Dude, what is your opinion on mid-ride leg straps? I've been considering running one since a regular hip draw makes my holster flop and reholstering a little difficult.
Thank you for dropping by! Unfortunately, I haven't tried those as of yet. But judging by the looks of it, I think they could really solve your problem.... The only trade-off I see is they could hurt your crotch?? Which I am not willing to risk. I have also tried a drop-leg holster before.. Pros: 1. Low carry.. will not impede your waist if you're bending to the side to peek around a corner. 2. Low cost.. could get one for 350pesos minimum?? 3. Has extra mag pouch 4. Doesn't choke the crotch area 5. Widely adjustable to any size pistol Cons: 1. Could swing around if your pistol is of heavier build 2. The leg straps tend to be too long so you might have to mod it a bit 3. Some versions have a velcro strap, some buckles, some have those clip-on button thingy as retention.. 4. Could go against a knee pad However, if you like hip draw but worry about the flopping, I suggest trying a paddle type holster. It is a better attachment than a molle or belt platform imho that is if you are not using an external belt like this video. As for the holster i am currently using, I have no problem whatsoever. Serves me well. Refer to my G34 unboxing video.
i recommend getting a thigh strap. Especially the one that T-rex arms sell because it retains the holster and belt nicely, also it can swivel so it doesn't really impede your movement.
Ah so the same as a Safelife belt. The Velcro belt or the molle belt do not seem as stiff as they should be to support your rig. Notice any kind of sag? I don’t think I’d wear this for a shift at work as security. Just me tho.
What is that mount for pistol holster? Looking for something like that. I guess my legs are weird, because Safariland tends to scratch my leg pretty good. Tek Lok is kind of high.
Hey Nave! Thank's for the video, Question: What size of waist are you ? Im 34 " , I saw the Med. size it's for 34" to 38" and the small it's 30" to 34" . So my question is , does the Velcro in the outer belt will be shorter of the inner belt will be shorter? I mean that if the outer lock belt will be excactly 34" extended and the inner Velcro belt will be about excactly 34.? Im asking you this, because I don't want that extra layer of inner belt around the waist, did you tried the small size? any feedback will be appreciated. thnks !
I have M size. When inner belt is set for 34" and outer belt wrapped around it, outer belt is quite close to its minimum size. Some 1" of nylon strap is remaining. So you would have MOLLE basically all around your waist from buckle to buckle. Which is probably better then S size extended to its maximum, having MOLLE too far from buckles.
Is Idogear an airsoft thing or a real tactical gear company? I'm not trolling, I just really do not know. I bought some of their taco mag holders, they seem good but just wanted to know if I'm a goofball buying airsoft shit for real world use.
Mine was in Multicam and its sucks dont waste Money on this peace of shit. edit: When you want a belt that holds stuff and not feels heavy and just overall shit, than spend the money on a good belt and not these cheap shit things.
This belt sucks, its so bulky and not only too wide waaaaaay tooo thick, it feels so stupid when wearing dont waste your money, the only wankers that wear this are people that dress up in there house and pretend there tactical there really just paintball players.
mabuti pa to, matino ang tutorial, walang sali-salita...
Solid product
Legit video
Like it
I just received mine today
How is it?
How do you like it? I received mine today also seems a little flimsy out the bag. I’ll give a week or 2 test drive.
Well is it decent or what
@@d1ndark25 It is descent
Practising the tea bagging I see :P
😊 lol
Did I read that right - the link is for $1287 ? What a deal.
not usd
Dude, what is your opinion on mid-ride leg straps?
I've been considering running one since a regular hip draw makes my holster flop and reholstering a little difficult.
Thank you for dropping by! Unfortunately, I haven't tried those as of yet. But judging by the looks of it, I think they could really solve your problem.... The only trade-off I see is they could hurt your crotch?? Which I am not willing to risk.
I have also tried a drop-leg holster before..
Pros:
1. Low carry.. will not impede your waist if you're bending to the side to peek around a corner.
2. Low cost.. could get one for 350pesos minimum??
3. Has extra mag pouch
4. Doesn't choke the crotch area
5. Widely adjustable to any size pistol
Cons:
1. Could swing around if your pistol is of heavier build
2. The leg straps tend to be too long so you might have to mod it a bit
3. Some versions have a velcro strap, some buckles, some have those clip-on button thingy as retention..
4. Could go against a knee pad
However, if you like hip draw but worry about the flopping, I suggest trying a paddle type holster. It is a better attachment than a molle or belt platform imho that is if you are not using an external belt like this video.
