Grasshopper Tutorial (Weaverbird)

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 129

  • @zahrasalehi5846
    @zahrasalehi5846 9 หลายเดือนก่อน +3

    Thank you for sharing this tutorial. for those who want to practice it with new versions of Rhino, you can use "Trimesh" and after that "Triangulate", instead of "Mesh Machine"

    • @freis4532
      @freis4532 หลายเดือนก่อน +1

      Where would you connect the triangulate to on the Trimesh?

  • @B-water
    @B-water 4 ปีที่แล้ว +2

    This tutorial is a gift from heaven. I need to buy course from you to express my appreciation.

  • @gonzalofalla6658
    @gonzalofalla6658 4 ปีที่แล้ว +1

    Best tutorial by far, thank you

  • @nelsong5750
    @nelsong5750 5 ปีที่แล้ว +1

    Thank´s a lot Parametric House...the best tutorial of weaverbird...

  • @muayadhabeeb6302
    @muayadhabeeb6302 5 ปีที่แล้ว

    Thanks for the great tutorial, video! Very helpful ... I love how detailed and God's give you more strength and health. You are doing great work brother.....!

  • @tay.0
    @tay.0 6 ปีที่แล้ว

    I recently found this channel, every video adds ALOT! .. my goal for 2018 is to watch every video of yours!

  • @BillySnowball
    @BillySnowball 4 ปีที่แล้ว

    Was thinking this was same architectural nonsense where terrible boundaries are left to the engineer to resolve. I was wrong. This is decent. Bravo

  • @ckmok8784
    @ckmok8784 2 ปีที่แล้ว

    Very good explanation, I learn a lot from this video, thanks

  • @TamepLAN
    @TamepLAN 6 ปีที่แล้ว +1

    Top lesson! Great channel! Thank you!

  • @iremsemiz9396
    @iremsemiz9396 3 ปีที่แล้ว

    Loved it. You are great!!!

  • @FranciscoSanchez-jf1jg
    @FranciscoSanchez-jf1jg 4 ปีที่แล้ว

    Thank you for providing us a very good material for learning, keep doing it please!

  • @robi9890
    @robi9890 4 ปีที่แล้ว +7

    The new version of kangaroo hasn't got mesh machine component. Which is the new sobstitute?
    Great tutorial. Yout lessons are very clear. I can understand you even if i'im a italian who doesn't know english very well

    • @juantonello6589
      @juantonello6589 3 ปีที่แล้ว +1

      have you been able to find meshmachine in rhino 7? i have been trying to but i cannot find it. its driving me nuts.

    • @josebarcenas3961
      @josebarcenas3961 3 ปีที่แล้ว

      @@juantonello6589 same to me

  • @euginaduan6234
    @euginaduan6234 3 ปีที่แล้ว

    Great Channel!!!

  • @feliper2916
    @feliper2916 3 ปีที่แล้ว +2

    Hi, I can not download the cocoon plugin. It seems the website has stopped working (This domain is pending renewal or has expired. Please contact the domain provider with questions.). Any alternative dl links? Or can anyone upload it somewhere? Thank you very much in advance!!

  • @galiafvelikiy4615
    @galiafvelikiy4615 6 ปีที่แล้ว +4

    This one is a great one! :)

  • @heiasat-9508
    @heiasat-9508 4 ปีที่แล้ว +1

    Thank you great job

  • @nandanmukkamala7872
    @nandanmukkamala7872 4 ปีที่แล้ว +3

    I have an error.. My refine isn't giving me the final output. Instead when i gave all the parameters to the refine in cocoon, it's giving me a red error! Could you help me resolve this please!

    • @tommasovidali3556
      @tommasovidali3556 4 ปีที่แล้ว

      I have the same error. When I connect all the input to the refine mesh, the command gets red!

    • @martinpuccini1089
      @martinpuccini1089 4 ปีที่แล้ว

      Same here. Need help!!!!!

    • @alpesassolak1545
      @alpesassolak1545 4 ปีที่แล้ว

      had the same problem, installing plankton
      solves the problem
      github.com/meshmash/Plankton/releases

  • @boblee5331
    @boblee5331 4 ปีที่แล้ว +2

    is there a similar command in Kangaroo2 for 'MeshMachine' command? thanks!

  • @victorialiu9238
    @victorialiu9238 5 ปีที่แล้ว

    Great tutorial ! Thanks a lot!

  • @Redmanuka
    @Redmanuka 6 ปีที่แล้ว

    really cool tutorial , cheers :)

  • @alperenkalkan4170
    @alperenkalkan4170 2 วันที่ผ่านมา

    the thing is, you couldn' create window panels by using wb's dual graph, you just extract curves. How can we get meshes?

