ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2020
- How to make Piper J-3 Cub RC Plane out of foam at home. DIY ASMR no talking tutorial step by step build video.
Wingspan: 1,19m (47")
Flying Weight: 259g (9 oz)
Materials: 3mm, 5mm XPS foam / Depron
Motor: AEO MF1904 2500KV (16g)
Propeller: 7035
Receiver: FlySky FS-iA6 (7g)
ESC: 12A (14g)
Servos: 5g x 4
LiPo battery: 600mah 7.4V (39g)
Download Piper J 3 Cub RC model plane free plans: numavig.com/plans/Piper-Cub/
P. S. Fuselage nose (battery compartment) better done like • How to make PZL Wilga ... - แนวปฏิบัติและการใช้ชีวิต
What kind a glue is that???
copolymers of vinyl acetate
@eimb1999 needed glue for expanded polystyrene. I don't know what is available in your country, may be "UHU Por" or others
@@NumaVIG Foam safe cyanoacrylate
uhu por is the perfect glue for that purpose
You can search for this online or check your local big box stores
EPS Foam Glue 8 oz Styrofoam Polystyrene Foam Weatherproof Glue on eBay or Amazon.
Excellent craftsman ship! Wuderbar!
Hey Numa! You can cover some parts with packing tape before gluing them, especially the wing - it's way less fragile when forming so you don't have to worry about braking and tape remains tightly strechted on surface :) Ironing it is a cool trick too. Thanks for good videos ;)
I always enjoy your ASMR building. Especially while cutting through the crispy foam . And you got skills man. All your works look like machine made models 👍
Another masterpiece of ART! and what a technique! Thank you so much for sharing!
Great build techniques and design, very nice!
Beautiful work, dude! Really nicely done! 😃
Thanks for the video and the plans! Great work.
That work is amazing, super talent
Very nice. I thought it was an actual store bought product by the thumbnail.
Subscribed.
The best ever. Thanks for this. Congratulations.
Excellent video, Nice sharp knife, clean edges. Didn't seem to fly that well though looked like CG was out.
Thank you so much for sharing the plans my frent Numa Vig
Nice plane, it's so relaxing when i'm watching your build video. Thanks for sharing, appreciate it 👍
Your videos are edited so expertly are you the camera man ? Expert building! Thanks much for sharing you have made my day warmer here in Michigan . It's a snow day .
Видео супер всё аккуратно сделано очень красивый самолёт ✈️ 👍🏼👍🏼👍🏼
como siempre otra maravilla de poryecto, muy perfeccionista, es una verdadera obra de ingenieria. un saludo y me encanta tu canal con estos videos
I love your videos so cool how you make these planes. 👍👍
Beautiful
Show fantástico 👏👏👏 muito bom parabéns.
I like piper j 3 cubs thank you so much
Wow that's a better technique its much lighter and fly s better good job
nice plane
Another great build and fly video, very impressive attention to detail.🤗
the glue looks like styrofoam and eva glue, nice work as always
Your design and engineering skills are outstanding, crisp, and accurate, resulting in superb fit and finish. BTY, was it nose-heavy during the maiden? I recently repaired a La Petit that flew like that but could not hang onto it long enough to figure out what was happening.
Дуже гарно получилося удачі в роботі
Good job! 👌
👍 I built one back in 1990 with a K&B 45 Nitro👍
Must have been quite a bit heavier
Спасибо
So nice
very cool!
You made it well. The center of gravity looks a bit disappointing. I want to make one too...^.^
Lathe tools as weights ??? Now I understand the attention to detail......nice plane
Top parabéns
Nice work :-)
thank you but the plane itself measures how many inches. thank you for your reply
complimenti
ขอบคุณ มันสุดยอดมาก
cool
Hello, how exactly did you set up your mixes to have flaperons? Did you manage to compensate on the elevator too? I ask because AFAIK the FlySky I6x has only 3 mixes, and it's difficult to achieve certain settings with so few...
watch my video about Flaperon mix
Dobrý den, chtěl bych zeptat čím polepujete model. Myslím tu žlutou pásku kterou potom žehlíte. Děkuji krásná práce
Sir. have you given thrust angle & turk roll....in this plane.....? if yes.....then how much.......? please..
Hello, great job very clean and precise but could you tell me if the plan is in A3? And what dimensions has the plane to see how to print the plan, thank you in advance
jpeg - A3 (297×420) pdf - A4
Great job. Thanks for sharing, also it would be nice if you can share the setting on the transmitter.
What setting?
@@NumaVIG how you set the elevation, throttle etc
Koolightcool you can get settings in the Cessna video NumaVIG sent, just search up Numavig Cessna skip to the end where he tests it and the settings video should pop up on the screan
Thought about making the same model, same size into a rubber powered job?
will it be the depron and glue can be find in amazon
Outstading work ! So much effort is put in tiny details ! It must take a very long time to build it while filming it.
I build RC planes as well, but way simpler ones and out of solid XPS.
How much flex do you have with your very long pushrods ? it helps that they are out of carbon, but the amount of flex is increased by the lenght power 4.
How did the flight go ? it looked stressfull, dial a bit of expo maybe.
it's not aerobatic plane, flexible pushrods doesn't affect the flight
Great job!! Please can you tell me what is the length of the fuselage witouth motor? Because somting is wrong with my plans. On your video the fuselage seems to be bigger or you have small hands 😁😁.
Thank you for your time!
length of the fuselage without rudder must be 68 cm if you print in actual size 100%
Would you consider building a micro r/c airplane in the future?
Then how did you plan the length of the wing I did not understand that part
Bonjours superbe travail mais je ne comprend pas il n'y a pas de de lien pour télécharger les plans.
