Installing the Rough Country 4 inch lift on the Jeep Grand Cherokee WJ lift kit
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2019
- How my husband and son installed the four inch lift on the #jeep #grandcherokee #wj using the #roughcountry #fourinchlift #4x4 #jeeplife #liftkit #itsajeepthing #roughcountrylift #liftkits #liftedjeep #stampmom9 #9farms
If you decide to try Azure
Please use share code DawnGallop1
Azure www.azurestandard.com/?a_aid=...
To buy a lighter to help the channel out
Limited-time deal: REIDEA Electronic Candle Lighter Arc Windproof Flameless USB Rechargeable Lighter with Safe Button for Home Kitchen Champagne Gold www.amazon.com/dp/B07D6LX9ZP/...
Dawn20off
Spices Hamtownespicery.com (cinnamon)
The cheese press Ricki Carrol
cheesemaking.com/pages/our-story
My blog post
www.flipflopsandpoptarts.com/2...
If you ever want to try Schwans we have been a customer since 1995
www.schwans.com/landing/?id=r... - แนวปฏิบัติและการใช้ชีวิต
![LISA - ROCKSTAR (Official Music Video) REACTION [SHE'S BACK!]](http://i.ytimg.com/vi/QBxE30vavMQ/mqdefault.jpg)
gotta love the parents for doing what they just did for colton. Especially guiding him through it as they conducted the project.
Ecks The Madman thanks a lot you brought happy tears to my eyes. Thank you very much. 💫
This what people should be doing and not protesting and disturbing others. They love Colton thats for sure. He is a lucky boy!
Amen!!! Thanks so much.
Update: well hello it’s been working well we have had to replace a whole bunch of parts here and there based on the age of the vehicle, we are now needing to get a rebuild kit in front lower control arms because the snap rings won’t stay in place we are talking with Rough Country now on that. We just replaced the tie rod ends also we are gonna replace the drop pitman arm as that wore the tie rods out and the steep angels on the drag length and caused bump steering. That is something to consider when you do the kit. As for the driveshaft we had to remove the front driveshaft and replace the cv joint on the transfer case side because it created a vibration that made it un-drivable. Right now it has fixed the problem. It has been 7,000 miles later in 9 months since the kit was put on. We also replaced the rear suspension upper control arm and ball joint, all this should have been done during original install of the kit basically due to the age of the vehicle and the miles that was on it originally. Rough Country has been great. Colten is a great kid who helps out and he is only 18 so you know how that can be. When we purchased the kit May 2019 Rough Country was not selling the drop pitman arm at that time now they are. Jic anyone wanted an update. Today is March 2, 2020
Love how you take pride in your sons activities....
JayCarl thank you so much!! That was a very nice comment. We helped him put in a stereo amplifier on latest video Jeep mod. Thanks again! 👍🏻✌🏻
Thanks Mom, Dad and son to sharing your experiences.
The WJ ITS LOOKING GOOD.
Thank you so much Mario for your kind and wonderful comment, great appreciated. 🌟
BIG RESPECT I LOVE JEEP
Safwat Braiki absolutely!! Thank you for the comment!!! 🌠
Well done! I wanna install this kit on my son's wj.
Thanks, you most definitely should install it, it is still doing well and our son is proud of it. Thanks for the comment. Take care.
Super cool parents... My dad would have definitely guided me, But make me do it myself..... My son has a 2004 explorer that he wants to put a lift on.... I'm about to be in the same position as you guys.... If it don't come with a joystick he don't know how to operate it... So I'm sure I will be installing(with him standing by, learning, of course)......you guys rock
That is awesome, so good to hear your upcoming project. Makes us proud. I really appreciate your wonderful comment it means a lot. Sending all the best and positive vibes your way for a super special project. Thank you 😊
@@dawngallop thank you.. yeah we are in Michigan so it's going to be at least 2-3months away.... Too cold and wet right now...but I'm excited, to see him excited.....stay blessed
I bet so, I read ya on the wet and cold. Take care and blessings to you as well.
Nice job Colt!