  • @hokagenam
    @hokagenam 3 ปีที่แล้ว

    I cant find the meshmachine option with the kangaroo i am using, neither is the mesh showing up on the mass. How can I resolve this? Please help with the correct kangaroo version. Thank you (rsvp).

  • @ellegold1039
    @ellegold1039 ปีที่แล้ว

    I cant see the Mesh in Rhino?
    Wireframe Mode is active?
    Thx for any help---

  • @giovannidamato5825
    @giovannidamato5825 6 ปีที่แล้ว

    Fantastic!!

  • @pbonanno83
    @pbonanno83 5 ปีที่แล้ว

    Hi and thanks a lot for the tutorials, they are very simple to study. I got a problem with the meshmachine component, because in Kangaroo 2.42 is not present. Which component I could put instead of? Sorry for my bad english...

  • @yauheniyakarpenka4371
    @yauheniyakarpenka4371 2 ปีที่แล้ว

    Firstly thanks a lot for the tutorial, it´s amazing:) The only problem I had that when I turn boolean toogle to ´false´ it shows MESH MACHINE tool in red and turns a model off. Could you help please? (I´m using Rhino 7 + Kangaroo Physics plugin)

  • @handjiiski
    @handjiiski 21 วันที่ผ่านมา

    When I try to increse the interations for MeshMashine it gives me an error:
    1. Solution exception:Index was out of range. Must be non-negative and less than the size of the collection.
    Parameter name: index

  • @jakuboszczyk1403
    @jakuboszczyk1403 5 ปีที่แล้ว +1

    Any idea why while running the refine component from cocoon the warning appears - "solution exception: parameter #5 cannot be marshaled/unmanaged type combination (arrays can only be marshaled as LPArray, ByValArray or SafeArray)" ? I set all the values as in the video. Btw, great tutorial!

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว

      The refine component is tricky and it often gives error. Try changing your base mesh size (decrease it)

    • @jakuboszczyk1403
      @jakuboszczyk1403 5 ปีที่แล้ว

      Didn't work, the same problem happens with the MeshMachine tool.

  • @woodyhe8942
    @woodyhe8942 6 ปีที่แล้ว

    thanks for your effort

  • @feikejansen9921
    @feikejansen9921 4 ปีที่แล้ว

    Amazing video! Is it also possible to make the mesh out of rectangular' windows' ? Which tool should I use for that?

  • @iyellalot
    @iyellalot 6 ปีที่แล้ว +3

    its showing, 'system cannot find the file specified'

  • @sean1782
    @sean1782 3 ปีที่แล้ว

    hi, when I finish this mesh and bake, but i can not explode or trim this mold

  • @bartbliek469
    @bartbliek469 3 ปีที่แล้ว

    Bit late to the party but would it be possible to do this with custom geomtery? It seems like you can only imput points with different radii, but what if I want to control and position elipsoids for example?

  • @user-fu3fh5tz3k
    @user-fu3fh5tz3k 4 ปีที่แล้ว +1

    Refine doesn't work in my computer. Should I install more plug ins? I intstalled just weaverbird, cocoon.

    • @ParametricHouse
      @ParametricHouse  4 ปีที่แล้ว +1

      Try installing Plankton
      www.grasshopper3d.com/group/plankton

    • @user-fu3fh5tz3k
      @user-fu3fh5tz3k 4 ปีที่แล้ว +1

      @@ParametricHouse Thanks!! It works!

  • @rq9772
    @rq9772 3 ปีที่แล้ว

    Hola, no encuentro el "meshmachine" en grasshopper, tengo instalado el weaberbird :(.

  • @amircrysis
    @amircrysis 4 ปีที่แล้ว +1

    Hello again my dear tutor I just wondered is there any possible way to turn this to surface for paneling stuff in lunchbox? I'm really confused

    • @ParametricHouse
      @ParametricHouse  4 ปีที่แล้ว +1

      Hi Amir, unfortunately no. This is a mesh surface while Lunchbox is for Nurbs

  • @dorcaschew147
    @dorcaschew147 ปีที่แล้ว

    hello i was wondering why can't i bake the model at weaverbird's mesh thicken, it said it is an invalid object, what could possibly be the issue? Thanksss

    • @ParametricHouse
      @ParametricHouse  ปีที่แล้ว

      Yes it happens a lot a simple fix is to use Pufferfish mesh offset instead.

  • @niteshbharatwaj3885
    @niteshbharatwaj3885 5 ปีที่แล้ว

    Great Tutorial, it gave me a good start to metaball like structures. I got a similar output on following the tutorial successfully. But, is there a way to create surfaces with other than triangulation???

    • @niteshbharatwaj3885
      @niteshbharatwaj3885 5 ปีที่แล้ว

      to be more precise - a mesh with hex pattern.

