I've been using a negative LOD Bias for years, it's a great way to compensate for blurry AA. Just make sure not to overdo it, otherwise you'll introduce a lot of shimmering.
Same. When I realized turning this on helps see distance objects better you always want it on and if the game has MFAA you want that enabled to minimize the aliasing edges in game. This will use more of your GPU but will give you better visuals to spot things.
@@alpha_5248 helps see more detail on further objects for better view distance so go into nvidia control panel and just enable LOD bias to clamp and leave it on for global profile and all games will look better at the cost of like 2-3 fps. Worth it. You don't have to follow all these steps listed in the video unless you want do the clay mode and etc...
There are no limits such as from -3 to +3. For example LOD Bias of +2.5625 has a hexadecimal code 0x00000029 (column to the right from the settings), LOD Bias of +3 has a hexadecimal code 0x00000030 and you can change this hexadecimal code instead of the settings (middle column which has values from -3 to +3). This way if you put 0x00000031 it will give you an LOD Bias of +3.0625. This way the 'clay value' (0x00000078) is just a very high positive LOD Bias and it is NOT the highest. I have tested this feature extensively in bf4 and there is a very slight but visible difference when using values higher than 0x00000078 (the textures become even more roblox-ish).
@@ravszee I was only testing the visuals, but I do not feel any difference in terms of performance regardless of the LOD. I have fps counter on whenever I play and in general fps are the same as default LOD, as for 0.1%, same thing, I do not notice any stutters, nor did I when I was playing with default.
For modern warefare 3, and Warezone "3" the clay mode and subsequent mode above it introduce horrible artifacting in ground. From flickering, to weird head tracking texture warping, unlike in Wz2, and Wz1. It's not recommended you use this, not sure if its an issue to SMAA built into the game, or what, but something in the pipeline breaks this and its more distracting than useful.
this needs to be set manually when using games with DLSS mods like RE Engine games, but I haven't found any other example where a negative bias made textures look better compared to setting "negative LOD bias" to allow.
Solid Video! Definitely one of the TH-camrs I keep up with to make sure I have the latest & Greatest tweaks for the upper edge gaming; looking forward to the next video!
Clay LOD works perfect for the Delta Force Alpha test... makes the game run better and easy to see the enemies... Gotta try it out... plus you can see thru smoke somewhat.
@@FR33THY awesome dude. have you noticed the VRR flicker? i was digging thru some of your gsync videos and am trying to figure out the best alternative keeping gsync off because it bothers me in some games. what do you use? i think ive settled on Fast Sync + 480hz cap mostly for Fortnite performance mode, then in non-comp games, just enable the in-game VSync or frame gen which I really like. any thoughts? Edit: specs 7800X3D, RTX 4080
@@FR33THY Damn. What would you use for an alternative to tearing and stutter with low latency? Flicker on non-gsync hasnt been my experience, but I've had all G/Freesync monitors for the past 6 years. Before that I had non-gaming monitors.
for AMD go to: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD LodAdj (reg_sz) for me this is level of detail this use to work 100% on cs go wich is dx9,but now on cs2 it does nothing,if you download RADEON MOD,in the software there is description about this value: "Mipmap quality setting. Ranges from -6 to 11. Lower values will cause shimmering, higher values will reduce image quality. 0 is recommended"
@@kayzen2329 that's simply incorrect, w10 has the cpu scheduler update for 12/13/14 gen also. omar, its up to you. most of us are switch to w11 now for better features.
@@FR33THY thank buddy I really appreciate your work and the work you put into ur videos keep it up I have decided to go back to W10 have followed your step by step and the PC is like brand-new 👍👍
@@FR33THY thanks Freethy I did Negative LOD at -500 on my stretched RES and It looks fricken Awesome! I just loved how the clay made it look like Battle Bit.
