping the car off then you can close the door and not worry about overspray. I only need a slot screw driver to remove all the tail lights out of my challenger
Does that last a long time I want to do that to my Honda civic taillights they are very hard to tint because of the shape of my tail light I went to get a estimate on the cost for the to tint shop to do it $220.00 is it easy to do it ur self nice video
thanks for the tips man! I really appreciate you showing what it looks like when braking, it's very hard to find those kinds of videos on YT xD thanks again !!
Yup, but my taillights still had a little nightshade on them from years ago when I first tinted them. If they had never been tinted I probably would have done 3 coats of nightshade
Looks nice. That's only two coats?? (one base, and one semi-liberal?). They got really dark - want to try it, but don't want to go too dark that I get pulled over..
I just tried that today man I did not do well at all alot more difficult then I thought and its cause my optima has lights that are to bubbled too used this vht and it came out way better then the wrap and alot less stress lol
@@franklinhernandez5255 yea I'll be trying that this week, and my tails just have 2 thumb screws and they pop out, will be much easier with them removed🤟
Awesome video man, this gives me tips on how to use it correctly, i rather use this than plasti dip not only plasti dip darker but the nice finish on vht nightshade is professional and the glossy is what i wanted, not a big fan of matte finish for lights
Great Video!! The only recommendation, you should have covered your whole car before paint. You will have very small particles of overspray that is from the clear and vht all over your car that will need to be removed.
Personally, I've had multiple vehicles with tinted taillights and never had any trouble with the police. On the can it says "off-road use only" but I mean come on... lol
Just saw this comment lol sorry this is really late. I don't know if you sprayed yours yet, but just lay down fairly generous coats of the clear and you'll be good. You got this
No I haven't done it yet thanks for the response! I may have got the wrong clear coat tho, I got the rustoleum kind, but I don't like the nozzle I want one that sprays in a vertical pattern so it's even
Oh and one more thing do you remember how long it took you and how much time in between coats you took? I may have to go to my paps garage because my house doesn't have one and stuff will blow all over the tail lights
3 coats on front headlights it wouldn't do much for protection in Canadian winters with salt kick'in into it as every year I have to refinish my after market chin and side scoops! I find that Duplicolor is good for areas not being exposed to harsh elements but against salt it's nowhere as tough as the industrial grade clear coat the shops use!
Thought I got it at auto zone. But I just looked it up to double check and it didn't show any results. So I wanna say maybe it was Advance Auto Parts ?? ... don't quote me though lol
They're Voxx Monza's. I actually got them off craigslist for $200 and just re-painted them myself so it wasn't a bad deal lol. I've had them for a while though so I'm looking to get new wheels this summer
Oh damn, that's a hell of a lot better than a new set for 700. They just need a repaint black or were a different color when you bought them? Also, 18s?
Awesome, thanks for the replies! I think I'm going to do just that with the stock wheels until I can get myself a pair of better rims. Just kind of on the fence of what to do, I have a nautical blue Tc so it's a little difficult coming up with decent looking ideas. Not to mention I'm still very new to the whole car scene but the Tc seems like a pretty decent car to learn and play with. Good luck with everything.
Hey absolutely, any time! I appreciate it. If you ever have any questions feel free to ask. And that's exactly what I did before I found these wheels, I just painted the stocks
Nahh it doesn't peel off. But when I got overspray I just put a little rubbing alcohol on a microfiber and it took it off easily. Or like Tom said, goof off works as well I guess
Yessir 2 coats nightshade and 3 coats of clear. That's just what I did personally. My lights had been previously tinted and they had just faded over the years. So since they were still a little darker than stock I only went with 2 coats of nightshade
Hey thank you very much! It is a little intimidating, but trust me after you do it once, and at least get a feel for the technique, it's really easy. If you want them on yours i'd say go for it!
Best tutorial I've seen for blacking out tail lights. And no sanding was needed, pretty awesome! Thank you 😀
Ayyy I appreciate it my man. You're very welcome!
What brand clear coat did you use? How long did it the paint last before it faded? Thanks!
I went through 8 videos to find somebody who shows how the light comes through. Thank you for your great tutorial and thoroughness! 👍
Clean Simple Best video for the VHT night shade I've seen. Been watch tons the past weeks.
One of the better tutorials that I've watched, kudos. On some of the other videos they wet sand after using 2000grit sand paper and Meguiar's Ultimate Compound to create the glossy appearance, then they either left it or put on a clear coat.
Thank you very much, I appreciate that. I've also heard that people wet sand them but I don't have any experience doing it that way. As far as I know it turns out great though.
That came out really clean looking!
Appreciate it man!