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว +1

      You can use the Dual graph to produce hexagons on a triangular mesh

  • @disegno4755
    @disegno4755 5 ปีที่แล้ว

    I really Thank you for this awesome tutorial!! this workflow is very usefull. I have a question, to find the MeshMachine component I got crazy, I had to go back to the Kangaroo 0099 version, has it been cut out from kangaroo? is there any alternative to it? I hope you'd find a chance to answe, thanks again!

    • @disegno4755
      @disegno4755 5 ปีที่แล้ว

      I scrolled the comments and I found release :D thanks again for your tutorials!

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว +1

      You're welcome Disegno!
      Happy to hear they were useful

  • @AhmedRamadan-vs4fu
    @AhmedRamadan-vs4fu 5 ปีที่แล้ว

    great Tutorial, thanks a lot!!
    definitely planning on watching more of your videos
    quick question though: the refine tool gives an error and shows this message:
    1. Solution exception:Could not load file or assembly 'Plankton, Version=0.3.4.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    any idea how i might fix it?

    • @AhmedRamadan-vs4fu
      @AhmedRamadan-vs4fu 5 ปีที่แล้ว

      never mind, it works fine now somehow.
      the problem had something to do with the plug-in installation. apparently i did not install it properly.

    • @victor211296
      @victor211296 4 ปีที่แล้ว

      @@AhmedRamadan-vs4fu i have the same problem, do you know how did you solve it?

  • @seanpretorius718
    @seanpretorius718 6 ปีที่แล้ว +1

    Hi guys. The mesh machine plugin seems to be missing from Kangaroo! Which version of Kangaroo are you running?

    • @ParametricHouse
      @ParametricHouse  6 ปีที่แล้ว +2

      Hi Sean, you should install the Kangaroo Physics plugin (not kangaroo 2)

    • @seanpretorius718
      @seanpretorius718 6 ปีที่แล้ว

      @@ParametricHouse Kangaroo physics latest 2.42 (Current version) from food for rhino?

    • @seanpretorius718
      @seanpretorius718 6 ปีที่แล้ว +1

      Mesh machine is not in the latest release of kangaroo physics in Rhino 5 or 6. Any idea why?

  • @chriskkyaw4856
    @chriskkyaw4856 5 ปีที่แล้ว

    do you know any reason why i cant down marchingcubes on mac ( using parallel for rhino ) which GH told me to download in order to download the cacoon plug-in

  • @rickstahh
    @rickstahh 5 ปีที่แล้ว +2

    Hi, I can't find MeshMachine in Kangaroo2

    • @user-fu3fh5tz3k
      @user-fu3fh5tz3k 4 ปีที่แล้ว

      Search 'Meshmachine Kangaroo' on google, You can download it.

  • @dikshamalani4238
    @dikshamalani4238 5 ปีที่แล้ว

    CAN WE SET EQUAL ANGLE IN MESH MACHINE , BECAUSE I WANT TO CREATE EQUILATERAL TRIANGLES IN TH EMESH WITH SAME ANGLES AND LENGTH. CAN U GUIDE ME FOR THIS?

  • @hehe-ou1vb
    @hehe-ou1vb 3 ปีที่แล้ว

    thanks

  • @koplandavid
    @koplandavid 5 ปีที่แล้ว

    hello so i made a wrist spint using this video but the finnished product is not okay, is there any way to make the edges of the mesh thicker. The thicknes of the triangles is okay but some edges are really thin.

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว

      It really depends on your project but you can also install mesh+ plugin and see if it helps

  • @weidah1318
    @weidah1318 5 ปีที่แล้ว +1

    Thank you so much for the video. my refine icon running red, i dont know why..:(

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว

      You're welcome...try changing the values

    • @milagrosagostini5608
      @milagrosagostini5608 5 ปีที่แล้ว

      @@ParametricHouse I'm having the same problem

    • @locolegs1000
      @locolegs1000 5 ปีที่แล้ว

      Same problem here.....

    • @marysolcasara6376
      @marysolcasara6376 4 ปีที่แล้ว +1

      Plankton needs to be reinstalled along with the.dll file, this is in the grashopper library, here is the link to download plankton: github.com/meshmash/Plankton/releases

    • @RobstarTS
      @RobstarTS 4 ปีที่แล้ว

      @@marysolcasara6376 Thank you for your helpful comment

  • @InbarShahak
    @InbarShahak 4 ปีที่แล้ว

    Hi, thank you for this video, I have downloaded the plugins but now I get an error message while loading grasshopper, do you know if they can still work with rhino 5?

    • @ParametricHouse
      @ParametricHouse  4 ปีที่แล้ว

      You're welcome
      Its ok with rhino 5...try unblocking it by right clicking on the gha file and properties

  • @giovannidamato5825
    @giovannidamato5825 6 ปีที่แล้ว

    Is it possibile a video on form finding?

