This is what makes your channel cool, real work going down. Some bought not built, however others built not bought. Whether you're doing it all on your own is not extremely pertinent, you're participating and learning as you go, good job.
What is the difference on the mark viii engine and the cobra engine? Also, what all dis you need to change to make it work with your mustang? Im looking to buy a mark viii swap aswell since they are cheap
Andrew the gasket set you need are very hard to find. I have a set of brand new lower ones imrc to head. The uppers are still made but lowers aren't any more.
So where does the dipstick tube and everything go? I have everything together for mine after my engine just go rebuilt and everything. I'm just trying to figure out if it goes behind the headers or in front?
Just stepped in after detailing the Marauder, watching an episode of Wheeler Dealers in which they're restoring a Falcon Ranchero, flipping through an old Mustangs and Fast Fords whilst pricing parts for the F100 online. Then I get an alert for this video. There's an ongoing trend in my life.
yes andrew the engine is coming along great! can't wait till you fire it up for the first time! don't know if i asked you this how much are the shirts?
Hello Andrew I just bought a 03 cobra it runs good in idle but when I accelerate a pinging noise in the motor only whe I accelerate and I have no power any idea what it is and how to fix it
This is my question I just bought a 03 cobra the cars has detonation pre ignition pinging noise it runs good in idle only whe I accelerate you hear the pinging noise and I have no power any idea What to look at and how to fix it
So the Mark VIII engine bolts up to AOD? I was always told it did not. I am getting ready to convert my 96 Thunderbird to carb if the Mk 8 engine will actually work I can have one right now and do the carb conversion to it instead of getting PI heads worked (I know but I want that cammed up lope that only carb can give) Awesome video. I rarely miss FL but seeing the Hardees by the PO fountain made me jealous
Hate to be that "GUY" but banging on a harmonic balancer with a hammer, even using a block a wood is big "HELL NO"!!! You can damage the thrust bearing. It may not show up right way but it can ruin the engine. Sometimes damage takes as long as 20k to 30k
Mustang Lifestyle awesome man. Some good rods and big boost it will be an animal. John mohavetz comp eliminator car runs 5.8 qtrs been 6.0 with stock crank. Twins on that thing be unreal
нет с шестеренкой вместо цепи старые двигатели смотрятся интересней.. все делается сложнее...понятно..сотни автосервисов нужно обеспечить работой каждого..
Hello Andrew so the diagnosis of the terminator is actually called (detonation preignition pinging noise) here a video what it sounds like th-cam.com/video/JA0cH_vRABg/w-d-xo.html I ask you because your knowledge on the Terminator surpasses mine
It's obvious that he doesn't want to do the research in helping you to answer your question. With all this terminator knowledge, you think he would know. I'll help you. Detonation preignition pinging noise:It's a condition that happens to a lot of cars, the way to fix it is to start by changing the spark plugs. I recommend that you use a product called gumout to clean the inside of the engine. Then, put it in the gas and put it inside the intake while the car runs, let me know if that works if not, send me a message.you konw this TH-camr ask alot for their fans but they won,t help you . you should unsubscribe from his channel.
Are you building a bird house or installing a seal! Use the actual tool ( chunk of wood) and waylay that sum bish indere . see you used the seal driver to install the front balancer .and you failed to torque the front cover ...... What the heck man, Yee all over the place. Lol
Mustang Lifestyle you want something that cleans aluminum then use wheel acid. Spray it with water then wheel acid. We use it in the race engine machine shop. Scrub it with a stick brush. Not to say e is nasty but shop boss would shit a brick if anything didn't look new. Our engines could have been left out in the rain open but when the customer gets it back it looks new even iron parts
This is what makes your channel cool, real work going down. Some bought not built, however others built not bought. Whether you're doing it all on your own is not extremely pertinent, you're participating and learning as you go, good job.
man i love nicks shop. you can tell he put everything to his liking, so sick
Thanks for doing something different from everyone else on TH-cam. Which is hard to do.
H1GHD3FF I second this comment.