Great video and straight to the point. I'm tinting my tails tomorrow but wasn't sure about how nightshade would look. Thanks for the vid
ive watched 20 videos on this for my 6th gen SS and yours are the best everyone else had to sand them to make em look good.. nice vid man
Brian Knox his came out good but you do have to sand them for best adhesion. If not. Tint will most likely start chipping in the future
@@eliasflores8794 i just sanded the edges so it doesnt start peeling around them, and its held up well
Just because he didn't sand doesn't mean it's not necessary. When you paint its always a good idea to scuff up the surface so the paint has something to grab. Watch a few other videos this is the second worst that I've seen. The way he did it it's not gonna last.
Thanks for this video! 4 coats of Nite Shade and 3 costs of ClearCoat. Perfect.
Hey bro! Such a timeless video!! Been her 3 or 4 times in the years double checking 😂 after about 3 years, i notice a fade! A little gas ams cloth remove it perfectly and ready for a new coat!!
@@Runitrich Hey I appreciate that my boy 👊🏼 Mine ended up fading as well after a few years lol
Looks fantastic dude. I'm trying to gather the guts to do this to my new WRX lol
Me too haha
I saved this video. Doing it this way with that clear coat mine lasted almost 4 years in the Florida sun before I had to redo them.
The cling wrap is the the best idea ever!
We have the same car color 😇!! Thanks for the insight I'm so stoked to tint my tail lights
Sara Lynn careful how dark u go but you can always buy brighter bulbs
Also no need to heat up the can ,it changes the format of the paint. Also try to overlap the paths, as in a blending technique. Before anyone hates, I did body work and detailing for over 25years. Doing them off the car is easier and overlap for even coverage. Just just helpful advice man. Overspray can still travel far. Keep the can 6plus inches away. It looks good over all just sharing some info. Nice touch leaving the reverse lights clear
eric muraca Heating the can is actually a great idea-you just don't want to go too hot. The reason rattle can paint jobs looks horrible most of the time is because the pressure in the can is inadequate. You need good pressure to help the paint lay down. Heating the can helps build that pressure. Again-not too hot as you don’t want to degrade the integrity of the paint-which you mentioned.
It also appears that he did overlap his paths. He did a great job overall. He could now wet sand and polish for a true mirror finish. I’ve also been in the body shop business and have been customizing/painting/detailing cars and motorcycles for over a decade.
@@SpeedCultureStudios should you wetsand/compound after the niteshade is on, as well as the clearcoat? Or just after the clearcoat?
GameOfInches Both. 1500-2000 grit wet sand after the last coat of night shades-I did 4 coats (I think I still have a video up on my channel). It’ll smooth it out perfectly then 4-6 coats of clear. Wet sand clear with 2000 grit again only after the final coat.
@@SpeedCultureStudios link of the video ?
Cesar Flores sorry I don’t have it up anymore-unlisted. I can’t get to it from my phone but if I remember later I’ll dig it out on my computer.
I love the vht night shades when first applied, but always fade over time even with generous clear coats. car looks good though!
Thanks for the video bud! Thanks for showing how it looks like with the breaks on after great video
Great Video! Best finish with this product I’ve seen so far.
much better than expected. thats cleeean
Very cool, don't know how many times I'll watch this, love your color of your car, really accentuates the vht nite shade, hoping I get the same look on my car, love it!
How long did you wait after the nightshade to do the clear coat
nice look. I did my impala and i used 2000 fine grit sand paper. it just makes the nightshade stick better so you can apply thinner coats for a more longer lasting finish.
Ohhhh that's a good way to go. I probably should have sanded mine a little bit before hand
Great demo video. Planning to do mine next
Cleanest tC I’ve seen
thank you for showing the brake lights after the tint
Good work bro! Looks great without sanding. Definitely going to try to this out
Carlin Hatcher d
If you wet sand with 2000 grit and use compound and polish its going to come out even better! You did a great job though!
these turned out great , Next time the tails on most car's are way easier to remove than worrying about taping the car off then you can close the door and not worry about overspray. I only need a slot screw driver to remove all the tail lights out of my challenger
Does that last a long time I want to do that to my Honda civic taillights they are very hard to tint because of the shape of my tail light I went to get a estimate on the cost for the to tint shop to do it $220.00 is it easy to do it ur self nice video
Dude you killed that!👍🏻
thanks for the tips man! I really appreciate you showing what it looks like when braking, it's very hard to find those kinds of videos on YT xD thanks again !!
Hey thank you, you're very welcome!