  • @matiputiurki
    @matiputiurki 6 ปีที่แล้ว +1

    How can I make the same thing with voronoi mesh ?

  • @MrVincemaster
    @MrVincemaster 4 ปีที่แล้ว +1

    I have this error 1. Solution exception:No se puede cargar el archivo o ensamblado 'Plankton, Version=0.3.4.0, Culture=neutral, PublicKeyToken=null' ni una de sus dependencias. El sistema no puede encontrar el archivo especificado.

    • @ParametricHouse
      @ParametricHouse  4 ปีที่แล้ว +1

      Try also installing plankton
      github.com/meshmash/Plankton/releases

  • @EveryThing-ux8vk
    @EveryThing-ux8vk 6 ปีที่แล้ว

    thank you for usefull toturail

  • @taniamadah7498
    @taniamadah7498 5 ปีที่แล้ว

    thank you for your fantastic tutorials, I follow all the steps to add the plugins but they don't show on my toolbar, any idea on what is going wrong?

  • @hussamalnahdi5785
    @hussamalnahdi5785 5 ปีที่แล้ว

    very useful tutorial but I couldn't find the cocoon menu

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว

      Try unblocking the component , right click , properties , unblock

  • @leannapanda5300
    @leannapanda5300 4 ปีที่แล้ว

    Pls help how can I get the weaver bird, the link is broken

    • @ParametricHouse
      @ParametricHouse  4 ปีที่แล้ว

      Thanks for letting us know... the link's been updated

  • @vitalyivankov9362
    @vitalyivankov9362 6 ปีที่แล้ว

    great!

  • @comedy4dummies247
    @comedy4dummies247 4 ปีที่แล้ว

    How would you use weaverbird with a 3D scanned model?

    • @ParametricHouse
      @ParametricHouse  4 ปีที่แล้ว

      Try remeshing it with kangaroo and then use weaverbird

  • @rajeshrazz9244
    @rajeshrazz9244 5 ปีที่แล้ว

    Where can i download remap+ plugin??

  • @iyellalot
    @iyellalot 6 ปีที่แล้ว +1

    please help
    i cant see the refinement lines

    • @ParametricHouse
      @ParametricHouse  6 ปีที่แล้ว

      Sajith Pc please check the example file from my website

    • @iyellalot
      @iyellalot 6 ปีที่แล้ว

      thank you very much for your response.

    • @iyellalot
      @iyellalot 6 ปีที่แล้ว

      although ive registered in your website,I couldnt download the file from your website, can you please mail the example file to: splashwky@gmail.com

    • @ParametricHouse
      @ParametricHouse  6 ปีที่แล้ว

      I added weaverbird for rhino 6 in the post. check it out again!

    • @iyellalot
      @iyellalot 6 ปีที่แล้ว

      thank you once again for your response mister.. your tutorials are the best in youtube.

  • @BillySnowball
    @BillySnowball 4 ปีที่แล้ว +1

    Good lad

  • @alexhu5696
    @alexhu5696 5 ปีที่แล้ว

    Thank you ! great!!!

  • @risadinha1000
    @risadinha1000 6 ปีที่แล้ว

    I Don't know why, but the MeshMachine from Kangaroo is not fixing the naked curve

    • @ParametricHouse
      @ParametricHouse  6 ปีที่แล้ว

      Try to connect a timer to it and set reset to false

  • @杨超宇-m9r
    @杨超宇-m9r 5 ปีที่แล้ว +1

    SORRY, subD onlye worked when itis 0, it doesn't work when it is more than 0...................

  • @grantkoniski1293
    @grantkoniski1293 5 ปีที่แล้ว

    my form is showing up smooth and not triangulated

    • @ParametricHouse
      @ParametricHouse  5 ปีที่แล้ว

      The base of cocoon is smooth but you have to use kangaroo's meshmachine to triangulate it.

    • @chriskrofchak
      @chriskrofchak 5 ปีที่แล้ว

      @@ParametricHouse How? When I bake I see the outline curves, how do I view all the mesh outlines like yours does, before you use MeshMachine

    • @chriskrofchak
      @chriskrofchak 5 ปีที่แล้ว

      NVM...... FOUND IT.....

  • @seanpretorius718
    @seanpretorius718 6 ปีที่แล้ว +2

    Installing mesh machine is impossible!!

    • @ParametricHouse
      @ParametricHouse  6 ปีที่แล้ว +2

      Maybe this link can help
      www.grasshopper3d.com/profiles/blogs/meshmachine-update

    • @mutsing5756
      @mutsing5756 ปีที่แล้ว

      @@ParametricHouse that's really helps a lot, I have been looking for this for almost 30 min!

  • @InFactVEVO
    @InFactVEVO 3 ปีที่แล้ว

    How can i apply lunchbox plugin after making shape with cocoon? Since its not a surface how can i turn it into a surface ?