Viendo otros relojeros que hacen el mismo trabajo, quizás a este le falto un poco más de detalle. Tampoco se ven las maquinarias que tienen otros para limpiar los metales. En fin, vale el esfuerzo, no debe ser fácil, pero le faltó un poquito más.
@@prideinwatches i need some help brother what kind of resign you use for cleaning parts the brown liquid and the white (transparent) liquid thanks brother in advance
From a fellow watchmaker with 20+ yrs experience may I inquire what that "magical elixir" is you use to "clean" the parts in? Looks like gasoline to me? Whatever it is I'd like to buy 5 gallons of it to "clean" my dirty/rusty watch parts (and engine parts) in. Also, how is it that the balance cock screw looks to have rusted in half but the steel hairspring was able to be reused? Luckiest person on the planet......
You got it running but didn't finish cleaning or removing the corrosion. This can be seen in the low amplitude. The mainspring was not "set" or out of shape so you have more dirt or worn parts that need to be attended to. Taking peg wood to the jewels would also help... or adjusting the amount of oil used. Did you oil??? Good job getting it running though. It looked like someone oponed the caseback and dropped dirt inside.
Holy hell - recovered from the Titanic or what? Looks like it spent the last ten years in a well. Nice work restoring some measure of her rightful dignity.
I'd change the crown stem and crown wheel was a bit wobbly. On the watch dial side, maybe a bit more polish for hands. As I saw the movement before the restauration, I thought that only the main plate could be rescued. All in all lot of good work has been done.
Boa noite colega qual nome desses líquido amarelo, e outro q vc refaz a segunda lavagem das peças do relógio, q vc tira todos ferrugem da máquina qual nome porjetileza?
I don't think this watch was found in a drawer. I think it was buried beneath hundreds of meters of sediment and found as part of an ancient greek digsite.
There is a fake account replying to the comments about give away. Please ignore such kind of comments. We are trying to report such accounts & block them from our channel.
You have already damaged the dial. Senator is faded after cleaning. You should know that dial should be cleaned without any liquid.But afterall nice work.
Thank you very much for your comment. Rado anchor does rotate if it is cleaned properly. Even it rotates by itself in the dial just like the rotor with gravity. In this case it won’t rotate by itself as the corrosion couldn’t be cleaned up.
Great work. I have got a very rusty seiko movement that want to restore. But due to heavy rust i couldn't disassemble the movement. Do you have any suggestions how can i remove rust?
Hi, Thank you for your comment. Try using little amount if DW-40 on the screws & let it sit there for few time. You should be able to unscrew them afterwards.
hello....can i ask how you get all your replacement parts? did you order them by the manufactor? always ask myself if you can really order all the old parts. nice video...thx
Non esiste in un orologio con fondello a vite e guarnizione tutta quella terra al suo interno, ma per favore. Chi ti scrive è un orologiaio professionista da quaranta anni
That definitely was not the dust in it but it was lose rust. As you must know that rust eats the metal & all the debris came out of the watch was that metal chunks destroyed by the rust.
Бессмысленная работа, посмотрите под микроскопом на цапфы колёс, у часов с коррозией все в раковинах будет. Эти часы нормально ходить уже не будут, что мы и увидели на приборе. 212 градусов при угле 52гр, а там угол наверняка ещё меньше, так что реальная амплитуда вообще под 180. В таких случаях меняется механизм в сборе. Нужно ценить своё время и деньги заказчиков
Hi, thank you for your kind words. The yellow liquid is called mercury lotion which is used to clean and loosen up the dirt, grime or dried up oils on the wheels or on the jewels. These parts then can be cleaned in a clear alcohol based solution preferably isopropyl alcohol.
extremely professional
Как были раздолбанные и ржавые, так и остались.
Huuuummmm....!!!! Restauración, o simple arreglo rápido...?
Viendo otros relojeros que hacen el mismo trabajo, quizás a este le falto un poco más de detalle. Tampoco se ven las maquinarias que tienen otros para limpiar los metales. En fin, vale el esfuerzo, no debe ser fácil, pero le faltó un poquito más.
I noticed that the day indicator ,the days of the week and face faded. Can you get them refinished or just replace them?