Thank you 😊
Right nice big box that comes
Yes true. People always ask on the questions what kind of box it came in I guess for making sure it makes it all in one piece to the door. 🤷♀️
Awesome 👌
Thank you 😊
Wow..... nice car
Cool lift, thanks my mom and dad installed it lol
Thanks lol
Thank you
I would check the CV boots on the driver side front axel. It looks like there was a tear in the boot and this will cause the joint to fail.
Kyle White thank you so much you absolutely correct, I appreciate you telling us that Colten is ready to fix anything on his Jeep. Stay safe and well!!! 👍🏻
Looks nice! What size tires did you go with?
catahoula hello and thank you. Colten went with the 32x16 Toyo all terrain (these are the same I have on my FJ Cruiser. Have a good one.
Ilove you jeep wj
Thank you
Hello. Did you install the track bar bracket that came with kit
Hello Kenneth,my son says yes we did install the one that came with the kit.
My dads a bit different
He would tell me there’s no need to lift it
It’s fine the way it is and to do it myself because he wants no part of it
JUST SOME CANADIAN GUY lol! That would be my parents too! We can’t fix that can we!? Thanks for the comment! 💫
@@dawngallop
Would you mind looking at the front lower control arms for me please?
I have some adjustable ones from a different manufacturer and they're straight with parallel bushings. The bushings are extremely distorted on mine.
Your arms seem to be bent to prevent this bushing issue I'm seeing on mine.
Am I right, your arms are bent?
Are they bent inward? (Like for turning radius)
Or are they bent vertically for ground clearance ?
The video was a bit too quick for me.
Thank you thank you. 🙏
Cool people
Thanks what a nice comment appreciate that!! 👍🏻😊
👍nice work ....any death wobble?
chris aragon hello and good morning we are running street Toyo open country radials there was no death wobble we just had the bump steer issue but that was because we needed the drop pitman arm which I actually ordered yesterday. Our son has worked on it and we keep adding things. I updated a post on here Monday night about how it was doing now since the install. Thanks for asking. Thank you for the great comment.🌟
Nice work, how much did you spend on this
Danny Pinarete hello, the kit was right at $1,000 which they offer a financing if you choose, which my son was quick to offer that idea. The tires with alignment and installation of the tires plus tax was $1,100. We basically did all the work except the tires. I can’t remember any other cost so roughly $2,100 total. Everything has went well and he has put it to the test!!! About two weeks ago (the end of October 2019) the rear shock bracket worked loose and our son didn’t notice so we called rough county and ordered another bracket which was like $36 bucks total. Thank you for asking. Appreciate the compliment.
Great looking jeep my wife and I are doing the same to our daughters 2001 jeep grand Cherokee we've ordered a new crate engine and while waiting on it we are installing a 4" lift you could say it's a family project. Sorry people this jeep isnt going to the BMR in disney oklahoma
Thanks so much for your comment. That is awesome that you guys are doing it for your daughter. Totally get it a family project. Best of luck on the new engine and the installation of the lift. Our son definitely loves his Jeep and I know your daughter will too!!! Go Oklahoma!! ✌🏻
@@dawngallop we have a 93 jeep cherokee rock climber and did have a 91 cherokee and an 87 wrangler sold them but the one with the new engine is not for going offroad though just doing it for looks
Paul I hear ya we have had our share of monster trucks and since we are old now over 50+ we don’t want to jump in out of them anymore. The older vehicles are definitely the best!!!! That’s awesome!!! You just can’t take the 4x4 out of ya once you’re in it!! Keep us posted on the project. Take care! ✌🏻
@@dawngallop will do I dont have facebook, messenger or any of that online stuff otherwise I would send pics. My daughters jeep is a white lerado and the 93 rock climber is a dark blue caged lerado with blue racing seats and fuel cell
WHAT SIZE TIRES DID U DO??????
mom is cute and looking good
Thank you 😊
How is this short arm kit doing now? Im about to get one and hear that things start breaking after a few months is it riding good?
Jordan Kornegay hello the short arm kit is doing absolutely fine! Only parts we have had to replace that was originally on the Jeep tie rod ends and bushings that support the springs things we should of replaced at first. All and all doing awesome!! He just turned 18 and drives it everywhere we live on a large farm so he dogs it in the mud and we live on a dirt road so it makes long journeys everyday. I think it is definitely worth it and he is super glad he got it. He wants to do my FJ cruiser but idk yet. Thank you and hth.