AdamJP so u just used 2 coats of the nightshade, then 3 of the glossifier
Yup, but my taillights still had a little nightshade on them from years ago when I first tinted them. If they had never been tinted I probably would have done 3 coats of nightshade
AdamJP they didnt have the glossifer u used will any of them work
Oh yeah you don't have to get the exact same one. Any clear coat is fine
nice looks clean what type of Clear Coat is that mine never comes out smooth
very nice, your car looks amazing. can't wait to do this to my crown vic!
Right on, thank you!
Looks nice. That's only two coats?? (one base, and one semi-liberal?). They got really dark - want to try it, but don't want to go too dark that I get pulled over..
Hey man awesome video! Def helped me as I did mine today! Thanks
You're very welcome! and thank you, that's much appreciated. Glad it helped!
Beautiful tutorial.
Is it ok also without the clear coat?
How can I remove the nite shade if needed?
Do a clear coat for sure 👍
Good job. Third light not function???
Wow that turned out awesome!
That looks awesome nice job
So how many inches you would say you were away
Outstanding looks great
So how many coats of nightshade did you use and how many coats of the clear coat?
I wanted to wrap mine but failed many times... 14' avenger has very bulbous tails🤦♂️ guess I'll have to spray em
I just tried that today man I did not do well at all alot more difficult then I thought and its cause my optima has lights that are to bubbled too used this vht and it came out way better then the wrap and alot less stress lol
@@franklinhernandez5255 yea I'll be trying that this week, and my tails just have 2 thumb screws and they pop out, will be much easier with them removed🤟
your Scion is dope bro nice little car Toyota made that
This is the first video I've seen where someone sprays the tail lights without sanding the lens first. How has it been holding up?
Still holding up well. Getting new wheels put on so I'll post another vid soon so you can see
AdamJP how long did you wait for the clearcoat
AdamJP also would you recommend taking off the taillights or leaving it on?
How much did you get on the other car
CAN WE USE THE VHT CLEAR COAT WITH THIS PAINT TOO OR THE ONE YOU USED IS BETTER?
very clean job
Appreciate that man, thank you!
does it last through a car wash?
How long did you wait for the tint to dry b4 you did the clear?
She looks good bro! How many cans of each did you end up using? Looking to my 07 Si Sedan but not sure how many cans to pick up
Ayyy thank you! And I only got 1 can of the VHT and 1 can of the clear and that was plenty for me
Sweet! I appreciate it man. Nice looking TC as well!
Is it bad if I don’t put clear coat?
Awesome video man, this gives me tips on how to use it correctly, i rather use this than plasti dip not only plasti dip darker but the nice finish on vht nightshade is professional and the glossy is what i wanted, not a big fan of matte finish for lights
We just posted a video on how to tint taillight with vinyl instead of painting them.
very nice video.. very well done!
Thank you! much appreciated
Do you add gloss when the tint spray is fully dry?
Or just straight after the last coat of tint?
is this illegal? also would 1 coat be enough?
In the can says "Off road only" But with a coat or two I dont think it "looks" illegal
Great Video!! The only recommendation, you should have covered your whole car before paint. You will have very small particles of overspray that is from the clear and vht all over your car that will need to be removed.
Hey thank you! If i ever spray anything on the car again i'll be sure to cover the entire thing
Lol
What clear coat u use
I like it, but if i do it i will have trouble with the police?
Personally, I've had multiple vehicles with tinted taillights and never had any trouble with the police. On the can it says "off-road use only" but I mean come on... lol
Check your state laws, but most say if the lights can be see at 300ft lit up, you're all good
That looks exactly like how I'd like mine done, what brand of clear coat did you use?
I went with the duplicator clear coat, it worked really well
+AdamJP Thanks! I can tell, you did a great job! Hopefully mine turn out that good
Just saw this comment lol sorry this is really late. I don't know if you sprayed yours yet, but just lay down fairly generous coats of the clear and you'll be good. You got this
No I haven't done it yet thanks for the response! I may have got the wrong clear coat tho, I got the rustoleum kind, but I don't like the nozzle I want one that sprays in a vertical pattern so it's even
Oh and one more thing do you remember how long it took you and how much time in between coats you took? I may have to go to my paps garage because my house doesn't have one and stuff will blow all over the tail lights
Did you scuff up the light b4 hand
3 coats on front headlights it wouldn't do much for protection in Canadian winters with salt kick'in into it as every year I have to refinish my after market chin and side scoops! I find that Duplicolor is good for areas not being exposed to harsh elements but against salt it's nowhere as tough as the industrial grade clear coat the shops use!
What's the difference between sanding it n not sanding it? what you do recommend?
Great job well done.
Many people wet sand before tinting because other wise it won't stick is what they say? Did you do that off camera or is it not necessary to wet sand?
Nah I never wet sanded at all. I know a lot of people do but, personally I've never felt it was really necessary
Nice job man , did u use vht brand clear cote ?