The 2789-1 was my first attempt. I obtained a 2789 like this one. I'll follow your lead and try this one. Thank you.
Thank you very much. Do let us know if you need any kind of help in it.
@@prideinwatches i need some help brother what kind of resign you use for cleaning parts the brown liquid and the white (transparent) liquid thanks brother in advance
@@prideinwatches and where i can buy brown liquid in Pakistan
Hi, yellow liquid is called mercury lotion. It can be purchased any watch shop who also sell watch repair tools.
@@prideinwatches mercury is toxicity , you will get poison , don't use it !
From a fellow watchmaker with 20+ yrs experience may I inquire what that "magical elixir" is you use to "clean" the parts in? Looks like gasoline to me? Whatever it is I'd like to buy 5 gallons of it to "clean" my dirty/rusty watch parts (and engine parts) in. Also, how is it that the balance cock screw looks to have rusted in half but the steel hairspring was able to be reused? Luckiest person on the planet......
Y didn't U clean the screws after cleaning them of rust stains.
Wut can I do 4 u buddy
I’ve done one this badly corroded and basically soaked it in w-d overnight… yes the entire movement and it worked like a charm… thanks for posting
You got it running but didn't finish cleaning or removing the corrosion. This can be seen in the low amplitude. The mainspring was not "set" or out of shape so you have more dirt or worn parts that need to be attended to. Taking peg wood to the jewels would also help... or adjusting the amount of oil used. Did you oil??? Good job getting it running though. It looked like someone oponed the caseback and dropped dirt inside.
I agree, its a fake restore ‼️
hello sir, i m also watch repairer from india.... so sir i like ur work very much, i appreciate.... well done, great work, good job..... ☝️👍
Thank you very much.
Holy hell - recovered from the Titanic or what? Looks like it spent the last ten years in a well. Nice work restoring some measure of her rightful dignity.
Sin restauracion de esfera no hay restauracion
I don’t get it. What is the sawdust looking stuff inside the watch?
Nice
Desde Colombia con cuál líquido limpió el dial?
Distilled water was used to clean the dial.
The yellow on is mercury lotion which help in cleaning dried up oil & dirt.
2798 а под балансом написано 2789
2798 and under the balance it says 2789
Very strange aded “ dirty eh 😅. No way was like that come on !
Nice Video
Thank you.
I'd change the crown stem and crown wheel was a bit wobbly. On the watch dial side, maybe a bit more polish for hands. As I saw the movement before the restauration, I thought that only the main plate could be rescued. All in all lot of good work has been done.
Anda sangat hebat bisa memperbaiki jam separah itu..
what happened to the anchor, because it does not move or is not original
Rado anchor does rotate on genuine dials. Even these anchors rotate freely with gravity.
Ready for Ebay
Allah aap ko success de bht hi umdah kam kia sir worth watching your videos brother. And also sub's
Great job. Really great job.
Greetings from Ukraine
All that rust on the brass, but none on the steel springs?.
Sir,Nice work done. Which Solution do you use for parts cleaning? (I'm Uday Rathod from India -Gujarat)
Wonderful to watch. I really liked your lighting and clear visuals. I liked how you take care with the components.
exellent work
Boa noite colega qual nome desses líquido amarelo, e outro q vc refaz a segunda lavagem das peças do relógio, q vc tira todos ferrugem da máquina qual nome porjetileza?
Interesting
Yo, the dial is round. 🤯
Exactly, that’s what I thought 😂
Well done ✅
MashaALLAH!
Thank you so much
I don't think this watch was found in a drawer. I think it was buried beneath hundreds of meters of sediment and found as part of an ancient greek digsite.
I agree whole heartedly 😅
Great!!!
Детали механизма меняли или нет?
По циферблату и стрелкам всё печально.
Большую работу провели, а часы носить не хочется, вида нет.
sorry dude but that looks horrible
Nice job! You definitely brought out the best in it.
Time is a dead god Thoth 💐🌑👍 rest in the good news 💐 Okay bye
Piękna robota, reanimacja trupa. W Polsce taki zegarek na chodzie kosztuje około 700 zł. 1/5 pensji
Love it 🥰
Harika oldu başarılar
Would you tell me how much you spend on spare parts you have bought ?