Dawn Gallop of #9 Farms
Have you had any problems with death wobble so far?
If you had access to a lift would you have preferred to use it? My buddy has one but I'd rather do it at my house if its not that much easier with the lift
Hello Brad he said he never had a lift so he says he didn’t miss it. However I know at the four wheel drive shops they do have lifts so perhaps it is much easier. Nothing is ever better than your house.
What is hard to adjust the axles so u don’t get drive line vibration/noise
Josh David we called Rough Country and these jeeps have to change the CV joints to universal joints or even maybe a new drive shaft. Jeeps this year some have a front universal joint on the axel and a cv joint on the transfer case. A new cv joint on the transfer case side of the drive shaft if it’s dried out. We removed the drive shaft to confirm where the vibration was coming from. Rough Country recommendation is to change the drive shaft. Which changing the drive shaft is approximately around $400. HTH thanks for asking.
After you change the front drive shaft does it still vibrate?
What size tires? I just bought the same kit for my 04 WJ. I also bought a set of 265 75r16 to go on the stock rims. Just dont want my truck to look like she missed leg day! Lol.
Do the 265's have plenty of room ?
Yes but he says any taller or wider you will need to trim
@@patrickmueller377 I had to trim the slightest bits off the front fascia. Which didnt look bad but I went a bought solid steel bumpers that clear everything I plan on moving up to 33s when I wear my tread down. I also have 1½" backspacers on my rims btw.
@@danwall5010 does your tyres stick out... Because of those spacers?.. same line with fenders?.. i allso thinking to buy 4" lift and spacers... And WJ 2004 😅. Greetings from Finland 😁
@@petepeto9335 They dont poke out like a dunebuggy and look ridiculous if that's what your asking lol.. spacers really helped stabilizer my WJ it doesn't feel so top heavy on corners. I have bottomed out my tires on the edge of my fender while mudding and slammed my ass end a bit too hard lol.
do you have a link to the set you bought?
Michael Daddio www.roughcountry.com/jeep-suspension-lift-kit-639p.html?find=2001-jeep-grand-cherokee-4wd-374085
The good ol ratchet strap method
Yep it works every time. Thank you
Hi where did you get the lift kit from?
Hello the lift kit came from Rough Country.
What size tires? I’m getting a 3 inch lift and want to know the size on these a/t???
Oliver Hernandez Toyo All Terrain 265 75 R16 good luck on your lift, you will be so happy with it.
Thanks I appreciate it..
Hey is that stock tires on it?
No they were a little bit oversized.
And what muffler is on there?
It’s a straight pipe. I actually posted a video on that let me see if I can find the link.
2001 Jeep wj grand Cherokee Laredo with flow master super 10
Give a man Jeep and he will jeep for a day, teach a man to Jeep and he will Jeep for a lifetime
Exactly!!!!!
sweet only on a jeep
JEEP YJ 4WD yeah that’s what my son would say too! He has done so much more. Little stuff. Thanks for the comment.
Those tires look like baby tires for that lift
Haha he drives back and forth to the shipyard everyday so he needs good gas Mileage too. Thanks for watching.
Its not in good proportions. Add some spacers and overfenders...different ballgame.
Thanks for your input the Jeep is a vehicle my son drives everyday to work one hour and a half one way daily. He has to have tires that are able to take daily travels not for show.
i think that little girl is milks man BABY
That little girl is our granddaughter and she stays with us while her mom is deployed.
Does the “happy boy” know which end of the hammer to use? He looks to be spawned from another daddy. Shuddup I knows how to plays me video games.
Very observant lmao 🤣
Next time let your boy do it and you help him he isn't going to respect the jeep the same way he would have if he did it.
He did help he just didn’t want to do any talking he is camera shy. Thank you
Did the drop pitman arm help on drivability issues? I have same lift but with out drop pitman arm.
Yes it did Adam most definitely. Our teen drives it rough you just have to check the bolts pretty regular. The drop Pittman arm is worth it.
Give a man a fish feed him for a day teach him how to fish and he will sit on a boat for 8 hours drinking beer
Yes he will!! Love it
Lady learn how to use a camera
Thank you there buddy I’m still learning the flip phone