Fred Lao the vht wasn't clear coat looks like AutoZone brand or something
Also...where do you get the night shade? An auto store? Walmart?
Thought I got it at auto zone. But I just looked it up to double check and it didn't show any results. So I wanna say maybe it was Advance Auto Parts ?? ... don't quote me though lol
It's advance Auto
O'Reilly's also carries VHT Nite Shades.
what exhaust do you have
Nice work. Dumb question, what rims do you have? I've been looking for something like those.
They're Voxx Monza's. I actually got them off craigslist for $200 and just re-painted them myself so it wasn't a bad deal lol. I've had them for a while though so I'm looking to get new wheels this summer
Oh damn, that's a hell of a lot better than a new set for 700. They just need a repaint black or were a different color when you bought them? Also, 18s?
Yeah they were black to begin with but the paint was in rough shape so I sanded them down and just re-sprayed them myself. And yessir, they're 18's
Awesome, thanks for the replies! I think I'm going to do just that with the stock wheels until I can get myself a pair of better rims. Just kind of on the fence of what to do, I have a nautical blue Tc so it's a little difficult coming up with decent looking ideas. Not to mention I'm still very new to the whole car scene but the Tc seems like a pretty decent car to learn and play with. Good luck with everything.
Hey absolutely, any time! I appreciate it. If you ever have any questions feel free to ask. And that's exactly what I did before I found these wheels, I just painted the stocks
I did mine just like this and mine came out with a very rough texture and it looks like bubbles in the paint but flat against the light.
Did you use an enamel based clear coat?
what is the brand of clear coat that you use?
Duplicolor, I just got it at auto zone. If you pause it at 0:27 you can see the can a little bit
excellent video, thanks
Which clear coat
Whats the clear coat brand ?
Will Rustoleum Acrylic Enamel Gloss Clear work in substitute to the Duplicolor? Thank you.
How long did you wait for the vht to dry b4 you cleared it. And how many coats
Damn that looks good!
Were in gwinnett u at
is it illegal to tint the tail lights in California ?
What brand gloss paint ?
What type and brand of clear coat did you use, and how long does the nightshade last before they start peeling off? Thanks!
I did 3 coats vht and 3 clear coat, very matte Ruff finish... Can I buff?
how do you get the masking tape to be a nice smooth curve on those reverse light sections?
What kind of clear coat? What’s the brand
Dupli-Color
Great job, it takes talent with cheap spray paint!
What store did you go to & buy the vht & can I use the lens tint at autozone?
So you DON'T need to water sand your taillights before spraying the VHT?
How did u mask such a perfect circle? For the reverse lights? I'm trying to do that on my cobalt but the reverse lights never turn out right
Try using a similar sized object as a template, like the bottom of a shot glass or a cup
How did you tint your headlights like that?
did you use any clear coat
you obviously didnt even watch the vid
^^^^
How long did you wait before you applied the clear?
About 15 minutes. Give or take
how many coats and how long to wait b4
I only did 2 coats, just because I had nightshade on them previously that had faded over the years. And I waited roughly 10-15 minutes between coats
Doing tomorrow thank u
does this work with plasti dip?
Lahmarr Grayee No. Plasti-dip is a matte material, so no light will come through. You'd most definitely get pulled over every day.
can you peel this off. how do I take off over spray if I happen to get any on the car
I heard goof off takes it off well
Nahh it doesn't peel off. But when I got overspray I just put a little rubbing alcohol on a microfiber and it took it off easily. Or like Tom said, goof off works as well I guess
We just posted a video on how to tint taillight with vinyl instead of painting them.
so 2 coats of night shade & 3 of clear ? can u clarify
Yessir 2 coats nightshade and 3 coats of clear. That's just what I did personally. My lights had been previously tinted and they had just faded over the years. So since they were still a little darker than stock I only went with 2 coats of nightshade
AdamJP thank you good sir. Hmmmm maybe I'll try a 3 on 4 since mine is straight stock.
Anytime my man. And you could definitely get away with that. It would look hella good
What brand clear coat did u use?
Dupli-color Enamel based
one question i have i dont think i heard you talk about, how long in between coats should i wait to apply another
I think tinted tail lights look fucking nice on a BCP tc. I definitely want them on mine but I'm scared to mess up. Great job though!
Hey thank you very much! It is a little intimidating, but trust me after you do it once, and at least get a feel for the technique, it's really easy. If you want them on yours i'd say go for it!
If you mess up, 90% rubbing alcohol will take it off, just sayin
Compound and wax it if you want it shiny 👍
what clear coat did you use??
I used dupli-color "acrylic enamel clear coat"