@@FR33THY Best thing about it all is I never have to manually put the 3d settings in ever again... when I update driver just run the LOD default script and it's all done for me!!! TOO COOL! THNX
Shame that it's detectable, and it would be nice if devs decided to deal with this in another way besides banning, but it's a pretty big risk to take if they decide to swing the ban hammer
![[DRIP] ‘Love, Maybe’ PREVIEW](http://i.ytimg.com/vi/U7hwHp95m1k/mqdefault.jpg)
I've been using a negative LOD Bias for years, it's a great way to compensate for blurry AA. Just make sure not to overdo it, otherwise you'll introduce a lot of shimmering.
Same. When I realized turning this on helps see distance objects better you always want it on and if the game has MFAA you want that enabled to minimize the aliasing edges in game. This will use more of your GPU but will give you better visuals to spot things.
is it to safe too use for game like escape from tarkov, and rust
@@alpha_5248 helps see more detail on further objects for better view distance so go into nvidia control panel and just enable LOD bias to clamp and leave it on for global profile and all games will look better at the cost of like 2-3 fps. Worth it. You don't have to follow all these steps listed in the video unless you want do the clay mode and etc...
@@alpha_5248 likely. I don't use positive lods because that's just will cheating. As he said in the video, some games prevent you from using it.
Hey fr33thy any chance you can reupload your game configs? Thanks man for all your work
I was there when that computer got filled.
oh baby
thank u for all ur videos man ur a hero i mean it also just wondering what ur specs are?
There are no limits such as from -3 to +3. For example LOD Bias of +2.5625 has a hexadecimal code 0x00000029 (column to the right from the settings), LOD Bias of +3 has a hexadecimal code 0x00000030 and you can change this hexadecimal code instead of the settings (middle column which has values from -3 to +3). This way if you put 0x00000031 it will give you an LOD Bias of +3.0625. This way the 'clay value' (0x00000078) is just a very high positive LOD Bias and it is NOT the highest. I have tested this feature extensively in bf4 and there is a very slight but visible difference when using values higher than 0x00000078 (the textures become even more roblox-ish).
is the 0.1% low improvement using negative lod accurate?
@@ravszee I was only testing the visuals, but I do not feel any difference in terms of performance regardless of the LOD. I have fps counter on whenever I play and in general fps are the same as default LOD, as for 0.1%, same thing, I do not notice any stutters, nor did I when I was playing with default.
How can you change this value? Were you doing this with registry or with Nvidia Profile Inspector
ill try higher and lower values and report back, thanks mate
That thumbnail 🤣🤣🤣🤣👌
For modern warefare 3, and Warezone "3" the clay mode and subsequent mode above it introduce horrible artifacting in ground. From flickering, to weird head tracking texture warping, unlike in Wz2, and Wz1. It's not recommended you use this, not sure if its an issue to SMAA built into the game, or what, but something in the pipeline breaks this and its more distracting than useful.
Good heads up
@@JagsP95 i had the same problem in dmz mwii warzone2
Love that outro song Chris! 🤣
this needs to be set manually when using games with DLSS mods like RE Engine games, but I haven't found any other example where a negative bias made textures look better compared to setting "negative LOD bias" to allow.
your work is great just keep doing what you do
Chris... Cheers!!!!!
Solid Video! Definitely one of the TH-camrs I keep up with to make sure I have the latest & Greatest tweaks for the upper edge gaming; looking forward to the next video!
Clay LOD works perfect for the Delta Force Alpha test... makes the game run better and easy to see the enemies... Gotta try it out... plus you can see thru smoke somewhat.
Is there a way to make it work on Overwatch?
I really like the comparisons on the fan
im not a fan...
as I understand it there's LodAdj in Radeon's registry which can be set by RadeonMod
but it only works until and including GCN (RX5** max)
Only with dx9 graphics api
Love these videos keep em coming
W thumbnail
Hey Fr33thy. Do you recommend Windows 11 now? Seen it in your last several videos.