POUR UNE ENVERGURE DE 1m60 FAUT IL TOUT MULTIPLIER PAR X, EST QUEL FACTEUR DE MULTIPLICATION ?MERCI
Very impressive! What kind of flight times are you getting on that battery?
15-20 min
How do you get CG with a small battery ... because I make not enough weight
Nice build,very interesting.What store is that were you bought your Depron and glue?. Are you based in Europe?
Castorama
It is very nice but I have an problem while printing the plans it comes smaller and bigger. Can you tell each size of pdf
Page which size you printed from your printer
actual size
Your planes are super but my country doesn't have small brushless moators,and small electronic .next time can you make little bit big plane
Can i use 1000 kv bldc motor and 1500 mah battery
Ты художник. Привет из Сербии.
По ощущениям, посадка была жесткой, сильно не угадал с центром тяжести. Цел остался?
нос помят, надо вдоль распорку снизу добавить
nice build. where can I get the plans from?
in description below video
Can i know what motor u use and prop and battery what size
i have always wanted to build something tangible like a drone or RC plane but i just cant(apparently where i live those components are expensive AF)
İ aggree with you. They are so expensive but i have bought those components and made it. Believe me it's worth it.
I don't think they are that expensive. Of course you need transmitter and receiver for start but those are components that you are going to use in many machines. As for the drivetrain, you can get set for less than 20$ easily if you buy directly from China (other parts too). The only disadvantage is wait time but this is something that you should be able to get used to after few first purchases.
Батарея перевешивает?
what camcorder do you use?
Will it flay with 2212 1000kv moter and 10×4.5 propeller and 3s 2200 mah battery and 30A esc
yes of course, like a flying brick 😄
@@NumaVIG Thank you👍
what motor series are you using
Where's plan landing gear?i don't find it on the link
Поделись пож опытом с начинающим )) Как ты так настроил подкрылки на посадку ?
в том месте подсказка на мое видео про Флапероны
Спасибо, смотрел на ТВ боксе там не вылезают такие ссылки.
NumaVIG I think I scaled mines a little bigger the only problem is I don’t know what my wing span should be
wing scale 1:10 look at the small wing in plan and measure it
Is that just simple 3mm and 5mm foam board, what you use?
XPS foam
Подскажите, как называется материал который Вы используете вместо потолочки
подложка под ламинат, все же видно начиная с 0:18 даже ценники
На сколько я понял она у Вас абсолютно гладкая? Размеры 1200 на 500?
can you help me in making a pc91 plane according to its original form and make a video please
We've 47 inches long and if that section doesn't lengthen we can get any length we want
i m going to build that monstrum is it worth it???
I build this plane ! He is really too tail short ! Really a mess and loss time, can’t fly properly.. if you build it my advice is build a longer tail .
Which materia are you using to make body
XPS
Hola perdón cuanto mide de largo el ala que no se donde lo pone pf contesta
Hi, the wing was made with depron 3mm?
yes
Thanks for the quick reply! You rock! I have two more questions... Is it okay to use a sg9g servo? Also what is the plate that you used to hold the motor?
0:48
What about the sg9g servos?
I use 5g servos on 300g planes, but you can use whatever you want
Hola cuanto mide de largo el ala que no se donde ll pone pf contesta
Dove trovo la colla Titan wild ?
As someone who has sliced both of his thumbs open, 9:45 makes me very nervous.
Nose heavy in the test?
what type of glue are you using?
copolymers of vinyl acetate
in the video you can see that when you measure the side member to form the drop of the wing I speak of the second you measure 1.5 cm while when I go to print naturally on A4 paper it measures 1 cm for what?
what minute of the video?
@@NumaVIG 6:53
.jpg need to print A3. A4 is only for .pdf all plans is actual size (100%)drive.google.com/file/d/1G2SWgyfttD2nKJbNcCIyFR34NMD4Xe1L
@@NumaVIG sorry I was wrong to print anyway already almost finished the plane came much smaller I'll let you know if it flies hope for everything thanks hello
What is the iron temperature when you are ironing packaging tape?
as high as possible so as not to melt the foam
@@NumaVIG do you happen to have any program knob on it? Could you let me know what program is that or what temperature? Or how many dots are by the knob indicator?
take a small piece of foam and try
Can someone help me out. I printed the plans on a4 the fuselage length is 50cm surely the wingspan of 119cm is huge for plane or am I missing something .
print in actual size
@@NumaVIG can you tell me how to do that. I see no options in print settings. Thanks
@@keers76 print ONLY pdf in A4
@@NumaVIG thanks worked a treat 👍
Flying time??
Kaiaaaa
What do you study?
i can replace by 2204 motor with 6045 propeler and 3 servo 9gram, 3s 850mah lipo battery
6045 prop too small
@@NumaVIG when i test 6045 prop with 2204 motor. Thrust test is 600+gram;>>
www.google.com/search?q=how+big+should+rc+plane+prop+be
@@NumaVIGso i print plans on A5 paper, so i had plane wingspan 60cm, i had 1404 4600kv use 4025propeller. It can fly(esc 12a and 3s lipo battery 450mah)
can fly or can fly better, choose yourself
Which parts are 3mm and which are 5mm? I think you only use 5mm, Am i right?
3mm used at the wing only
Do you print on A3 sheet?
all plans in actual size
you can build one f-22 rc plane or mustang ?
soon I will start making a series of WW2 fighters
@@NumaVIG Good,with plans?
Do you sell all your plane
Уважаемый вы в каком регионе России? Если не секрет конечно) скрачбилд весьма на высоком уровне! Респект!
Wtha is scrach build?
Fusilag size ...
Please link to buy these deprons.
Onde eu encontro o material , se vc pode me responder eu agradeço .
Что это за жёлтый скотч такой?