What is the difference on the mark viii engine and the cobra engine? Also, what all dis you need to change to make it work with your mustang? Im looking to buy a mark viii swap aswell since they are cheap
Andrew the gasket set you need are very hard to find. I have a set of brand new lower ones imrc to head. The uppers are still made but lowers aren't any more.
So where does the dipstick tube and everything go? I have everything together for mine after my engine just go rebuilt and everything. I'm just trying to figure out if it goes behind the headers or in front?
Love mustang lifestyle me and my ‘96 gt convertible will be at mustang week next year hope to see you guys there and meet you and your bad ass rides!
I'm doing a 5.4l dohc swap and wanted to know if there are any headers out there that will remotely fit or will I have to use the stock manifolds?
Just stepped in after detailing the Marauder, watching an episode of Wheeler Dealers in which they're restoring a Falcon Ranchero, flipping through an old Mustangs and Fast Fords whilst pricing parts for the F100 online. Then I get an alert for this video. There's an ongoing trend in my life.
yes andrew the engine is coming along great! can't wait till you fire it up for the first time! don't know if i asked you this how much are the shirts?
+Jeffrey Goss they are $25 with shipping
Can't wait to see it in the turd! Been too long since it has been on the road!
Gettin it done🤘. Can't wait to see Zilla rollin again.
So satisfying
TheReal NateDogg yes very, I put my 4.6 together not long ago and its very satisfying when all the parts go in
can't wait for the next video bro hopefully he up loads again tonight
Can a mark 8 Motor fit in my Mercury Marauder 03? If so what all do I have to change
Where is this shop located at I know it Florida but where I would drive my mark viii over there I don't trust nobody with my motor
Hello Andrew I just bought a 03 cobra it runs good in idle but when I accelerate a pinging noise in the motor only whe I accelerate and I have no power any idea what it is and how to fix it
I cant wait until the final product!
Dude I'm excited to see turdzilla back on the road. Keep the vids coming bro
Did you replace the rear main seal? if so can you show that
Why swap in a 03 cobra crankshaft into that lincoln mark 8 engine?
This is my question I just bought a 03 cobra the cars has detonation pre ignition pinging noise it runs good in idle only whe I accelerate you hear the pinging noise and I have no power any idea What to look at and how to fix it
+rcguy86 it could be spark plugs, fuel filter, coils, vacuum leak, or tune. It’s hard for me to tell you what it is without video or other symptoms
That gto need some pistons and rings....why? Cus they all need pistons and rings or cams or and lifters or heads or oil pumps or......
Lookin good buddy, keepem coming !
I thought it was a good idea to put some silicone around the crank pulley bolt so it wouldn't leak oil
Is that a cobra or a mark viii engine?
I'm really looking forward the the 2v tear down as I have a 2v in my car. Engines always intrigue me 😍
+Cigz Much we will
Can't wait
DID YOU HAVE TO CHANGE THE OIL PICK UP TUBE??
Yes we used the cobra one
what trans are you going to use with the new motor?
+Sean Colon t45
Ahhhh yeah!
My clean is every part is tank cleaned hot tanked and or glass beed
At 8:27 that mod motor be talkin to ya
So the Mark VIII engine bolts up to AOD? I was always told it did not. I am getting ready to convert my 96 Thunderbird to carb if the Mk 8 engine will actually work I can have one right now and do the carb conversion to it instead of getting PI heads worked (I know but I want that cammed up lope that only carb can give) Awesome video. I rarely miss FL but seeing the Hardees by the PO fountain made me jealous
I want to do the same to my 97 lx
Why carb it every thing bolt's directly up
YOur almost there
I wouldn't out anything back on it that could have came cleaner. Wheel acid is your friend
how much to do a coyote swap in foxbody?
Never pound a harmonic balancer on!!!!
I saw the Alfa 164 in the background... ;-)
What's going on with Ashley why is she not in the vlogs anymore
Did you guys have to change out the freezer plugs??