As for the holster i am currently using, I have no problem whatsoever. Serves me well. Refer to my G34 unboxing video.
i recommend getting a thigh strap. Especially the one that T-rex arms sell because it retains the holster and belt nicely, also it can swivel so it doesn't really impede your movement.
nice video, very helpful
Is it possible to use the belt with real weapons and accessories? Or not stable enough?
Would you happen to know the buckles tension strength
Ah so the same as a Safelife belt. The Velcro belt or the molle belt do not seem as stiff as they should be to support your rig. Notice any kind of sag? I don’t think I’d wear this for a shift at work as security. Just me tho.
This belt does not look stiff at all. I wouldn’t not use this for a real firearm. Safelife defense would be better
What's your over all thoughts on the belt
What is that mount for pistol holster? Looking for something like that. I guess my legs are weird, because Safariland tends to scratch my leg pretty good. Tek Lok is kind of high.
it’s a belt clip attachment that comes with the holster
Was the velcro good quality?
and what do you think of comparing this with TMC?
I can't say about TMC however, the velcro on this one is super strong and sturdy.
Link to belt is all in Russian Jubal. The prices
Very well.
Hey Nave! Thank's for the video,
Question:
What size of waist are you ? Im 34 " , I saw the Med. size it's for 34" to 38" and the small it's 30" to 34" . So my question is , does the Velcro in the outer belt will be shorter of the inner belt will be shorter? I mean that if the outer lock belt will be excactly 34" extended and the inner Velcro belt will be about excactly 34.?
Im asking you this, because I don't want that extra layer of inner belt around the waist, did you tried the small size? any feedback will be appreciated.
thnks !
I have M size. When inner belt is set for 34" and outer belt wrapped around it, outer belt is quite close to its minimum size. Some 1" of nylon strap is remaining. So you would have MOLLE basically all around your waist from buckle to buckle. Which is probably better then S size extended to its maximum, having MOLLE too far from buckles.
What’s your gun holster? Nice vid!
Thanks! That is an Emerson 579 Universal Holster. Fits a variety of pistols!
Can i ask where did u bought the small dump pouch? Thanks
From shopee
Is Idogear an airsoft thing or a real tactical gear company? I'm not trolling, I just really do not know. I bought some of their taco mag holders, they seem good but just wanted to know if I'm a goofball buying airsoft shit for real world use.
I am not an expert on this subject but hsgi makes the real tacos so I'm guessing idogear is a chinese replica producer???
@@echotwofourairsoft Thanks
What Pistol mags are those? Are they the IDOGEAR mags?
U mean mag pouches? They are gcode scorpion soft shell
The mags are clearly airsoft mags. Definitely not a real glock
Hey bro what holster do you use?
It's a safariland 579 knock-off. The off-brand is Enerson 579. Check out my WE G34 unboxing I unboxed the holster there too.
@@echotwofourairsoft shoppee din yun?
@@janxavierfetalvero7688 kay tuks' shop din
@@echotwofourairsoftbro universal ba ung holster ng pistol? suot kaya sa girsan mcs to
Hi! Can you tell me the belt thickness?
2 inches
@@echotwofourairsoft 2inch is not the thickness.
Thinner than hsgi original. Hsgi looks 2 layers inner between molle fabric. This brand looks 1 layer but still does the job. Price says everything.
malambot ba ?
hindi siya malambot hindi rin sobrang tigas, tama lang po
No commentary!?
Mine was in Multicam and its sucks dont waste Money on this peace of shit.
edit: When you want a belt that holds stuff and not feels heavy and just overall shit, than spend the money on a good belt and not these cheap shit things.
Just got mine today, brill heavy duty belt sturdy and strong not sure what ur on about... nowt wrong with them highley reccomend
This belt sucks, its so bulky and not only too wide waaaaaay tooo thick, it feels so stupid when wearing dont waste your money, the only wankers that wear this are people that dress up in there house and pretend there tactical there really just paintball players.
Hey man thank you for your input. It really helps the airsoft community. 👍👍👍
they're
Why the fuck he so mad? Lmao you don’t know people budget and this all they can afford why down them for that ?
Highly doubt you're dropping the money for a Gucci setup basement larper 😂 But yeah, this belt is absolute GARBAGE
Given you can't even spell "they're", I'd refrain from calling other's wankers so as to not fall in the ironic section