Çok güzel bi çalışma,yüksek emek ve başarı 👏🏻lakin saatin içi tam olarak temizlenemedi bu sefer
You asked everybody contact you what for ?
There is a fake account replying to the comments about give away. Please ignore such kind of comments. We are trying to report such accounts & block them from our channel.
@@prideinwatches I see
You have already damaged the dial. Senator is faded after cleaning. You should know that dial should be cleaned without any liquid.But afterall nice work.
Amaziing restauration
Thank you very much
Nice shots and editing. I never knew the Rado anchor symbol could rotate in the dial.
Thank you very much for your comment.
Rado anchor does rotate if it is cleaned properly. Even it rotates by itself in the dial just like the rotor with gravity.
In this case it won’t rotate by itself as the corrosion couldn’t be cleaned up.
@@prideinwatches cool, didn’t know it could do that. Thanks!
Excelente reloj sol Eugenio muere con un reloj así
Where are you situated in Pakistan? Good work.
I'm vinod kumar from India you are good👍 main
Hi, Vinod! Thank you so much for commenting.
Great work. I have got a very rusty seiko movement that want to restore. But due to heavy rust i couldn't disassemble the movement. Do you have any suggestions how can i remove rust?
Hi, Thank you for your comment. Try using little amount if DW-40 on the screws & let it sit there for few time. You should be able to unscrew them afterwards.
@@prideinwatches thank you very much for your tips
❤
Nhìn cảnh này o bao giờ dám mua ĐH đã qua sử dụng không khéo sẽ bị tiền mất tật mang
I’m afraid I’m not convinced this watch needed saving. It appears it was intentionally sabotaged for the purpose of the video.
Really well done job. Unfortunately, the flaws in appearance do not allow you to enjoy the results of a lot of work.
👍
you do the right job, but the watch still not look good, special the hour/ minutes head.
hello....can i ask how you get all your replacement parts? did you order them by the manufactor? always ask myself if you can really order all the old parts. nice video...thx
Thank you for your comment. I can source these parts locally, from fellow watch makers.
WOW, that watch was in bad shape when you started. Unbelievable transformation 😮
Non esiste in un orologio con fondello a vite e guarnizione tutta quella terra al suo interno, ma per favore. Chi ti scrive è un orologiaio professionista da quaranta anni
That definitely was not the dust in it but it was lose rust. As you must know that rust eats the metal & all the debris came out of the watch was that metal chunks destroyed by the rust.
@@prideinwatches ok perfect thanks
Naw, they found this shit on the bottom of a river
Ben de geleyim yardıma size
I would not undeserved it.
Weldon,. This was too much rusty. Good efforts to restor
Thank you so much
Really sad restoration on this Rado. Big deal that it runs, it still looks like crap.
i m abdul sattar pakistan
In which city of Pakistan are you located? I have a watch that I would like to get serviced from you.
We are from Rawalpindi. You can contact us on whatsapp. Contact details are mentioned in about section.
Бессмысленная работа, посмотрите под микроскопом на цапфы колёс, у часов с коррозией все в раковинах будет. Эти часы нормально ходить уже не будут, что мы и увидели на приборе. 212 градусов при угле 52гр, а там угол наверняка ещё меньше, так что реальная амплитуда вообще под 180. В таких случаях меняется механизм в сборе. Нужно ценить своё время и деньги заказчиков
Bien por tirarle wd40 !! Saludos de Argentina.
Affreuse montre, Berk..
Congrats, you found the worst watch in the world! Runs nice now!
Халтура
need music or talk a bit
Amazing work
Sir,Nice work done. Which Solution do you use for parts cleaning? (I'm Uday Rathod from India -Gujarat)
Hi, thank you for your kind words. The yellow liquid is called mercury lotion which is used to clean and loosen up the dirt, grime or dried up oils on the wheels or on the jewels. These parts then can be cleaned in a clear alcohol based solution preferably isopropyl alcohol.
@@prideinwatches Thank you so much for your reply sir...
👍