Steve H freezer plugs?? Wut in tarnation?
allen cox under headers on the block they look like half dollars they can go out and are a pain to replace when the engines on
allen cox pause at 1:00 and you will see the plugs at the bottom of screen. I think it's 3 on each side and 2 in back of block
Yes,I was just pointing out the fact that you called freeze plugs,”freezer plugs”..😂
allen cox you son of a bitch lol I had a feeling you were fucking with me
I love it very good
I support this channel for a long time but they won't even answer one question
+rcguy86 I didn’t see a question in this comment?
Red hot tamale degreaser :o
Nice! Question, are you doing the rear cooling mod?
That mustang of yours is all show and no go , your going bald son !!
I heard you using the C.R.A.S.H. Theme from GTA SA unless my ears were tricking me
how do I get in contact with him?
+Cory Dennis Facebook page link in the description
Make a video on taking the engine off turdzilla 😁👍🏼👍🏼
Hate to be that "GUY" but banging on a harmonic balancer with a hammer, even using a block a wood is big "HELL NO"!!! You can damage the thrust bearing. It may not show up right way but it can ruin the engine. Sometimes damage takes as long as 20k to 30k
"Basically"
Hurts my eye on that crank seal install
Teksid block right?
+Jason Jennings yes
Mustang Lifestyle awesome man. Some good rods and big boost it will be an animal. John mohavetz comp eliminator car runs 5.8 qtrs been 6.0 with stock crank. Twins on that thing be unreal
Mustang Lifestyle are gonna boost it and go e85?
Wassup drew!
More of that goat lol😍
What’s with the background noise??
That degreaser is actually floor soap.
GTO="Get The Oil!" Or "Gets To Overheat".
Fordman7575 GOAT Gas Oil And Tires
Get To Overhaul, general's Terrible Orphan, Going Thru Oil, Gets Towed Often, Goat Turd Odor
Just outta curiosity, what happened to Jeff Ashton?
Andrew I think you need to make some shirts with this "what happened to jeff"
Just wondered because he hadn't posted in a couple weeks till last night.
my name jeff
нет с шестеренкой вместо цепи старые двигатели смотрятся интересней.. все делается сложнее...понятно..сотни автосервисов нужно обеспечить работой каждого..
Hello Andrew so the diagnosis of the terminator is actually called (detonation preignition pinging noise) here a video what it sounds like th-cam.com/video/JA0cH_vRABg/w-d-xo.html I ask you because your knowledge on the Terminator surpasses mine
That video doesn't help. You should record your own video.
It's obvious that he doesn't want to do the research in helping you to answer your question. With all this terminator knowledge, you think he would know. I'll help you. Detonation preignition pinging noise:It's a condition that happens to a lot of cars, the way to fix it is to start by changing the spark plugs. I recommend that you use a product called gumout to clean the inside of the engine. Then, put it in the gas and put it inside the intake while the car runs, let me know if that works if not, send me a message.you konw this TH-camr ask alot for their fans but they won,t help you . you should unsubscribe from his channel.
thank you.you know i will
Are you building a bird house or installing a seal! Use the actual tool ( chunk of wood) and waylay that sum bish indere . see you used the seal driver to install the front balancer .and you failed to torque the front cover ...... What the heck man, Yee all over the place. Lol
You mean gtslow
Jason Jennings lol hey can't a guy have some fun
that slow goat yeah but come on why not put jk at the end cause I know you know better lol
Jason Jennings lol my bad
that slow goat nothing wrong with a lil fun lol
"Chevy GTO"
Stop calling it turdzilla,are you guys five years old
First
end of the year this engine will be crap
AL what makes you think that?
One problem I noticed...not a good idea to leave out a windage tray. Oil froths, overheats and splashes everywhere...engine will lose power.
tomkjr1 specially on boosted apps
+tomkjr1 there isn’t an option to use it. Mark vii engine doesn’t come with it nor does it have provisions for it
Mustang Lifestyle you want something that cleans aluminum then use wheel acid. Spray it with water then wheel acid. We use it in the race engine machine shop. Scrub it with a stick brush. Not to say e is nasty but shop boss would shit a brick if anything didn't look new. Our engines could have been left out in the rain open but when the customer gets it back it looks new even iron parts