What QD do you have? I've got the MSI, the picture is preem
ive got the msi also! very happy with it
@@FR33THY awesome dude. have you noticed the VRR flicker? i was digging thru some of your gsync videos and am trying to figure out the best alternative keeping gsync off because it bothers me in some games. what do you use? i think ive settled on Fast Sync + 480hz cap mostly for Fortnite performance mode, then in non-comp games, just enable the in-game VSync or frame gen which I really like. any thoughts?
Edit: specs 7800X3D, RTX 4080
Yeah but every non gsync monitor I've owned has had flicker xD
@@FR33THY Damn. What would you use for an alternative to tearing and stutter with low latency? Flicker on non-gsync hasnt been my experience, but I've had all G/Freesync monitors for the past 6 years. Before that I had non-gaming monitors.
Vsync with a framerate cap
Watching it made live lmfao 🤣☠️
why my pc melting like dat, why it look like coom?
coom down man
Does it work for MW3?
yes
Budget PC builds video update!
clay is the way to go, i dont care about graphics ... but i got huge graphic bugs ingame on the bigmap :/
1 Chris 1 pc
for AMD go to: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD
LodAdj (reg_sz)
for me this is level of detail this use to work 100% on cs go wich is dx9,but now on cs2 it does nothing,if you download RADEON MOD,in the software there is description about this value:
"Mipmap quality setting.
Ranges from -6 to 11. Lower values will cause shimmering, higher values will reduce image quality. 0 is recommended"
thanks so much, now i need to find someone with an amd card
@FR33THY if you haven't found anyone willing yet I have a 6650xt
The amd lod bias only work with dx9 in fact
Hi mate im going to new fresh-install of windows should I drop to w10 or stick with w11 ?
Stay with w11 if you have modern intel cpu
@@kayzen2329 that's simply incorrect, w10 has the cpu scheduler update for 12/13/14 gen also.
omar, its up to you. most of us are switch to w11 now for better features.
@@FR33THY thank buddy I really appreciate your work and the work you put into ur videos keep it up I have decided to go back to W10 have followed your step by step and the PC is like brand-new 👍👍
@@FR33THY oh i didn't knew about that and i always thinked that the cpu scheduler update was only for w11 sorry 😅
If I understand correctly, the script is globally and not on per game basis?
yes
its the same on mw2 and mw3??
yes
Hello the links aren’t working for the optimisation videos mate
use the new guide, use github
@@FR33THYthanks for responding
anyone knows the alternative solution for amd cards?
doesnt work for overwatch 2 >:(
Nice one Chris
is there a performance diffrence between w10 and w11
on my rig no, video incoming at some point
my montor flickers and goes blurrry and in out on LOD clay... anyone know how to stop this?
delete shaders
@@FR33THY i did battlefield 2042 it fine in the lobby then goes to shit in game
@@MJVH777 oh yeah happened to me also
i think the game devs either did this on purpose or the game engine is just cooked
@@FR33THY thanks Freethy I did Negative LOD at -500 on my stretched RES and It looks fricken Awesome! I just loved how the clay made it look like Battle Bit.
@@FR33THY Best thing about it all is I never have to manually put the 3d settings in ever again... when I update driver just run the LOD default script and it's all done for me!!! TOO COOL! THNX
Apply these settings at your own risk. Some Game Devs will ban these settings.
LOD op!!!
no shadows tutorial in warzone pls
the script change all my settings btw not only the 3 that mentioned here , so yah care and take backup
i did mention this in the video :D
no other way to do it sadly, i wanted to import user settings, then save. edit config then import etc
not possible to export with inspector :(
@@FR33THY oh i must missed that xD mb
Shame that it's detectable, and it would be nice if devs decided to deal with this in another way besides banning, but it's a pretty big risk to take if they decide to swing the ban hammer
Wait what ?
ive not been banned on anything yet
what if someone just wants negative to make the game look better... hmm
Name a single game that has BANNED for lod bias
What about amd gpu?
derp
Doesn't appear to work on counter strike 2, it gets an nvidia error because of the read only setting
16:45 mega earrape warning.
Make this for fortnite
this will be bannable, cant think of why it wouldnt, especially the clay
frist🎉
💀